ALSA Mixer --how to set Capture

Hello. I am a newbie to Linux...using Ubuntu 12.04 for a couple of months. I have a SoundBlaster Live Platinum card with an Live drive that allows me to input sound through AUX2. The sound is coming out the speakers, but I cannot record from it as the CAPTURE source. Does anyone know how to change this. The F1 help does not discuss ALSA mixer, but addresses using Terminal (Gnome). I'm guessing there may be a magic keystroke combo to change the capture source to whatever device is currently selecting, but nothing has worked for me yet. Maybe it's a terminal command. Any help would be greatly appreciated.

Have you tried using F4 to change 'Capture' settings?
In the top left I have (3rd line from the top):
View: F3:[Playback] F4: Capture F5: All
When I press F4, it changes to
View: F3:[Playback] F4: Capture F5: All
Last edited by karol (2014-02-28 16:28:09)

Similar Messages

How to set captured audio stream to be inputstream of socket?

Hello everyone,
I am doing a project on Voice Chat Room. I am success to captured the live audio from a microphone and I would like to use socket to tranmit those live audio data. I have the basic knowledge of socket, but I don't know how to set those audio stream to be the inputstream of socket.
Can you tell me whether it is possible to do this? And can you give me some hints how to do this?
Cheers!!
Andrew

Hi there is code available at http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html for capturing and transmiting through RTP the is also a custom protocol impplementation that uses UDP sokets it could be of help.
Does anyone know how to enable computers behind routers video conference ??
please mail me at [email protected]
thanks
Xerxes

How to set capture time?

Am I missing something obvious, or is there indeed no way to set the capture time of a photo? Invoking
photo:setRawMetadata ("dateTimeOriginal", LrDate.currentTime ())
results in the error:
LrPhoto:setRawMetadata: unknown metadata key "dateTimeOriginal"
(The documentation doesn't list "dateTimeOriginal", but I tried it anyway.)
If true, this seems like a pretty big omission?

Chet - no way in LR that I know of at this point. You also can't set the model and make of the camera which all three would come in handy for scanned images from my epson scanner. I have not found a work-around other than creating an Task that iterates through the images you select and then calls an external program like Exiftool to set the date. For the new date to be effective you have to import the sidecar file (or the xmp data inside the DNG). This of course means you have to be sure to save the metadata (Ctrl-S) before running the routine to avoid overwriting develop and other metadata changes you have made.
Jeff

I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts. How do I capture all files in each account using newly purchased USB external hard drive?

I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts. How do I capture all files in each account using newly purchased USB external hard drive? Thanks!

Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

How to set up headphone mix logic pro x

Trying to figure out how to set up headphone mix in Logic Pro X but cannot get stereo sends.

Maybe this will help, in Logic Pro 9 there was a box under preferences/audio called universal track mode. If you unchecked this box then when settng a send or creating a aux track you had the ability to select mono or stereo busses. Logic Pro X doesn't seem to have this. So when creating a aux channel with output stereo 5-6 I can't select stereo thus I can't create sens to the left or right side of this aux channel for headphone mixes. In Logic Pro 9 I can create a stereo aux channel with bus 1-2 output 5-6 (to headphone amp) I can then use sends to send musical instrument to bus 1 (left side) and vocals to bus 2 (right side). I hope this helps I just want to know if this function is still in Logic Pro x or we have to go back to OLD SCHOOL way of doing this.
Thanks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Using AX as wireless router, how to set up w/ security and airtunes on XP

I previously had a Linksys wireless router. I just purchased an Airport express to use as the wireless router (and remove the Linksys router) as well as use the Airtunes functionality.
After some trial and error, I have been able to wireless connect my computer to the AX on it's own (the linksys router is now unplugged and out of the equation). I can connect to the internet fine on my PC (XP Pro SP2).
Trouble is, when I use the Network Setup Assistant, it shows the apple network listed, but it can't connect to it, no matter how many times I try, reboot my machine or reboot the AX. I've tried both the "setting up a new network" and "editing an existing network" option, and in each selection, after a few minutes of trying to connect to the network, I just get a failure message.
If I try and use the Admin utility, nothing shows up in the left-hand list window, and when I Press re-scan, still nothing shows (it doesn't even appear to scan).
I'm not sure what I'm doing wrong. I can't find simple instructions on how to set up the AX as the only wireless router for a PC and set up security and Airtunes (I'm assuming enabling airtunes is done in these applications, as I haven't seen anything about that yet either).
Any ideas on how this is done with a PC? Much thanks!
Dell 4500 series

