Alternate Access Mapping not working

I am trying to configure alternate access mapping in sp2013.
My default url for site is https://intranet
My client has given a url https://intranet.theirDomain.com
When I ping "intranet.theirDomain.com" on their local machine it is returning IP: 192.168.0.87
When I ping "intranet", it is giving IP: 192.168.0.86
I have edited the Public Zone URL as follows
Default: https://intranet
Intranet: https://intranet.theirDomain.com
In IIS the following bindings are there.
https intranet 443 *
https intranet.theirDomain.com 443 *
But still https://intranet.theirDomain.com is not working
https://intranet is working.
I hope all are configured correctly.
Or doing any wrong? please guide me.
S H A J A N

It sounds like the 'intranet' A record in the theirDomain.com zone isn't pointed at the correct IP address (192.168.0.86).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

Alternate Access Mapping not working for Zone : Intranet

One of our client want to set Alternate Access Mappint (intranet) with url "intranet.theirDomain.com" with local IP address.
is it possible?
subsequest to my previous question (
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3f39711e-301a-40e8-aa7a-855fa2c268b1/alternate-access-mapping-not-working?forum=sharepointadmin )
I want to ask one more question
Can we configure "intranet.theirDomain.com" with local IP address for any other zone?
or
If there is ".com" within the url then it can't be configured for InTRAnet?
Thanks
S H A J A N

The names for the zones don't matter. You could use the 'extranet' zone for another intranet name if you wanted, the names are just to make it a bit more friendly for beginners.
What you describe sounds routine, you create a web application with a name, then use an AAM to allow users to access it with a more friendly name. Frequently you end up creating
http://intranet.domain.com and
http://intranet as an AAM, or vice versa.
You can use .com for an intranet site, you would need to add the site as an A Host record in your DNS server so that traffic is sent to your internal server rather than out into the wider world.

Alternative Access Mapping not working "You're not connected to a network"

Hi *,
i want to set up alternate access mapping in my sharepoint 2013 development environment.
My SharePoint is reachable through http://sp2013.
I created a second web application with listens on port 8080. When i open http://sp2013:8080 everything works fine and i can see my root site collection.
Next i added through "Add internal Urls" a new url -> http://sp2013test to the default zone.
Next i edited the bindings in the iss application for this web application and added http://sp2013test listening to port 80:
But i does not work! I get the message "You’re not connected to a network" from the ie.
I dont want have to call my WebApps through ports. I want to have WebApplication which i can call through clear names like http://customerWebApp1, http://customer2WebApp. All via Port 80.
Whats wrong here?
Best Regards
Bog
Developers Field Notes | www.bog1.de

Hi Bob,
For you issue, try to map web application URLs to the local loopback address. For that you need to update host file at the path:(C:\Windows\System32\drivers\etc\hosts)
Here is a link about Setup Multiple SharePoint Web Applications on Port 80 with Https Binding on Port 443, you can use as a reference:
http://onlinecoder.blogspot.com/2012/10/setup-multiple-sharepoint-web.html
Best Regards
Lisa Chen

Alternate Access Mappings - not working

I have an internal site http://km-resource
I want to add an alternate access mapping as http://km-test.
When I when to http://km-test, I got an error of page cannot display.
Do you need to have full internet address such as
http://www.km-resource.com in order for alternate access mapping work? Please advise.
Many thanks.

The issue is your PC's browser isn't resolving the IP address of km-test.
If you are just testing you ...could... alter your PC's HOSTS file found in C:\Windows\System32\drivers\etc\
Add a line like the following:
192.168.1.55 km-test
192.168.1.54 km-resource
Use whatever the web server's front end IP address is on the NIC for the HOSTS ip address to km-test. If your test machine is windows 8 then to edit your HOSTS file you may need to drag and drop it to your desktop first, edit it, save it,
then drag it back to the /etc/ folder.
Also do like some others have said and add the host header for km-test in IIS.
You could also add an entry on your network load balancer to do the same redirection to km-test for internal network users.
But adding a DNS entry on your DNS server to resolve km-test to the web server's IP address is the best and recommended way internally for production.

