Alsa/pulseaudio - keep the same master volume for speaker&headphones

Hello,
I have laptop Asus N550JV.
I installed alsa ant pulseaudio (alsa-utils and pulseaudio, nothing else, no pulseaudio-alsa plugin, because I noticed that it causes me more problems rather than reduces them.
the problem is that I want to keep Master audio channel untouched. If I listen through speaker, I could set master volume to 50%, then I can plug in headphones, set volume to 100%, then I can unplug headphones, the sound will play still at 100% THROUGH SPEAKER for about 0.5 sec. and after 0.5sec it will set back to 50% as I set when I was listening through speakers.
My question is, how can I fix this problem. I see that there are 2 ways to fix this:
1. make a lag time (delay) to switch from headphones to speakers.
2. keep the same master audio volume for both headphones and speakers.
Any ideas? I think the second solution would be easier to make, but I dunno how

Hi,
I am having the same problem with the ringer volume automatically being reset to some other volume. In my case the ringer volume slider under "Settings" + "Sounds" seems to be tied to the iPod speaker volume.
For example, I go in to "Settings" + "Sounds" and I set the ringer volume to maximum, I return to the home screen and then back to settings to make sure the volume is still the same (and it is), and then I go to iPod and play a track via the built-in speakers (i.e., no headphones). If I happen to change the iPod speaker volume and then stop playback and return to "Settings" + "Sounds" from the home screen I find that the ringer volume has been reset to whatever volume level I had previously set the iPod speaker volume.
I had assumed that these two volume settings were independent . Certainly, changing the ringer volume does NOT affect the iPod speaker volume, but setting the iPod speaker volume DOES affect the ringer volume.
Hopefully this is corrected in the first firmware update.
I have an iPhone 3G.

Similar Messages

  • Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it.  Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions  and my sight is dropping !   Thx

    Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it.  Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions  and my sight is dropping !   Thx

    Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it.  Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions  and my sight is dropping !   Thx

  • My daughter shares my apple id for her ipod touch, i just got an ipad and now I'm getting her messaging and face time calls to my ipad.  Can i change her messaging and face time email but still keep the same apple id

    My daughter shares my apple id on her ipod touch.  i recently got an i pad and now i'm getting all of her instant messages and face time calls.  Is there a way to change her contact information for those two areas so i don't get them on my i pad  but keep the same apple id for purchases?  Thank you

    See:
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

  • We had one family apple id. I want to keep all devices on the same apple id for itunes but separate ones for everything else.  How do I change the others now.  We have 3 iphones and an ipad.

    We had one family apple id.  I want to keep all devices on the same apple id for itunes but separate for everything else on the cloud. How can I change the other apple ids now? We have 3 iphones and an ipad.

    Hi, thank you for this post.  I hope you might be able to help me too? 
    I am relatively new to apple (have an iPad) and having been a PC user for years I was pleasantly surprised with the apple experience and am now trying to work out the best set up for me, my husband and young son as I am buying them both of them apple products this Christmas.  New Mac laptop/ ipad for hubby and then an ipod touch for my son oh and a new mac laptop for me. We are also thinking of moving from Blackberries to iPhones. Yes we seem to be hooked! but i am unsure about the home family set up and how to replace my PC network that I run off an 8TB server.
    In reading the forums I keep seeing people talk about problems they have with two apple IDs and trying to merge them. I have also heard about a family ID allowing us to share apps legally.  I am really nervous of setting us up wrong and then having problems later and hence i am now looking for some advice on how to share as much as we can legally but also make usage practical and not invading each others privacy. thoughts so far:
    Music - I think we are happy to share the same music and access using one ID (we currently don't buy much music from apple but have lots of CDs we share).
    Photos - It would be nice to share photos - as long as my son or husband cannot accidentally delete photos of mine (which is my biggest concern). I currently load all camera photos onto my 8TB storage box as the network owner and my husband has full access to copy any photo to his laptop but can never delete the original copies by accident.
    Apps - If possible i would like us to share these but they are cheap enough these days to separate if really needed. Would be good to share licence for pages etc though
    cloud, contacts, facetime, email -  this is what is making me consider separate IDs or learning how to have multiple users in one apple ID - I do not want to have to share synced contacts with my husband. I have near 300 contacts now through work etc and he will not want them plus i will not want his or him being able to delete mine by mistake. and then for email and facetime, well I want to give him his privacy so I do not receive his messages etc. especially now that we are considering switching to iPhones
    Then last but not least, i don't know the best solution for my son. he is only 7 years old so even though I don't want to pay for things again I don't want him being able to download "just any" app from the purchased icon in Appstore. Also, is there a child friendly setting to prevent him from viewing inappropriate content on the internet?
    Appreciate I have asked a lot of questions here but I am looking for any genuine advice out there. Thank you or other potential advisers in advance.

