Alright I tried asking this in the "recording" fo
I tried asking this in the recording section, but my cries went unanswered. I hope someone in this section has a clue. I recently purchased a X-Fi platinum (which I am planning to return soon if I can't get this resolved). I have been trying to record with the card first with the digital SPDIF in, then the Analog (aux 2), then the Analog in on the card itself, then on the SPDIF in the card. No matter what I try I cannot get the recording to go above -2db peak using any kind of source. Is this where the max record is supposed to hit's? It seems to be a bit weak. Every other sound card I have owned can easily get to 0db with minimal effort, especially with analog ins. Am I missing something, or is this card supposed to only go to -2db for recording? I made a recording and opened it in soundforge, and there was barely a wave form. Is my card defecti've maybe, or is it a design limitation??BTW, I did RTFMI did try maxing just about every windows mixer config I can think of. I did look through every tool (software) and config I could find that installed with this card, and I am just confounded.
SB Audigy Advanced MB with Sigmatel STA9220 audio chipset
Input Monitor is half way between and is greyed out, trying to connect a Line In device an audio mixer and trying to record audio but the audio recording is at constant level and am unable to reduce the volume level using the Input mixer?
How do I enable the Input mixer.
Similar Messages
-
Trying to retrieve all the records from the file on desktop
HI All
I have one particular problem. I was given a text file which as 7000 records with length 512 each in a continues string. I Changed begining of each record with comma in that text and saved it in .csv , when I try to upload the file into my program's internal table.
It is still giving one record. I used
itab_EXTRACT1 declared as
DATA: begin of itab_extract OCCURS 0,
extract1(512) type c,
end of itab_extract.
call method cl_gui_frontend_services => gui_upload
exporting
filename = Xfile
filetype = 'ASC'
has_field_separator = 'X'
changing
data_tab = itab_EXTRACT1
exceptions
others = 17.
Is there a way how to retrieve all the records into the internal table.
Thanks
RaviHi Ravi,
I don't know if this is the correct solution, but I think it will work.
Declare your internal table (itab_extract) with the maximum length which your file will occupy.
Create another internal table (itab) with field (text) length 512.
Populate the internal table itab_extract using GUI_UPLOAD.
Then write this code
l_index = 1.
itab-text = itab_extract-extract1+0(512).
append itab.
do.
n = ( l_index * 512 ) + 1.
itab-text = itab_extract-extract1+n(512).
append itab.
if ( itab-text is initial ).
exit.
endif.
enddo.
Let me know if I miss anything. -
Decode Function I asked this in the wrong section so I hope Im right now!
select
a11.SEQ_MEMB_ID,
a11.Auth_Number,
a11.Admit_Primary_Date,
a11.Reviewer,
Decode (a11.Reviewer,
CLC, '2',
HBR, '3',
RAB, '4')
a11.admit_primary_date
from windsoradm.auth_master a11;
I am trying to get if the Reviewer is CLC then they are code 2 HBR Code 3 etc and it does not work. I take out the decode function and the query works. I am getting ORA-00923 FROM KEYWORD NOT FOUND WHERE EXPECTED.Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Simplify the problem as much as possible. Remove all tables and columns that play no role in this problem.
Always say which version of Oracle you're using.
This is the right forum for this question. Mark your question in the other forum {message:id=10266930} as "Answered", so people won't waste their time.
925518 wrote:
select
a11.SEQ_MEMB_ID,
a11.Auth_Number,
a11.Admit_Primary_Date,
a11.Reviewer,
Decode (a11.Reviewer,
CLC, '2',
HBR, '3',
RAB, '4')
a11.admit_primary_date
from windsoradm.auth_master a11;
I am trying to get if the Reviewer is CLC then they are code 2 HBR Code 3 etc and it does not work. I take out the decode function and the query works. I am getting ORA-00923 FROM KEYWORD NOT FOUND WHERE EXPECTED.That's the correct DECODE syntax, where CLC, HBR and RAB are columns, and you want to return a string (not a number) such as '2'.
If 'CLC', 'HBR' and 'RAB' are literal values, then enclose them in single-quotes. If you want to return a number, don't put it in quotes. (Anyhting inside single-quotes is a string literal.)
Perhaps you meant something like:
, DECODE ( a11.Reviewer
, 'CLC' , 1
, 'HBR' , 2
, 'RAB' , 3
) AS reviewer_codeThere's an error right after the DECODE. You can't use a11.admit_primary_date as a column alias. (This is probably what's causing the ORA-00923 error.) Either a11_admit_primary_date (with an underscore instead of a dot) or admit_primary_date would be okay. If a11.admit_priomary_date is the next column in the SELECT clause, put a comma befor it.