Cannot open web address by doing Alternate Access Mapping

Dear SharePoint Expert,
I setup testing environment in internal network, I create the web&site collection by using http://demo01 (it's the machine name). I already test site, it's ok.
But when I alternate access mapping by edit internal url to common web address, It maps to http://eOffice.local
but It's show Pop-up to login. I try to login many times. It's not work, and it didn't show anything.
What happened?
Please help to suggest

Hi,
Do you mean that the credential dialgo poped up 3 times then show blank page when you log with your credential?
please try disabling loopbackcheck on your SharePoint server, then check if it could work.
http://blog.blksthl.com/2013/05/07/a-quick-guide-to-configuring-the-loopback-check/
https://support.microsoft.com/en-us/kb/896861?wa=wsignin1.0
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Alternate Access Mapping Issue

This is probably pretty simple, but I can't seem to figure this one out. I have an alternate access mapping setup. I can get to
http://sharepoint, but
http://sharepoint.domain.com asks for credentials and gives me a 401 Unauthorized
message.
Where should I be looking to resolve this?

So when setting an AAM, it does not set the IIS binding. In order to set the IIS binding, you would need to remove the Web Application from the IIS site (alternatively, add the IIS binding manually).
Because you are adding a . in the URL, you will be prompted for credentials. If using NTLM, it should just go through. If using Kerberos, there will be additional steps -- so is the Web App configured with NTLM or Kerberos?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Unknow URLs getting reported in Alternate access mapping errors

Alternate access mappings have not been configured. Users or services are accessing the site << site name >> with the URL https://cgi.im.qq.com. This may cause incorrect links to be stored or returned to users. If this is expected,
add the URL https://cgi.im.qq.com as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
Question: Now I don't know this URL but somehow I am seeing many URL like these coming once or twice during night time. Is somebody trying to do DNS Spoofing on the machine> or hacking of any sort? I did not had much help on the internet?

Hi,
This issue may be due to some users access the site with URL
https://cgi.im.qq.com or users use services to access the site with URL
https://cgi.im.qq.com.
I recommend to check if this URL has been added to the IIS(Internet Information Services) binding of the web application.
If you want to avoid such errors, you need to add the URL
https://cgi.im.qq.com to Alternate Access Mapping of the web application or remove such bindings from IIS.
More references:
https://social.technet.microsoft.com/Forums/en-US/f9cfd933-58a0-4715-963a-afba54f7c720/odd-url-causing-alternative-access-mapping-warnings?forum=sharepointadminprevious
http://samirvaidya.blogspot.com/2011/03/alternate-access-mappings.html
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Alternate Access Mapping Problem

I have one site that keeps giving me numerous warnings in the Event Viewer. Event 8059, SharePoint Foundation.
Alternate access mappings have not been configured. Users or services are accessing the site http://investigator.domain.com:12151 with the URL http://investigator.domain.com:12151. This may cause incorrect links to be stored or returned
to users. If this is expected, add the URL http://investigator.domain.com:12151 as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
The http://investigator.domain.com:12151 is setup as the Default Authentication Provider and http://investigator.domain.com has been extended to Intranet. This also displays in the Configure Alternate Access Mapping so it appears correct.
Yet the above error continually repeats it self.
How can I get rid of it?

what is your AAM settings are?
is this url in the AAM or not http://investigator.domain.com:12151?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Value mapping not working properly

Hi All,
I am using value mapping twice in same mapping program. But only 1 field is coming with value and other is taking same value from source payload, can you please tell me what can be issue here?
Value mapping 1 -
Context - http://sap.com/xi/XI
SenderParty- SenderSchema
ReceiverParty- ReceiverSchema
Value Mapping table in ID -
Value mapping at field 2 -
Context - http://sap.com/xi/XI
SenderParty1- SenderSchema1
ReceiverParty2- ReceiverSchema2
Value Mapping table in ID -
Source payload -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VM_Send xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
   <Record>
      <Emp_ID>123</Emp_ID>
      <Name>rash</Name>
      <Surname>sumit</Surname>
      <Gender>Male</Gender>
     <Grade>E2</Grade>
</Record>
</ns0:MT_VM_Send>
Target Payload -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VM_Receiver xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
<Record>
<Emp_ID>123</Emp_ID>
<Full_Name>rash sumit</Full_Name>
<Designation>E2</Designation>
<Gender>M</Gender>
<Travel_Mode>Train</Travel_Mode>
</Record>
</ns0:MT_VM_Receiver>
Here travel_mode is coming perfect, but designation is same as defined in source payload. Why here Value mapping not working???
Thanks & regards,
Rashmi Joshi

