Also I need ndiswrapper support for solaris 10

I have a linksys -G type router and my computer uses a Linksys Wireless-G PCI Adapter with SpeedBooster
which works in Linux like mandrake , debian systems like knoppix and kanotix but their are some buggy like debian also that don't let me change the essid in debian but most linux works with the drivers for my card which are
04/13/2004 10:01 AM 7,870 BCM43XX.CAT
03/31/2004 08:44 AM 11,960 BCMWL5.INF
02/19/2004 11:51 AM 300,928 BCMWL5.SYS
normally you install the drivers with ndiswrapper -i BCMWL5.INF then use -m to add it too the model loader program in linux which adds wlan0 to ifconfig and iwconfig programs
which also ndiswrapper requires the source code of the kernel to install the ndiswrapper right , it req. it too compile the drivers, and using the linux gui programs to setup essid and key wep info
also I use a script in kanotix to use /etc/network/interfaces to load the info on bootup etc.. to get my wireless network card up in linux.
also how the support for soundblaster sound cards in solaris 10, I have not fingured out if theirs sound yet. freebsd 5.4 seemed to be missing the sound support
one more thing in bootup of the install program for Solaris 10 my geforce 6800 card detected right but my tv output was all wrong in since the picture , was only on the monitor and tv had stange graphics on it which did not look right I hope nvidia drivers fix this problem , Is their any different command needed for clone mode in Solaris 10 then free86 nd xorg scripts use?

I got the solutiion from Canon Customer Serivce, temporary until the 10.10 download is released.  It works:
"You can download the latest software updates at this address:
http://www.usa.canon.com/cusa/support/professional/professional_cameras/eos_digital_slr_cameras/eos_...
Please select "OS X Mavericks v10.9" using the drop-down menu on the page.  You have to pick the previous version of Mac OS, because the options for OS X 10.10 Yosemite have not yet been populated.  I sincerely apologize for any confusion this may cause.  After selecting OS X 10.9, please click on the red triangle next to the word "Software" to see the software updates available for your computer.  I would recommend updating all of your software including EOS Utility and Digital Photo Professional."
I never did find the drop-down menu, but I went into the site map and found what I needed.
Barry

Similar Messages

  • HBA support for solaris 10

    Hi All
    I need to know which HBA card will support solaris 10.we have sunfire 1280 server, brocade silkworm 12000 and hitachi 9980
    Regards
    RPS

    I would beg to differ on this response. This is not a service call and the storage vendor is not responsible for making decisions on what the customer is allowed or not allowed to use.
    EG, I have a Sun StorEdge 9990 (actually a HDS USP 1100 and not the 9990 Lightning series which is on the web site) and I made the call to put the Fibre Channel HBA's of my choice into my systems and I also chose the Cisco 9509 switches. Both HDS and Cisco put out documentation regarding compatibility of the HBA's.
    So, I would suggest RPS check out the Brocade website or sales people and ask them if they recommend anything.
    http://www.brocade.com/products/pdf/Fabric_Aware_Compatibility_Matrix-060521.pdf
    states that the option X6768A is supported for Solaris 10.
    Sun 9980 will work on most of the HBA's available in the system handbook.
    The could be either the rebadged Qlobic or JNI HBA's. You could even use Emulux if you are that way inclined.
    My systems are full of dual channel HBA's such as SG-XPCI2FC-QF2.
    You should also be aware that the 1280 has only one 66 MHz PCI slot. You can upgrade the I/O boat to all 66 MHz slots if you are after good throughput. The upgrade will also give the opportunity to use the 4 Gb HBA if you can find a system to use them on.
    Stephen

  • OpenSSH 4.4p1 packages with PAM support for Solaris 9, 10

    As mentioned in a previous post* , I've compiled OpenSSH packages with PAM support for Solaris 9 and 10. They've since been updated to version 4.4p1, and are compiled against a static zlib (1.2.3) and OpenSSL (0.9.8c). You can find them here:
    http://firewallworks.com/downloads/unsupported/Solaris-sparc/
    Regards,
    Greg
    * http://forum.sun.com/jive/thread.jspa?threadID=103378&tstart=105

    Yes, zlib 1.2.3 is a requirement. In facts, zlib mentions a 2005 vulnerability fix but I found no matching patch in sunsolve. See
    http://www.kb.cert.org/vuls/id/JGEI-6E7RC3
    I have been wandering whether to replace the official zlib. Linking statically is probably a better idea. Thanks

  • HT6154 need tech support for my iPhone 4 s

    Need technical support for my iPhone 4s, just have a couple questions if you don't mind helping me.

