Alsa volume is low compared to Ubuntu & Windows

Hi all,
I've noticed that the Alsa volume is too low compared to ubuntu 9.10 and Windows. Even at max slider, the volume is half of that of max of windows. The pcm is set to the max setting that works without distorting the sound.
Any suggestions?
Thanks!:)

Hi,
Sorry i just returned back to archlinux after a while. Thanks for your input!:)
My sound card is a conexant, and alsa uses the hda-intel module.
I did as you said. It's usable for now, with headphones, but with bigger speakers its kind of low.
I also came to know about the hspda plugin, and audacious has the stereo volume amplifier plugin using hspda. The problem is, if i use the plugin, it does not get saved, so i have to switch it on again the next time i start audacious.
Thanks!

Similar Messages

Itunes volume is low compared to all other sources

Updated Itunes awhile back and now volume is lower than all other sources, turned my computer MIDI volume up but now everything else is loud and itunes is normal. I cant find anything on the web pertaining to a fix

Hi,
Sorry i just returned back to archlinux after a while. Thanks for your input!:)
My sound card is a conexant, and alsa uses the hda-intel module.
I did as you said. It's usable for now, with headphones, but with bigger speakers its kind of low.
I also came to know about the hspda plugin, and audacious has the stereo volume amplifier plugin using hspda. The problem is, if i use the plugin, it does not get saved, so i have to switch it on again the next time i start audacious.
Thanks!

Zen V Plus volume is lower compared to Zen Micro/Phot

Hey, well I just exchanged my Zen Micro Photo for a Zen V Plus today because they were out of stock with Micro's. Anyway, I've tried putting the Zen V Plus to full volume and it doesn't even seem loud at all (which is bad). The volume restricter is off and so is the smart volume which both make it less louder if they're on. The Zen V Plus at volume level 25 sounds like Zen Micro Photo volume level 22/23. Has anyone else converted from Zen Micro Photo to Zen V Plus, or vice versa? I just want to know if it's just me noticing the difference, but I highly doubt it is.

With the very strong possibilty of permanent hearing loss and the risk of Class Action lawsuits from consumers that have lost their hearing, it's going to be harder and harder to find a company that releases really loud players.
I've got tinnitus and it never stops- I can hear the buzzing/ringing all the time, no matter what I'm doing. I've lost a lot of hearing response in the vocal ranges and it makes it nearly impossible to understand some people's voices.

Hp omen audio volume so low after windows 10 upgrade

i upgraded to windows 10 and i find that the audio volume level is really low compared to how it was on window 8.1 i checked that realtek high definition audio driver is properly installed the volume now even when i max it out is really low its so hard to watch even youtube

It does appear the drivers were not included in the Windows 10 operating system and are not available for download on the driver page. They may be added in the future but for now we can only try using Windows Updates to install. If you go to Start > Settings > Update and Security > Make sure you're on the Windows update tab and select the Advanced settings button. Make sure the box to install optional updates is checked, and then check for available updates. Install any available updates and restart your PC. After this go into Device Manager and right click the WWAN adapter. Select Update driver software and let it search automatically. If it does not find the driver automatically try it again but select the option to specify a driver. You will get to a page that asks to select a vendor and model. Click the Windows update button to refresh the list of available drivers and look for your WWAN adapter. If you do not know which WWAN adapter is in your model (it should show the name but may show Unknown Device or Network adapter) right click on it, go to Properties and select the Details tab. Change the drop down to Hardware Ids and give me the first ID in the list. Thanks.

I recently purchased a IP5 and found that the volume is lower by 20-30% compared to an IP 3/4s.........is possible? Apple has a solution?

I recently purchased a IP5 and found that the volume is lower by 20-30% compared to an IP 3/4s.........is possible? Apple has a solution?

Of course, this all began just about 2 weeks after my 3 years of AppleCare were up....
Call Apple Customer Relations - 1-800-767-2275. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post. See what they can do for you.
GOOD LUCK!

