ALSB 3.0- SPLIT-JOIN

Hi All,
I have tried to create a split-join flow. I have selected an operation from a wsdl whch has soap header included in the binding. I got an error like "Binding contains operations with soap headers which is not supported". Could you please let me know how can I pass header to the split join flow.
Thanks
Roshni

Hi!
I´m Facing the same message Error, did you find the way to send the credentials trhough the Split Join?
Thanx in Advanced!
Kind Regards,
Gerardo J

Similar Messages

ALSB 3.0 split join error: sch-props-correct.2: Duplicate global type

Hi all,
I take 'Invoke Service' node to call external service. i'll select the operation required. that time i'm getting the following error:
"error: sch-props-correct.2: Duplicate global type: GetStateListRequestType@http://www.abcd.com (Original global type found in file: null)" during type system creation prior to validation led to incomplete validation.
Is it a bug? any patch is available for this?
Can anybody help if one has an idea on this?
Thanks in advance,
Ganesh
Edited by ganeshgadi at 05/28/2008 6:24 AM
Edited by ganeshgadi at 05/28/2008 6:25 AM

Sounds like a Workshop bug which I have seen before.
A couple questions to pinpoint it:
1. Are you use using either a BARE service (no operation name in the reqeust) or 2. are you using imports in your wsdl?
If 2 then I think there is a patch.
If 1, then like me, you may be out of luck.

Exception while executing split join in ALSB

Hi
When i am executing splitjoin flow in ALSB i am getting below exception
####<Nov 29, 2010 5:02:17 AM EST> <Error> <BPEL Kernel> <gifsmrt> <AdminServer> <[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1291024937262> <BEA-2032000> *<Error during invocation of "MICAPI/Proxy Services/SplitJoin" for event "CPS_IWGIF_Proxy@GetContractFinance" of type "com.bea.bpel.internal.dispatcher.message.ServiceResponseMessageExchangeImpl".*
*com.bea.bpel.interpreter.exception.MissingReplyException: The message for partner link 'SplitJoin', operation 'GetContractFinance' and message exchange token 'null' has not been replied to.: Fault [{http://docs.oasis-open.org/wsbpel/2.0/process/executable}missingReply] The message for partner link 'SplitJoin', operation 'GetContractFinance' and message exchange token 'null' has not been replied to.*Executing Process Reference: MICAPI/Proxy Services/SplitJoin; instance ID: uuid:11d1def534ea1be0:-5e2ac50e:12b0eb1ffb4:-7b00; thread: Thread 26 (RUNNING); frame ID: null; location: null
at com.bea.bpel.interpreter.internal.InterpreterFactory$ReplyEventListener.onTerminate(InterpreterFactory.java:84)
at com.bea.bpel.interpreter.internal.state.StateContainerImpl.terminate(StateContainerImpl.java:131)
at com.bea.bpel.interpreter.internal.program.StackFrameImpl.delete(StackFrameImpl.java:558)
at com.bea.bpel.interpreter.internal.program.StackFrameImpl.delete(StackFrameImpl.java:572)
at com.bea.bpel.interpreter.internal.program.StackFrameImpl.terminate(StackFrameImpl.java:535)
at com.bea.bpel.interpreter.internal.program.ExecutionThreadImpl.pop(ExecutionThreadImpl.java:79)
at com.bea.bpel.interpreter.internal.program.ProgramImpl.pop(ProgramImpl.java:395)
at com.bea.bpel.interpreter.internal.operation.transition.FaultTransition.raise(FaultTransition.java:220)
at com.bea.bpel.interpreter.internal.operation.transition.FaultTransition.execute(FaultTransition.java:85)
at com.bea.bpel.interpreter.internal.Interpreter.postProcess(Interpreter.java:224)
at com.bea.bpel.interpreter.internal.Interpreter.interpret(Interpreter.java:169)
at com.bea.bpel.interpreter.internal.Interpreter.invoke(Interpreter.java:82)
at com.bea.bpel.internal.dispatcher.EngineManagerImpl.dispatch(EngineManagerImpl.java:55)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEventMessage(SchedulerServiceContextImpl.java:184)
at com.bea.bpel.internal.dispatcher.SchedulerServiceContextImpl.fireEvent(SchedulerServiceContextImpl.java:67)
at com.bea.alsb.flow.scheduler.SchedulerServiceImpl$1.run(SchedulerServiceImpl.java:35)
at weblogic.work.ContextWrap.run(ContextWrap.java:41)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:464)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
and fault message as
<con1:faultcode xmlns:exec="http://docs.oasis-open.org/wsbpel/2.0/process/executable">exec:missingReply</con1:faultcode>
<con1:faultstring>The message for partner link 'SplitJoin', operation 'GetContractFinance' and message exchange token 'null' has not been replied to.</con1:faultstring>
Can someone let me know what might went wrong in my flow?