Hi Rashmi,
The problem would either be in cache update or your mapping. Please provide the sceenshot of mapping (after clicking the value mapping function).
you can also choose the option to throw error in value mapping function, so it will throw error when value not found.
regards,
Harish

Camera, Browser & Maps Not Working

Hi,
It been since yesterday my Z10 camera, broser & maps not working.
Whenever I click the camera icon, it is not even opening.
Browser icon had changed, it turned to a triangle square & circle.
Can anyone help me out.
Thanks,
Chris

The update may not have loaded properly, you can reload this way: http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB34045&sliceId=2&docType=kc&noCo...
Or do a Security Wipe (Reset to Factory Settings) this way:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB33591&sliceId=2&docType=kc&noCo...
Please read both carefully !

Alternate access mapping and binding in IIS for NLB nodes(2)

Hello All,
We have configured NLB for 2 nodes( 1 is App and WFE1 and 2 is WFE2).
here, we have given NLB host name to the users to browse. but, do we need to configure any thing in alternate access mapping and in IIS bindings, if yes, Please elaborate step by step please.
Thanks in advance
NLB host name and IP: abc.ap.company.com /10.11.12.95
Node1 server: abc.appri.company.com / 10.11.12.93
Node2 server: abc.appsec.company.com / 10.11.12.94
how to do this.
NARLA

Assuming you configured the web application to use the URL http://abc.ap.company.com there is no additional IIS configuration needed on the servers.
If you're interested in accessing a specific server you can create a hostfile entry on your client machine that abc.ap.company.com to one of the two servers.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Alternate access mapping SP2010

Hello,
we have internal team sites based on SP2010. Now we already have 5 AAM mapping entries tied with each zone. So question is can I add one more entry to AAM? If yes then I have to used the one of the zone which alreayd used. Will that be ok?
Please help!
Thanks,

Hi,
For SharePoint Alternate Access Mapping,you need to understand the following basics:
Internal URL redirects or transforms to a
Public URL, from left, to right. The URL on the left, is what you enter in the address field in your browser, the
Public URL on the right is what you will see once there, this goes for visible and invisible links as well.
Internal URL format: Protocol + URL (+non default port)
Public URL is the address of the Web Application for one of the five zones available. The ‘Default’ must be filled out and has some special properties/uses, the other four are optional. You can only have five
Public URL’s per Web Application.
This is the URL that the browser will be redirected to in the end.
Public URL format: Protocol + URL (+non default port)
Zone is a label representing a
Public URL, the zone is used to ‘connect’ an Internal URL to a
Public URL.
Multiple internal URLs can be associated with a single public URL. Mapping collections can contain up to five authentication zones. But each zone can have only a single public URL.
So you can add multiple internal URLs mapping one zone, but each zone can have only one public URL.
Reference:
http://blog.blksthl.com/2012/12/03/a-guide-to-alternate-access-mappings-basics-in-sharepoint-2013/
https://gallery.technet.microsoft.com/The-final-guide-to-551bd75b
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Alternate greeting is not working

Alternate greeting is not working on Unity connection 8.X. Only standard greeting is played even after activating alternate one.
All users are affected.
Please advise.

If you activated Android Device Manager on your phone and associated it with your Google account, you may be able to use Android Device Manager to unlock your phone.

Apple maps not working on iMac

apple maps not working on iMac the little thing just keeps turning

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.Maps.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

DPS global ACI (mapping not working)

