ALSA: snd-via82xx - No sound but system gets very slow
Hello!
I'm using the Onboard sound chip on my Fujitsu-Siemens D1607 mainboard. It' A Sigmatel STAC9758/59 Chip and runs with snd_via82xx module (worked with SuSE 9.1 so far, at least stereo-out but no LineIn). Now when i load the module as discribed in the ALSA howto an unmute Master and PCM i still get no sound, but my system gets very slow (applications start ten times slower, loading websites also takes much more time). But snd_via82xx seems to load without errors.
ArchLinux is uptodate and i'm using a custom Kernel 2.6.7 because i need some special settings for my AVM Fritz!Card DSL.
Does anybody have any hint?
CU ActionNews
Hmm ... is tried it at root only . Strange is that even CD doesn't work. No sound. Unfortunally this config works perfectly under WindowsXP so speakers should work so far. Realy strange .... this is was amixer says:
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'Master Mono',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Headphone +3dB Boost',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Headphone Amp',0
Capabilities:
Mono:
Simple mixer control '3D Control - Switch',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control '3D Control Sigmatel - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 0 [0%]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'PCM Out Path & Mute',0
Capabilities:
Mono:
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [off]
Simple mixer control 'Center/LFE Jack',0
Capabilities:
Mono:
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on] Capture [on]
Front Right: Playback 31 [100%] [on] Capture [on]
Simple mixer control 'Line Input Source',0
Capabilities:
Mono:
Simple mixer control 'LineIn Jack',0
Capabilities:
Mono:
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on] Capture [off]
Front Right: Playback 31 [100%] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Mic Input Source',0
Capabilities:
Mono:
Simple mixer control 'Mic Select',0
Capabilities:
Mono:
Simple mixer control 'Mic1 Jack',0
Capabilities:
Mono:
Simple mixer control 'Video',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Output',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Playback AC97-SPSA',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 3 [100%]
Simple mixer control 'PC Speaker',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 0 [0%] [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Mono Output Select',0
Capabilities:
Mono:
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 15 [100%] [on]
Front Right: Capture 15 [100%] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Exchange Center/LFE',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Front Jack',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',1
Capabilities:
Mono:
Simple mixer control 'Rear Jack',0
Capabilities:
Mono:
Simple mixer control 'Sigmatel 4-Speaker Stereo',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Sigmatel Surround Phase Inversion Playback ',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'VIA DXS',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 30 [97%]
Front Right: Playback 30 [97%]
Simple mixer control 'VIA DXS',1
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control 'VIA DXS',2
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control 'VIA DXS',3
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Should be ok, but perhaps you guys find something wrong.
in dmesg and /var/log/messages i do not find anything uncommon. Most of the messages are status messages from pppd .
CU ActionNews
Similar Messages
-
after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???
You can always shut it down manually via the Task Manager
(CtrlShiftEsc)...
On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]> -
OAS 4.0.7 on SUSE Linux 6.1 gets very slow or hangs
Hallo out there,
we installed OAS 407 on a SUSE Linux 6.1 system with ORACLE
Server 8.0.5.0.0. After long time solving installation problems,
we are now able to start OAS via the OAS-Manager html page.
And we are able to launch a simple PL/SQL-application, which
produces the output of a system table. Now, the thing is, that we
can start this application once or twice or maybe a few times
more but then the system hangs or gets very slow, so that only a
hard reboot of the server machine works.
We configured the NR_TASKS parameter in tasks.h to get ulimit to
512 for the user processes. System seemed to work better then,
but maybe only a little bit better.
We have also got problems with domain-names and node-names, which
sometimes are just machinename, then machinename.domainname, then
again machinename.badister.(none) .
If there is anyone out there who has got the same problems or
solved them, please tell me.
Ralf
nullI have wasted a lot of time trying to get OAS 4.0.7 to run with
a 2.2 kernel... it doesn't work, even after you've fixed all the
problems like to ps command for example, the listeners hang. I
now have it working on a 2.0 kernel, which is reasonably stable,
although I have to do a reboot every few days!
Michael Seiwert (guest) wrote:
: Hi,
: I have a problem with installing the OAS 4.0.7 on my SuSE 6.2
: System. The 8i Database works fine.
: 1. When I try to start oasctl start & it complains about my ps
: utils ... Threads not shown etc. ..
: 2. What have to be done to run the Database Browser in
: DBUtilities ?
: Logger Tables, PLSQL Catridge ... are installed!
: 3. How could I check with a little PL/SQL Application that
: the OAS works ??
: 4. I've heard about a patch on "oracle-ftp.oracle.com"
: /patchset/internet/linux/oas40701-patch..