mmm as far as I remember it's available only in 3.0, not in 2.6
http://download.oracle.com/docs/cd/E11036_01/alsb30/userguide/splitjoin.html
and see also the excellent Biemond blog http://biemond.blogspot.com/2008/11/split-join-in-oracle-service-bus.html

Unexpected error compiling the runtime metadata for Split-Join.

Hi Everyone,
We are getting below error while restarting the managed servers on Weblogic. We are having 6 managed servers in our cluster. In one of the application in OSB10.3, we are using SplitJoin to call third party webservices. The application is getting deployed properly, and sometimes on one of the managed nodes, we are seeing below error during startup. The servers are coming into Running mode as per the console, but in logs we are seeing the error. No services are accessible on that particular managed node. We have to restart the server and by luck, it will come up properly. This is inconsistent behaviour from the managed servers. Below is the stack trace from stdout files. Any help would be greatly appreciated...
<Jan 24, 2012 5:49:34 PM CST> <Error> <OSB FLOW Kernel> <BEA-2031003> <Split-Join deployment error during load notification: Unexpected error compiling the runtime metadata for Split-Join: "FISRecXferInqServiceV2_0/SplitJoin/RecXferInqSJ".
com.bea.bpel.compiler.CompilerException: Unexpected error compiling the runtime metadata for Split-Join: "FISRecXferInqServiceV2_0/SplitJoin/RecXferInqSJ".
com.bea.bpel.compiler.CompilerException: Unexpected error compiling the runtime metadata for Split-Join: "FISRecXferInqServiceV2_0/SplitJoin/RecXferInqSJ".
     at com.bea.alsb.flow.compiler.ProcessMetaDataFactory.create(ProcessMetaDataFactory.java:99)
     at com.bea.alsb.flow.resources.ResourceDeployer.deploy(ResourceDeployer.java:104)
     at com.bea.alsb.flow.resources.ResourceDeployer.access$100(ResourceDeployer.java:64)
     at com.bea.alsb.flow.resources.ResourceDeployer$LoadListener.onLoad(ResourceDeployer.java:545)
     at com.bea.wli.config.impl.ResourceListenerNotifier.sendLoadNotificationsInContext(ResourceListenerNotifier.java:239)
     Truncated. see log file for complete stacktrace
>
<Jan 24, 2012 5:49:34 PM CST> <Error> <ConfigFwk> <BEA-000000> <Failed in onLoad. Will not deliver the remainder of onLoad notifications to this listener.
java.lang.RuntimeException: Unexpected error compiling the runtime metadata for Split-Join: "FISRecXferInqServiceV2_0/SplitJoin/RecXferInqSJ".
     at com.bea.alsb.flow.resources.ResourceDeployer$LoadListener.onLoad(ResourceDeployer.java:551)
     at com.bea.wli.config.impl.ResourceListenerNotifier.sendLoadNotificationsInContext(ResourceListenerNotifier.java:239)
     at com.bea.wli.config.impl.ResourceListenerNotifier.access$400(ResourceListenerNotifier.java:41)
     at com.bea.wli.config.impl.ResourceListenerNotifier$1.execute(ResourceListenerNotifier.java:152)
     at com.bea.wli.config.transaction.TransactionalTask._doExecute(TransactionalTask.java:217)
     Truncated. see log file for complete stacktrace
com.bea.bpel.compiler.CompilerException: Unexpected error compiling the runtime metadata for Split-Join: "FISRecXferInqServiceV2_0/SplitJoin/RecXferInqSJ".
     at com.bea.alsb.flow.compiler.ProcessMetaDataFactory.create(ProcessMetaDataFactory.java:99)
     at com.bea.alsb.flow.resources.ResourceDeployer.deploy(ResourceDeployer.java:104)
     at com.bea.alsb.flow.resources.ResourceDeployer.access$100(ResourceDeployer.java:64)
     at com.bea.alsb.flow.resources.ResourceDeployer$LoadListener.onLoad(ResourceDeployer.java:545)
     at com.bea.wli.config.impl.ResourceListenerNotifier.sendLoadNotificationsInContext(ResourceListenerNotifier.java:239)
     Truncated. see log file for complete stacktrace

