Alt Text Only Showing
When I upload images, they do not show up in either Firefox
or Safari (but do in dreamweaver). I have tried both .gif and .jpeg
files, in both cases, only the alternate text that I enter will
show up on the Web. The browsers are set to show images
automatically. I am using Fetch to upload my files, as I get FTP
error screen when trying to upload through Dreamweaver. I am mostly
concerned with the images, and getting them to show up on the web
(obviously I am a new Dreamweaver user). Any help is greatly
appreciated, Aloha.
Post a link to a page please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"samanthadae" <[email protected]> wrote in
message
news:gmd4su$d6i$[email protected]..
> When I upload images, they do not show up in either
Firefox or Safari (but
> do
> in dreamweaver). I have tried both .gif and .jpeg files,
in both cases,
> only
> the alternate text that I enter will show up on the Web.
The browsers are
> set
> to show images automatically. I am using Fetch to upload
my files, as I
> get
> FTP error screen when trying to upload through
Dreamweaver. I am mostly
> concerned with the images, and getting them to show up
on the web
> (obviously I
> am a new Dreamweaver user). Any help is greatly
appreciated, Aloha.
>
Similar Messages
-
How do I get Alt text to show in DreamweaverCC
Please excuse my ignorance. I would like to know how to get the Alt text to show when hovering over images. It use to happen naturally in Dreamweaver 3, but now in the latest CC version it doesn't seem to work. I use it to link images to pages so when some one hovers over an image the finger points but no text appears? Is there a setting I have missed as I can't type in the code as I'm a novice? Any advice would be appreciated. The pages are all htm.
Hi Atrforrooms,
Use Image Property Inspector dialog in Dreamweaver CC. There is title field, whose value will be displayed on hovering over the image.
Below is the snapshot for better understanding and title is highlighted there. Try this and let us know if that worked for you.
Wish you luck.
thanks,
lnayal -
Honeycomb keyboard predictive text only showing names...
Ran a search for this topic and found nothing. I have a Honeycomb tablet (Lenovo IdeaPad K1) and the keyboard is set to show spelling correction suggestions (I'm a terrible speller) but its only showing names of people in my contacts, its not showing all the words that would be derivatives of whatever word I've started typing like my phone does. What gives? Is there some setting buried somewhere I can't find to get it to work like the spelling correction I'm used to. they way its working now its basically useless. Thanks.
Solved!
Go to Solution.I ended up buying Thumb Keyboard. It is amazing, thank you!
-
I have a word doc that I am trying to conver to pdf. I have jpegs with text boxes on top of them on one page. It looks great on the screen but after I convert to pdf, the text boxes only have half the text, the first half of the text box is just white - the background color. If I take the background color out of the text box, the text converts over fine but I need the background color.
I have tried many things here on the print settings, standard, high quality print, unchecking the compression on the images. Any help?Thank you for your posting. These forums are specific to the
Acrobat.com website and it's set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/ -
Save for Web is not displaying white text, only showing the drop shadow of a vector.
I just updated Illustrator this morning and now having this issue. I have two logos on the artboard. Both are filled with white, both have the same small drop shadow. The both show up on the artboard, but when I try to save for web or export into a .jpeg the white doesn't fill in on one logo, but it does on the other.
Anyone have any ideas on a fix?Do the white objects appear when in Overprint mode?
-
Just a question to know if my thoughts are right...
I have made my website and at the top DW has put:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml">
I have notices that the alt-text in my site are not working (the way I would like), they are not displayed when you go over the image with the cursor. I know that the alt text will show up if the image fails to load for any reason but I would like them to show up also when you go over the image.
After a long search I found that if I change DOCTYPE to HTML 4.01, the alt-text are displayed in the browsers (IE). But unfortunately I can't change the DOCTYPE because of my SPRY-menu.
Is this correct?
And is it also correct that the only way to show the text of an image (with doctype XHTML), is to make a title-tag of the image (which DW doesn't facilitate)?
Katinka.function(){return A.apply(null,[this].concat($A(arguments)))}
I know that the alt text will show up if the image fails to load for any reason but I would like them to show up also when you go over the image.
That's not the role of alt text. It's only for alternative text in the absence of an image-not a popup tooltip.
It has worked as a tooltip in earlier versions of IE because they incorrectly displayed the alt attribute in the absence of the title attribute. It won't work in modern browsers and it's unrelated to the Doctype.
