Alright, why do audio instruments not exist?

Ok guys...iMac Intel, 1.8ghz duo...so we open logic express 7.2.3, and hey guess what, no audio instruments. So i go to CREATE MULTIPLE, and i get "can not add anymore tracks"
NEVER seent his before. Furthermore the mixer window lacks everything except the MIDI nstruments, which is a bug thats been driving my crazy on my rig for sometime now.
Can anyone help me out here?
Thanks in advance

Ok guys...iMac Intel, 1.8ghz duo...so we open logic
express 7.2.3, and hey guess what, no audio
instruments. So i go to CREATE MULTIPLE, and i get
"can not add anymore tracks"
Go to your Environment window (under "windows" menu)
Adn tehn go to the audio layer.Look at what audio objects you have there.Do you have audio tracks,audio instruments,busses,auxes and outputs,plus a master?
Here is where you can create new audio instruments,if there are none.
Manual,Chapter 5 "The Environment" page 201 to see how to create a new audio object.
Manual,Chapter 6 "Logic's Mixing Facilities" page 295,for a description of each type of audio object.
NEVER seent his before. Furthermore the mixer window
lacks everything except the MIDI nstruments, which is
a bug thats been driving my crazy on my rig for
sometime now.
Can anyone help me out here?
Thanks in advance
In the mixer window,at the left,you will see a list of blue or grey buttons,labelled:
Global
MIDI
Input
Track
Inst
Aux
Bus
Output
These buttons simply are for viewing that type of object in the mixer window.If it's grey,you do not see that type of ojject in the mixer window.
Manual,Chapter 6,"Logic's Mixing Facilities" page 307, "Display Modes"
So,there you are,one big spoon for a big job...most everyone gets offended if I say RTFM.
Cheers

Similar Messages

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud.

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud due to older running system on my macbook pro.

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

HT201272 Why are audio books not under purchased for download?

Why are audio books not under purchased for download?

cblampson wrote:
I know that. The question is why, when every other media that is sold on iTunes is there.
Becasue the audiobook distributors do not allow Apple do offer this.

Why function SAP_CONVERT_TO_XLS_FORMAT does NOT exist on BI 7.0?

We are trying to find a function in ABAP program to download SAP table data to an excel file. We have tried the following two function on our BI 7.0 system:
1. function: GUI_DOWNLOAD
Exist, but when run it with following code, get the error msg "Wrong value of the parameter FILETYPE"
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
         filename = 'C:test\test.xls'
         filetype = 'XLS'
     TABLES
        data_tab = itab.
2. function SAP_CONVERT_TO_XLS_FORMAT:
Does NOT exist in our BI 7.0 system. Could we create a new function on our BI system by referring to a R3 system if this function exist on our R3 system?
Thanks!

Hello,
you could just check the OSS-Note 722513, which combinations specially in the SAPGUI - Versions support Excel 2007. Think normally it's the 7.10 version.
Regards Wolfgang

Why are audio & visual not in synch on QuickTime Pro?

Hi!
I just downloaded QuickTime Pro and when I made a "new movie recording" my voice is not in synch with my lips—there's a lag.
Why is that? Is it my processing speed? Memory issues? Preference settings I need to tweak? Or, am I just talking to quickly!?
Help!
Roma
Roma

Hi Roma!
am I just talking to quickly!?
Could be!
This refers to iMovie, but it may also help you:
iMovie: Improving audio and video synchronization
http://support.apple.com/kb/TA25603?viewlocale=en_US

Why are audio units not showing up?

I'm just about out of my mind with this one- I've downloaded a number of plugins, namely DCAM synth squad, Flux Stereo Tool and Magnus Ambience Reverb, but no matter what I do I can't get them to show up. They claim they're 64 bit so that shouldn't be a problem, and I can't get them to show up in either Logic X or Ableton Live 9. I've re-scanned all plug-ins in both DAWs, I've deleted my plugin cache and had them rescan that way, but nothing works. I can see the .component files in my library, but nothing I do will get either Logic or Live to recognize them. I can open synth squad in standalone mode so the plugins themselves are working, they just won't show up as inserts.
The Ambience reverb is even recognized by the audio units manager and it says its validated and an effect, but it doesn't show up when I look at the available plug-ins on my channel strips.
Any help would be much appreciated.