Most 8.1 development was done with Workshop (the version before Eclipse integration). It is not set up to do Workshop Framework builds with Eclipse OOTB.
If you are going to use Eclipse, then I would guess that your builds would be best done using Ant or similar. Check out the wls web service samples that install with the product and see if you can use any of those as a basis for using ANT in Eclipse.
This is only theory, as I have not worked extensively with 8.1.

Problem with variable inside split-join

Hello,
I'm using Oracle BOM Suite 10.3.0.0 and i want to use the split gateway.
In general the split activity ends with a join.
the problem is when i affect a value to a variable between the split and join, it could not get this value after the join, which means after the join the variable becomes empty just like it was before the split.
could anyone help me please.
thanks

HI
Case 1: Instance variables are not shared:
At join you can copy the variables from one of the branches to the main instance (that waits at join).
this.instanceVar = copy.instanceVar
This will copy the value of variable 'instanceVar' from the instance that just arrived at join to the instance that was waiting at join (main instance)
Case 2: Instance variables are shared:
This would mean that the main instance shares its variables with the child instances (instances between split - join). In such a case, when a variable is updated by any of the branches, the change is reflect in all the copies.
You can set the property to share or not to share instance variables, in the advanced properties of the split activity.
HTH
SAtinder

How can I Route to two proxies or business services with out split join

Hi,
How are you?
I´m trying to use a proxy to invoke 2 other proxiers or more at the same time but when trying to build a Split Join is giving an Error about the Security that is in the WSDL which is WSSecurity, so far I think that SPlit Join can´t handle this and is a must right now so I´m trying to figure out how to Route a Message to two proxies or business services doesn´t matter if it is in a secuencial way.
Hope somebody knows what to do.
Kind Regards,
Gerardo J

Hi!
Thanx for the response, That´s the way I´m implementing it at this moment and is working fine.
Thanx in Advanced!
Kind Regards,
Gerardo J

Split-Join, unable to set SOAP:HEADER in OSB at Invoke Service Component.

Hi Experts,
i created a Split-join for parallel processing and invoke third party services, but this service requires some mandatory elements in soap:header like WS-Addressing and, WSA-TO and some security infomation, but i don't know how to pass header in invoke service step. Please help me to setup Header for Invoke services in split join.
Please help me to resolve this issue.
Thanks
Ankit

see this :https://forums.oracle.com/thread/951618
not the most fancy way, but you can create some sort of wrapper proxyservice in front of your business service to make it work

For each sample example in OSB without Split join

Hi,
Any body have sample example for For each in OSB without Split join......Thanks in advance

I know this is an old thread, but I just ran into this same problem. Wow! That's a crappy 'feature'. I wasted 4 hours this morning on this thinking it was me doing something wrong in my xpath, but nope, you need to cast the counter to an int .......
I hope they fix things like this in the next major release.
Thanks for the solution.

