ALSA: Problem with sound card detection

Hi all...
I have small problem with alsaconf..
alsaconf report:
"No supported PnP or PCI card found"
I have DELL Latitude C500 laptop
Sound card: ESS Maestro3 (This soundcard is supported by ALSA)
Archlinux detect my soundcard correctly:
00:08.0 Multimedia audio controller: Aurora Technologies, Inc. Unknown device 1998 (rev 10)
Subsystem: Dell Unknown device 00b1
Flags: medium devsel, IRQ 4
Memory at 30002000 (32-bit, non-prefetchable) [disabled] [size=256]
Memory at feffe000 (32-bit, non-prefetchable) [disabled] [size=8K]
Capabilities: <access denied>
modprobe snd-maestro3 doesn't work.
(Sorry for my bad english)
Any ideas ?

I had installed a new archlinux , and also have this Error.
[root@myhost eric]# alsamixer
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL default
alsamixer: function snd_ctl_open failed for default: No such file or directory
[root@myhost eric]# ls /dev/snd
controlC0 pcmC0D0c pcmC0D1c pcmC0D3c pcmC1D0c seq
controlC1 pcmC0D0p pcmC0D2c pcmC0D4p pcmC1D0p timer
[root@myhost eric]# lsmod |grep snd
snd_seq_oss 29312 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46672 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6924 2 snd_seq_oss,snd_seq
snd_pcm_oss 38560 0
snd_mixer_oss 14592 2 snd_pcm_oss
snd_intel8x0 28700 1
snd_intel8x0m 14092 0
snd_ac97_codec 95780 2 snd_intel8x0,snd_intel8x0m
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 69124 4 snd_pcm_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec
snd_timer 19204 2 snd_seq,snd_pcm
snd 44644 10 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6496 2 snd
snd_page_alloc 7816 3 snd_intel8x0,snd_intel8x0m,snd_pcm
[root@myhost eric]# /etc/rc.d/alsa restart
:: Saving ALSA Levels [BUSY] ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0
/usr/sbin/alsactl: get_controls:533: snd_ctl_open error: No such file or directory
[FAIL]
:: Restoring ALSA Levels [BUSY] ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0
/usr/sbin/alsactl: set_controls:1179: snd_ctl_open error: No such file or directory
[FAIL]

Similar Messages

I have a problem with sound card

Hi,
I Have MSI 865PE Neo2-S Motherboard.
I have downloaded the new Sound Card Driver, and I have problems with gaming in 5.1ch
In Unreal Tournament 2004 my computer resets when it is set to 3D Sound + EAX
In the old version of the sound card Driver the Unreal Tournament 2004 was working good, but in the old version I have problems with the SPDIF out
In the new version the SPDIF working very good but I have problems with gaming
How can I fix that?

Hi,
have you tried unistalling the sound drivers and then re-installing? Its a shame I don't have Unreal Tournament 2004 as i have the same motherboard as you and I could try it. Why do you need to set your in-game sound to 3D Sound + EAX? 3D sound I always thought its didnt sound very good.
Try the unreal Tournament forums and look for sound problems. Maybe that might help http://www.ina-community.com/forums/forumdisplay.php?forumid=249
Good Luck!

915P Neo2, problem with sound card...

I formatted my hd, and installed the WinXP OS again,
WinXP can't detect the sound card, also Sound card's software can't detect the card.
I checked the BIOS settings and the audio onboard in ENABLED mode.
Before the reinstall the sound worked.
What can be the problem ???
Thanks,
eli.

Quote from: elimalka on 28-April-06, 14:47:02
I formatted my hd, and installed the WinXP OS again,
WinXP can't detect the sound card, also Sound card's software can't detect the card.
I checked the BIOS settings and the audio onboard in ENABLED mode.
Before the reinstall the sound worked.
What can be the problem ???
Thanks,
eli.
(in this Forum
Go in Mainboards-> Intel P4 & Celeron P4 based boards, see in Stickies, subjects look at "Cmedia CMI9660 Azalia driver problem solution" -started by voodooghost-.
I hope solve your problem.