Sound Card Volume Too Low in Windows XP

Hello,
I have installed windows xp sp2 with bootcamp and everything is working perfect.
the only problem is that - my sound card volume is low and when i restart in MacOS the sound card volume is super cool.
what shall i do ? in windows xp i can see "Cirrus Logic HD Audio" driver for sound.
anyone can help me ?

Have you done a search for ""XP sound problems"" yet?
Here's a link to one of them:
http://discussions.apple.com/thread.jspa?threadID=2037093&tstart=0&messageID=130 67584#13067584
Look through ALL the pages and see if one of them will work for you. There is a link to another place that may have some drivers that MAY work in the page that is linked above.
Hope it helps...

Laptop Audio volume very low

Hi Experts,
I bought my Inspiron laptop in January and was hoping for good sound quality based on the advertised Waves MaxxAudio. However I find the laptop volume is very low and end up holding the speakers close to my ears when doing a skype call.
Is this an issue I need to take up with warranty support or are the speaker volumes expected to be this low?

Hello. Some of the models do have adequate volume and some have low volume, but it is a subjective thing and I don't know if anyone can say that your volume is normal or not without hearing it. Even then they would need to compare it with others of the same model. If you post your model name then maybe someone with that model will express an opinion.
If the volume is low only in Skype but okay when playing an audio file from the hard drive, then probably a Skype setting. Right click on the volume icon on the taskbar and click on "Open volume mixer" to see individual volume sliders for each device.
Also you could test by switching from the vendor's audio driver (varies by model but probably Realtek) to the Windows native audio driver. If the volume seems too low (when playing audio files) with both drivers then there could be a hardware problem.
1. Open the Device Manager (type devmgmt.msc in the Windows search box).
2. Expand the "Sound, video & game controllers" and right click on "Realtek High Definition Audio".
3. Select to "Update Driver Software".
4. Click on "Browse my computer for driver software".
5. Click "Let me pick from a list of drivers on my computer".
6. Put a check in the box "Show compatible hardware" if not already checked.
7. In the list of devices, click "High Definition Audio" (the native driver).
8. Click "Next".
9. On the Update Driver Warning box, click "Yes" (install the driver).
10. Restart the laptop if prompted. If not prompted, then no need to restart.
[To get back to the Realtek driver, do it again but reverse the names in steps 1 and 6.]
Note that the above instructions are for models with a Realtek audio driver. If yours uses IDT or Conexant, look for those names in the Device Manager.

How to overwrite expired volumes with lower sequence number?

I test expiration policy.
I have a tape library with two volumes.
I defined expiration policy after some time when write windows closed.
lsv -L test_lib
in 1: volume mf_test-000001, barcode e61bcfea534e10281bb000b5df3a54e, 4148676704 kb remaining, expired
in 2: volume mf_test-000002, barcode e6251c26534e10281bb000b5df3a54e, 4148657504 kb remaining, expires 2011/04/28.11:49
How to make OSB overwrite 1st expired volume when writewindow closed on the 2nd volume (with lower sequence number)?
Is it possibly without rotation policy?
If not how to set the policy in my case?
Thanks!

