ALSA installed but not found.

I'm a new user. Recently I've done an upgrade and had to install OSS for a game and my ALSA driver seems to be completely gone.
# /etc/rc.d/alsa start
:: Restoring ALSA Levels [BUSY] /usr/sbin/alsactl: load_state:1569: Cannot open /etc/asound.state for reading: No such file or directory
[DONE]
so I tried aslactl store to restore the file:
# alsactl store
alsactl: save_state:1502: No soundcards found..
No go...
# ls -l /dev/dsp
lrwxrwxrwx 1 root root 26 2009-10-12 13:30 /dev/dsp -> /dev/oss/oss_hdaudio0/pcm0
# aplay -l
aplay: device_list:223: no soundcards found...
# alsamixer
cannot open mixer: No such file or directory
However, alsa-lib, alsa-utils, alsa-oss, alsa-plugins. I even tried to install a bunch of alsa-related stuff from AUR as well. I don't know why its not being found. I'm really hating how OSS can only manage 1 sound source.
pacman -S alsa-lib alsa-oss alsa-plugins
warning: alsa-lib-1.0.21.a-1 is up to date -- reinstalling
warning: alsa-oss-1.0.17-1 is up to date -- reinstalling
warning: alsa-plugins-1.0.21-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (3): alsa-lib-1.0.21.a-1 alsa-oss-1.0.17-1 alsa-plugins-1.0.21-1
Total Download Size: 0.00 MB
Total Installed Size: 2.67 MB
Proceed with installation? [Y/n] y
checking package integrity...
(3/3) checking for file conflicts [#####################] 100%
(1/3) upgrading alsa-lib [#####################] 100%
(2/3) upgrading alsa-oss [#####################] 100%
(3/3) upgrading alsa-plugins [#####################] 100%
Install jack-audio-connection-kit, libsamplerate, ffmpeg
or pulseaudio to get their respective plugins working
Also, it shows up in lspci along with many other things
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. P5B
Flags: fast devsel, IRQ 22
Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Anyone have any suggestions?
Thanks
edit: added more info
Last edited by BowlSmoker (2009-10-12 18:14:56)

I am having the exact same problem, I have no idea how to fix it or what it going wrong. Any help would be appreciated.
There is only one difference with my problem
ls -l /dev/dsp
ls: cannot access /dev/dsp: No such file or directory
/dev/dsp does not have a soft link

Similar Messages

Installed but not found on computer

I've successfully installed the latest 10.1 for my 64-bit laptop with Windows 7. A check by Adobe confirms that it was properly installed, and that I have the correct version for my computer.
AND YET, there is no icon for it anywhere, it doesn't come up on my list of Programs, when I enter "Adobe Flash Player" in the search bar it shows no such program, and when I try to play a FLV file, it won't give me Flash Player as an option. So..... I have it on my computer, but I apparently am not allowed to see it or access it?
I've uninstalled and re-installed several times, and cannot for the life of me figure out what the problem is. Any help for this maddening situation?

Hi,
Yes, I read his comments and I made sure Shockwave Flash Object was enabled in IE as he suggested. I am trying to make a flip book. One of the posts here in the forum said to make a SWF file, which I did. But now I can't figure out how to do anything with it. I thought Flash Reader was the right program to look at it, but maybe I'm wrong? Maybe I need Flash itself? The flip book thing has me pretty frustrated and confused. All the sites and software I've tried are poor quality. I was hoping I could figure out how to do it through Adobe to get better quality.
1. Oct 17, 2010 1:30 PM in response to: jonstrebler
Re: Installed but not found on computer
Hi, Flash Player is a browser plugin, not a stand alone Player. You should have Shockwave Flash Object in add ons in IE and make sure it is enabled.
Your Flash files are in C:\Windows\SysWOW64\Macromed\Flash
You may want the Adobe Media Player:http://www.adobe.com/products/mediaplayer/
Hope that helps,
eidnolb

Adobe Reader XI installed but "Not Found"

I have Adobe Reader XI installed and apparently running normally. Unfortunately the UK's Parcelforce web-site says it can't find it.
I get the message " Adobe Acrobat NOT found. You must have Adobe Reader (5 or better) with the browser plugin properly working"
Can anyone help me please? How can I tell if "the browser plugin is properly working" ?