[845 Series] mb msi 848p neo-v problems with sound card

Since I've bought my new MB, I'm experiancing some problems with my sound card. WinAmp and MusicMatch Jukebox ( any version) does not support 5.1 sound system, but playing in stereo system. The soundcard AC97 is OK, cause Winows Media Player is working properly.Does anyone had such problem and solved it?
I must say that I've already used MSI MB, and all APPs worked properly with the same sound card. The difference is that my ex MB was based on old Intel processors, but not Presscot based as this one.

Have you installed the latest driver to
the Realtec soundchip(ALC 655)?

Have you problems with sound card when playing Netflix movies on MacBook Pro ?

We have been having difficulty playing movies recently and we called Netflix last night. Accrding to their error code, we should re-install sound cards they said. Does this sound familiar to anyone? I'm not sure what to do to remedy this issue? thank you!!

I'm so ****** off that it's been weeks and no solution has been provided for this. In the middle of video editing, watching quicktime videos, youtube, or playing any games the computer hard freezes with a black screen and looping audio of about 1/2 second.
FIX IT!

Useing WindowsXP problem with sound card

Hi there,
When I lisening music, there is this like small delaying (crackling) sound and when I whatching video is same problem, video and sound to delaying, it's like variable processor work. Is that normal? Maybe problem is that I'm using Windows XP SP2 (32bit), my procesor is Intel Core Duo (64bit)?

Do you mean CSM(Compatibility Support Module) mode when you mean Legacy mode?
Do you want to try this https://www.cloudtec.ch/blog/tech/st...stall-dvd.html it changes your Windows 8 boot to Legacy boot.

AGP Graphics card covers pci slot 2 & Problems with sound card

I have already posted this on another part of the forum.
Hi i have an M Audio Delta192 Audiophile soundcard which is not working fully
i have been on the phone to the M Audio technical support about this
my problem is apparently i need to put the pci Soundcard card into the first slot after my graphics card which would be slot no 2
my graphics card has a fan on top which covers pci slot no 2 so the next available slot is slot 3 which is where i have my soundcard now
a lot of the functions available are greyed out in the M Audio Delta control panel this is the software used to control the parameters of the soundcard
is this right do i have to install my Soundcard in slot no 2 for it to work correctly
if so is there any way around this
my graphics card is a ATI Radeon 9800 XT
if there is no way around this are there any agp cards that i can get that dont have a great big fan on top that covers pci slot 2 that are good quality & can run 2 monitors
i cant seem to find any

Hi J D Knight
I'm Pretty sure it is this is what it has under my system profiler
ATI Radeon 9800 XT:
Chipset Model: ATY,R360
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x4e48
Revision ID: 0x0000
ROM Revision: 113-A14404-123
this was the graphics card installed when i bought the powermac
i understand the reasons for the fan as i am led to believe it is a powerfull card
but my main use is for audio is it true about the pci slots do i need to have my soundcard in slot 2 as M-Audio have told me if so then i do need to change my graphics card so i can get my soundcard working as it should
the only thing i need is my dual screens

[SOLVED]Problem with sound in HDMI

Hello good society of Arch
Now I have problems with sound from HDMI. I use Arch as an tvPc, wasting movies and tv shows on it. I use ALSA and it works well, except of a few files that I have, then there is picture but sound is either twisted or not played at all. It does not matter whether I use vlc or mplayer, I'm experiencing the same problem.
I have not found anything about this with google, other problems have been either hdmi sound working or not, not like it is with me, sometimes it works and sometimes it don't.
I know that the files are ok, I can play them in anther pc I have (also using Arch on that pc).
Does anybody know what the problem might be? What do I have to look at to find out what the problem is? This have been like this for some time now, but I haven't looked into it before, because I don't use TV that muts, but the wife does and when she stats blaming Arch, I have too do something about it.
I have never encountered problem with Arch that i cant solve by using this forum and google
Thanks
Last edited by Vaski (2010-08-21 01:08:42)

cleanrock wrote:I noticed i got no audio over hdmi on some video file which had a low audio bitrate, i solved it by resampling the sound to 48000 in ~/.mplayer/config :
af=resample=48000
I will look at this when i come home from work, thanks.
nTia89 wrote:have you already read our wiki ?
Yes i have, and sound is working, well most of the time.