  • My wife and I got Iphone 4S same day 2 years ago. I used the same Apple ID for both. We do not use iCloud, but today after I updated my phone to IOS7 I keep getting her texts on my phone ans vice versa.

    My wife and I got Iphone 4S same day 2 years ago. I used the same Apple ID for both. We do not use iCloud, but today after I updated my phone to IOS7 I keep getting her texts on my phone ans vice versa. I turned off imessage in message settings. Seems to have stopped now? Never did this before IOS7. Will I have more troubble when her phone updates to IOS7? Is icloud going to be forced on me then?

    This is being caused by using the same Apple ID for iMessage on both phones.  To separate your messages, go to Settings>Messages>Send & Receive and do one of the following:
    Either uncheck the email address shown under "You can be reached by iMessage at" on both phones; or
    If you want to continue to receive iMessages at this email address, on one of the two phones, tap the Apple ID at the top, sign out, then sign back in using a different Apple ID.

  • Is it possible for automator to convert all word documents in my dropbox folder to apple's "pages" on iCloud and keep the same folder organization?

    Is it possible for automator to convert all word documents in my dropbox folder to apple's "pages" on iCloud and keep the same folder organization?  I am a teacher and want to switch from using microsoft office on my macbook pro to using pages/number/keynote.  I am hoping to get an iPad next year and go "paperless" with lesson plans and gradebooks and I heard that pages/numbers/keynote are great on the ipad.  I'd like to write an automator script (workflow?) to convert all my documents in dropbox to pages and have them stored on iCloud, then be able to access the files on my macbook pro and ipad.  Thanks!

    Create an AppleID under different email addresses for each family member at http://appleid.apple.com
    If they don't already have their own email address just setup a free one with Gmail, Yahoo, Hotmail or whoever you prefer.
    Then on each device sign into iMessage with the users own AppleID in:
    Settings > Messages > Send & Receive > Tap AppleID at top > Sign Out, then sign back in again with the correct AppleID.

  • I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?

    I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?

    Have you tried reinstalling the original drive? Same symptoms with it?

  • How to use the same credit card for more than one customer master

    Hi,
    this is a question for consultants at least a little familiar with SAP business partner, Customer-vendor-intergration cvi, contract accounting:
    My customer wants to store the same credit card with more than one customer. Arguments are that family members or partners may mutually agree to use the same credit card for their distinct purchases.
    I never tried with amazon or the likes but I know that SAP validates the uniqueness of credit cards.
    I found 6 code line where the message (V/)005 "Payment card &1 &2 is already assigned to customer &3" prohibits duplicate assignment.
    Even if I create a couple of enhancements to suppress the error, I don't know how the system will work.
    The customer does not like the idea of using alternative payer.
    Did you ever face the same problem and how did you solve it?
    Much Thanks in advance
    Best regards
    Clemens

    thanks

  • I just want iCal to keep the same time for appointments no matter what timezone I'm in

    I just want iCal to keep the same time no matter what timezone I'm in. Whenever I change timezones, all my appt times change too... please help!

    Make sure you set the time zone you want from the drop down menu in the upper right corner?

  • Bypass master volume for constant white noise play (KDE)

    Is there a way to play sound while ignoring the master volume control, even bypassing mute?
    I have tinnitus (ringing in the ears) and I get relief of these symptoms by playing white noise 24/7, I currently am using http://playnoise.com/ but there are many different sources of white noise, it could even be an mp3. I like it to be playing at the same volume, all the time, no exceptions. But, when I turn the volume up and down via my media keys or system tray, for a song playing in Amarok or a video playing in YouTube the white noise is also turned up and down, this is not needed or desired.
    What I'm trying to do goes against the definition of what a master volume is, but I figure it's worth a shot to ask.
    The next option would be to have volume adjusters for applications which I have seen done before. 90% of the time I'm adjusting web browser volume.
    (I have medium-ish experience with Arch)
    Thanks
    Last edited by spotshot6544 (2013-09-22 21:42:48)

    tricky, but you could achieve that with alsa's softvol plugin.
    first you need to have alsa-plugins installed
    then add something like this in your ~/.asoundrc
    pcm.!default {
    type plug
    slave.pcm "softvol"
    ctl.mixer0 {
    type hw
    card 0
    pcm.softvol {
    type softvol
    slave.pcm "hw:0,0"
    control {
    name "Master2"
    card 0
    this should create software volume control called 'Master2' and make applications use it as default (you need to restart all audio applications and sound servers until it takes effect.)
    now you should be able to play white noise from mp3 and set the 'real' master channel for it's output, while all other applications are controllable via Master2. Ideally you should set your card's real master volume to 0db
    only issue with this that your white noise will be played full blast unless the application from where you're playing it from has its own software volume control. You can solve this by adding another softvol device in your .alsarc (simply copy the pcm.softvol part and change the control name from Master2 to something else) and use it as output and volume control for the noise.

