Also Problems with Serial in PSE12 - Mac

I have also the Problem in PSE12 with the serial. It say, that it is not valid.
System: OSX 10.8.5, MacBookPro
Adobe is becoming a real annoyance!!!!!!!!!!!!!

We've been working on this and it should be resolved by now.
The hope at this point is that the serial numbers you ALREAY have will work after we changed some things on our end, and the changes were propogated to the servers.
This was potentially to be fixed by noon PST today, but we already have reports of users having success with their serial numbers now.
I'd recommend trying to Help > Sign In and see if the serial number is accepted for you guys.
Let me know how it goes,
Regards
Pete

Similar Messages

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Strange problem with color measure in Mac.

Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
Thank you for your time
Marcelo.

Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
is there any way to make the OS X color measure tool to measure the original color values
You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

Problem with photoshop on my mac

Hey...
I have some problem with photoshop on my mac...
When i open the photoshop my screen change his color...
The screen changes such delicate blue color.
and when i close the app the color has back to the original color.
photoshop cs 6 (master collection)
macbook pro 15"
OS X Mountain Lion
2.3 i7
4 giga ram
Have a nice day

Not sure which screen you mean, but maybe your seeing the Application Frame in photoshop cs6.
You can turn that off in photoshop cs6 under Window>Application Frame.
If that's not it, could you post a screenshot?

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Problem with *serial no. profile* in work sheduling view of material master

Hi ! !
I am here with a problem with serial no. profile in work sheduling view of material master.
By mistake for some FHMI type ( PRODUCTION RESOURCE TOOLS )materials, serial no profile exist in 'work sheduling' view. Due to that we are facing problem in GRN.
when I am trying to remove that with MM02. i m getting a message as Serial numbers already assigned to this material
Please suggest how to remove serial no. profile.
Thanks in advance,
Prab

Hi,
go to MMBE and check the Current Serial number...for FHMI type
and go to IQ02 and close the Serial number range at the Current number range...
Now you can assign this serial number range to another material type...
Thx
Raju

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

Applications should not disappear all by themselves.
If they are then that coud indicate serious problems with your hard drive.
Backup everything up as quickly as possible.
Using Disk Utility verify your system disk.
Allan

Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?

Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?

Have you attempted an iTunes restore and setting up as a new device? Sometimes battery life issues can be caused by corrupted iOS software.
- Greg

Problem with Quadro4000 in a Mac Pro (Mid 2009)

Does anyone has a problem with the Nvidia Quadro 4000 on his Mac Pro?