In IE11 use Tools | Manage Add-ons, then show All Add-ons. Do you see the Adobe PDF Reader add-on, and is it enabled?

New software instruments installed but not found to use

Help please
I have downloaded 3 new AMG expansion, synth and power packs in garageband 08' running on a g5 with leopard os and though they appear on the HD where they should (HD/library/garageband/instrument library/sampler/sampler instrument) they are not found once inside garageband-new software track instruments.
Why is this happening and how can newly installed software instruments appear for use inside a track?
Thanks!

Not being sure exactly what you have tried, or what failure message(s) you have received, here's a general iPad troubleshooter.
iPad Support

Query installed but not found in RSRT

Hello Experts
We are facing issue with BI COntent Queries , which are active successfully from RSA1->BI Content.
However when trying to execute from RSRT, these queries are not identified in RSRT.
Queries are
0SD_C11_Q0003
0FIGL_M40_Q0003
0FIGL_M30_Q0006
Have anybody encountered such issue, what can be the possible cause for this.
Regards,
Kanchan

We have data for reports however report is not visible in query designer too..to be executed from there..
The issue is we can see query active when we install it from BI content but cannot find it in F4 in report execution input screen for technical name of query..
Edited by: Kanchan Angalwar on Aug 3, 2010 6:13 AM

Oracle Clinical install problem on SUN. Says install.sh not found - java runtime erro

install.sh not working - need help
Hi all,
OS Solaris 8. Sun Sparc 20 - 256 MB 9.1 GB
I have installed Oracle 8.1.6 Rel 2 on the SUN Sparc. Everything is fine and a customised DB has been created. Now I
have to install an Oracle application on the same server. I have a working knowledge of Unix but I don't know scripting.
I logged in as OPAPPS as required. (.chsrc). I have set the path with all possible directories and made it a member of
group DBA as requested.
I put the CD in the CDROM and then cd /cdrom
# install.sh
BUT I get this message: install.sh not found.
install.sh is there on the CD. This is the contents of install.sh from the CD
#!/bin/sh
os=`uname | tr A-A a-z`
case "$os" in
sunos) platform=solaris
hp-ux) platform=hp-ux
osf1) platform=decunix
esac
#The environment variable $SRCHOME cannot be set during installation
unset SRCHOME
unset SHLIB_PATH
CMDDIR=`dirname $0`
if [ "CMDDIR" = "." ]; then
CMDDIR=`pwd`;
fi
# Replace relatove path with fully qualified path
if [ ! "`echo $CMDDIR|grep '^/'`" ]; then
CMDDIR=`pwd`/$CMDDIR;
fi
if [ x${PATH} != x ] ; then
PATH=$PATH:/usr/bin: /bin
export PATH
else
PATH=/usr/bin:/bin
fi
cd $CMDDIR/$platform/Disk1/install/$platform
./runinstaller $*
directory structure on CD
-r-xr-xr-x 1 root sys 638 Aug 23 2000 install.sh
dr-xr-xr-x solaris
dr-xr-xr-x hpunix
dr-xr-xr-x decunix
dr-xr-xr-x nls732
solaris/disk1/install/solaris and the file
-r-xr-xr-x runinsta.
-r-xr-xr-x oraparm.ini
dr-xr-xr-x images
d .
d ..
Would anybody know why I get install.sh NOT found when it is there?.
Thanks for your help.

Hi,
I am installing Oracle clinical 4.5.x.
I need to know whether both the Database server and application server for Oracle Clinical can be installed on same server(windows 2000 server).
Both of them are installed on windows platform.
It seems that u have tried the single node installation.
So,please give all the possible details regarding the single node installation for oracle clinical no matter what platform it is.
Please reply me as soon as possible, its urgent.
Thanking u in advance.