Flux Stereo Tool is only available as a 32bit AU version so that won't work in LPX (or Live9 in 64bit mode)
Note: 64bit floating point is not the same as 64bit AU Plugin..........
Magnus Ambience Reverb is available as a 64bit AU Plugin but only if you download that specific version.... (However, several people have reported it doesn't work for them in 64bit mode in any DAW anyhow, even with the correct version)
Mac OS X Magnus Ambience Reverb Universal 32-bit and 64-bit AU
..and according to the FXpansions website DCAM free version is only available as a 32bit AU plugin so that wont work with Logic Pro X (or Live 9 in 64bit mode)
In summary:
In order for a plugin to work in Logic Pro X it must be a 64bit AU (AudioUnit) plugin.... not a 64bit VST.. or a 32bit AU Plugin...

Why "Warranty" Tab does not exist when picking

Dear friends,
Below is my issue
When picking against a SO, After assignment the batch number , go to header "Extras" >serial numbers> Assign Serial number Then double click check box of "Eqpt"..there is no Warranty tab exist..Where did I miss?
Your avice will be deeply appreciated.
Thanks,
Linda

Hi,
You need to configure View profile and you have need to assign to equipment category.
Define
IMG >> Plant maintenance and Customer service >> master data in PM & CS >> Technical objects >> General data >> set view profiles for technical object
Screen group - Screen group for equipment data
Profile - standard
Select row and double click on ACTIVITY & LAYOUT OF VIEW
Add screen number 110 - Warranty in existing tab
or you can define new tab as warranty and assign 110 screen
Assign
IMG >> Plant maintenance and Customer service >> master data in PM & CS >> Technical objects >> Equipment >> equipment categories >> Maintain equipment categories.
Here you can assign that profile to you equipment category.
kapil

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

Why is Audio Lock in iMovie4 not effective?

In iMovie4, I have locked audio tracks to video clips. These video clips were imported as photos, but I understand that iMovie4 considers them video clips. Well & good.
The locking is a farce. If I increase the duration of a video clip in the Timeline, the clip expands accordingly, but the audio clip, supposedly locked to it, doesn't go with it. So, I have to waste hours going back thru my slideshow, realigning my audio clips with the video clips. Am I missing something, here?

Guess I don't know what you mean by Direct Trimming,
as it doesn't appear as a command under any of the
menu headings, either in black, or grayed out. Do you
mean moving the handle at the end of an audio clip
inward to trim the clip, as I did? I can't understand
why the time for the clip that appears above the
timeline didn't register the decrease in the clip's
duration after I had shortened the clip. Maybe I
didn't actually shorten the clip, as far as iMovie4
was concerned.
Yes, Direct Trimming is what you describe, where you grab the end of a clip and drag it. I suggest trying again. Here the displayed duration of the clip DOES change.
Note that this workaround requires dragging a VIDEO clip that precedes the locked audio clip, not an audio clip. When I do it here, the audio clips after it return to their proper locked position.
There's another issue I neglected to mention: When I
play either a segment or the total program, the
playhead proceeds jerkily (Is that a word?), and the
audio is garbled. However, when I burned a DVD of the
program and ran it on my TV, it was perfect, except
for some changes I noted & which I'm trying to make.
It looks like the only way I can know the end result
of my efforts is to burn DVD's, rather than playing
the program on iMovie4.
That sounds a lot like the "stutter" problem described here:
http://discussions.apple.com/thread.jspa?messageID=2597033#2597033
It usually occurs because an iMovie project has lots of audio clips. "Too many" varies from project to project. The problem can also be caused by one imported iTunes song.
Workarounds for both causes are described in that thread. It also describes how to test for the problem.
Note that although the topic was written for iMovie 5/6, the problem exists in older versions of iMovie too.
I must also note that a major problem is that once I
play a segment of my program that I've changed to
see the effect, iMovie 4 keeps going after I've
clicked the play button or the space bar to stop it.
The only way I've been able to stop it is to exit
iMovie4 and select Save before closing.
Because of the stuttering, iMovie may be unable to "see" your mouse click. It's too busy trying to play the project. Fixing the stutter should fix that too. The stutter causes many user interface problems. Essentially nothing works as it should. The stutter may also be causing difficulties with Direct Trimming.
When you eliminate the stutter using one of the workarounds everything should return to normal.
Karl

