Alt tax classification

Hi,
I have maintained TAX CLASSSIFICATION in customer master .Now this TAX CLSSIFICATION should be defaulted in sales order ALT TAX CLASSIFICATION .
can any one tell me how this can be done.
Presently only after maintainng ALT TAX CLASSIFICATION manually in the sales order header-Billing ; UTXJ condition appears in the pricing(Condition tab in sales order.)
Tax classification are maintained as follows in
1.Customer master- Coutry US -Tax classification=1 =Taxable
2.Material master - Coutry US -Tax classification=1 =Taxable
3.Plant -Country is MEXICO.
Pls. guide.
Regards

Hi
Please check Tax classification of yr ship to party if it is differe in what u have maintain in UTXJ then UTXJ will not be carry in SO. And as and when u put the Tax Class. in SO the utxj will follow in the SO.
>Please Check
>**** to party Tax classification.
Thx.

Similar Messages

Alternative tax classification

HI Guys,
can you please explain to me how the alt. tax classification in the order following
header data_billing document tab
i set automatically by sap? is there a combination of data between material and customer?
thanks
C.

As already expressed by others,
                  When the customer is created, there will be mutual agreement between the business & Customer.
According to the country where customer is located, Taxes will be applicable. As per country taxes may be differs such as
paricular sales,if purchased for specific reason which comes under tax exemption or part of the volume is tax exempted.
    This kind of sales have dynamic taxes.
Eg: Taxes for scrap sales are vary from state to state in country like INDIA which depends on respective government & policies introduced.
               Alt.Tax classification will give flexibility to maintain the tax classification, if it differes for certain sales.
Regards,
Reazuddin MD

TAX CLASSIFICATION (CREATION OF SALE ORDER)

Hello
When we are creating a sale order, we will select the tax classification code like VAT & CST. It Depends upon the consingee address.
My question, while selecting the tax classification code, I am able to see both types of codes(VAT & CST). I need to display only single type of codes, like if consignee is local, then only vat codes must be displayed and if consignee address is out of the state, only CST tax codes must be displayed.
how to do this one. should I take any ABAP help or directly we can set from functional side.
Thanks & Regards
Maheshwar Rao. G

Hi,
When we are creating a sale order, we will select the tax classification code like VAT & CST.
Do you mean you are manually changing/Selecting the tax classification in the sales order??? If yes, then you can maintain the same in the customer master--Biling tab(VAT or CST what ever is applicable) and system will pick the same autoamatically.
In sales order, SAP has given the flexibilty to change the tax classification, and based on the combination that is maintained in VK11, system will pick the condition record. As specified, table 368 gives the combination for maintaining the condition record.
Regards
Vamsi

Error with tax classification

Hello guru's,
I am facing a typical error. while creating sales order the VAT condition is capturing the tax classification indicator from sold to party. It has to be from ship to party. Pl. help.
Regards,

Hi,
The tax classification search is based on the Customer master data
For TAX determination, system will first search the Tax classification of the Payer master data
If Payer master Data is not maintained , then it will search for the Ship to Master data ,
If none of the Payer and Ship to were maintained , then it will search for the tax classification of sold to Master data
The Sequence for search is
PAYER
SHIP TO
SOLD TO
In your case, if the Tax classification for Payer and ship to not maintained then it will come to sold to
Please check if the Tax classification was maintained in the ship to or not
thanks
santosh

How to make tax classification field mandatory in sales order ?

Hi,
while creating sales order, " how to make tax classification field mandatory ".
Please tell me the procedure.
In tcode OVA2. what are the entries for fields,table.
Regards,
sapsduser

Dear ,
Could you please share why you want to make tax Classification field mandatory in sales order.
Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
Tax is calculated based on the ship to party.
Hope this will help you.....
Regards,
Manoranjan.

Change Tax Classification in Sales Order

Hi all,
I have a question about tax classification in sales order.
I know that taxable or non taxable is determined by a variety of key (by material, order type, departing country & destination country, etc).
I use Domestic Taxes as a key to determine taxable or nontaxable. To do that, I need to set up tax classification in customer master and material master, right?
Based on that combination, I can determine if it becomes taxable or nontaxable and if so by how many percentage.
OK.
Here is my scenario:
The customer and material I use to create sales order is set as taxable. So, when I create an sales order, the tax and its % is automatically presented in conditions.
But how do I do if I want to make only this sales order be nontaxable?
I changed Tax classification from '1' taxable to '0' nontaxable in Billing Document Tab at Item level, but tax is still there in Condition Tab.
I thought taxable or nontaxable can be changed by this way. Am I missing some procedure?
Regards,
Screen Field:VBAP-TAXM1

Hi,
When you set the tax condition to your country and set the tax rate in VK11 based on the customer tax classification and material tax classification, it should pickup in the document.
How can it posssible to have tax for one document and no tax for the other. Tax is uniform, and it will be applicabe to all customers (certain exceptions also there). In any case the customer is not taxable ot material is not taxable, maintain the customer / material tax classification as '0' and don't maintain any condition rate for that.
Prase

New field for tax classification (Pricing)

Hi
The scenario is - we need to map a taxes from R/3 to CRM. for this we cant use MWST , as this tax condition is already being used in the current process.
If we use another condition type then the tax classification for Material doesnt get picked in CRM. So according to the SAP note -336235, we have done the development.
+The developments includes + - new field created for material tax classification purpose and this field assigned to Pricing structure KOMP and KOMG. we have also maintained condition record by using this field , but the data is not being read by this field during the calculation of taxes in sales order (R/3).The data is exist in material master -Sales org1 tab -Tax classification (1 or 0).
Could anyone let me know, that how the tax classification data can be read from material master for this new customized field.
Thanks in advance.