Thanks, Rich!
But I have now following situation:
ob> lsv -a
VOID OOID Seq Volume ID Barcode Family Created Attributes
104 104 1 mf_test-000001 b927cfe85411102ab8e000b5df3a54e mf_test 04/29.10:53 expired
107 107 1 mf_test-000004 b93699ec5411102ab8e000b5df3a54e mf_test 04/29.13:32 closed; expires 04/29.14:32
ob> lsj -l
oracle/11:
Type: database emgc (dbid=1838014073)
Scheduled time: none
State: processed; Oracle job(s) scheduled
Priority: 100
Run on host: (administrative server)
Attempts: 0
oracle/11.1:
Type: datafile backup
Backup piece: 2jmb0c82_1_1
Family: mf_test
Encryption: awaiting job completion
Scheduled time: none
State: pending resource availability
Priority: 100
Run on host: dbsora98
Deferred because: a required device is not available
Attempts: 2
ob> catxcr --tail 100 oracle/11.1
2011/04/29.14:19:49 ______________________________________________________________________
2011/04/29.14:19:49
2011/04/29.14:19:49 Transcript for job oracle/11.1 running on dbsora98
2011/04/29.14:19:49
2011/04/29.14:19:49 ---
2011/04/29.14:19:49 No volume could be found in vl_test (for drive vd_test_2) to use for job oracle/11.1.
2011/04/29.14:19:49 A volume usable for media family mf_test is needed to perform a backup.
2011/04/29.14:21:24 ______________________________________________________________________
2011/04/29.14:21:24
2011/04/29.14:21:24 Transcript for job oracle/11.1 running on dbsora98
2011/04/29.14:21:24
2011/04/29.14:21:24 ---
2011/04/29.14:21:24 No volume could be found in vl_test (for drive vd_test_1) to use for job oracle/11.1.
2011/04/29.14:21:24 A volume usable for media family mf_test is needed to perform a backup.
Edited by: OraSun on 29.04.2011 1:38
I'm sorry, that's ok. other job is holding the 1st volume.

My speaker volume turned low

hi,
pavilion dv6 3121.
I got my notebook months back.
Had password prob, I had to format it.
Since the format I can't use de finger print feature again, my speaker volume turned low even though I downloaded necessary drivers from Hp.
I am so concerned abt de speaker cos I love virtual dj and playing other media.
Pls help me

fantastic2m wrote:
Hello sir.
My product is pavilion entertainment notebook.
And now after you replied my first complain I have put the finger print issue behind I have bug still with my sound.
I installed the sound driver as its too low and downloaded IDT SOUND DRIVER found in de driver download section.
But dis dis not solve the problem, it only got the volume just one inche louder and I tried RELTEK sound DRIVER and again this one did not change any tin.
U made mention of MSUAA what's dis about? And can it increase my speaker sound?
Pls?
Microsoft UAA Bus Driver for the audio chip integrated into your systemboard can be found at the microsoft update website. It is required as part of the operatng system. No, it won't increase the sound level your notebook is capable of. If you desire more volume then I suggest that you purchase an amplified external sound system (Creative is a decent brand) to plug into the audio out jack on your notebook.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

AC3 audio is VERY low compared to apples menu presets

AC3 audio is VERY low compared to apples menu presets,
The original aiff files are at a good level, concert footage professionally recorded, nothing peaking, nothing too low.
THe AC3 is at minus 10DB on the vu meter, the aiff peaks at 100.
The apple menu music, which are .mov files, peek at plus 1-2.
My old version of compressor did not do this.
I do not have enough room on my disk for all AIFF but I do want to use the Apple Menus and provided music.
Any thoughts?