Error on start: Path does not exist: /Library/Audio/Apple Loops Index

I get the error "Path does not exist: /Library/Audio/Apple Loops Index
Without this directory you can not use the LoopBrowser. Please make sure this directory exists" when starting Garage Band. I also cannot use the onscreen keyboard, or musical typing in GarageBand. All other sounds work fine.
The only thing that changed since I last used GB was that I installed Leopard. (and that was a while ago, so I thought all was well and got rid of my last Tiger backup. )
Any suggestions?
Thanks!

Another update: I tried to reinstall garage band from the disks that came with my mac, but got the error:
"Install Failed
Unable to Install
The Installer could not install the software because there was no software found to install."
The following errors appeared in Console:
4/7/08 4/7/08 9:50:08 PM kernel SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x11, ASCQ = 0x00
4/7/08 4/7/08 9:50:09 PM kernel SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x11, ASCQ = 0x00
4/7/08 4/7/08 9:50:09 PM kernel disk2s3: I/O error.
4/7/08 4/7/08 9:50:10 PM Installer[519] -[IFPkg(InfoConversionPrivate) _parseOldStyleForLanguage:] - can't find .info file (GarageBand)
4/7/08 4/7/08 9:50:10 PM Installer[519] The package "GarageBand" could not be opened. This can happen if the package has incorrect permissions or if the package has been renamed.
4/7/08 4/7/08 9:50:10 PM Installer[519] PFPackage::packageWithURL - can't instantiate package: /Volumes/Mac OS X Install Disc 2/Packages/GarageBand.mpkg/Contents/Installers/GarageBand.pkg
Any ideas?
Thanks!

"File does not exist: /etc/apache2/htdocs/ABC/script" why?

Hey all,
on Linux error.log I go:
"File does not exist: /etc/apache2/htdocs/ABC/script" when I try to use the browser connecting to system. Why?
Any help is fine.
Thanks a lot in advance and best regards
Michael

get it myself
ip adress in wgate config has to be changed to default

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Why Table or View does not exist???

Hi to all. I have an issue with my Business Objects. I have a relationship between two entities with the following cardinality:
EntityA 1......* Entity B, the relation is a composition and the IDs for them are DB Sequence.
I have created the corresponding views and the view link and they all work fine in the Application Module. Also, in the View Object for the EntityA ( ViewObjectA ), I have created a View Criteria, a nested one, with two attributes: the first one is an att from the*ViewObjectA* and use a value from a bind variable (Integer), and the second one is an attribute from the Entity B son and it's value is static (1). I tested with the query button and says OK. When I run the AppModule for test the ViewCriteria, I got this error: ORA-00942: table or view does not exist . And for my sorprise, I checked the query resultant and it's wrong!! Please see an example below:
SELECT Att1,Att2 FROM EntityA WHERE ( ( ( (EntityA.att1 = :id ) AND (EXISTS(SELECT 1 FROM EntityBNQ1 EntityBNQ1 WHERE ( (*EntityBDNQ1.att1 = :id*) ) AND ( EntityA.att1 = EntityBDNQ1.att1 ))) ) ) ) AND (EntityA.att1 = EntityBDNQ1.Att1))) ) ) )
As can be seen, the name of the tabla for the EntityB has NQ1 attached, and I don't know why. The view link works perfectly, as also the create operation for both ViewsObjects.
Please can anyone tell me what I'm doing wrong, if I have a mistake? What should I do??
Thanks in advance.
PS: In a new application, I created a Business Components from DataBase, and it works my WiewCriteria. I just can't believe that I should start all over again.
Thanks in advance again.