To use a custom field in pricing, you need to do two things:
1. Add the field to KOMP and KOMG and
2. Move the appropriate value in a user-exit.
Your post says that you have done 1. above. Have you coded the user-exit for 2. above? The user-exits are in MV45AFZZ.

Wrong Tax Classification Taken from Material Master

Hi Experts,
I have a problem with Tax classification when determining the tax % at sales order entry. Below is the scenario:
1) There are two taxes applicable: Output Tax (15%) and Excise Duty (1%)
2) Customer 01 is liable for both Output Tax and Excise Duty
3) Material A is liable for Output Tax, but not liable for Excise Duty. In material master, the tax classification is maintained as "0" for Output Tax (the first line) and "1" for Excise Duty (the 2nd line)
4) Material B is the opposite, i.e. liable for Output Tax but not liable for Excise Duty. In material master, the tax classification is maintained as "1" for Output Tax (the first line) and "0" for Excise Duty (the 2nd line)
5) The tax codes are defined (with tax % maintained) in FTXP
6) Pricing condition records are also maintained.
Now the issue is during order creation with Customer 01 and material A, both Output Tax and Excise Duty are getting calculated as Zero. Where as in case of material B, both taxes are getting calculated with value (15% and 1% respectively).
It seems that the system is getting the tax classification from the first tax (output tax) in material master and apply it to the other tax (excise duty). Therefore the Excise Duty gets the wrong value if the tax classification is different from that of the Output Tax.
Have anyone come across this issue before? Your help is much appreciated.
Thanks.

HI ,
thanks for your reply. In the meantime I figured out the issue myself. It was due to the access sequence that only checks tax classification 1 instead of 2 , 3 etc.
Thanks for your reply.
Dominique

Uploading TAX Classification data in material master

Hi,
I have to upload tax classification data in material master for countries DE,IT,FR,ES,CH and GB.
I have used BAPI_MATERIAL_SAVEDATA and passing values to table TAXCLASSIFICATIONS.
But bapi is uploading tax classification only for country DE.
When I am creating through MM02 its getting updated.
Can anybody tell me what is the problem ?

Hi Ganga,
Yes I am passing different countries to table .
LOOP AT IT_STAX into WA_STAX.
       wa_taxclassifications-depcountry = wa_stax-aland.
        wa_taxclassifications-tax_type_1 = wa_tstl-tatyp.
        wa_taxclassifications-taxclass_1 = wa_stax-taxm1.
        wa_taxclassifications-tax_ind    = wa_stax-taxim.
        APPEND wa_taxclassifications TO it_taxclassifications.
ENDLOOP.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata           = wa_headdata
      TABLES
        taxclassifications = it_taxclassifications
        returnmessages     = it_return[].

Automatic creation of new tax classification

Hi
Help needed in understanding......
Automatic creation of tax classification in taxes in billing tab of customer master , after creation of a sales depot in a different country
thanks
Anil

Unless you use jurisdiction codes, and no external tax system, for
example with tax procedure TAXUSJ, there is no validity dates for the
condition records. You can see this differnce by comparing the tables
A003 without jurisdiction codes and A053 with jurisdiction codes. A053
contains the extra fields DATBI (key field) and DATAB. This is the
standard functionality.
Please have a look at the following part of note 418582:
" Changing past percentage rates has to be inhibited in order to avoid
database inconsistencies. For this reason, the functions which allow you
to transport time-dependent tax codes with percentage rates from the
past are not supported."

Need name of a function module or BAPI to update the Tax Classification val

Hi Guru's
Need name of a function module or BAPI to update the Tax Classification value for Material master.
Thanks in advance.

Hi
U can try to use BAPI_MATERIAL_SAVEREPLICA
Max

Customer Tax Classification : Missing entry screen in customer master

Hi All,
Anyone know if any customizing is required to activate the Customer Tax Classiification entry screen in the Customer Master of Sales Area (BillingT Tab)? I could not enter the customer tax classification as the entry screen doesn't appear in the customer master.