: Maybe this patch solves my problems ???
: I hope someone could help me with my problems!!!
: Thank you very much!
: Micha
null -
After upgrading to OS X Mavericks syslogd needs lot of memory and cpu, system is very slow
After upgrading to OS X Mavericks the system is very slow. securityd and syslogd are using 50% of cpu and memory is also used by syslogd and kerneltask (8 GB out of 12). After rebooting the system it runs very well, a view days later (without reboot, only hibernating) the situation is the same.
Looks like a problem in OS X. Any solutions?I haven't worked out the LDAP messages but I noticed at other times I was seeing lots of album art messages from BlackBerry desktop. I'd already uninstalled the app but it still had processes running. I followed this link to remove completely; http://apple.stackexchange.com/questions/57023/how-to-uninstall-completely-black berry-device-manager
CPU levels have been noticeably lower ever since. -
My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
When i start my hot backup my database getting very slow
Hi,
I am using following commands for enabling hot backup
SQL>ALTER SYSTEM ARCHIVE LOG CURRENT;
SQL>ARCHIVE LOG LIST;
SQL >ALTER DABATBASE BEGIN BACKUP;
Database altered.
SQL>SELECT FILE#,STATUS FROM V$BACKUP;
FILE# STATUS
1 ACTIVE
2 ACTIVE
3 ACTIVE
4 ACTIVE
and using cp -rp command to copy the file (backup copying speed good) but database performance very slow
How to improve performance ...
Regards
Vignesh CUwe Hesse wrote:
It is very likely that you experience slow performance with ALTER DATABASE BEGIN BACKUP , because until you do ALTER DATABASE END BACKUP , every modified block is additionally written into the online logfiles . Doesn't that happen only the first time the block is modified?
>
The command was introduced for split mirror backups, when this period is very short. Else ALTER TABLESPACE ... BEGIN/END BACKUP for every tablespace one at a time reduces the amount of additional redo during non-RMAN Hot Backup. There appear to be only 4 files. We don't know how big or sparse they are.
>
RMAN doesn't need that at all - much less redo - and also archive - generation then.
Furthermore, you can use BACKUP AS COMPRESSED BACKUPSET DATABASE to decrease the size of the backup even more - if space is an issue.
In short: Use RMAN :-)
Agree with that! Unless the copy is actually going to an NFS mount or something, where I would be concerned whether it is the type of NFS that Oracle likes. I'd also advise a current patch set, as the OP didn't tell us the exact version, and I have this nagging unfocused memory of some compression problems of the "oh, I can't recover" variety.
I'd like to see some evidence on I/O and cpu usage before giving advice. When I used to copy files like this, it would choke out everyone else. RMAN was a savior, but had to wait for local SAN upgrade. -
Why the system is very slow than before
I have two computers, One is desktop, another is laptop,but I met the problems about the performance for the two
computers, from last Monday, two computers speed are very slow, after I checked the task manager, I found the service(ntoskrnl.exe) used the 60-70% CPU resource, but why the ntoskrnl.exe cause this? I also download the tools and analysised it, but it seems
that no useful information,how to find the root cause?
summary all the information as below
1.Suddenly this problems happened
2. I closed the AVP (Kaspersky antivirus software), but it seems no improved for the performance
3. I have closed the Windows search service, but no change for this
4\I use the maxthon and Firefox browse
, all the same thing happened.
you can download the Log file from http://1drv.ms/WwTBhUHi,
Any update in this thread?
http://social.technet.microsoft.com/Forums/windows/en-US/ce42930b-f0f3-4df7-a621-d8f9d59109b4/why-the-system-is-very-slow-than-before?forum=w8itpronetworking
Regards
Yolanda Zhu
TechNet Community Support -
after keystroke/command, the system is very slow 10-15 secs. before response
What I've done is that I reinstalled 10.8.1 and each time, I ran disk utilitiy. It has helped but fter a while, especially when waking up from sleep, EVERY app can take a lot of time to come up, including those already activated. Every click would take at least 5secs to respond... and then the spinning ball comes up.
It's only after the same app was used, then it would be smooth. For example, I run my cursor down to the bottom of the screen where my dock is hidden. It would take a few times of running down before the dock shows up. From that point on, it would would work nicely unless I click on any of those apps in the dock. Then, it would take another 5secs or more before something shows on the screen such as clicking on Mail. It takes more than 5secs before mail pops up. Then, when I click on any mailbox, it would take another 5secs or the spinning ball comes up. From that point on, clicking on Mail is smooth and cicking on the same mailbox is smooth unless I click on a different mailbox or go to preferences, for example.