Hi and thanks for the answers. Apologize for my forgetfulness of the version. It's 11.1.1.5.0 and ADF Business Components 11.1.1.60.13
I created a new Application and I made a Business Components From Table with only the two Entities mentioned before. Once configured (Put the ID as a DBSequence), created the views an the View Criteria and it's just all fine.
Hear is fragment of the XML from my EntityA (the god one). The first part it's the key attribute, the second one its the key.
This is the god working version
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="Person"
Version="11.1.1.61.92"
DBObjectType="table"
DBObjectName="EntityA"
AliasName="Person"
BindingStyle="OracleName"
UseGlueCode="false">
<DesignTime>
    <Attr Name="_codeGenFlag2" Value="Access"/>
    <AttrArray Name="_publishEvents"/>
</DesignTime>
<Attribute
    Name="EntityId"
    ColumnName="EntityA_ID"
    SQLType="NUMERIC"
    Type="oracle.jbo.domain.DBSequence"
    ColumnType="NUMBER"
    TableName="EntityA"
    PrimaryKey="true"
    IsUpdateable="while_insert"
    Domain="oracle.jbo.domain.DBSequence" //Different
    RetrievedOnInsert="true">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="39"/> //Different, but don't think it's important
      <Attr Name="_SequenceStart" Value="1"/>
      <Attr Name="_SequenceName" Value="EntitiA_SEQ"/>
    </DesignTime>
</Attribute>
...This is the bad working version
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="EntityA"
Version="11.1.1.60.13"
DBObjectType="table"
DBObjectName="EntityA"
AliasName="EntityA"
BindingStyle="OracleName"
UseGlueCode="false"
RowClass="criminal.model.entities.filiative.EntityAImpl">
<DesignTime>
    <AttrArray Name="_publishEvents"/>
    <Attr Name="_codeGenFlag2" Value="Access"/>
    <Attr Name="_isCodegen" Value="true"/>
</DesignTime>
<Attribute
    Name="Entity_ID"
    IsUpdateable="while_insert"
    DefaultValue="@0"    //Different
    ColumnName="EntityA_ID"
    SQLType="NUMERIC"
    Type="oracle.jbo.domain.DBSequence"
    ColumnType="NUMBER"
    TableName="EntityA"
    PrimaryKey="true"
    RetrievedOnInsert="true">
    <DesignTime>
      <Attr Name="_SequenceStart" Value="1"/>
      <Attr Name="_SequenceName" Value="EntityA_SEQ"/>
    </DesignTime>
</Attribute>
... Hear is the constrain (the god one) related to the key att:
<Key
    Name="EntityAEntityAIdCheck10">
    <DesignTime>
      <Attr Name="_DBObjectName" Value="EntityA_EntitAy_ID_CHECK_10"/>
      <Attr Name="_checkCondition" Value='"EntityA_ID" IS NOT NULL'/>
      <Attr Name="_isCheck" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes"/>
</Key>
...Hear is the constrain (the bad one) related to the key att:
<Key
    Name="EntityAEntityAIdCheck10">
    <DesignTime>
      <Attr Name="_isNotNull" Value="true"/>
      <Attr Name="_DBObjectName" Value="EntityA_EntityA_ID_CHECK_10"/>
      <Attr Name="_checkCondition" Value='"EntityA_ID" IS NOT NULL'/>
      <Attr Name="_isCheck" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="model.EntityA.EntityA_ID"/>
    </AttrArray>
</Key>
...Hear is the XML of the EntityB The differences are the same that in EntityA
the key att:
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="EntityB"
Version="11.1.1.61.92"
DBObjectType="table"
DBObjectName="EntityB"
AliasName="EntityB"
BindingStyle="OracleName"
UseGlueCode="false">
<DesignTime>
    <Attr Name="_codeGenFlag2" Value="Access"/>
    <AttrArray Name="_publishEvents"/>
</DesignTime>
<Attribute
    Name="EntityBId"
    ColumnName="EntityB_ID"
    SQLType="NUMERIC"
    Type="oracle.jbo.domain.DBSequence"
    ColumnType="NUMBER"
    TableName="EntityB"
    PrimaryKey="true"
    IsUpdateable="while_insert"
    Domain="oracle.jbo.domain.DBSequence"
    RetrievedOnInsert="true">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="39"/>
      <Attr Name="_SequenceStart" Value="1"/>
      <Attr Name="_SequenceName" Value="EntityB_SEQ"/>
    </DesignTime>
</Attribute>
...this is the bad one
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="EntityB"
Version="11.1.1.60.13"
DBObjectType="table"
DBObjectName="EntityB"
AliasName="EntityB"
BindingStyle="OracleName"
UseGlueCode="false"
RowClass="model.EntityBImpl">
<DesignTime>
    <Attr Name="_codeGenFlag2" Value="Access"/>
    <AttrArray Name="_publishEvents"/>
    <Attr Name="_isCodegen" Value="true"/>
</DesignTime>
<Attribute
    Name="EntityB_ID"
    IsUpdateable="while_insert"
    ColumnName="EntityB_ID"
    SQLType="NUMERIC"
    Type="oracle.jbo.domain.DBSequence"
    ColumnType="NUMBER"
    TableName="EntityB"
    PrimaryKey="true"
    RetrievedOnInsert="true">
    <DesignTime>
      <Attr Name="_SequenceStart" Value="1"/>
      <Attr Name="_SequenceName" Value="EntityB_SEQ"/>
    </DesignTime>
</Attribute>
...the key (the god one)
<Key
    Name="FkEntityB">
    <DesignTime>
      <Attr Name="_isCascadeDelete" Value="true"/>
      <Attr Name="_referencedKey" Value="EntityA_PRIMARY_KEY_10"/>
      <Attr Name="_isForeign" Value="true"/>
      <Attr Name="_DBObjectName" Value="FK_EntityB"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="project1.EntityB.EntityBEntityBId"/>
    </AttrArray>
</Key>
...the bad one
<Key
    Name="FkEntityB">
    <DesignTime>
      <Attr Name="_isCascadeDelete" Value="true"/>
      <Attr Name="_referencedKey" Value="EntityA_PRIMARY_KEY_10"/>
      <Attr Name="_isForeign" Value="true"/>
      <Attr Name="_DBObjectName" Value="FK_EntityB"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="project1.EntityB.EntityBEntityBId"/>
    </AttrArray>
</Key>
...Sorry if is too long.
What might be wrong? It's that enough to determine the error?
Thanks again.
PS: I did try look for NQ1 as kdario said and nothing was found. I had already done regenerate the association as 969750 said and still habe the same error.