    Then ask your questions. This is not a real time chat service. It's a discussion forum.

  • Need coding support for Accessing MYSQL stored procedure from java

    Hi every one,
    I need coding support for accessing Mysql stored procedure from java and JSP.
    Please help me
    pranav

    You'd better have a recent version of MySQL, because earlier ones didn't support stored procs.
    If your MySQL and driver support stored procs, maybe you just need a JDBC stored proc tutorial.
    %

  • Sun Cluster 3.1 64 bit support  for Solaris 10

    Hi:
    I have some questions when migrate SC 3.1 from solaris 9 to solaris 10.
    1) Does Clutster 3.1 for solaris 10 support 64 bit?
    I have develop own resource type which is compiled with 64 bit mode, while cluster admin program is 32 bit based. E.g. /usr/cluster/bin/scrgadm
    Will that cause any problem? For instance: 32 bit lib and 64 bit lib have the same name libscha.so will be loaded by 32 bit scrgadm and 64 bit my own developped resource type program.
    2) Can I download a Cluster 3.1 install-pkg for solaris 10, 64 bit supported., which means all admin files like scrgadm are 64 bit based.
    Or only ONE Cluster 3.1 version for solaris 10 is deliveried by SUN?
    Thanks in advance!
    BRs
    //rdctahu

    Hi,
    Comments on your 2 questions:
    1) Yes. IIRC, SC31 for S10 actually supports ONLY 64 bit. To be clear, this means
    Solaris has to be booted in 64 bit mode, but 32 bit applications would run just
    fine.
    As for your RT being 64 bit, and scrgadm being 32 bit, no problem.
    2) See (1). You are good.
    Go for it.
    HTH,
    -ashu

  • Need Agent Installer for Solaris (SPARC)

    Hi All,
    I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
    When I tried to extract the zip file, I am getting the following error message.
    "Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
    Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
    Please send me the location if you have,
    Thanks
    Sumathi

    Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
    The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
    So you can't get as close as you may want, but I'll bet it would still be helpful.
    Darren

  • Out of the box support for Solaris 10???

    I'm curious to what video and network cards are supported out of the box for Solaris 10? I have already viewed the HCL, but the list doesn't really give a straight answer.

    I'm curious to what video and network cards are supported out of the box for Solaris 10? I have already viewed the HCL, but the list doesn't really give a straight answer.

  • I need Id apple free i dont have a vise please i need your support for this issue

    Dears
    please i need your support to get a new apple ID for my account
    and my country is lebanon i receive only by visa
    best regards
    <E-mail Edited by Host>

    All iTunes accounts are free to create, there are instructions on this page for how to create one (any content that you downloaded via your current account will remain tied to that account) : http://support.apple.com/kb/HT2731
    If you want to create one without giving credit card details (if your visa card is a debit card then I don't think that it will be accepted) then follow the instructions on this page for creating it : http://support.apple.com/kb/HT2534

  • Need font support for MS Pゴシック  in pages, numbers and keynote

    I am moving to Japan and I need ＭＳ Ｐゴシック  font support in all my iwork documents. How do I find/slash install ＭＳ Ｐゴシック  for OSX?

    Hi Tom
    it was my first idea but I opened the folder storing the Office fonts and didn't found this one.
    Is it one of the group :
    MS Gothic.ttf
    MS Mincho.ttf
    MS PGothic.ttf
    MS PMincho.ttf
    Yvan KOENIG (VALLAURIS, France) lundi 20 juin 2011 22:50:33
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Sapjco support for Solaris 10 x86 and more...

