Also having odd problems with AppleTV since iTunes8

I'm also having problems since the upgrade to iTunes8, but mine seem to be different than others recounted, so I'm adding a new post.
I purchased the recent Stargate and watched a few minutes, but stopped. When I went back to watch the rest, it and other already watched Stargate shows weren't accessible. When I connected iTunes, the new Stargate synced, and the older shows still showed, in the AppleTV list. Oddly enough, they also showed on the AppleTV.
However, when I closed iTunes, the shows no longer showed on AppleTV.
I have plenty of space, so that's not a problem. And the shows aren't removed from AppleTV. However, they're only showing up on AppleTV when iTunes is up and running.
I'm thinking that the syncing process between iTunes and AppleTV has been altered. Unfortunately, not without bugs. At least, I'm assuming the interface has changed--there's been nothing official from Apple.
Message was edited by: Burningbird

Let me see if I can explain it more clearly for you.
I had a new TV show. I watched five minutes of it. Left. Came back. Went to watch it and it no longer showed in AppleTV. Now, this show isn't supposed to disappear when half watched.
This is all new behavior with iTunes8. In addition, with pre-iTunes 8 behavior, shows wouldn't be pulled from the AppleTV unless deleted from the iTunes, or running out of room.
So, no, iTunes 8.0 is definitely impacting on AppleTV, but not necessarily in a positive manner. In particular, the removing the TV show when it hadn't been completely watched was definitely not wanted behavior.

Similar Messages

Ever since updating I am unable to attach pictures to emails. I fist noticed in Facebook, but also having the problem with Yahoo, etc

When I updated I can no longer attach photos to emails. I first noticed in Facebook but also in Yahoo, AOL, etc

When I updated I can no longer attach photos to emails. I first noticed in Facebook but also in Yahoo, AOL, etc

Problem with AppleTV since update !!

Hi. Ever since I did the recent update to my iPad 4 and my iPhone 5 I do not get the airplay icon anymore to synch to my appletv. I have to turn everything off to get it back and now it is gone again. Anyone else having problems ???

Welcome to the Apple Community.
Try restarting the Apple TV, mobile devices and your router.

I cannot open hotmail. I am also having similar problems with facebook. What can I do to access these websites again? Thank you.

When I go to www.hotmail.com the address tab seems to think it's on the log-in page, but the page itself is blank.
With facebook I can log-in, but get only text on the page that opens.
I had this problem before and it was resolved by clearing the cache and deleting all cookies. I have cleared my cache, browsing history, and cookies. I have also followed all eight steps on the Basic Troubleshooting page, all to no avail.
I would greatly appreciate any help you can provide. Thank you.

I have already done all this as part of 'Basic Troubleshooting' (http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_3-update-your-plugins)
The "Basic Troubleshooting' steps I have followed are:
1. Restart your computer
2. Clear your cookies and cache
3. Update your plugins
4. Restart Firefox in Safe Mode
5. Troubleshoot your plugins
6. Reset your Firefox settings
7. Reinstall Firefox
8. Make a new profile
and I still can't access hotmail!

I'm having a problem with zoom since mavericks? Any suggestions?

Ever since I updated to the new Maverick I have lost my settings for zooming so every time I go to a new window my font size goes back to an original setting. Does anyone know how I can fix this. I'm getting older and it is so frustrating that I can't see as well.

I won't swap to Chrome, but lot of people just might will, and this is pissing me off... Really, the reason not to allow having tabs on bottom is very stupid. And there is nothing in the addons...

Anyone else noticing problems with AppleTV since the OS X update version 10.9.5?

I installed this update on September 26, 2014 along with Safari version 7.1. Since then I have trouble downloading content from Netflix and/or get an error saying Apple can't contact the server, and/or poor quality video. What can I do?

Hey jenfromearth,
Thanks for the question. Let’s give the troubleshooting steps in this resource a go, including resetting the SMC:
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/ht2801
Thanks,
Matt M.

I am having email problems with the new Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help

I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. Thanks

Apple - Support - Mail Setup Assistant

Hello , please am having a problem with my iphone 5 , the battery runs out quickly , also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out , and my final problem is that is "no service " appears a lot can you help ?

Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?

Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support

Anyone else having problems with popups since the new security upgrade? can't get rid of them

anyone else having problems with popups since the new security upgrade? can't get rid of them

You may have inadvertently installed adware. You do not need to download or install anything to fix it. It ought not to be related to any Apple security update.
For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

Having problem with appletv iTunes Radio. Music stops, get spinning wheel, never restarts.

Having problem with appletv iTunes Radio. Music stops, get spinning wheel, never restarts. If I switch to another station it plays immediately, but it too sometimes stops for the same reason. Wait for 10 minutes for it to restart, then switch stations again. I've tested my download speed when it happens it's fine.

What was the connection speed when you tested
Make sure DNS is set to automatic
Reboot ATV and router
If on wifi try ethernet

Anyone else haveing a problem with appointments not syncing, duplicate appointments when syncing with Outlook? Also, noticed that my primary SMTP disappeared, and I had to re-establish to send e-mail. Apple tech support was worthless.

Anyone else haveing a problem with appointments not syncing, duplicate appointments when syncing with Outlook? Noticed the problem a couple of days ago.
Also, noticed that my primary SMTP disappeared, and I had to re-establish to send e-mail.
Apple tech support was worthless on both issues.

Hi I am also in the UK, but not with Tiscali and am having the exact same problems. I can also send with wifi, but not 3G. I have tried amending all sorts of settings, including those above and amending the smtp server to the settings for my provider, but all to no avail.
It is thoroughly frustrating, as I cannot send emails unless I have wifi access.
Any further suggestions would be very welcome.

Having a problem with itunes. Just downloaded the lastest itunes update. However, it won't open because it keeps trying to download to a driver (k:) which I don't have. Since my phone iOS is updated and can't connect to itunes anymore. How do I fix this?

Having a problem with itunes update. Download wants to update to a driver (k:) which my computer doesn't have. As a result the download does not go through.

Try the following user tip:
"Invalid drive X:\" install errors

I am having a problem with pop pups and small windows with ads constantly opening up on my safari?? Thought that macs didn't get virus? this looks like one- any experts around? please help me fix it with your instructions? really don't know what to do...

Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanks

Those are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Having multiple problems with script - NTFS Permissions and AD Groups

Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!

I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though.

Anyone having a problem with google?

Having a problem using google for last 3 days..search,mail etc.Is there a problem with the website?

Also having this problem, ever since I downloaded the latest updates (around 3 days ago)
I did what other discussions suggested (entering DNS numbers ) and it helped a little to load google but thats it- Since Mavericks os x came out- nothing but problems each time!
If Apple is not completely sure that the operating system works perfectly (like it was in the past os) then DONT RELEASE IT!

Also having odd problems with AppleTV since iTunes8

Similar Messages

Maybe you are looking for