You need a FROM clause. -
I asked this in the airport community, but I think it might belong here
I recently went Wireless with airport express(Sat 4/14). It is working fine with my iPad2, but for some reason, I don't understand it seems like my iMac loses the network and I have to go find it again. choose it, set the security and give it my password. Fortunately I have the ridiculously long password in keychain so I can paste and copy easily on the mac. I have it set to remember the network. This has happened twice today and once yesterday there must be a way to fix it. Seems to happen after I use the iPad but I would think that is coincidental, not the cause. And when it last happened it told me there was no connection, but the airport router was steady green and the modem it is attached to (Comcast) had all its lights steady. And my iPad found the network also, but it took several attempts to rejoin the mac, so I thought the problem is probably with something in the mac. The network is not hidden , because I tried that and then I can't connect at all to the mac or iPad. So I decided to repost my question here. Thank you.
Hi mason mason,
how long is your iMovie project, because encoding process can take hours before it is done and sometime even it is shows the bar process already fully blue, but the process might still go on for a couple more minutes.
Did you get any error message during encoding process, if not, try to be more patient and let it flow by itself (at least for another hour).
Good Luck
ps: did you check the updater yet? -
Basically, clicking my bookmark tab or the star as NO affect, and I cannot bookmark. I am about ready to just ditch firefox all together. Can someone help? I want to keep it, cuz it's the fastest, but I want my normal funcitons to work, or it's pointless.
There 5 ways to save a new Bookmark in Firefox: <br />
1. {Ctrl + D} <br />
2. Right-click and select Bookmark this Page. <br />
3. Bookmarks > Bookmark this Page <br />
4. Double-click the Star that is on the right side of the Location bar. <br />
4a. (A single-click on the Star will save the new Bookmark to the Unsorted Bookmarks folder.) <br />
5. Letf-click and drag the website image ''(Favicon)'' in the URL bar (or on the active tab) into the Sidebar view of Bookmarks {Ctrl + B} <br />
or to the Bookmarks menu bar item ''(the drop-down will open)'' and then onto the drop-down listing of your bookmarks and folder of bookmarks ''(folders will open)''<br />
or onto the Bookmarks Toolbar - the new bookmark will be saved when you release the left mouse button -
Application view loading all the records on view
Hello,
We have a customization navigating from JTT pages to opening a OA Frame work page, occassionally user reporting the target "OA Framework page" hungs, and poor response from application. We noticed in EBS -> Poolmonitor VO is trying to load all the records from the table, unable to reproduce this scenario.
Why application loosing request parameters?
Any help is appreciated, thanks in advance.
Pullarao.Hello,
We have a customization navigating from JTT pages to opening a OA Frame work page, occassionally user reporting the target "OA Framework page" hungs, and poor response from application. We noticed in EBS -> Poolmonitor VO is trying to load all the records from the table, unable to reproduce this scenario.
Why application loosing request parameters?
Any help is appreciated, thanks in advance.
Pullarao. -
Query to retrieve the records which have more than one assignment_id
Hello,
I am trying to write a query to retrieve all the records from the table per_all_assignments_f which has more than one different assignment_id for each person_id. Below is the query i have written but this retrieves the records even if a person_id has duplicate assignment_id's but i need records which have more than one assignement_id with no duplicates for each person_id
select assignment_id ,person_id, assignment_id
From per_all_assignments_f
having count(assignment_id) >1
group by person_id, assignment_id
Thank You.
PKMaybe something like this?
select *
From per_all_assignments_f f1
where exists (select 1
from per_all_assignments_f f2
where f2.person_id = f1.person_id
and f2.assignment_id != f1.assignment_id
);Edited by: SomeoneElse on May 7, 2010 2:23 PM
(you can add a DISTINCT to the outer query if you need to) -
Calendar forms10g: doesn't display, 'cause items are required in the record
in the record I have items with the required property set to yes.
I Display the Calendar on Key-ListVal and When-Mouse-DoubleClick triggers.
when the triggers are fired, oracle shows me the following error FRM 40202 Field must be entered. and I can't enter the date.
That's why the record loses the focus when the calendar shows up.
how I can keep my items with the required property set to yes, without having the frm 40202 error.
SteveInstead of using a different block for the calendar, you could create a separate fmb and use CALL_FORM and a GLOBAL to show the calendar and intercat with it. This way, the record will not loose focus and you won't get the error.
-
Filtering the records of a table
Dear Experts,
I am trying to filter out the records of an output table from an RFC based on the values in one of the columns using the 'Filter' operator.The filter field is a numeric field.However the Filter input offers only four options by default i.e <b>Equal to 10</b> , <b>Greater than 10</b> , <b>between 10 and 20</b> , <b>less than 10</b>.My requirement is that i want a filter of type, say <b>less than 0</b> ,<b> greater than 0</b>,<b>less than some xxxx</b> , <b>greater than xxxx</b>. How can i accomplish that in VC?