    Hi,
    Does SAP offer a SAPJCO version that supports:
    1-Solaris 10 using a x86 64-bit CPU?
    2-Solaris 10 using a SPARC 64-bit CPU?
    3-Linux 64-bit?
    4-MsWindows 2003 64-bit?
    PS: I am asking does questions, because I don't seem to have access to the SAPJCO download page.
    Best regards.

    Hi
       Could you please refer this similar [Thread|https://websmp209.sap-ag.de/connectors] .
    Regards,
    S.Manu

  • Needed Raw-Support for new Samsung SLRs like NX1000

    Hopefully Apple is updating his support for these new cameras (they are still a few month on the market).

    You better tell Apple directly: Apple - Aperture - Feedback
    Here Apple probably will not hear you.

  • Support for Solaris 8 and 9

    I need a method of automatically installing patches from a local patch server ... for security reasons, we have no internet connectivity (absolutely no physical connection).
    Sun Patch Manager 2 seemed the perfect solution ... but have just found it is to be eol'd.
    Is SUC now working for 8 and 9? And if so what is the equivalent of the "Local Patch Server" functionality available on SPM 2.0?
    Many thanks
    Andy

    Sun Update Connection will be being backported to Sol 8 and 9 to replace SPM but is not yet available.
    There is also Update Connection Enterprise Edition (UCE) which will be released shortly which covers Solaris 8-10. This will be a subscription based service and is a rebranding of Aduva's Onstage product following their recent acquisition. For more information on this visit aduva.com or request contact from the following link -
    http://www.sun.com/service/sunupdate/aduva.xml

  • Java and Oracle support for Solaris 10?

    Hi
    Does anybody know when Oracle plans to support Solaris 10?
    We plan to purchase a Opteron server and would like to use Oracle.
    We also plan to use Sun Java AppServer Platform Edition. Any idea when that will support Solaris 10?
    Am I correct in assuming that Solaris x86 will run fine on an Opteron system.
    thanks in advance

    Oracle support Solaris 10 x86 but I doubt it's native 64 bits. The App. server is supported just go to Sun's site. The short answer is that Oracle and the App. server should both work but not necessarily in 64 bit mode.
    As for the Opteron system, you should check the HCL.

  • Need GNU tools for Solaris 10

    Hope this is the right group.
    I have to port our software for X11-Recording to Solaris 10/ix86.
    Therefor I need some binary, which i cannot find on the system nor on sunfreeware. Please help.
    Cannot find system binary md5sum
    Cannot find system binary mwm
    Cannot find system binary xwdtopnm
    Cannot find system binary pnmtopng
    Cannot find system binary pnmscal
    TX in Advance

    GCC 4.x is only available with Solaris 11.
    Non-Oracle GCC 4 packages are available for example on the below websites :
    - OpenCSW
    - SunFreeware
    - thewrittenword.com
    But, you can also try to build it : https://blogs.oracle.com/timc/entry/building_gcc_4_x_on

Maybe you are looking for

  • I can't download any music or transfer at all is

    When I download from iTunes it just says download error, tap to retry. But it still doesn't work, none of my music from iPhone will transfer either. Although no music will download I did download a book from iTunes the other day.

  • What are the settings for iPhone, iPad and iMac to sync ical and contacts?

    How can I get all three items to sync? What are the settings on the iMac with Lion on board? I put all my stuff on iphone but iMac & iPad do not have the items synced even though I have everything on icloud?

  • Can't set monitor resolution to 1900x1200

    I have an HG281D monitor (hanns-g) with native resolution 1900x1200. Mac OS won't let me set the resolution higher than 1900x1080. How can I fix this? The display is clearly stretched vertically in its current configuration. Thanks, Adam

  • Contribute CS4 hides repeat question buttons

    Hi all, when upgrading to Contribute CS4, our internal client cannot see the buttons ,it is there on screen, but somehow hidden underneath the another div, the above image was taken using CS3, in CS4 its completely hidden behind the div. does anyone

  • Oracle 9i restore to point in time

    We are performing everyday full backups (plus archivelogs) using rman on our Oracle9i RAC database (in archivelog mode). The backup takes around 3 hours to complete. After we start the backup we wait for about 1 hour and then start transacting on the