Airport Express green, but not found in Itunes10 - Bonjour problem?

my AX is connected to my network (join a network) and connected to speakers to use as remote speakers on iTunes (airtunes). Connection works great, status is green. I have 2 windows pc's on the network: XP and Vista.
As long as iTunes was shipped with Bonjour 1.0 this was no problem.
From iTunes version 8, when Bonjour 2.0 was introduced, the Airport was not visible anymore in iTunes, and also not in Airport Utility. Strange fact however: the AX seems to work fine (green light) and I can view the configuration in Airport Utility via 'Configure Other...' and entering the ip address on my local network. all options are set correctly for Airtunes.
I believe this is a bonjour related problem, as until now, the fix was to uninstall Bonjour 2.0 and install an old version (1.0.6)
iTunes10 however does not seem to work with Bonjour1.0
So I'm at a loss: my AX is not visible in iTunes, not in XP, not in Vista.
Other things I tried:
* disable firewall completely: no luck
* reset airport express and reconfigured (all GREEN light and visible via configure other, but not found in a scan of Airport Utility when using bonjour2.0
* open port 5353 TCP/UDP in my router (D-Link DI-524) for the AX: no luck
Anyone having the same issue?
config: AX(n) FW7.4.2 in join a networkmode WPA2-DHCP, Dlink DI-524, WinXP, WinVista, iTunes 10, Airport Utility 5.5.1Win, Bonjour2.0.2

I have exactly the same problem. Extremely annoying. Before, I could fix it by re-installing Bonjour after each iTunes-upgrade. But after version 10, that doesn't work any more. Or rather, I can see the AX in Airport Utilities, but it doesn't show up in iTunes. (Weird thing is, it works fine on my other computer, both run Windows Vista).
I guess one answer would be to roll back to an earlier version of iTunes?
Is Apple aware of this issue? It must be a bug in Bonjour. It's been around a long time now. Please fix it!
Message was edited by: Tomas Härenstam

Looked for but Not found

I have looked for but not found. So that means that more than likely I have just not looked in the right place.
What I am trying to find is the total number of contacts the the 8530 will hold. IE; 500? 1000?
I know that each contact will take so many numbers and so many email address's but how many individual contacts will it allow you to add?
STRIKE HOLD!
Land of the Free Because of the Brave!
Solved!
Go to Solution.

Hi and welcome to the forums!
I have yet to see a credible source publish actual limits for records on any of the calendar, memo, tasks, or contacts apps. If you find one please post. I usually tell users to keep it manageable. To me 6,000 contacts? Seriously?
Heck I wasn't stationed with 6,000 people in the U.S Army! .
Remember the device memory is flash memory, designed for keeping all device functions running at peek levels. Storing large amounts of records just takes that much dynamic memory and makes it static.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Make: /usr/bin/install: Command not found

I'm working on a PKGBUILD, but I'm running into this:
make: /usr/bin/install: Command not found
make: *** [install] Error 127
==> ERROR: Build Failed.
Aborting...
What would cause this? Old code? Missing package?

It was actually really old code, after a bit of successful this-should-probably-work script editing! I created a package in the AUR called dasm, which is an assembler for the Atari 2600 among many other systems.
http://aur.archlinux.org/packages.php?ID=37200

[SOLVED] Error uninstalling eclipse: "post-install: command not found"

When I try uninstalling eclipse , I get "error: command failed to execute correctly"
w0ng@e8500 ~
% sudo pacman -Rns eclipse
checking dependencies...
Targets (8): glib-networking-2.30.2-1 gsettings-desktop-schemas-3.2.0-1 gstreamer0.10-0.10.36-1
gstreamer0.10-base-0.10.36-1 libproxy-0.4.7-1 libsoup-2.36.1-1 libwebkit-1.6.3-1
eclipse-3.7.2-2
Total Removed Size: 243.84 MiB
Do you want to remove these packages? [Y/n] y
(1/8) removing eclipse [######################################] 100%
/tmp/alpm_eY6rVO/.INSTALL: line 10: post-install: command not found
error: command failed to execute correctly
(2/8) removing libwebkit [######################################] 100%
(3/8) removing libsoup [######################################] 100%
(4/8) removing glib-networking [######################################] 100%
(5/8) removing libproxy [######################################] 100%
(6/8) removing gsettings-desktop-schemas [######################################] 100%
No schema files found: removed existing output file.
(7/8) removing gstreamer0.10-base [######################################] 100%
(8/8) removing gstreamer0.10 [######################################] 100%
w0ng@e8500 ~
But all files appear to be removed successfully.
w0ng@e8500 ~
% sudo updatedb && locate eclipse
/usr/share/highlight/themes/edit-eclipse.theme
/usr/share/icons/Faenza/apps/16/eclipse.png
/usr/share/icons/Faenza/apps/22/eclipse.png
/usr/share/icons/Faenza/apps/24/eclipse.png
/usr/share/icons/Faenza/apps/32/eclipse.png
/usr/share/icons/Faenza/apps/48/eclipse.png
/usr/share/icons/Faenza/apps/64/eclipse.png
/usr/share/icons/Faenza/apps/96/eclipse.png
/usr/share/icons/Faenza/apps/scalable/eclipse.svg
/var/abs/community/eclipse-cdt
/var/abs/community/eclipse-cdt/PKGBUILD
/var/abs/core/licenses/eclipse-1.0.txt
/var/abs/extra/eclipse
/var/abs/extra/eclipse-ecj
/var/abs/extra/eclipse/PKGBUILD
/var/abs/extra/eclipse/eclipse.desktop
/var/abs/extra/eclipse/eclipse.install
/var/abs/extra/eclipse/eclipse.sh
/var/abs/extra/eclipse/eclipse.svg
/var/abs/extra/eclipse-ecj/PKGBUILD
/var/abs/extra/eclipse-ecj/ecj
w0ng@e8500 ~
Should I be concerned or is everything fine? Can anyone reproduce this?
Last edited by w0ng (2012-03-28 19:00:30)

