ALSA sound not working. "-2 file not found"?

Question

I recently upgraded my system, changed some hardware and other things and now have figured out my sound is broken. Here is what I get:
[earlz@EarlzAlpha spotify]$ speaker-test
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
[earlz@EarlzAlpha spotify]$ sudo alsa_in
connect(2) call to /dev/shm/jack-0/default/jack_0 failed (err=No such file or directory)
jackd 0.124.1
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
could not open driver .so '/usr/lib/jack/jack_firewire.so': libffado.so.2: cannot open shared object file: No such file or directory
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to capture-only mode
cannot load driver module alsa
connect(2) call to /dev/shm/jack-0/default/jack_0 failed (err=No such file or directory)
connect(2) call to /dev/shm/jack-0/default/jack_0 failed (err=No such file or directory)
I do not have anything in /etc/asound.conf or ~/.alsa. And all of my packages are up to date. alsamixer shows my sound cards. I see this in alsamixer:
│ │ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │
│ │ │ ┌────────────────── /proc/asound/cards ───────────────────┐ │
< │ │ │ 0 [HDMI ]: HDA-Intel - HDA Intel HDMI │ >
< │ │ │ HDA Intel HDMI at 0xd0914000 irq 45│ >
< │ │ │ 1 [PCH ]: HDA-Intel - HDA Intel PCH │ >
< │ │ │ HDA Intel PCH at 0xd0910000 irq 46 │ >
< │ │ │ 2 [HDMI_1 ]: HDA-Intel - HDA ATI HDMI │ >
< │ │ │ HDA ATI HDMI at 0xd0060000 irq 47 │ >
< │ │ └─────────────────────────────────────────────────────────┘
I'm aiming to use the plain analog 3.5mm audio jack on my motherboard, not the HDMI support

Answer 1

 Do you still experience the problem? If so, read this thread. In your case, I am guessing upon your alsamixer "screenshot", modprobe options should be set to:
options snd-hda-intel index=1,0,2
 If that does not work, provide 'lspci -vvnn | grep -A 1 ''040[1-3]'.
 Should you consider this issue solved, then please mark the thread as such.