Already in use by the maximum of 2 computers.

CS6 downloaded and installed on one laptop but cannot validate with license key as system gives this message it is already in use by the maximum of 2 computers and that I need to deactivate another computer within 32767 days to use this product
This is not the case I have only downloaded it onto 1 machine. it gives me 2 options:1) retry activation, I have already deactivated 1 machine or 2) provide a different serial number. What should I do?

Contact Adobe. Nobody here can help.
An online chat should be enough to get it straightened out.

Similar Messages

I'm trying to set up my iPad2. I am entering my Apple ID and get a message that says "try another apple id, this ID is already being used. The only time I've used this Apple ID (my email), is when I bought a mac for my college student.

I'm trying to set up my iPad2. I am entering my Apple ID and get a message that says "try another apple id, this ID is already being used. The only time I've used this Apple ID (my emal) was when I purchased a mac for my college aged child.

Thank you...I had selected the incorrect option to create an Apple ID....so backing up a few pages and doing as you stated worked!

CRS-5005: IP Address: 1*.9*.1*.3 is already in use in the network

Hi,
I'm in a bit of a mess here. I have a two node RAC environment that as of yesterday was working fine. We bounced the node 1 server and ever since the cluster VIP is not starting on node 1.
When I run ./srvctl start vip -i db01-vip I get the following error.
PRCR-1079 : Failed to start resource ora.db01.vip
CRS-5005: IP Address: 1*.9*.1*.3 is already in use in the network
CRS-2674: Start of 'ora.db01.vip' on 'db01' failed
CRS-5005: IP Address: 1*.9*.1*.3 is already in use in the network
CRS-2674: Start of 'ora.db01.vip' on 'db02' failed
CRS-2632: There are no more servers to try to place resource 'ora.db01.vip' on that would satisfy its placement policy
I have tried rebooting the box
I have checked the interfaces with ifconfig and nothing is using the VIP address.
I have stopped and started all oracle processes.
I have tried srvctl stop nodeapps -n db01... ifdown eth2... ifdown eth2.
I can ping the IP.
I have tried disabling the VIP and rebooting.
But all above attempts have failed.
I am still pretty new to Oracle RAC so I'm not sure where to go from here. Any help would be greatly appreciated. Thanks.
crs_stat looks like this:
Name Type Target State Host
ora.BACKUP.dg ora....up.type ONLINE ONLINE db01
ora.DUMP.dg ora....up.type ONLINE ONLINE db01
ora....ER.lsnr ora....er.type ONLINE ONLINE db02
ora....PP.lsnr ora....er.type ONLINE ONLINE db02
ora....N1.lsnr ora....er.type OFFLINE OFFLINE
ora....N2.lsnr ora....er.type OFFLINE OFFLINE
ora.U01.dg ora....up.type ONLINE ONLINE db01
ora.U02.dg ora....up.type ONLINE ONLINE db01
ora.U03.dg ora....up.type ONLINE ONLINE db01
ora.U04.dg ora....up.type ONLINE ONLINE db01
ora.asm ora.asm.type ONLINE ONLINE db01
ora....SM1.asm application ONLINE ONLINE db01
ora....01.lsnr application ONLINE OFFLINE
ora....01.lsnr application ONLINE OFFLINE
ora.db01.gsd application OFFLINE OFFLINE
ora.db01.ons application ONLINE ONLINE db01
ora.db01.vip ora....t1.type ONLINE OFFLINE
ora....SM2.asm application ONLINE ONLINE db02
ora....02.lsnr application ONLINE ONLINE db02
ora....02.lsnr application ONLINE ONLINE db02
ora.db02.gsd application OFFLINE OFFLINE
ora.db02.ons application ONLINE ONLINE db02
ora.db02.vip ora....t1.type ONLINE ONLINE db02
ora.eons ora.eons.type ONLINE ONLINE db01
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE db01
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE db01
ora....ry.acfs ora....fs.type ONLINE ONLINE db01
ora.rsmmig.db ora....se.type ONLINE ONLINE db02
ora....mig.svc ora....ce.type ONLINE ONLINE db02
ora.scan1.vip ora....ip.type OFFLINE OFFLINE
ora.scan2.vip ora....ip.type OFFLINE OFFLINE
Rgs,
Rob

The logical assumption is that some other network device is using the IP address that you have assigned as virtual IP to the cluster.
Have you confirmed that this is not the case?

An error occurred while reconnecting...The local device name is already in use. The connection has not been restored.

Hi,
So I have 2 PC's and I sign with the same credentials. I have a hard drive which I decided to share. In the setting I created permissions for the user credentials of both vcomputers and have full control access.
Basically, everytime I open my laptop after and it wakes up and try to connect to the network drive, I get the error
An error occurred while reconnecting...The local device name is already in use. The connection has not been restored.
I need to stay disconnecting all drives and reconnecting them. WHen I restart my PC the network drives restore perfectly. I don't understand why it doesnt work on wake.
Any ideas?