Oracle Service Bus 10.3 - split join how to set header for invoked service

In Oracle Service Bus 10.3 how can I set the header for the service being invoked. We make parallel calls to 2 different business services. One of the invoked service requires header to be set and I am unable to figure out how it can be done. Below are snippet of the code and WSDL.
--- Login Operation start ---
<operation name="login">
<wsdlsoap:operation soapAction="blah"/>
<input name="loginRequest">
<wsdlsoap:body use="literal"/>
<wsdlsoap:header message="passport:loginHeader" part="hppwsHeaderElement" use="literal"/>
</input>
<output name="loginResponse">
<wsdlsoap:body use="literal"/>
</output>
<fault name="genericFaultException">
<wsdlsoap:fault name="genericFaultException" use="literal"/>
</fault>
</operation>
--- Login Operation end ---
--- hppwsHeader Element --
<complexType name="hppwsHeaderElement">
<sequence>
<element maxOccurs="1" minOccurs="0" name="version" type="tns1:version"/>
<element maxOccurs="1" minOccurs="0" name="tx-id" type="tns1:tx-id"/>
<element maxOccurs="1" minOccurs="1" name="systemLangCode" type="xsd:string"/>
</sequence>
</complexType>
--- LoginRequest Element ---
<xs:element name="loginRequestElement" type="s0:loginRequestType"/>
<xs:complexType name="loginRequestType">
<xs:sequence>
<xs:element name="userId" minOccurs="1" maxOccurs="1" type="xs:string"/>
<xs:element name="password" minOccurs="1" maxOccurs="1" type="xs:string"/>
</xs:sequence>
</xs:complexType>
--- LoginResponse Element ---
<xs:element name="loginResponseElement" type="s0:loginResultType"/>
<xs:complexType name="loginResultType">
<xs:sequence>
<xs:element name="sessionToken" minOccurs="1" maxOccurs="1" type="xs:string"/>
</xs:sequence>
</xs:complexType>
In Oracle Workshop for WebLogic when I create a split-join .flow file while adding the invoke service call to login operation I am prompted to create the loginRequest and loginResponse variables. I can assign the appropriate expression to loginRequest.loginRequestElement prior to making the invoke call but then the backend business call fails because "systemLangCode" is not defined and set. Actual fault is
<ns1:genericFault xmlns:ns1="http://hppcbl.globalops.company.com/webservice">
<systemLangCode>en</systemLangCode>
<fault>
<ruleNumber>589</ruleNumber>
<fieldName>systemLangCode</fieldName>
<code>field.empty</code>
<desc>System language code is required.</desc>
<ftype>2</ftype>
</fault>
</ns1:genericFault>
I would really appreciate if someone could guide me on how to resolve this
Regards,
-Nilay

There is this $header variable which you should populate before calling the BS. What is the type of BS? If it is WSDL BS , Any Soap BS then above solution will work. I assume that yours is WSDL based BS and setting $header should resolve this issue.
AnyXML and Messaging type BS services requires that you create proper pay load (setting $header will not work).
There is also other actions Set Transport Headers {outbound request/inbound response} which can be used to set transport related headers but not soap headers.
Manoj

Grab in split-join

I have a grab activity which is set to from all to all. The process has a split-join. The user cannot grab an activity which is in a branch of split-join to outside the split-join or grab an acitivity which is outside the split-join into one branch of split-join. If I want to grab an activity of a branch to outside split-join, I can abort all activities in all branches and the process goes to join. Or I can grab all acitivities in all branches to the final activity before join and execute them to join. Is there any other method to grab from activity which is inside split-join to outside the gateway?

Hi,
Thanks for your reply. I create a new grab activity and set it to grab from all to all.
In a new instance, if the process is inside the split-join, the new grab activity is the same as the first one. It is shows that the instance in a branch can be grabbed within the split-join.
If the instance is outside the split-join, the grab activity cannot grab the instance to the branch.
For example, the split-join has 2 branches. Each has 3 activities, named as
branch 1: a1, a2, a3;
branch 2: b1, b2, b3.
Before the split, there are 2 activities named as c1, c2. After the join, 2 activities named c3, c4.
C1 cannot be grabbed to b2. b2 cannot be grabbed to c4.

Dynamic Split Join:Parallel flow using OSB

Hi,
I am implementing a dynamic split join in OSB,where in the for -loop i am invoking a database adapter.
If I select parallel='yes' in the for-loop settings, I get a random number of records from the database as an output.
While on the other hand, on running the for-loop sequentially, i get the exact number of records i am expecting.
Could anybody figure out why is this happening?
Regards,
Tarun

If I understand correctly, this is what you are doing:
Configure a For loop based on a repeating element in source XML (for ex. for each customer id in xml message).
Inside each loop you are making a DB lookup and getting one record for each element (for ex. customer details of each customer id)
Finally you are aggregating them in the same variable (join)
The problem that you see is that if you do it in parallel then you do not see details of all customers in the out variable?
If yes, then can you please let me know how you are updating the details of each record in the out variable.

