ALSA volumes not stored properly - what gives?

Recently, I've encountered a problem wherein my ALSA settings are not stored, even though I have the alsa daemon running. The relevent settings are for PCM and CD - when I shut down, both are at 100 and unmuted; after booting, PCM is at 100 and muted, and CD is at 0 and muted. Any other changes I make are also lost on the next bootup. What is going on?

same here. I suspect its a udev thing; the devices haven't had time to set up when alsa is called. I added
sleep 5
underneath
stat_busy "Restoring ALSA Levels"
in /etc/rc.d/alsamixer and it works ok. Since I background the alsa daemon, this doesn't slow down bootup. THere's got to be a better way.
Dusty

Similar Messages

HT200197 NO audio using Apple TV for streaming materials, and YES audio for Mac stored ones; what gives?

NO audio using Apple TV for streaming materials, and YES audio for Mac stored ones; what gives?

Hello Cravate,
The following article provdies some useful troubleshooting that can help resolve audio issues with your Apple TV.
Apple TV (2nd and 3rd generation): Troubleshooting audio issues
http://support.apple.com/kb/TS5150
Cheers,
Allen

HT1338 i think my java is not working properly what do i do

i think my java is not working properly what do i do

Java 7 updated for 10.7-10.8
Released Feb 1, 2013, fixes 50+ security flaws
http://www.esecurityplanet.com/patches/oracle-responds-to-java-security-flaws-wi th-50-fixes.html
Download and install
https://www.java.com/en/download/faq/java_mac.xml
For Java versions 6 and below OS X 10.5-10.6 machines
Apple supplies their own version of Java. For Mac OS X 10.6 and below, use the Software Update feature available under the Apple menu to check that you have the most up-to-date version of Java 6 for your Mac.
https://www.java.com/en/download/faq/java_6.xml
Java SE 6 End of Public Updates
After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. We highly recommend downloading and installing Java 7.
If your considering upgrading OS X from 10.6.8 to 10.8 via AppStore to run Java 7
Be forewarned no PowerPC based programs or driver software will run any longer.
Check here BEFORE you upgrade OS X!
http://roaringapps.com/apps:table
Alternatives if you must run Java 7
If Apple disabled Java 6 in 10.6, and you can't upgrade OS X to 10.8, then your pretty much done with Java in OS X because Oracle won't issue updates for Java 6 anymore.
However you can install Windows 7 and continue to use Java 7+ there until support for Windows 7 ends in 2020.
Windows in BootCamp or Virtual Machine?
If your on 10.6, I very highly recommend the free Virtualbox for the virtual machine software as it gets updates, VMFusion and Parallels have moved on with only 10.7+

HT201209 It say it's not activated properly what does that mean

My iTunes gift card is not activated properly what does that mean?

iTunes Gift Cards do not contain any balance until they are activated at the point of purchase. This means your Gift Card cannot be redeemed. Go back to where you purchased the gift card and ask the retailer to activate it for you.

Adobe will not update the Inspiration Browser, Download update does not work. What gives?

Followed instructions for Inspiration update browser and it did not install. What gives?

If you are using the welcome screen try updating directly from the Organizer but first open your web browser and make sure you are logged in to Photoshop.com on-line.
Then launch Photoshop Elements Organizer
On the menu bar click Help >> Elements Inspiration Browser
Enter your ID and password
In the installation dialog click Install

Trying to update Apple TV software, but keep getting "update was not successful" message--what gives?

Trying to update Apple TV software, but keep getting "update was not successful" message--what gives? Definitely have wifi connectivity.

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Lately pdf files from the Web do not display properly; what is wrong and how can I fix it so I don't have to use IE?

I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?

My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
I must agree with pgwebgirl!

MAC 2009 laptop volume not working properly.