I have a major problem, it can't boot to start up the computer, I must to hold the shift button to open and when it opens it sticks and the colors of the wallpaper is not good. Also I have a raid card. The apple service told me that the problem is the graphic card and must be replaced but I am not sure about it, unfortunately I don't have the first card to be sure.
Do you know what the follow message means?
Interval Since Last Panic Report: 3378 sec
Panics Since Last Report:          2
Anonymous UUID:                    109D6AB4-796F-DAB1-788B-3CEBA562D0BE
Thu Sep 19 19:20:19 2013
panic(cpu 0 caller 0xffffff8019ab8945): Kernel trap at 0xffffff7f9b214d66, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x000000000000008c, CR3: 0x000000000e72a000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000000006, RCX: 0x0000000000000005, RDX: 0x0000000000003c00
RSP: 0xffffff81eb423280, RBP: 0xffffff81eb423280, RSI: 0x0000000000000005, RDI: 0xffffff803a7d1400
R8: 0x0000000000000000, R9: 0xffffff803d4facb8, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0x0000000000000004, R13: 0xffffff81ba18f000, R14: 0xffffff81ba1a2938, R15: 0xffffff803a7d1400
RFL: 0x0000000000010206, RIP: 0xffffff7f9b214d66, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000008c, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb422f20 : 0xffffff8019a1d636
0xffffff81eb422f90 : 0xffffff8019ab8945
0xffffff81eb423160 : 0xffffff8019acebfd
0xffffff81eb423180 : 0xffffff7f9b214d66
0xffffff81eb423280 : 0xffffff7f9b1f6cec
0xffffff81eb4232d0 : 0xffffff7f9b2252ff
0xffffff81eb423700 : 0xffffff7f9b1d5c80
0xffffff81eb423730 : 0xffffff7f9b2291dd
0xffffff81eb4237b0 : 0xffffff7f9b210460
0xffffff81eb423810 : 0xffffff7f9b210d41
0xffffff81eb423860 : 0xffffff7f9b211294
0xffffff81eb4238d0 : 0xffffff7f9b211a53
0xffffff81eb423910 : 0xffffff7f9b1dcedf
0xffffff81eb423a90 : 0xffffff7f9b20df8f
0xffffff81eb423b50 : 0xffffff7f9b1db978
0xffffff81eb423ba0 : 0xffffff8019e6f789
0xffffff81eb423bc0 : 0xffffff8019e70d30
0xffffff81eb423c20 : 0xffffff8019e6e74f
0xffffff81eb423d70 : 0xffffff8019a98c21
0xffffff81eb423e80 : 0xffffff8019a20b4d
0xffffff81eb423eb0 : 0xffffff8019a10448
0xffffff81eb423f00 : 0xffffff8019a1961b
0xffffff81eb423f70 : 0xffffff8019aa6546
0xffffff81eb423fb0 : 0xffffff8019acf473
     Kernel Extensions in backtrace:
        com.apple.GeForce(8.1.6)[0E3D8776-A5B7-3D82-9BFD-9188170B358D]@0xffffff7f9b1c90 00->0xffffff7f9b296fff
           dependency: com.apple.NVDAResman(8.1.6)[EA4F9902-5AAE-3F1D-A846-3796221C8C91]@0xffffff7f9a1 79000
           dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f9a165000
           dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f9a0df000
           dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f9a122000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12F37
Kernel version:
Darwin Kernel Version 12.5.0: Mon Jul 29 16:33:49 PDT 2013; root:xnu-2050.48.11~1/RELEASE_X86_64
Kernel UUID: B1B58405-A2B2-3C44-B25D-495053D52AB5
Kernel slide:     0x0000000019800000
Kernel text base: 0xffffff8019a00000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 213721035844
last loaded kext at 35243841547: com.apple.driver.AppleBluetoothHIDKeyboard     170.2.4 (addr 0xffffff7f9b9f9000, size 24576)
last unloaded kext at 96410920956: com.apple.driver.AppleUSBXHCI     630.4.5 (addr 0xffffff7f9aa9b000, size 118784)
loaded kexts:
com.nvidia.CUDA     1.1.0
com.vmware.kext.vmnet     3.0.0
com.vmware.kext.vmioplug     3.0.0
com.vmware.kext.vmci     3.0.0
com.vmware.kext.vmx86     3.0.0
com.apple.driver.AppleBluetoothMultitouch     75.19
com.apple.driver.AppleHWSensor     1.9.5d0
com.apple.iokit.IOBluetoothSerialManager     4.1.7f2
com.apple.driver.AudioAUUC     1.60
com.apple.driver.AppleTyMCEDriver     1.0.2d2
com.apple.driver.AGPM     100.13.12
com.apple.iokit.IOUserEthernet     1.0.0d1
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.filesystems.autofs     3.0
com.apple.driver.AppleMikeyHIDDriver     124
com.apple.driver.AppleHDA     2.4.7fc2
com.apple.driver.AppleUpstreamUserClient     3.5.12
com.apple.driver.AppleMCCSControl     1.1.11
com.apple.GeForce     8.1.6
com.apple.driver.AppleMikeyDriver     2.4.7fc2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport     4.1.7f2
com.apple.driver.AppleLPC     1.6.3
com.apple.driver.AppleSMBusPCI     1.0.11d1
com.apple.driver.ApplePolicyControl     3.4.5
com.apple.driver.ACPI_SMC_PlatformPlugin     1.0.0
com.apple.driver.XsanFilter     404
com.apple.iokit.SCSITaskUserClient     3.5.6
com.apple.driver.AppleUSBHub     623.4.4
com.apple.driver.AppleFWOHCI     4.9.9
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
com.apple.BootCache     34