Error in Split-Join when invoke similliar B.Service with same namespace

Hi Guys,
I having a split-join that doing parallel spliting call out to business service. And i encounter this error.
Severity and Description Path Resource Location Creation Time Id
Error compiling the Schema Type System: error: sch-props-correct.2: Duplicate global type: GetabcParam@http://www.xx.xx.abc (Original global type found in file: null) SplitJoin.flow line 1 1265267604208 5245
Can I know is this a limitation of the OSB or is a Bug? Or there is a more better way to implement this?
Edited by: kpchong on Feb 4, 2010 7:51 AM

I'm not sure if this is a known limitation or a bug. I faced this issue once, but needed quick fix so I didn't contact Oracle support at all.
I remember that the problem emerged in case I had a SplitJoin with Parallel action and both branches used WSDL-based business services whose WSDL files imported the same (shared) XSD file. As I wrote before I needed quick fix, so I ended with re-adjusted namespaces just to overcome this issue. Ugly but effective.

Aggregating output of two BS in OSB Split join

Hi,
i am using split join to invoke two BS and after the each invoke activity in parallel branch i have placed assign activity and assigning output variable of in voke to reply activity output variable response.parameter . However in o/p i am getting response of only one BS. can any one help on how to aggregating output of two BS in OSB Split join . my output is coming like this
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Body>
<ns2:NewOperationResponse xmlns:ns2="http://www.example.org/SjWsdl/">output</ns2:NewOperationResponse> -------->this is o/p of one BS. But i want to display O/p of two BS
</soap-env:Body>
</soap-env:Envelope>
thanks in advance..
Edited by: 11207106008 on Jun 26, 2012 10:11 PM
Edited by: 11207106008 on Jun 26, 2012 10:12 PM
Edited by: 11207106008 on Jun 26, 2012 10:13 PM

Suppose you saves the response of each BS in variables: $response1 and $response2
then you need to configure the replace action after the parallel branch like this:
Replace node content of . in variable <variable name of reply variable> with <Expression>
Where you can provide in <Expression> a simple XQuery expression to combine the two variable contents. (Choose a root node of your choice, I have used AggregatedResponse)
<AggregatedResponse>
{$response1, $response2}
</AggregatedResponse>

Oracle Service Bus 10.3 - Invoke a REST service in split join flow

Hi
I am using WebLogic Workshop to design a split-join service that needs to call 2 services and combine their responses.
Service A - WSDL based service
Service B - REST service
In the split join flow I am able to invoke Service A just fine. However I do not have a way to call Service B. When I open the invoke dialog it only list WSDL based services.
Does this mean in a split join I can only invoke WSDL based services or is this a bug in Weblogic Workshop.
I can get around this by creating a WSDL based proxy that calls the REST service but was hoping I do not have to go down this route.
Any guidance is appreciated.
Thanks,
-Nilay

I think that Split-Joins are implemented in BPEL. Just look at your .flow file and you will see all those BPEL directives. That's why you probably need your service to be described by WSDL, so you are probably on the right way.
http://technology.amis.nl/blog/1273/invoking-http-services-from-oracle-bpel-pm-soa-enabling-php-servlets-rss

OSB Split Join Repeat Until Question On XPath Condition

I'm trying to use OSB File Transport to stream a very large XML document file into a service which will split the file into very many small XML documents. So, given a file like:
<BookStore>
<Book></Book>
<Book></Book>
... (many more books)
</BookStore>
In the split join I want to use a 'repeat until' to process each Book until there are no more Books in the BookStore. Here's my question: What is the correct XPath expression to use as the Repeat Until terminating condition? (I'm an XPath novice.)
Thanks for your help!!!

Hi,
Based on what I understood, you should be using a for each loop with the conditions as follows:
Within the Split Join flow
for each ( counter variable from 1 to Count (xpath of book) ) --> For my example it was count($request.parameter/sjpoc:Orders/sjpoc:Order) replace this with your xpath.
- do your logic
Snapshot just in case @ http://dl.dropbox.com/u/19901533/sj_foreach_snapshot.JPG
Based on this the split and join would happen for n (based on count) number of Book tags.
Let me know if my understanding is incorrect.
Thanks,
Patrick

ALSB 3.0- SPLIT-JOIN

Similar Messages

Maybe you are looking for