So, I keep running disk utility almost everyday and now, it works 99% of the time. If it slows again, I run the disk utility. I guess that's the way to go until they come up with a proper fix.
All this housekeeping work reminds me of Windows and the endless defragging and optimising. That was one of the few reasons why I switched to Apple and now...
Dear Mr Steve Jobs, please send some enlightenment to your Apple teams! -
IPad gets very slow with large apps installed ?
Hi,
I have a 64GB iPad 3 and I noticed it gets very slow when I install large apps. Apps larger than 1 GB.
I have bought a number of excellent reference apps, but can not keep them on my iPad together.
I have to delete one before I can install the next or else my iPad runs into trouble.
I can have about 5 large apps installed and no more.
It takes forever to boot, restarts, has delays when typing and crashes all the time with my large apps installed.
Is this a limitation of iOS 6, or is it because I have dropped below 10 GB of my 64GB storage.
Does my iPad use the storage for memory?
I bought a 64GB so that I could use my large apps.
Sean10GB of free space should be adequate. Have you done a Reset?
How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
How to Fix a Slow iPad
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
Cheers, Tom -
Iphone 3G gets very slow wifi specially on YouTube
Im having a very strange problem - I seem to be getting very slow internet speeds on my iphone when connected thru wifi - m laptop is on the same network and it goes blazingly fast however my iphone takes almost as much time as it does on edge networks - the youtube loading is so slow that its just not watchable from my iphone - however the same video loads at super speed on my laptop
Ive tried changing the setting from b/g to only b - but it still makes no difference.
If anyone has the same problem or if anyone knows how to help please let me knowAlso having exactly the same problem, very low speed with Youtube. I'm using my Iphone 3G with Frtitz! box fon wlan 7140 router and have Internet from Inode Austria. When using my Dell laptop, everything works O.K.
-
While creating Billing, system is very slow..performance issue
Hi,
While creating Billing, system is very slow. How can I debugg and provide the analysis where is the exact problem.
This is showing performance issue.
Waiting for kind response.
Best Regards,
Padhy
Moderator Message : Duplicate post locked.
Edited by: Vinod Kumar on May 12, 2011 10:59 AMhi,
Chk the links
http://help.sap.com/saphelp_nw04/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
Re: How to create Secondary Index?
How may secondary indices I can create on the ODS?
Deletion of ODS index
Ramesh -
Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it? -
MacBook Pro gets very slow when Safari is opened
When I open Safari, my computer gets very slow.
If I quit Safari, everything works fine.
How can I re-install Safari?
Could it be my HD? I have already repaired my HD.
Software: Mac OS X Lion 10.7.5 (11G63)reboot your computer to the recovery partition by restarting and holding the keys:
<COMMAND> + r
Follow the directions here:
http://mac.tutsplus.com/tutorials/os-x/verifying-and-repairing-permissions-in-os -x/
in the section "Working in recovery mode".
After you repair permissions also perform a disk repair then reboot: -
Why system is very slow after installing Mavericks
After installing mavericks my system becom very slow. startup also very slow. when i open an application it spins. what should i need to do
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
After upgrading Yosetime my system is very slow. Safari webpages are not opening. I can go back to Mavericks again ?
Model Name: MacBook Air
Model Identifier: MacBookAir6,1
Processor Name: Intel Core i5
Processor Speed: 1.3 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GBHi ..
Better to troubleshoot Yosemite.
Not enough free storage space can slow your Mac down.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space. OS X Tips Where did my Disk Space go?
As for Safari, might be a cookies, cache, extensions, or plug-ins issue.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, from the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
Maybe you are looking for
-
I added an e-mail account to my iphone using microsoft exchange; all went fine. I then deleted a number of contacts from my iphone that I did not want on my phone. when I went into my e-mail account on my computer the contacts were deleted from there
-
Having a blank login at start up
previously when i started my computer up i had a blank login where i filled out the username and password, but at some point it changed to where my avatar and name is provided along with the guest account. i would like to revert back to the old setti
-
Problem invoking AIR on RHEL 5.1 machine
Hi, We have been able to successfully install AIR application .rpm on REHL 5 machine. But, it just sits there but no success in being able to open it or any .sir help files using that. Please help. -Pooja
-
SQL* Loader Loading specific column from CSV file to the table
Dear All, Iam Loading specific column from .CSV file to the oracle table. Could pls help how i can load only that cols into the table Eg: CSV file having id, Frst_name,Last_name, Address,Phone,Insurance etc out of this I want to load only Frst_name,L
-
Best practices for a large application
I have an existing application that is written in character based Oracle Developer and has many forms and reports. A few years ago I converted an inquiry portion of the system to standard ASP, this portion has about 25 pages. Initially I want to rewr