  • How to keep the same cost in Sales order and return order?

    Hi experts,
    When I create a sales order with item cost 100 USD.
    Then the cost of item changed and down to 90 USD.
    When I do goods return refer to the sales order. How can I keep the same cost (VPRS) 100 USD but not 90 USD?
    I made a test the cost in sales order is 100 USD but 90 USD in return sales order.
    I want the cost in return sales order is 100 USD.
    How can I do?
    Thanks,
    Lance

    Hi,
    Let me tell u my understanding of your requirement, after the sales the cost of the item is changed to some thing low than it was in sales order or invoice, in this scenario you need to transfer the cost of the material as it is in the sale order or invoice (which you are taking as reference to create a Return Order), am i right?
    If so, you can proceed like this.
    In the copy controls of Billing to Sales orders ( F2 to RE) we have the pricing type N assigned to it ( Transfer pricing components unchanged, New Cost) here the system is reading the change of the cost again from the material master. if you don' t want it to read the material master data again we can have a change try with pricing type 'D'  (Copy Pricing elements unchanged), and try now.
    let me know the result.
    hope this will solve your problem.

  • HT5616 I have multiple phones and iPads and all are linked to one iCloud account and one iTunes Account.  I want to keep the same iTunes Account so I can share music, etc., however, I want each device to have its own iCloud account.  How do I do this?

    I have multiple phones and iPads and all are linked to one iCloud account and one iTunes Account.  I want to keep the same iTunes Account so I can share music, etc., however, I want each device to have its own iCloud account.  Any help on how I can I do this?

    You'll need to create an Apple ID for each device. Use the new Apple ID for FaceTime, iMessage and iCloud on the device. Use the original Apple ID for Settings>iTunes & App Store.

  • I have 3 i phones.  Can I have multiple accounts on one computer where it keeps the contacta and calendar for each?

    I have 3 i phones.  Can I have multiple accounts on one computer where it keeps the contacta and calendar for each?

    My daughter and I both have iphones. I created an account (not separate itunes) for her on my computer so she could sync her phone/itunes but not have it interfere with mine since we have WAY different taste in music. Creating a different computer profile should work if you have separate itunes accounts, too.
    If you all use the same itunes account, you can turn on Home Sharing. That way you can all download the same content without having to pay for it again. Not sure how or if that works with separate itunes accounts.
    Hope that helps!

  • HT2204 if i already have an apple id with my itunes and i just bought a new iphone do i want to use the same apple id for icloud as my itunes?

    If I already have an apple id for my itunes account and I purchased an iphone should i use the same apple id for the iclouid feature or set up a different one?

    Personally, I'd keep it simple and keep the same one.

  • Can I use the same Apple ID for multiple devices

    Can I use the same Apple ID for multiple devices?

    Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
    How to use multiple iPhone, iPad, or iPod devices with one computer
    Using More than One iDevice on the Same Computer
    This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
    On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
    Start by transferring the new device(s) to a new account along with all your data.  Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
    If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
    Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted.  Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
    Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
    Note: The essence of the above was created by user, randers4. I
    have made substantial changes to improve readability and syntax.

Maybe you are looking for

  • Error logging in BPC 7.0 NW Excel

    Hi, I am using BPC 7.0 NW version. I get an error message while logging in to the Excel. Whenever I open BPC excel, a message pops up telling macros have been disabled. file path: C:/program files/bpc/Ev4Excel.xla This message has two options: Enable

  • Does mx440-T has capture ability???

    I have mx440-T. I insert 1-to-4 video cable (2(S),2(C) in/out) to 9-pin jack. I plug camcorder to video in composite jack, I install vivo 2.20 and update the nvidia vga driver. I install iuvcr capture program. but when I start the program there is an

  • How do I activate Adobe Captivate 7 on a Windows 7 64 bit Laptop

    Using a Windows 7 64 bit Lenovo Laptop Have installed Adobe Captivate 7. During installation I was prompted to enter my Adobe ID and Product Serial Number. Now that installation is complete everytime I open the Adobe Captivate Application it prompts

  • Suddenly some files cannot be copied over a network

    Suddenly (I mean I was working fine without any kind of problems, and suddenly...) I got into this problem: cannot copy files to network directories but Windows SMB ones. I also found that (suddenly, I insist) I can copy JPG images that have NOT been

  • Create a task group ?

    Hi, how can i create a new task group ? With transaction PP01 i can't create a object 100 only 1001 but which transaction to create a new task group ? Thanks