I have found the 'DHCP Reservations' option on the AirPort Extreme to be buggy. I seem to remember it causing IP conflicts for some reason. I think what I remember is that if the computer with the reservation was off, and the DHCP server then handed out that IP to another DHCP client, then there would be a conflict when the reserved IP computer was turned back on. Maybe it was an issue in ealier versions of the AE or OS X as the case may be, and maybe it's been corrected, but I've never bothered using it agian since the method I describe below has always worked without fail. Also, I'm guessing DHCP Reservations would work fine if one manually enters IPs outside of the DHCP range but in the AE 'DHCP Reservation Setup Assistant' the IP options provided are within the DHCP range which to me makes no sense and increases the potential for IP conflicts.
Here's what I do to setup a mixed environment of static and dynamic IPs on my network. It works like a charm and does not require the DHCP server (beyond the distribution of dynamic IPs to hosts using DHCP).
For machines on my network that are accepting services from the public network, I set them up with static IPs using the 'Manually' option (System Preferences/Network/Ethernet/Configure IPv4). The settings for 'Router' IP address and 'DNS Server' IP address should both be set with your gateway/router LAN IP). Use an IP address below or above the DHCP range of adresses (in AE/Internet/DHCP/DHCP Beginning & Ending Address).
i.e. if my subnet is 10.0.1.1 and my DHCP range is 10.0.1.100 to 10.0.1.150, you could set the static IPs on your local hosts as 10.0.1.x where x = any number from 2 - 99 or from 151 - 200 as an example.
All other machines and devices that do not require static routing are setup as DHCP clients and get a dynamic IP from the AE. To me it's a simpler setup though it might take a little extra time to setup initially.
John

How to set up external hard drive and FCE 4

I am going to buy an external hard drive (firewire 400) and FCE4 but I am not sure how to set everything up.
Where should I load the software, capture to, and save projects?

FCE should always live on your system drive. Use the external as your Scratch Disk. You will select this in System Settings in FCE. I create a folder on the external for my projects and point FCE to it.
Keep your project files on your system drive as well as your autsave vault if you use that. You can put your other files, such as wavefrom caches on the external, though I leave them on my system drive.
Do not partition the drive. Format as OS Extended

How to set up Auto BCC?

How to set up Auto BCC?
Solved!
Go to Solution.

Hi @idssteve
BlackBerry 10 does not support Auto BCC.
Your feedback is important though so I will capture it for future consideration. Thanks

How can I capture in forms the text from a database error

In forms6i, how can I capture the text of an error during the execution of a dabatase procedure or package.
Thanks for your help.

You can use SQLERRM function :
SQL> create or replace procedure procerr
2 is
3     n number;
4 begin
5     n := 1/0;
6* end;
SQL> /
Procedure created.
SQL> set serveroutput on
SQL> declare
2     err1    varchar2(200);
3 begin
4     procerr;
5 exception
6     when others then
7             err1 := SQLERRM;
8             dbms_output.put_line(err1);
9* end;
SQL> /
ORA-01476: divisor is equal to zero
PL/SQL procedure successfully completed.
SQL>

SharePoint 2013 - Document Set Capture Version History. Does each version captured for each document set keep a copy of all the document stored in the document set?

Hi All,
We have currently encountered an issue where even though version control is turned on in a document library, changes made to the metadata of a document set is not tracked in a version history.
We have found that in order to this a user will need to manually click on the capture version history button.
With this in mind, we are concerned about the impact of this on our storage. The question we have been trying to answer is whether each document set version:
stores the change in metadata of the document set and a copy of all the documents stored in the document set
stores the change in metadata of the document set and a reference to the documents stored in the document set (making use of SharePoint 2013's shredded storage)
The reason we ask this is that if a document set version stores a copy of all the document stored in a document set, a change in one of the fields in the document set could result in the storage used to grow exponentially. e.g. if the document set contains
documents totaling 30MB, and if we have 10 versions of the document set, we could take up 300 MB in the content database for just one document set.
We have tried to some searching around Google but wasn't able to find any answers around this question. Would appreciate some assistance from anyone who has knowledge around how document set version history works.
Thanks in advance.
John

i had a long thing written out, but submit failed. suffice to say it does "2". it only stores the changes with pointers to the documents.
Christopher Webb | Microsoft Certified Master: SharePoint 2010 | Microsoft Certified Solutions Master: SharePoint Charter | Microsoft Certified Trainer| http://tealsk12.org Volunteer Teacher | http://christophermichaelwebb.com