Check /var/abs/extra/eclipse/eclipse.install. Typo in post_remove: post-install should be post_install. You can run the post_install manually (and maybe report this in the bug tracker), but it just updates the gtk icon cache, so it's nothing to worry about.

Issue with ARD 3.0 not pushing out Installs, Says its installing but not

Issue with ARD 3.0 not pushing out Installs, Says its installing but not
Has anyone seen this. It seems to happen with ARD 3, have not seen this in ARD 2.
I go to the Install Packages on Target Computers, put in: 10.4.7 Combo (for the correct CPU, PPC or Intel), security updates, QT 7.1.2, etc.
Push it to Macs I can connect to, observe and control.
The progress bar copies the files (in some instances it does not) and then it just hangs there, bar does not move, Installs never finish, not good, very odd.

Is it the same clients that have the problem every time? Are those clients doing anything cpu intensive? Have you tried rebooting the affected clients?
Maybe try a smaller package on those clients.

How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI?

How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI? I'm having some hiccups getting Adobe to register the software, but since I set it as the default .pdf reader during setup, things try (and fail) to open in the as yet unregistered software. How can I change it temporariiy to the Acrobat Reader XI that I have installed?

Anubha,
It worked! Thank you so much.
I'd opened file with the 'Open with' feature then clicking Adobe Reader,
but that didn't do it. When I used 'Open with', then 'Choose default
program...', it worked like a charm.
Again, thank you!
Jonathan
On Wed, Mar 18, 2015 at 10:16 PM, Anubha Goel <[email protected]>

Blackberry Desktop Software installed, but not on start menu or icons on desktop

Blackberry Desktop Software installed, but not on start menu or icons on desktop
I got a new laptop Windows 7. I installed Blackberry Desktop apparently successfully. However, doesn't appear on start menu nor desktop.

Hey tgcraighead,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
After the installation did you restart the computer? If you go into Control Panel>Programs and Features do you see BlackBerry Desktop Software listed in the applications?
Did you have a previous version of BlackBerry Desktop Software installed?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not listed in applications. have downloaded install app but cannot carry out the installation. am informed flash player is blocked.

operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not in application. have downloaded install app but cannot carry out the installation. can anyone help? am unable to use any application requiring flash player.
thank you!

Hi Anne,
Your version of Safari is still supported. Please see Adobe Flash Player | Tech specs for supported OS and browsers.
If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari. This has nothing to do with whether or not Flash Player supports the browser.
I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it." Flash Player.plugin only works in the browser to view Flash content in the browser. The plugin does not open files outside of the browser. If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
Google Chrome does embed Flash Player in it, while Firefox does not. Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
Maria

Flash is installed ,but not seen by Chrome or Firefox

Here is what I checked in Chrome , I have:
Adobe Flash Player - Version: 15.0.0.189
Shockwave Flash 15.0 r0
This is installed but not being recognized by either firefox or chrome. I am on a WIN 8.1 pc and IE does not work so it is disabled/turned off. It does not even open anyway. How do I fix this?

Let me clarify, I need flash to work in Firefox and Chrome, IE is not important. I rarely use it

ALSA installed but not found.

Similar Messages

Maybe you are looking for