It seems that when a machine goes into sleep, the network connection is disconnected, naturally, but the machine still has the connection mapped. If you run the 'net use' you will see the connection. When you try to reconnect it, it sees the
connection and gives you the error.
I do not know if you can directly modify this behavior. However, as a work around, you could build a simple script like:
net use 'connection' /delete ( write it into a text file and save it has a .bat file.)
Use scheduled tasks to have the script run right before the machine goes into sleep. You can do so by setting the task to RUN ON Event: event 42 for the KERNEL_POWER source.
You can see http://superuser.com/questions/679195/run-a-script-when-hibernating-windows-8 for more info .

I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

I'm receiving this error message about my Time Capsule:
"The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

1. Open the Sharing preference pane and check that the computer name hasn't changed without your knowledge. For example, if the name was "X's iMac," it might now be "X's iMac (2)". In that case, restore the original name. You may have to click the lock icon in the lower left corner of the preference pane to unlock the settings. Test. If there's no improvement, or if the name had not been changed, continue.
2. If you're backing up to a Time Capsule, or an AirDisk attached to a 2013 or later model AirPort Extreme base station, restart it in either of the following ways:
☞ Disconnect and reconnect the power adapter.
☞ Select the device in the AirPort Utility application and then select
Base Station ▹ Restart
from the menu bar.
If AirPort Utility notifies you of a firmware update, install it.

HT3275 My time machine is sending me messages that the disk image is "already in use" as the reason it can't complete a backup. What gives?

My time machine is sending me messages that the disk image is "already in use" as the reason it can't complete a backup. What gives?

That is our most common error.. ever since Mountain Lion came along with its inability to remember beyond a few hours. where the devices are located.. and so forgets to dismount properly.
Look at the right hand.. More Like This.
A simple restart fixes it. ie pull out the power cord.. count to 10.. plug the power cord back into the TC.
More details C12 here.
http://pondini.org/TM/Troubleshooting.html

HT3275 I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.

Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

TS1550 When backing up my iMac to the time machine I get the following message, 'The backup disk image "volumes/Data/My Name iMac(7).sparsebundle" is already in use". The backup is not completed. Any thoughts on what do to get the backups going again?

The auto backup to my time machine has developed a glitch which prevents the backing up of the iMac. The message is as follows:
'The backup disk image "/volumes/data/Name iMac(7).sparsebundle" is already in use.
Any ideas on how to fix.

Welcome to Apple Support Communities
Restart the iMac and Time Capsule. In most of the cases, this should solve that problem. If it doesn't work, read > http://pondini.org/TM/C12.html

HT201250 My time capsule is not allowing a back up indicating the 'time capsule is already in use'. The system is set to back up and remove the oldest back up so it is not 'in use' as far as can see. I believe something is in error. Thoughts?

I am new to this capability. My problem is that my time capsule is not allowing a back up and indicates, The Back up 'is already in use' yet I have made no changes since I set the system up and now I am seeing this failure. Thoughts?

Thoughts?
Bugs in Mavericks.
Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes, then try a backup

My computer died and I have the redemption code but it's already in use on the old computer. I need somehow change my CC to the new computer. Right now it's asking for a serial number but I am already a member...

I need to somehow transfer my CC over to a new computer. Right now it says the redemption code has already been activated and yes that is for the old computer. I bought a new one and I need it to be moved over to this one. How can I do this?

Creative Cloud Help / Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Creative Cloud Learn & Support
http://helpx.adobe.com/creative-cloud.html

I can't register for Games Centre on iPhone 4. It says that every nickname is already in use (even the most ridiculous and obscure ones) Does anyone have a suggestion to correct this?

I have been trying to register for Games Centre on my iPhone 4. I have tried so many Nicknames (even obscure and ridiculous ones), and it tells me that every single Nickname is aleady in use by another user. Does anyone else have this problem? Any suggestions on how to overcome this? It would help if the Games Centre had a "Contact Us" tab.

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

We upgraded to Mavericks on two computers at work, and now Favorites from one computer show, while Favorites from the other don't. The same AppleID was used for the upgrade on both computers, but we have separate logins.

At work, we upgraded to Mavericks on two iMacs, using the same AppleID. Now, in Safari, the Favorites bar shows only my coworker's faves on both computers, and my Bookmarks are in the bookmark listing, also showing on both computers. How can we fix this, so that I only see my Favorites and Bookmarks and she only sees hers?