How to set custom HTTP header for single sign on

Currently we just begin to use an application called "etran". This application requires user name and password to login. Now, my assignment is to integrate etran application in our internal application. This means that somewhere in our internal application, there is a link leads to the etran application.
It is going to be single sign on, that means that once user logs into our internal application, when he/she clicks on the etran link, no sign on to etran is needed.
I consult with the technical people in etran. they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?
Thanks in advance for your help.

sharon38_74 wrote:
they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?Your application need to act like a proxy. You can invoke a HTTP request programmatically using java.net.URLConnection. You can set request headers using URLConnection#setRequestProperty(). Also see the API docs: [http://java.sun.com/javase/6/docs/api/java/net/URLConnection.html]. You only need to know the header field name where to set the Base64-encoded value in. You need to Base64-encode the value yourself.

How to set the heap size of JVM

please let me know that how to set the heap size of JVM

C:\>java -X
    -Xmixed           mixed mode execution (default)
    -Xint             interpreted mode execution only
    -Xbootclasspath:<directories and zip/jar files separated by ;>
                      set search path for bootstrap classes and resources
    -Xbootclasspath/a:<directories and zip/jar files separated by ;>
                      append to end of bootstrap class path
    -Xbootclasspath/p:<directories and zip/jar files separated by ;>
                      prepend in front of bootstrap class path
    -Xnoclassgc       disable class garbage collection
    -Xincgc           enable incremental garbage collection
    -Xbatch           disable background compilation
    -Xms<size>        set initial Java heap size
    -Xmx<size>        set maximum Java heap size
    -Xss<size>        set java thread stack size
    -Xprof            output cpu profiling data
    -Xrunhprof[:help]|[:<option>=<value>, ...]
                      perform JVMPI heap, cpu, or monitor profiling
    -Xdebug           enable remote debugging
    -Xfuture          enable strictest checks, anticipating future default
    -Xrs              reduce use of OS signals by Java/VM (see documentation)look at the -Xm? lines
    -Xms<size>        set initial Java heap size
    -Xmx<size>        set maximum Java heap sizeThis can be used e.g. like this:java -Xms8M -Xmx32M MyProgwhich runs MyProg in a java VM with the initial heap size of 8 MB and a maximum heap size of 32 MB.
- Marcus

How to set the DFF Attribute Programmatically?

hi
how to set the DFF Attribute Programmatically in Process Request of CO
thanx

Hi
Do u want to set the value in DFF Programmatically ?
u can capture the VO used for DFF and set the the value in controller.
Thanks

How to set a HTML color to a control button

How to set a fixed color to a disabled button?
I have a boolean button which has 3 status: on, off and disabled. I don't like the 'grayed and disabled' option. I will use red for off, green for on, and white gray (foreground color) for the disabled status. The HTML color code is BDBDBD. I tried to send the hex number 'BDBDBD' to the button property node 'color[4]' but was told that I was wiring to the wrong type of terminal.
Could any one post a sample code of how to construct the structure of 'color[4]' using a RRGGBB number?
Thanks,
Ryan

What exectly do you want and do you see.
If I run the code you have in LabVIEW 9.0, I get the following result after running.
For convenience I have shown the second color array you set as color indicators:
Note that you use grey as the colors for True and False
Here I have set made the colors more distinct:
Ton
Message Edited by TCPlomp on 07-10-2009 08:00 AM
Message Edited by TCPlomp on 07-10-2009 08:01 AM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
ButtonColor_FP.png ‏17 KB
ButtonColorMoreColor_FP.png ‏18 KB

ALSA Mixer --how to set Capture

Similar Messages

Maybe you are looking for