The volume on my Mac 2009 laptop is not functioning properly. Earlier today i was listening to music and the sound was fine; but when I went on my computer again, the sound sounded like I had headphones plugged in, which I did not. I checked the sound settings and nothing was on mute and all the volume's were set to the highest level possible. I restarted my computer and reset the NVRAM/PRM, but all to no avail. When I put on my headphones, the sound is completely normal and works prefectly, but when I take the headphones out, it sounds like the headphones still in plugged in to my computer which it is not.
Any help will be greatly appreciated.
Thanks!

Hello parry,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Have a nice day,
Mario

My Trackpad is not working properly, What shall i do?

Trackpad is not functioning properly once i updated my computer last night it worked perfectly but by the end of the night it start to act funny!

Why not describe the funny behavior?

Whenever I try to redeem my gift card it tells me it was not activated properly, what do i do??

i bought an app store card for $25 and when i tried to put it in itunes it told me it was not redeemed properly. the activation from the cashier was successful but this keeps happening. please help, thank you.

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note: iTunes Gift Cards are only Valid in Country of Issue.

HT4101 I have photos on an SD card. when I plug iCard reader into ipd3 it says no photos found. I was able to import some photos at first but not now. What gives?

I have photos on a 4g SD card. When I plug iCard reader int iPad it says : No photos found. I had used this method to a few pics on iPad when I first got it, but it doesn't work now. What gives?

How did the photos get onto the card ? If you copied them onto it from your computer then you need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them

My IPod touch 4G's volume and lock buttons have been not working properly What should I do that isn't too costly

My iPod volume and lock button have not been working right ever since its battery died it did start to work again but then it stopped working. I'm very confused about how I should go about fixing this please help.

Try:
- Reset the iOS device As best you can). Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If not under warranty or abused
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Try fixing it yourself if you are up to it
iPod Touch Repair – iFixit

HT200160 Using a D-Link DNS-320 NAS. No problem connecting with afp protocol from a MBP OS10.8. MBP OS10.9 hangs up; shows the volumes, but never connects or time out. "Finder Not Responding." What gives?

Similar problem on a Mac Mini running OS10.9 Mavericks. Note: Several weeks ago I posted a comment about Console displaying error messages when my MBP running 10.9 was connected to the DNS-320, but the 10.8 machine doesn't display those same messages. Might be related.

I had the same problem with a D-link DNS-320.
The following worked for me (Manual back up):
Set Time Machine backups off to allow manual back-up.
Create one alias of your NAS share in the desktop. (I don’t know why, I first had to create the share alias in a external USB drive and then move the alias to the desktop cause mavericks didn’t allow me to create the alias directly in the desktop.)
After using the “back up now” option in the time machine menu, just wait for a couple of seconds and double click your time machine share alias. This will mount the share and time machine back up starts immediately.
It seems as if double click initialize the communication and then the back up works normally.
I hope this helps.
Jcarlos