Problem with sound in games requiring quicktime

I recently purchased CSI 1. I installed the game and the latest version of quicktime player. As soon as the game starts and the first character starts talking the game pauses as if loading and then plays for a second and pauses again for a few seconds. This intermittent sound problem makes it impossible to play the game as the freezing stops everything from functioning. I tried another game that requires quicktime to be installed and that game is pausing the same. Has anyone else had this problem? I have all the latest drivers installed for Vista. Any help would be much appreciated.

Do you get any problems with sound in other (older) games? You didn't mention which drivers in particular you updated, but make sure the graphics card's ones are included.
With regards to Half Life 2, check out this page on the Steam site:
http://steampowered.custhelp.com/cgi...wYWdlPTE*&p_li=
If that page doesn't open correctly for you, just go to http://www.steampowered.com , then Support, and select Half Life 2 in the product list. It should be one of the first cases listed.
Cat

Problem with sound in games

Hi all welcome as you can see I'm new to your forum. So I have a problem as it concerns the sound in games.
Namely, I bought a Creative Headset HS-800 Fatality everything good in listening to music, etc.
But when I go to the game, I turned the sound (someone shoots to the left I hear him right, and vice versa.)
Yes, in all games but mostly it is felt such a battlefiel or call of duty.
At first I thought that this is the fault of my sound card but it's not because I was in a mate and in him was the same ... This recently replaced the computer and the same thing.
I came across the net to reverse the channels, but unfortunately I do not know how to set it up.
Here, the data on my computer:
Sound Card Speakers (Realtek High Definitie
Sound Card Realtek Digital Output (Realtek
Sound Card Realtek Digital Output (RCA) (Re
Operating system: Windows 7 64 bit
I would add that in tests Realtek win7 and everything is fine.
Regards and please help as soon as possible.

Do you get any problems with sound in other (older) games? You didn't mention which drivers in particular you updated, but make sure the graphics card's ones are included.
With regards to Half Life 2, check out this page on the Steam site:
http://steampowered.custhelp.com/cgi...wYWdlPTE*&p_li=
If that page doesn't open correctly for you, just go to http://www.steampowered.com , then Support, and select Half Life 2 in the product list. It should be one of the first cases listed.
Cat

Problem with sound after update

Hello
After update to 11.3 I have no bass sound in subwoofer in Firefox browser (youtube). I uninstall the newest version and install previous (11.2) and bass plays ok.
My os: Windows 7 x64. Sound card Creative X-fi.

Hello!
My problem is summed up in this topic.
Updated Flash Player with 11.3 this morning (june 12th 2012) and since then my 7.1 Sound System works only 2.1. If i enable EAX Effects, works on 7.1 but since it`s just a room it sounds very odd.
I have no problem with sound on HTML 5 websites for that matter, Winamp, Video Players, games.
Uninstalled Flash Player, sounds work ok without it on different browsers, other than Chrome (since it has FP built in).
I hope for a sollution soon.
Thank you.
*edit*
Untill there is a permanent solution, i found a way to deal with my issue and i hope it will help others.
I personally use Chrome and this is for this browser:
1. Type "about:plugins" w/o the quotation in the navigation bar.
2. On the upper right u will see "Details" click it then find the word "flash", and you will see something like this:
Flash (3 files) - Version: 11,3,300,257
Shockwave Flash 11.3 r300
Name: Shockwave Flash
Description: Shockwave Flash 11.3 r300
Version: 11,3,300,257
3. I say again, this worked for me on Chrome. The 3 files i have, two of them are Version 11,3,300,257 and one is 11.2.31.144
4. Simply disable the lates version 11.3 and enable the previous version 11.2
I hope this helps.
Message was edited by: AndrewPAM