com.apple.driver.Intel82574L     2.3.0b5
com.apple.driver.AirPort.Brcm4331     615.20.17
com.apple.driver.AppleRAIDCard     304
com.apple.driver.AppleAHCIPort     2.6.6
com.apple.driver.AppleUSBEHCI     621.4.6
com.apple.driver.AppleUSBUHCI     621.4.0
com.apple.driver.AppleRTC     1.5
com.apple.driver.AppleHPET     1.8
com.apple.driver.AppleACPIButtons     1.8
com.apple.driver.AppleSMBIOS     1.9
com.apple.driver.AppleACPIEC     1.8
com.apple.driver.AppleAPIC     1.7
com.apple.driver.AppleIntelCPUPowerManagementClient     214.0.0
com.apple.nke.applicationfirewall     4.0.39
com.apple.security.quarantine     2.1
com.apple.driver.AppleIntelCPUPowerManagement     214.0.0
com.apple.driver.AppleBluetoothHIDKeyboard     170.2.4
com.apple.driver.AppleMultitouchDriver     237.4
com.apple.iokit.IOSerialFamily     10.0.6
com.apple.iokit.IOSurface     86.0.4
com.apple.kext.triggers     1.0
com.apple.driver.DspFuncLib     2.4.7fc2
com.apple.iokit.IOAudioFamily     1.9.2fc7
com.apple.kext.OSvKernDSPLib     1.12
com.apple.nvidia.gf100hal     8.1.6
com.apple.NVDAResman     8.1.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport     4.1.7f2
com.apple.driver.AppleSMBusController     1.0.11d1
com.apple.iokit.IOFireWireIP     2.2.5
com.apple.driver.AppleHDAController     2.4.7fc2
com.apple.iokit.IOHDAFamily     2.4.7fc2
com.apple.driver.AppleGraphicsControl     3.4.5
com.apple.iokit.IONDRVSupport     2.3.7
com.apple.iokit.IOGraphicsFamily     2.3.7
com.apple.driver.AppleSMC     3.1.5d4
com.apple.driver.IOPlatformPluginLegacy     1.0.0
com.apple.driver.IOPlatformPluginFamily     5.4.1d11
com.apple.driver.AppleUSBHIDMouse     175.8
com.apple.driver.AppleHIDMouse     175.8
com.apple.driver.AppleUSBHIDKeyboard     170.2.4
com.apple.driver.AppleHIDKeyboard     170.2.4
com.apple.driver.IOBluetoothHIDDriver     4.1.7f2
com.apple.iokit.IOBluetoothFamily     4.1.7f2
com.apple.iokit.IOUSBHIDDriver     623.4.0
com.apple.driver.AppleUSBMergeNub     621.4.6
com.apple.driver.AppleUSBComposite     621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.5.6
com.apple.iokit.IOBDStorageFamily     1.7
com.apple.iokit.IODVDStorageFamily     1.7.1
com.apple.iokit.IOCDStorageFamily     1.7.1
com.apple.iokit.IOAHCISerialATAPI     2.5.5
com.apple.iokit.IOFireWireFamily     4.5.5
com.apple.iokit.IOUSBUserClient     630.4.4
com.apple.iokit.IO80211Family     530.5
com.apple.iokit.IONetworkingFamily     3.0
com.apple.iokit.IOSCSIParallelFamily     2.5.1
com.apple.iokit.IOSCSIBlockCommandsDevice     3.5.6
com.apple.iokit.IOSCSIArchitectureModelFamily     3.5.6
com.apple.iokit.IOAHCIFamily     2.5.1
com.apple.iokit.IOUSBFamily     630.4.5
com.apple.driver.AppleEFINVRAM     2.0
com.apple.driver.AppleEFIRuntime     2.0
com.apple.iokit.IOHIDFamily     1.8.1
com.apple.iokit.IOSMBusFamily     1.1
com.apple.security.sandbox     220.3
com.apple.kext.AppleMatch     1.0.0d1
com.apple.security.TMSafetyNet     7
com.apple.driver.DiskImages     345
com.apple.iokit.IOStorageFamily     1.8
com.apple.driver.AppleKeyStore     28.21
com.apple.driver.AppleACPIPlatform     1.8
com.apple.iokit.IOPCIFamily     2.8
com.apple.iokit.IOACPIFamily     1.4
com.apple.kec.corecrypto     1.0
Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.93 GHz, 16 GB, SMC 1.39f5
Graphics: NVIDIA Quadro 4000, NVIDIA Quadro 4000, PCIe, 2048 MB
Memory Module: DIMM 1, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 2, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 3, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 4, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 5, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 6, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 7, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 8, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 5 incoming serial ports
Network Service: LINKSYS WAG320N, AirPort, en2
Network Service: Ethernet 2, Ethernet, en1
PCI Card: NVIDIA Quadro 4000, sppci_displaycontroller, Slot-1
PCI Card: NVIDIA Quadro 4000, NVDA,Parent, Slot-1
PCI Card: pci1033,194, Slot-3
PCI Card: Apple RAID Card, sppci_raid, Slot-4
Serial ATA Device: Optiarc DVD RW AD-7240S
Serial ATA Device: Optiarc DVD RW AD-7240S
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd500000 / 2
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd530000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd520000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 5
USB Device: Smart-UPS 2200 FW:654.19.I USB FW:7.4, 0x051d (American Power Conversion), 0x0002, 0x1d100000 / 2
USB Device: PTK-840, 0x056a (WACOM Co., Ltd.), 0x00ba, 0x3d100000 / 2
FireWire Device: built-in_hub, 800mbit_speed