Why is there the error "The requested protocol does not exist comm:0" ?

Hi all,
I want to read data from a USB serial port of the mobile phone ( Alcatel OT-806D ). The cable connects the phone and the computer. The system running in the PC is Windows XP. I launch a java j2se program which writes a number to the usb serial port. And in my midlet I run a j2me which will read on the usb port. The problem is that the output displayed in the item on my midlet is "The requested protocol does not exist comm:0". So why there is this error , and how to correct it ?
Thank you very much

only protocol required to be suppoted by a j2me mobile device is http://: some vendors to implement more protcols like socket:// but this depends on the vendor...

Why the audio of my video in my itunes is not playing when i fullscreen it? :( HElp me please..

why the audio of my video in my itunes is not playing when i fullscreen it? HElp me please..

Hi eversonjm,
Thanks for using Apple Support Communities. If you are out of authorizations but only have 1 computer, deauthorizing all computers and reauthorizing your correct computer might be a good idea. See this article for instructions:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
If after deauthorizing and reauthorizing your computer, you are still not authorized for the 96 songs, this article has some steps for seeing the account name that was used to purchase a song, in the event that a different account may have been used:
Recovering a forgotten iTunes Store account name
http://support.apple.com/kb/ht1920
Cheers,
- Ari

Alright, why do audio instruments not exist?

Similar Messages

Maybe you are looking for