[SOLVED] ALSA firmware not loading properly with kernel 3.8.6-1

Hi All,
I have a E-MU 1820 card + breakout box that have been working beautiful under Archlinux for years but now something happen.
It still work OK under windows (dual boot same computer).
Normally during boot all indicators on the breakout box blink and then only thin show is clock setting indicator. But now all the indicators still blink but instead it is a -12 dB indicator that light up and not the clock settings and no sound.
dmesg show following.
[christer@Arch ~]$ dmesg | grep emu
[ 5.269612] emu1010: Special config.
[ 5.269731] emu1010: EMU_HANA_ID = 0x7f
[ 5.274685] emu1010: firmware file = emu/hana.fw, size = 0x133a4
[ 13.465727] emu1010: Hana Firmware loaded
[ 13.465776] emu1010: Hana version: 3.4
[ 13.465864] emu1010: Card options = 0x0
[ 13.465888] emu1010: Card options = 0x0
[ 13.466379] emu1010: Card options3 = 0x0
[ 14.486723] emu1010: Loading Audio Dock Firmware
[ 16.477785] emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x36
[ 16.477809] emu1010: EMU_HANA+DOCK_ID = 0x55
[ 16.477809] emu1010: Audio Dock Firmware loaded
[christer@Arch ~]$
aplay -l looks like it did before.
[christer@Arch ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 3: emu10k1 [Multichannel Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
[christer@Arch ~]$
lsmod
[christer@Arch ~]$ lsmod | grep emu
snd_emu10k1 140245 1
snd_util_mem 2403 1 snd_emu10k1
snd_hwdep 6428 1 snd_emu10k1
snd_ac97_codec 113456 1 snd_emu10k1
snd_rawmidi 18831 1 snd_emu10k1
snd_seq_device 5268 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_dummy
snd_pcm 78146 3 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_page_alloc 7426 2 snd_pcm,snd_emu10k1
snd_timer 18934 3 snd_pcm,snd_seq,snd_emu10k1
snd 60156 13 snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_device,snd_mixer_oss
[christer@Arch ~]$
From what I can see all looks OK, like it did when it worked, but something is not at it should.
Any thoughts or ideas about what might have happen or how to progress in troubleshooting.
All input most welcome.
I found info describing problem with firmware loading, but it is over my head.
http://git.kernel.org/cgit/linux/kernel … 54cf7008ab
Output from Aadebug ( http://alsa.opensrc.org/Aadebug )
[christer@Arch ~]$ ./alsadebug
ALSA Audio Debug v0.2.0 - Fri Apr 12 20:46:05 CEST 2013
http://alsa.opensrc.org/aadebug
http://www.gnu.org/licenses/agpl-3.0.txt
Kernel ----------------------------------------------------
Linux Arch 3.8.6-1-ARCH #1 SMP PREEMPT Sat Apr 6 07:27:01 CEST 2013 x86_64 GNU/Linux
Advanced Linux Sound Architecture Driver Version k3.8.6-1-ARCH.
Loaded Modules --------------------------------------------
snd_emu10k1 139271 2
snd_util_mem 2339 1 snd_emu10k1
snd_hwdep 6364 1 snd_emu10k1
snd_pcm_oss 38511 0
snd_mixer_oss 14995 1 snd_pcm_oss
snd_ac97_codec 112216 1 snd_emu10k1
snd_seq_dummy 1463 0
snd_seq_oss 29098 0
snd_seq_midi_event 5660 1 snd_seq_oss
snd_rawmidi 18742 1 snd_emu10k1
snd_seq 49946 5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device 5180 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_dummy
snd_pcm 76956 4 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_page_alloc 7298 2 snd_pcm,snd_emu10k1
snd_timer 18687 3 snd_pcm,snd_seq,snd_emu10k1
snd 58893 14 snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_device,snd_mixer_oss
Proc Asound -----------------------------------------------
0 [EMU1010 ]: Audigy2 - E-mu 1010 [MAEM8810]
E-mu 1010 [MAEM8810] (rev.3, serial:0x40011102) at 0xd000, irq 19
1: : sequencer
2: [ 0- 0]: hardware dependent
3: [ 0- 1]: raw midi
4: [ 0- 0]: raw midi
5: [ 0- 3]: digital audio playback
6: [ 0- 2]: digital audio playback
7: [ 0- 2]: digital audio capture
8: [ 0- 1]: digital audio capture