VISA bug with serial communication on MAC !

Hello to you all again,
I have appreciated all feed back from you about a problem encountered with serial communication on the MAC (see earlier questions)
To situate the problem:
One can only read 63 bytes back from the serial port using VISA calls (without handshaking). With the old serial VIs you can read everything back. In addition the exact same VIs do not show this problem on windows platform.
I have now performed extensive tests with a loopback on the serial port and the problem still stand.
I attach two VIs to an answer to this question (for some obscure reason I can not attach them to the question?) which do the basic loopback, one uses VISA the other the old serial VIs. Please try them out o
n your computer (for Mac RS422 miniDIN you should connect pin 3 to 5 and 6 to 8 to do the loopback)(for windows RS232 DB9 connect pin 2 to 3) in loopback configuration (see also resource library).
Please post a message if the described problem also occurs on your MAC.
Thanks to all of you for your cooperation!!

here are the VIs a promised
Attachments:
serial_loopback_test.vi ‏65 KB
visa_loopback_test.vi ‏70 KB

Problems with Office 2011 for mac after upgrading to Mountain Lion

Office 2011 for mac worked fine with Lion on my MacBook Air. I had been having some problems with my computer freezing and crashing, so the folks at the Genius Bar wiped my computer clean and installed Mountain Lion for me.
I have full backups (Time Machine) from before the wipe on my external hard drive, but I was told not to restore from the backup, that I should drag and drop files instead. I was also told to re-install any program for which I had the disk. I reinstalled Office 2011 via the disk.
Two major problems followed:
1.     I lost all my old emails (I use Mail). Even rebuilding the library or trying to restore them from Time Machine don't get them back.
2.     Word and Excel don't seem to recognize me anymore. I can pull up and modify an old document or workbook, but I cannot "save" my changes. I have to hit "save as." That's a pain, but there's a worse problem.
I have no trouble saving these "save as" versions to my desktop or to my Documents file. But I cannot save them anywhere else — even to the folder where I found the original document. I get a message that I don't have the necessary permissions to access or modify the folders. I'm asked to authenticate, and I do, but that doesn't seem to do anything.
I tried Get Info on the workbooks and documents, and I'm clearly granted Read and Write permission.
I've done a permissions repair via Disk Utility. There were some things to repair, but it didn't solve my problem.
I know I can move all documents to an external hard drive and then recreate all the folders, saving all the documents and workbooks "as" but it seems a huge amount of work. Can anybody suggest an easier route or how to get my email history?