I hope it's okay that I post about my progress with this!
I restarted both computers and tested our Safari connection by deleting a couple of bookmarks on my computer. They did NOT delete from the other computer, so that problem seems to be resolved. I'm not sure what will happen if she signs back into iCloud, but we'll cross that bridge when we come to it.
I hope this helps, if you have a similar problem.

HT1420 I have used up the amout of authorized computers for one account, however two of them have crashed. How can I deauthorize those two without having to deauthorize the other three?

I have completed my list of 5 computers authorized. I am trying to authorize another one but I need to get rid of two authorized computers which hard disks have crashed. How can I deauthorize those two without affecting the other three?

Individual computers can only be deauthorised directly on them, but if you've reached the 5 computer limit then you can log into your account and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.

Can you run the $9.99/mo version of Photoshop CC on multiple computers? If so, what's the maximum number of computers?

I need to know if I can run Photoshop on my laptop and a desktop, or if I could run it on my computer and my wife could also run it on her computer. Or would we have to have multiple subscriptions.

Hi Jdh2015,
With a single subscription, you can install Photoshop on 2 machines, provided you are not using them simultaneously.
Thank you for posting on Adobe Forums.

Error while starting the Wily : A socket port was already in use

Hello,
When I strat the Wily intro scope I am getting following error.
Kindly help me resolving this issue.
er3esu31:p43adm 4> nohup ./runem.nohup.sh &
[1] 20549
er3esu31:p43adm 5> Running Enterprise Manager with IHOME=.
Running Enterprise Manager with JAVAPATH=/usr/sap/ccms/wilyintroscope/jre
java version "1.5.0.03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0.03-_13_feb_2006_16_39)
Java HotSpot(TM) Server VM (build 1.5.0.03 jinteg:02.13.06-21:25 IA64, mixed mode)
log4j:ERROR Failed to flush writer,
java.io.InterruptedIOException:
        at java.io.FileOutputStream.writeBytes(Native Method)
        at java.io.FileOutputStream.write(FileOutputStream.java:260)
        at sun.nio.cs.StreamEncoder$CharsetSE.writeBytes(StreamEncoder.java:336)
        at sun.nio.cs.StreamEncoder$CharsetSE.implFlushBuffer(StreamEncoder.java:404)
        at sun.nio.cs.StreamEncoder$CharsetSE.implFlush(StreamEncoder.java:408)
        at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:152)
        at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:213)
        at com.wily.org.apache.log4j.helpers.QuietWriter.flush(Unknown Source)
        at com.wily.org.apache.log4j.WriterAppender.subAppend(Unknown Source)
        at com.wily.org.apache.log4j.RollingFileAppender.subAppend(Unknown Source)
        at com.wily.org.apache.log4j.WriterAppender.append(Unknown Source)
        at com.wily.org.apache.log4j.AppenderSkeleton.doAppend(Unknown Source)
        at com.wily.org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(Unknown Source)
        at com.wily.org.apache.log4j.Category.callAppenders(Unknown Source)
        at com.wily.org.apache.log4j.Category.forcedLog(Unknown Source)
        at com.wily.org.apache.log4j.Category.log(Unknown Source)
        at com.wily.util.feedback.backend.log4j.Log4JBackend.log(Log4JBackend.java:139)
        at com.wily.util.feedback.ADefaultModuleFeedbackChannel.doLog(ADefaultModuleFeedbackChannel.java:545)
        at com.wily.util.feedback.ADefaultModuleFeedbackChannel.logbottleneck(ADefaultModuleFeedbackChannel.java:524)
        at com.wily.util.feedback.ADefaultModuleFeedbackChannel.log(ADefaultModuleFeedbackChannel.java:479)
        at com.wily.util.feedback.ADefaultModuleFeedbackChannel.error(ADefaultModuleFeedbackChannel.java:313)
        at com.wily.util.event.ListenerTracker.sendEventToOneListener(ListenerTracker.java:148)
        at com.wily.util.event.EventPump.immediateDeliverEventIfListenerNotDead(EventPump.java:152)
        at com.wily.util.event.EventPump.immediateDeliverBroadcastEventAsync(EventPump.java:123)
        at com.wily.util.event.EventPump.access$300(EventPump.java:23)
        at com.wily.util.event.EventPump$Posting.deliver(EventPump.java:512)
        at com.wily.util.event.EventPump$EventPumpThread.run(EventPump.java:760)
Introscope Enterprise Manager failed to start because:
A socket port was already in use (see the log for the port number)
Press 'Enter' to acknowledge....
[1] +Stopped (tty input) ./runem.nohup.sh
Thanks & Regards
Girish

Hi
Check whether introscope is already running. if it is then kill that process manually and start willy again.
You use the following command to check whether any other program is using the same port
netstat -an | grep -i listen | grep 80

Already in use by the maximum of 2 computers.

Similar Messages

Maybe you are looking for