Use the title attribute instead.
<img alt="Picture" title="Picture"> -
HELP! Need help generating TEXT-ONLY portal page...
Text Only Portal Question:
PLATFORM:
=================================================================
Sun Solaris (5.2 if memory serves) for db and mid-tier, running
8.1.7 DB and 3.0.9 (1.0.2.2) portal.
THE NEED:
=================================================================
I need to display text only portal pages. Some of the more
detailed concerns at this point are below. Also, I've had an open
tar on Metalink for about two weeks, and after research from
their end has resulted in no help.
THE ISSUES (so far):
=================================================================
IMAGES:
If an anchor [A HREF=...] tag uses an image as it's "text", I
need to strip out the ALT= text to show inside the anchor. If no
ALT text is available, then I would like to show the image name
as a default.
For example:
<img src=home.gif
alt=Home>
should display as:
Home
FORMS:
How do I get the resulting page from a form (which include the
login inputs and submit button, search box, advanced search page,
etc.) to be displayed by the text only page?
For example:
When a form is called, the <FORM> elements are as follows:
METHOD=GET or POST
ACTION=url (relative or absolute) to the script.
In this case, the action value is:
ACTION=/servlet/page?
pageid=6&dad=portal30&_schema=PORTAL30.
This calls the advanced search API.
I would expect that to redirect the browser back to some
text-only version, the ACTION= element would have to be changed
to be something like:
ACTION=[pathscraper]?/servlet/page?
pageid=6&dad=portal30&_schema=PORTAL30
REDIRECTION:
What happens when portal pages redirect internally? How do you
get back to the text-only page?
For example:
The login link on the standard Oracle Portal home page flips
from url to url to get to the actual login page. Our
implementation of Oracle portal goes from
[DOMAIN]/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
to [domain]/pls/portal30_sso/portal30_sso.login_page.
Since this is standard Oracle redirection, how can it be
intercepted so the portal30_sso.login_page can be presented as
text only?
TRIED SO FAR:
=================================================================
I've written a socket/text scraper in Perl, running it from a web
server. The problems mentioned above are really causing problems,
plus the whole cookie thing. Since Oracle Portal tries to push a
cookie to the client, when the client is another UNIX server,
the cookie thing doesn't work.
POSSIBLE OTHER SOLUTIONS:
=================================================================
Something...anything. I've tried to think of some method to
create some sort of PL/SQL procedure to catch the content then
strip out the HTML calls.
An Applet to do the same thing, but on the client side, but
since time is an issue, coding a complete Java applet isn't
really an option.
THE CONCLUSION:
=================================================================
HELP! I need some help. This is for a client that is government
funded, and to meet Section 508 (part of the Americans with
Disabilities Act that states web sites and applications must be
made accessible. A text-only page is one of the requirements for
an accessible page.
Thanks,
Ryan Stefani
ps: feel free to contact me via [email protected] or
[email protected]Use Find/Change and the GREP tab.
Search for .+ and set the Find formatting to find the charcteristics you want.
What will you do with this text once found? You'll need something to "change" to, either new text or Change Formatting options... -
3 problems: 1) I can't buy anything online. Firefox has a popup that states that all payment sites (Amazon, paypal, etc.) are forbidden and tries to protected me from them and blocks me (will not let me bypass the block). 2) Once I figure a work around the block Paypay shows as text only (shows all content on internet explorer) 3) try to upgrade adobe flashplayer as suggested in a forum and adobe flash can not upgrade when firefox is open. Been on firefox for several years now why the sudden ultimate security?
Quite honestly, I think you need to go back to Flash 10.3.183.90, a version that was kept alive specifically for WinXP users. The Flash 11 and later versions have a separate plugin container that isn't available for anything below Win Vista with feature you can't even use. I see no advantage to anything newer and on the down side the newer versions are a lot more likely to crash frequently.
First, grab the Adobe uninstaller from here:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
Then download Flash 10.3.183.90 from here - about halfway down the page:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
(Released 6/11/2013) Flash Player 10.3.183.90 (61.1 MB)
IMO, the best version of Flash for WinXP. Adobe kept up with security updates for 10.3 for WinXP users long after Flash 11.0 came out in 2011 for Vista and newer versions of Windows.
Run the uninstaller, then reboot your operating system.