My phone is iphone 4 (GSM)-american type with IOS5.11 , i have problem with sim card failer (korek type)

my phone is iphone 4 (GSM)-american type with IOS5.011 , i have problem with sim card failer (korek type)

Sounds like your iPhone is locked to AT&T. Contact them to see
if you qualify for unlocking.
This link may provide some assistance:
unlocking AT&T iPhones (thanks to wjosten for the link)
http://www.att.com/esupport/article.jsp?sid=KB414532#fbid=Ont7guWFCdY

Audigy 2 UNDETECTED BY creative cd-rom software, NO SOUND CARD DETECTED IN YOUR

Hello,
My card just did the same thing 'NO Sound Card DETECTION with AUDIGY 2 and Win XP SP2' and I found the solution by mere chance.
In fact I have purchased an Audigy 2 card two years ago and didn't like the plastic outputs. So I purchased an Audigy 2?ZX a month later thinking that I would return the first one and I forgot to. I changed my motherboard yesterday?having purchased a new clockable one.
I?overclocked the motherboard by a small 0% before installing all the pci's I have, just to try. In fact, I left it overclocked and installed all the?PCI's after. The Audigy 2 ZX was not recognised by the installation?CD. I could install manually all the softwares on the CD except 2. THX and another thing. I found that there was no equalizer and I hated the idea.
I worked on this and google for hours today. After dinner, I remembered I had another Audigy 2 in the cupboard. So I took it out, removed all Creative software on the PC through ADD/Remove. then uninstalled all the creative stuff in Control panel/system/hardware/device manager. then uninstalled the driver through the file CTZAPXX.EXE on the cd-rom.
I then shut off the PC , removed overclocking, replaced the cards and after boot, the CD-rom software recognized the card at once.
So I presume that the card has a chip, were it is recognised with. (EPROM) and this gets erased.
after all was working, I switched back the cards, and all was excellent.
so if you can get hold of another card for a couple of minutes, install the second card and all will go well. After, you just have to replace the cards. Beware not to keep your PC overclocked. I thing its the extra voltage to the PCI's that erases the eprom.
phew, I hope this hel
ps.
02-26-06 / Paris, France

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Problems with sound only on video not audio files

Hello
My first post here. I am having some problems with sound on video files. It is almost no sound, and the sound that is there is only crackling noise. I have the Creative X-treme audio soundcard and have installed the Vista codec pack and the K-lite codec pack. I have also updated the soundcard driver. The thing is that these problems only occure on video files, not on audio files such as mp3's. Can anyone help me?

About alsa dmix, and for the record:
On an Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, the following are my finding about
quality/cpu when mixing two streams at 44khz:
a snippet from my .asoundrc
#converter "samplerate_best" # perfect: 16%cpu, maybe overkill
#converter "samplerate_medium" # almost perfect: 6%cpu
#converter "samplerate" # good: 4%cpu, definitely usable
#converter "samplerate_linear" # bad: 2%cpu, way better than default wine resampler
#converter "samplerate_order" # very bad: 2%cpu, like the default wine resampler
Here is the reference topic: https://bbs.archlinux.org/viewtopic.php?pid=942724
I may be wrong, but in an opensource world (code reusing), i really doubt pulseaudio could lead to better quality/cpuuse tradeoff.
Pulseaudio, being just another layer atop of alsa, could only lead to higher cpu usage.
Last edited by kokoko3k (2013-11-11 15:33:41)

Problem with sound on iPod Photo

I am having a problem with sound on an iPod Photo. You can hear music for about 5 seconds and then it is silent. I have to turn off the iPod for several seconds. When I turn it back on it will have sound again for about 5 seconds before going silent again. Has anyone else expeirenced this? Any ideas what may be happening

Try these steps one at a time.
The Five Rs.
If nothing helps, you can arrange online service here. This may be more than just a software problem.
Service request.

ALSA: Problem with sound card detection

Similar Messages

Maybe you are looking for