You can increase the Ac 3 "reference level" to 0 dB (it should be -27 dB)
Reference level? There is no such thing - I believe you are referring to Dialog Normalization, and it is extremely unwise to set this to zero... it is most certainly not a good way of increasing the overall volume of the file. -27 happens to be the application's default value, but it in no way means it should be set to -27. There are a few factors you need to consider when using AC3 encoding...
The DNV setting is the amount of attenuation that the file will get, according to a formula:
attenuation = 31 + DNV setting
Therefore if you set the DNV to be 0 you will alter all AC3 streams by 31 Db, which is enough to make it unplayable without serious distortion:
0 = 31 + (-31)
If you want to get the exact same audio levels out of A.Pack (or Compressor 2, if you are using that) then your DNV setting should be set to -31. This means there is absolutely NO attenuation to the file, meaning you get the same levels out as went in...
What I recommend here is to edit the audio in an application such as Peak and get it sounding exactly as you want it. When you encode to AC3 set the DNV to -31 and set the compression to 'none' (not film standard or anything else, there's nothing worse than badly applied compression). These settings then give you a basic output which is nearer to what you start off with. The other setting much talked about is RF Overmodulation protection. This is useful to turn on if you think the player will be sending the output signal to an RF input on a TV rather than through scart or something else. It certainly used to be the case that such signals were boosted by 11db, causing overmodulation. The setting is a way of preventing that hapening, but as more and more folk have stopped using RF as an input it makes sense to turn it off. If in doubt, turn it on, but listen to the output file and see if it is acceptible.
As for the basic bitrate, for a stereo file, lower it to no less than 192kbps.
Now, if you want to run a few tests, then keep all the settings above and encode the same 10 second piece of audio. Change the DNV to -31, then -20, then -8 and then 0 and play the resulting files back and listen to what happens each time.
Head over to http://www.macprovideo.com and download some of the tutorials there for A.Pack. They have been created by Martin Sitter (who has helped and guided me more than once) and will give you a far better understanding of AC3 encoding than anything else I can think of. You will pay for them, but it is a wise investment if you are at all unsure of how to get the best audio onto your discs. Let's face it, audio accounts for at least 2/3rds of the experience when watching TV - it is as well to get it right.

Nokia C3 alarm volume very low

Hi Support,
I got a Nokia c3 recently. The volume of the alarm is very low for any tone. I even tried with mp3 music. But they are still low compared to that of played using music player.
Does any one have a similar problem? Is there any volume control available alarm clock?
Kindly update me soon.
Regards,
Joshua

joshua_d, when you say "The volume of the alarm is very low for any tone" are you referring at the stage when you select a tone for the alarm. (I mean when you are in the alarm app selecting a tone to personalize the tone)?
If you are complaining at this stage, then nothing to worry because what you hear at this point is just a sample of the tone (and not the actual output when played).
So just to test it select a preferred tone & try out the actual alarm when it is played. Hopefully your issue should be sorted.
Pls click the green star at left if you find my post useful.
C3-00 V07.20 Devices since 1999 Motorolla A130 ETACS, MicroTAC ETACS, M3788, Accompli 008, C200 Nokia RinGoIII (NHX-7A) ETACS, 7250i, 3210, 5210, 6030, 3230, 2300, 2310, 3110c, 6300 Ericsson KF788 TDMA, A1018s Sony Ericsson K510 Samsung SGH-600, C210, GT-C3200 Blackberry 7130g

Song volume too low at 100%

Other than the volume slider under the song info window, is there a way to increase the volume of recorded mp3s? I recorded some audio mp3s but the volume is lower than my other songs even after increasing it to 100%. Thanks.

you could give iVolume a shot.
happy new year !

AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB

AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB. IWANT DEGRADE IT TO IOS 7.1.2

You must have upgraded the device directly through WIFi, restore your device via ITUNES and thats gonna work, it will reduce the space occupied by the new software installation

Why is the max volume so low on my ipod 6th gen

why is the max volume so low on my ipod 6th gen

Well, my volume control certainly does influence the start up chime and I cannot see why yours shouldn't. Use keyboard buttons F11 and F12 to adjust your sound level last thing at night and if your machine auto starts in the morning it will not wake the household.
True, if volume control is turned down to a lower level, you would have to adjust it for other sound output that you do want later, iTunes and videos on browsers etc, but it requires little effort.

Why is the volume so low on my iMac when I'm using Safari?

Why is the volume so low on my iMac when I'm using Safari?
On both my 2008 MBP and my new 2014 iMac 27" when I listen to the audio portion of a streaming video or news story using Safari, I can hardly hear anything. I have to crank the volume all the way up just to barely hear what is being said. Any ideas on how to fix this?

please help!! I have the new 2014 iMac 27" as well, same thing happen to me. Dont know what to do!

Alsa volume is low compared to Ubuntu & Windows

Similar Messages

Maybe you are looking for