Then you can run the Flash installer, with Firefox closed, of course.
''Note, if you still use IE, you'll need to reinstall the ActiveX version of Flash for IE. That uninstaller removes all versions of Flash that might be installed,'' -
Unable to print added text only in Acrobat Pro XI
User is trying to print added text that's been added to an existing PDF page. In Acrobat X she chose "Form fields only" under Comments & Forms from the Print menu. In XI it produces a blank page. The added text only shows up if she chooses Document or Document and Markups, but then she gets the entire document. She only wants the added text to print.
Thanks to all who commented here. I found that adding text using Tools>Content Editing>Add Text will not allow the user to print solely the added text. As everyone responded here, that's as designed. However, using Comment>Annotations>Add Text does allow the user to print solely the added text as she was used to doing in Acrobat X. I thought it was the same tool under two different headings, but obviously they interact differently in the print menu. Choosing Form fields only from the Print Menu's Comments & Forms panel will produce solely the text added under the Comment panel's Add Text tool without printing the rest of the document page. And the user doesn't have to turn the document into a form to do so.
-
I added alt text to an Indesign created graphic but it won't show in Acrobat
I created these little check boxes in InDesign, basically a stroked box with a copied-from-Illustrator check mark. The box and the check are grouped and anchored to the each paragraph where the item has been completed (checked). I made sure the content of the frames were designated as graphic and not text or unassigned. I then click on the group, open object export options and assign a alt text desription (using custom setting), such as "completed" or "previiously completed", which is a gray check mark. InDesign shows the alt text, but when I export to Acrobat the PDF does not display the alt text. It sees it as a graphic but will not show the alt text that I created in InDesign.
The only way I have found to fix this is to create the entire box and check in illustrator and import as "real" graphic. This is kinda of pain to reimport and reposition all the boxes, when InDesign has the ability to create these simple graphics.
Any clue as to why Acrobat will not show the alt tags?Pretty annoying - I didn't "chose" to not show my settings....
you selected something other than "show all" in the popUp menu over the presets list -
Hi Creatives,
it's a simple question? How can I add an alt text to images?
Right click image properties doesn't show.
Thanks,
RadoYou can only use Alt text, if you place an image. Alt text is not available, if you fill a box with an image.
-
My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that
Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue. -
My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that
Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue. -
When i reply to a group text it only shows one recipient and says "failed to send"
I receive a text from a group thread I've been in for ears, when I open the text and respond, it only shows one of the members in the "to" line and then wont let me send any messages. any ideas? Also, if I'm typing a text and I get another text the whole keyboard locks and goes black until the text notification goes away. is this supposed to happen?
Yes, that is correct.
-
Previously when I logged in to my INGdirect online bank account, the login window came up showing images and clickable hotspots. Recently, the login window changed to a text-only version. On two different computers running Firefox, the login comes up in the previous version, with images and clickable hotspots. I'm unaware of having done anything to change my settings either in Firefox or on the banking website. Because it seems to be localized on this computer, I've tried downloading latest version of Firefox, but got no change, login still comes up in text-only format.
Try clearing your browser cache.
Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.
Maybe you are looking for
-
Firefox won't fully open the Roboform Toolbar any more. It used to work well. Now when I click on View/Toolbars/Roboform it opens a blank toolbar with the only option as "close", which closes the toolbar. How do i get Firefox to make this work normal
-
Implementing cache for dropdown values in Web Dynpro Iview
Hi All, I am currently in the processing of enhancing a web dynpro application which contains among other things around 15 drop down boxes. The values in these drop down boxes are coming from oracle database and these values change occasiona
-
Extracting Metadata using Common Table Expressions MSSQL
I have been using the below SQL query to extract subsets of the Metadata structure from several dimensions in HFM. The process works well and is simple/quick to develop and incorporate in existing processes. I am curious if anyone else has been using
-
Content Viewer crashing when changing orientation
The magazine I've made seems to be crashing A LOT when I change orientations. This is more noticeable when I go back and fourth between orientation Vertical to Horizontal then imediately back to Vertical. (My client is pissed off). I've tested this o
-
Internet Speed slowed to 56k when i get home from work.
From 6pm pacific to 11 pm every night my internet is very erratic. going from 0-1mbps. When i use the tech support they always accelerate the issue and tell me i will get a call from someone else. Everytime i tell the tech support they have to call m