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: 'resetpassword' (without the 's) and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

Problem with serial Number in Inspection Lot

Dear All,
I have a typical problem that material is there in quality inspection lot and serial numbers are aslo assigned during 101 mvt. but when I am posting it to unrestricted stock system is not determine serial number and giving an error
*Stock data of serial number XXXXXX not suitable for movement
Message no. IO231*
All configuration setting are also OK as this problem comes for the first time and previously we were able to clear inspection lots of that material easily with serial number.
Any Idea to rectify that problem?
Thanks
Edited by: Ashu on Aug 9, 2010 5:54 PM

Hello,
Check with your serializing Procedure check the assignment in Work scheduling View for this material also check in Quality view
for inspection type 4 for GR of Production order.
Regards,
JayaVimal

A lot of problems with Lion Server in Mac Mini Server

I have a new Mac Mini Server and I have a lot of problems.
The server application works well for a day, then start to have problem, for example: I can not change the configuration of the share folder, I add a new user but he can not see some folders.
Then if I login the Mac Mini with another user, he can not see the starting folder and if you open a new folder you see a lot of strange documents.
Later, with administrator user, I can not login the server application, I put the user name and password but it refuses it (user name and passowrd are correct)
In the end I also can not login the computer.
I reinstalled the Lion Server 2 times but nothing change, after 2 days it doesn't work like before.
I'm very upset, this is the first time in more then 20 year I have a problem with an Apple computer.
What can I do?
Please help me
Thanks

Turribeach, Thanks for you time.
1. It was not a question
3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
4. I'm using OCI connection type
Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
Edited by: serzzzh on 03.09.2010 3:44

Problems with authenticated smtp on Mac mail 2

I do support for a small ISP and we are seeing problems with Mac Mail authenticating to the smtp server. The settings that should work are:
outgoing server: asmtp.gorge.net
Username: full email address
Outgoing server port: 2525 or 587
We typically turn on password for the authentication type. In some customers, nothing seems to work. They get an error that their email address can't authenticate. Any ideas on what settings might work for this?

Teri,
Reading the guidance for Outlook Express, I note:
"Step 11. On the Servers tab under Outgoing Mail Server, check the box titled My server requires authentication. Then go to the Advanced tab. Below select the option use same settings as incoming server. (emphasis added)"
In Mail, this is normally the same as specifying authentication of None, and not entering the Username or Password again for the Outgoing Server. This type of authentication, does not result in appending the Username entry (Username corresponds to Account Name in Outlook Express). Mail will authenticate to the SMTP with the Username and Password used for the Incoming, if prompted by the server, and the separate, hard, (and redundant) authentication resulting from using Password in the Outgoing Server entry boxes will cause a failure. However, this type of authentication (which is often called SMTP after POP3, or POP3 before SMTP) is normally conducted on Port 25. In my experience, the use of Port 587 is meant for those SMTP that must have a separate authentication, and where you will see the name altered to include the Username. Hopefully this will work with Port 2525, but I have not confirmed. SMTP after POP3 authentication does not help sending from remote providers, such as found in internet cafes, and this is why some ISPs provide a SMTP that does require separate, Password Authentication.
In the new Mail Setup Assistant, there is now the option to specify to use the same settings, but not enter the Username and Password -- this is not obvious, but well known by some ISPs, but not all -- this is really the same as changing to None in an existing account, and removing the Password and Username entries. Also, in Mail, I would NOT expect any default names to appear, unlike what your Mac Mail instructions imply.
Keep me posted.
Ernie

Also Problems with Serial in PSE12 - Mac

Similar Messages

Maybe you are looking for