Hi,
You have to maintain few settings for this
In OVK1 Enter the TAX CATEGORY for the Country
In the OVK3 transaaction code enter the TAX CLASSIFICATION for the Tax category defined in OVK1
after this assignment try to create the customer master , in the Billing tab the tax classification will appear.
regards,
santosh

Material Tax Classification

Hi Gurus,
Need a little suggestion for a doubt -
I accidently changed Material Masters data of some items, after running a faulty LSMW
When I look at the change document for some of those articles it says -
Change Tax classification article 1 Ireland
So I believe it has changed the tax classification for this article ONLY for Ireland
when I reversed the change .. it says ..
Change Tax classification article 1 Full tax 0 No tax Ireland Output Tax
I have a few doubts .. first , is this changed only for a single country or for all of them .. & if I have reversed the changes ..
Plz suggest what shall I do to make it as it was ...
<< Moderator message - Please do not promise points >>
.. many thanks for your help
Edited by: Rob Burbank on Feb 7, 2011 3:54 PM

The tax classification section is dynamically defaulted based on the plants that are linked to your sales area.
for each plant country you will see an entry.
if such an assignment is made after go-live, then with the next change of material master you are asked to complete the classification.
This cannot be undone. you can just change it to another value if the value you entered was wrong.

Tax classification for sales order before ECC

Hi expert,
We have recently upgraded from 4.6C to ECC6.0 and noticed the following
issue, please kindly advise. Thanks.
The tax classification for one of the regular customer has always been
maintained as ‘0’ (Tax Exempt).
In 4.6C, in the sales order condition tab, the system will auto
calculate and reflect the output tax amount automatically for this
regular customer.
However, in ECC6.0, with the same customer and material, the sales
order will no longer auto calculate and reflect the output tax amount
anymore.
Nevertheless, if we maintain the customer tax classification field
as ‘1’ (Liable for Taxes) before raising the sales order, or if we
amended the sales order tax classification field manually as ‘1’, then
the output tax amount will auto calculte and reflect as expected.
We would like to know why is there such differences between 4.6C and
ECC6.0. What should be the proper standard behaviour and if there is
any actions required be get the system to perform as per in 4.6C?
Please kindly advise. Thanks.
Best Regards,
Vincent

Hi,
I am sure you must have done some of the analysis already on these points but it does not harm to do it again:
1) Check the Customer Master and check the Tax Category of the Customer to make sure that it is maintained as 0;
2) Check the Tax Record [MWST Tax Condition Type normally] for whichever tax table you are maintaining it for exists
3) Check in the Condition Tab in Pricing Details if you are finding the assess to the Tax Records happening for the Customer and Material combination.
If you find any of these three as the smoking gun you should be good.
I do not think personally that if the issue is only with one customer that this is an upgrade issue. Even otherwise, Tax related stuff has not changed in anyway between those versions.
Get back to me if you have any questions.
Thanks.

R12 - Input and Output Tax Classification Codes in Invoices Workbench

Hello,
After upgrade from 11i to R12, in invoices workbench, the Tax Classification Code LoV (invoice line field) contains taxes that formerly were both input and output.
In the E-Business Tax Implementation guide says that :
Release 11i tax codes and tax groups migrate to E-Business Tax as tax classification
codes. Payables and Purchasing tax codes migrate as tax classification codes under
ZX_INPUT_CLASSIFICATIONS. Receivables and Projects tax codes migrate as tax
classification codes under ZX_OUTPUT_CLASSIFICATIONS.
In invoices workbench form (APXINWKB), I looked in the record group for the LoV and the values are all from the same view zx_input_classifications_v.
SELECT lookup_code, meaning, description
FROM zx_input_classifications_v
WHERE lookup_type = 'ZX_INPUT_CLASSIFICATIONS'
   AND org_id IN (:inv_sum_folder.org_id, -99)
   AND enabled_flag = 'Y'
   AND nvl(:inv_sum_folder.invoice_date, sysdate)
                between start_date_active and nvl(end_date_active, :inv_sum_folder.invoice_date)
UNION
SELECT lookup_code, meaning, description
FROM zx_input_classifications_v
WHERE lookup_type = 'ZX_WEB_EXP_TAX_CLASSIFICATIONS'
   AND org_id IN (:inv_sum_folder.org_id, -99)
   AND enabled_flag = 'Y'
   AND nvl(:inv_sum_folder.invoice_date, sysdate)
                between start_date_active and nvl(end_date_active, :inv_sum_folder.invoice_date)
It follows that some formerly Payables and Purchasing tax codes were migrated as 'ZX_INPUT_CLASSIFICATIONS' or 'ZX_WEB_EXP_TAX_CLASSIFICATIONS'.
Anybody knows how is the 11i tax code data migrated to R12 ? Is this the intended behavior ?
Thanks

I'm not a functional expert but I would suggest reviewing the following docs and see if it helps.
How To Update EBusiness Tax Lookup Codes? (Doc ID 466578.1)
Payables - Invoices - Invoice Lines Tax Classification LOV duplicating entries (Doc ID 1265315.1)
Upgraded Tax Classification Codes Not Enabled For Iexpenses (Doc ID 851607.1)
Thanks,
Hussein

Alt tax classification

Similar Messages

Maybe you are looking for