9: [ 0- 0]: digital audio playback
10: [ 0- 0]: digital audio capture
11: [ 0] : control
33: : timer
00-00: EMU10K1 (FX8010)
00-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1
00-01: emu10k1 mic : Mic Capture : capture 1
00-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : capture 1
00-03: emu10k1 : Multichannel Playback : playback 1
Client info
cur clients : 3
peak clients : 3
max clients : 192
Client 0 : "System" [Kernel]
Port 0 : "Timer" (Rwe-)
Port 1 : "Announce" (R-e-)
Connecting To: 15:0
Client 14 : "Midi Through" [Kernel]
Port 0 : "Midi Through Port-0" (RWe-)
Client 15 : "OSS sequencer" [Kernel]
Port 0 : "Receiver" (-we-)
Connected From: 0:1
Client 16 : "E-mu 1010 [MAEM8810]" [Kernel]
Port 0 : "Audigy MPU-401 (UART)" (RWeX)
Port 32 : "Audigy MPU-401 #2" (RWeX)
Client 17 : "Emu10k1 WaveTable" [Kernel]
Port 0 : "Emu10k1 Port 0" (-We-)
Port 1 : "Emu10k1 Port 1" (-We-)
Port 2 : "Emu10k1 Port 2" (-We-)
Port 3 : "Emu10k1 Port 3" (-We-)
Dev Snd ---------------------------------------------------
total 0
drwxr-xr-x 2 root root 60 Apr 12 20:42 by-path
crw-rw----+ 1 root audio 116, 11 Apr 12 20:42 controlC0
crw-rw----+ 1 root audio 116, 2 Apr 12 20:42 hwC0D0
crw-rw----+ 1 root audio 116, 12 Apr 12 20:46 hwC0D2
crw-rw----+ 1 root audio 116, 4 Apr 12 20:42 midiC0D0
crw-rw----+ 1 root audio 116, 3 Apr 12 20:42 midiC0D1
crw-rw----+ 1 root audio 116, 13 Apr 12 20:46 midiC0D2
crw-rw----+ 1 root audio 116, 14 Apr 12 20:46 midiC0D3
crw-rw----+ 1 root audio 116, 10 Apr 12 20:42 pcmC0D0c
crw-rw----+ 1 root audio 116, 9 Apr 12 20:43 pcmC0D0p
crw-rw----+ 1 root audio 116, 8 Apr 12 20:42 pcmC0D1c
crw-rw----+ 1 root audio 116, 7 Apr 12 20:42 pcmC0D2c
crw-rw----+ 1 root audio 116, 6 Apr 12 20:42 pcmC0D2p
crw-rw----+ 1 root audio 116, 5 Apr 12 20:42 pcmC0D3p
crw-rw----+ 1 root audio 116, 1 Apr 12 20:42 seq
crw-rw----+ 1 root audio 116, 33 Apr 12 20:42 timer
CPU -------------------------------------------------------
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2000.000
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2000.000
RAM -------------------------------------------------------
MemTotal: 4051696 kB
SwapTotal: 51196 kB
Hardware --------------------------------------------------
01:00.0 VGA compatible controller: NVIDIA Corporation G94 [GeForce 9600 GT] (rev a1)
05:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Interupts -------------------------------------------------
CPU0 CPU1
0: 48 0 IO-APIC-edge timer
1: 1 1 IO-APIC-edge i8042
6: 1 2 IO-APIC-edge floppy
8: 0 1 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 4 1 IO-APIC-edge i8042
16: 529 493 IO-APIC-fasteoi uhci_hcd:usb1, pata_jmicron, nvidia
18: 10654 10645 IO-APIC-fasteoi uhci_hcd:usb3, ehci_hcd:usb4, uhci_hcd:usb8, firewire_ohci, i801_smbus
19: 3621 3626 IO-APIC-fasteoi uhci_hcd:usb7, snd_emu10k1
21: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
23: 0 0 IO-APIC-fasteoi ehci_hcd:usb5, uhci_hcd:usb6
44: 7637 7652 PCI-MSI-edge ahci
45: 11719 11736 PCI-MSI-edge eth0
NMI: 47 47 Non-maskable interrupts
LOC: 49551 45081 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 47 47 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 28730 28313 Rescheduling interrupts
CAL: 94 54 Function call interrupts
TLB: 3503 3509 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 1 1 Machine check polls
ERR: 0
MIS: 0
[christer@Arch ~]$
output from systemctl show somw inacive sound related sevices.
alsa-restore.service loaded inactive dead Restore Sound Card State
alsa-store.service loaded inactive dead Store Sound Card State
auditd.service error inactive dead auditd.service
display-manager.service error inactive dead display-manager.service
dmeventd.service loaded inactive dead Device-mapper event daemon
emergency.service loaded inactive dead Emergency Shell