Thanks,
Karambir Singh.See the Visual Composer FAQ:
https://wiki.sdn.sap.com/wiki/display/VC/Filtering+data -
Reg : Find the records in Table control
Dear all
Im having one requirement in table control . In my table control totally 100 records contains sales documents
for Example
100010
100020
100030
In that Records how to find particluar sale document in table control. How to build find option in table control.
If possible or not
Thanks & regards
SriHi Sridhar,
You need to implement amodal screen for this and a Find button above the table control.
or you can use POPUP_GET_VALUES FM
after you enter a value in the POP up screen.
" You need to put some effort to implement this, wish you to implement it successfully as this is possible
READ TABLE ITAB WITH KEY VBELN = FIND_VBELN. " FIND_VBELN is the field on your find screen.
if sy-subrc = 0.
tc-top_line = sy-tabix. " this makes the record visible in the First position
endif.
PROCESS AFTER INPUT.
LOOP AT itab.
MODULE find.
ENDLOOP.
In Program
MODULE find INPUT.
DATA : tab TYPE STANDARD TABLE OF sval WITH HEADER LINE.
REFRESH tab.
CASE ok_code.
WHEN 'FIND'.
clear ok_code.
tab-tabname = 'VBAK'.
tab-fieldname = 'VBELN'.
APPEND tab.
CALL FUNCTION 'POPUP_GET_VALUES'
EXPORTING
* NO_VALUE_CHECK = ' '
popup_title = 'Find Sales Order'
start_column = '5'
start_row = '5'
* IMPORTING
* RETURNCODE =
TABLES
fields = tab
EXCEPTIONS
error_in_fields = 1
OTHERS = 2
IF sy-subrc = 0.
READ TABLE itab WITH KEY vbeln = tab-value.
IF sy-subrc = 0.
tc-top_line = sy-tabix.
ENDIF.
ENDIF.
ENDCASE.
ENDMODULE. " find INPUT
Cheerz
Ram -
Help! I am trying to decide between the Macbook Air and Pro.
If I got an air I would get the largest screen/processor combo but with the Pro as the price is a bit more I would go with the smaller. Which would you recommend?
You should also ask this in the MacBook Pro and MacBook Air forums. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/notebooks/macbook_air -
My daughter created a movie using iMovie 11, which she has worked on for a month. When trying to save it on a jump drive she was asked to "finalize" the movie, and while this was running (quoted 13 hours!) she received an error message. Now there is no record of it at all, I have looked in trash etc. Any ideas how I could try and retrieve the file?
The file cannot be reloaded in iMovie using File > Open Recent ??
There is no trace of the file in a Spotlight search?
The project files are not under <user>/Movies/iMovie Projects ??
Finalizing creates small, medium and large version of the finished video. It does take a long time, but it should not destroy your project files.
Oh, and you really MUST have a backup of your files. You can expect to lose files if you have no other copies of them. -
I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos? I do nto care about anythign else.
Here are the steps I though I took this morning:
Backup iPad
Connect to iTunes and downlaod newest version of iTunes and then newest iOS
restart Vista Laptop
upgrade to newest iOS
I knew somethign was wrong when it took about 6 hours to upgrade the iPad
at the end it errored with this message error (-50), but the upgrade worked
I was expecting to see all my photos but didn't see them
I have tried a restore to a back up 2 times. The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
I tried it again 2 hours ago and same message.
They are very valuable to me and so now I am panicking
Your help is much appreciatedHi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario -
I'm trying to open an iTunes account and was asked to provide one of each:credit card details or gift card details.i provided a gift card details and yet I'm being asked to contact the support team!!! Pls can someone help me out on this as I cant enjoy my new iPad 3 without buying apps
Brenda, the easiest way to contact the support team is thru the iTunes Customer Service website:
http://www.apple.com/support/itunes/contact/ -
Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens
Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini
Maybe you are looking for
-
For example, if I go to [http://www.ncbi.nlm.nih.gov/pubmed/20435580 an abstract on PubMed] and click on either of the full text icons, Firefox will open a new tab. I want the full text to replace the tab with the abstract, instead. The best thing I
-
Download and upload smartforms in 4.6C
Hi, Is there any way to download and upload smartforms in 4.6C?
-
99% CPU on Front Row with Snow Leopard, possible workaround...
This might be helpful for some who have experienced this issue as well. It seems that Front Row will continue to work in the background when you exit from it using Apple - Q, but if you exit using the remote, holding down the Menu button for a couple
-
No audio in Quicktime or Frontrow. Video plays fine in VLC.
Hi, I have some xvid videos. They play fine in VLC. They don'y play audio in Frontrow or Quicktime. Stream 1 mpga audio codec. I can't find a solution to this. Also have some video off a sony recorder which again will play in VLC but isn't recognised
-
Twice as expensive in Australia!!!!!!!!
Right, Photoshop CS5 would cost me $699 if I lived in the US. But as it happens, I live in Australia. Now, at the moment, 669 dollars in the US is worth about 707.987 dollars in Australia. That's the current rate of exchange, it's what the banks use,