lvmetad.service loaded inactive dead LVM2 metadata daemon
plymouth-quit-wait.service error inactive dead plymouth-quit-wait.service
plymouth-start.service error inactive dead plymouth-start.service
rc-local-shutdown.service loaded inactive dead /etc/rc.local.shutdown Compatibility
rescue.service loaded inactive dead Rescue Shell
systemd-...console.service loaded inactive dead Dispatch Password Requests to Console
systemd-...rd-wall.service loaded inactive dead Forward Password Requests to Wall
systemd-fsck-root.service loaded inactive dead File System Check on Root Device
systemd-...e8ee844.service loaded inactive dead File System Check on /dev/disk/by-uuid/9751ee37-e769-4bbe-9436-2d8e5e8ee844
systemd-...ev-sda2.service loaded inactive dead File System Check on /dev/sda2
systemd-...ev-sda4.service loaded inactive dead File System Check on /dev/sda4
systemd-initctl.service loaded inactive dead /dev/initctl Compatibility Daemon
systemd-...l-flush.service loaded inactive dead Trigger Flushing of Journal to Persistent Storage
systemd-...ed-load.service loaded inactive dead Load Random Seed
systemd-...ed-save.service loaded inactive dead Save Random Seed
systemd-...ad-done.service loaded inactive dead Stop Read-Ahead Data Collection
systemd-shutdownd.service loaded inactive dead Delayed Shutdown Service
systemd-...s-clean.service loaded inactive dead Cleanup of Temporary Directories
systemd-...unlevel.service loaded inactive dead Update UTMP about System Runlevel Changes
systemd-...hutdown.service loaded inactive dead Update UTMP about System Shutdown
ypbind.service error inactive dead ypbind.service
emergency.target loaded inactive dead Emergency Mode
final.target loaded inactive dead Final Step
nss-lookup.target loaded inactive dead Host and Network Name Lookups
nss-user-lookup.target loaded inactive dead User and Group Name Lookups
remote-fs-pre.target loaded inactive dead Remote File Systems (Pre)
remote-fs-setup.target error inactive dead remote-fs-setup.target
rescue.target loaded inactive dead Rescue Mode
runlevel1.target error inactive dead runlevel1.target
runlevel2.target error inactive dead runlevel2.target
runlevel3.target error inactive dead runlevel3.target
runlevel4.target error inactive dead runlevel4.target
runlevel5.target error inactive dead runlevel5.target
shutdown.target loaded inactive dead Shutdown
syslog.target error inactive dead syslog.target
umount.target loaded inactive dead Unmount All Filesystems
All the best!
Christer
Last edited by agkbill (2013-04-15 18:41:03)

Thank you mich41!
It looks like a kernel bug.
I downgraded to 3.7.10-1 then firmware loaded OK and I could play sounds.
Upgraded to 3.8.6-1 then the firmware fail to load.
Something looks not ok with 3.8.6-1.
Best regards,
Christer

I can log into iTunes and App Store but NOT iMessage. What gives?

I'm currently using Wifi with my 3rd gen iPad. iOS 6.0.1. I'm not home so I don't have access to my iMac (actually currently at 30k ft somewhere over Virginia :) ).
Anyway, I can log into iTunes, access the App Store, sign out of those, log back in. No prob. I used my appleID and pass to write this message. But I cannot get into Imessage, and I can't figure it out!
I get an error saying: "could not sign in. Please check your network connection and try again." If I try to make a new appleID, imessage thinks and thinks...nothing happens.
This isn't a new issue, it's been like this for quite a while, since upgrading to iOS 6 months ago. How can I get into imessage on my ipad? For what it's worth, it works fine on my iPhone.
Would appreciate any help!

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note:
Some In-App Purchases require a Credit Card.

ALSA volumes not stored properly - what gives?

Similar Messages

Maybe you are looking for