Hello!
we are using DPS 6.3.
We have several connection handlers configured which are mapping the requests from base dc=unicreditgroup,dc=eu to dc=hvb,dc=de and back from dc=hvb,dc=de to dc=unicreditgroup,dc=eu. Works fine.
We now want to configure a global ACI for DPS to allow only certain Attributes to be available through the DPS.
To test the global ACI I configured:
bash-3.00# less access_controls.ldif
dn: cn=virtual access controls
objectclass: top
objectclass: ldapSubentry
cn: virtual access controls
dn: cn=vitualaci,cn=virtual access controls
objectclass: aciSource
dpsaci: (targetattr="*")(target="ldap:///ou=people,dc=unicreditgroup,dc=eu"
) (version 3.0;acl "perm1"; allow(all) userdn ="ldap:///anyone";)
cn: cn=vitualaci
And I configured a connection handler to use this ACI:
dpconf set-connection-handler-prop -h localhost -p 389 hvbBinds aci-source:vitualaci
When I now try a ldapsearch I won't get any information back. The access log shows that the mapping unicreditgroup to hvb is not working any more.
Without global ACI the access log looks like this. The underlined words show the mapping:
[17/Nov/2008:10:26:56 +0100] - CONNECT - INFO - conn=2 client=127.0.0.1:41528 server=localhost:389 protocol=LDAP
[17/Nov/2008:10:26:56 +0100] - PROFILE - INFO - conn=2 assigned to connection handler cn=default connection handler, cn=connection handlers
, cn=config
[17/Nov/2008:10:26:56 +0100] - OPERATION - INFO - conn=2 op=0 BIND dn="uid=m050183,ou=people,dc=unicreditgroup,dc=eu" method="SIMPLE" version
=3
[17/Nov/2008:10:26:56 +0100] - SERVER_OP - INFO - conn=2 op=0 BIND dn="uid=m050183,ou=people,dc=hvb,dc=de" method="SIMPLE"" version=3 s_msgid
=2 s_conn=dsmmucqsu09:16
[17/Nov/2008:10:26:56 +0100] - SERVER_OP - INFO - conn=2 op=0 BIND RESPONSE err=0 msg="" s_conn=dsmmucqsu09:16
[17/Nov/2008:10:26:56 +0100] - PROFILE - INFO - conn=2 assigned to connection handler cn=hvbBinds,cn=connection handlers,cn=config
[17/Nov/2008:10:26:56 +0100] - OPERATION - INFO - conn=2 op=0 BIND RESPONSE err=0 msg="" etime=0
[17/Nov/2008:10:26:56 +0100] - OPERATION - INFO - conn=2 op=1 msgid=2 SEARCH base="_dc=unicreditgroup,dc=eu_" scope=2 filter="(uid=m050183)" at
trs="*"
[17/Nov/2008:10:26:56 +0100] - SERVER_OP - INFO - conn=2 op=1 SEARCH base="_dc=hvb,dc=de_" scope=2 filter="(uid=m050183)" attrs="*" s_msgid=3 s
_conn=dsmmucqsu09:16
[17/Nov/2008:10:26:56 +0100] - SERVER_OP - INFO - conn=2 op=1 SEARCH RESPONSE err=0 msg="" nentries=1 s_conn=dsmmucqsu09:16
[17/Nov/2008:10:26:56 +0100] - OPERATION - INFO - conn=2 op=1 SEARCH RESPONSE err=0 msg="" nentries=1 etime=510
[17/Nov/2008:10:26:56 +0100] - OPERATION - INFO - conn=2 op=2 UNBIND
[17/Nov/2008:10:26:56 +0100] - DISCONNECT - INFO - conn=2 reason="unbind"
*With global ACI* the mapping does not work any more and the access log looks like this.
I underlined only dc=unicreditgroup,dc=eu because there is no mapping to dc=hvb,dc=de:
[17/Nov/2008:10:22:31 +0100] - CONNECT - INFO - conn=57 client=127.0.0.1:41360 server=localhost:389 protocol=LDAP
[17/Nov/2008:10:22:31 +0100] - PROFILE - INFO - conn=57 assigned to connection handler cn=default connection handler, cn=connection handler
s, cn=config
[17/Nov/2008:10:22:31 +0100] - OPERATION - INFO - conn=57 op=0 BIND dn="uid=m050183,ou=people,dc=unicreditgroup,dc=eu" method="SIMPLE" versio
n=3
[17/Nov/2008:10:22:31 +0100] - SERVER_OP - INFO - conn=57 op=0 BIND dn="uid=m050183,ou=people,dc=hvb,dc=de" method="SIMPLE"" version=3 s_msgi
d=3 s_conn=dsmmucqsu08:4
[17/Nov/2008:10:22:31 +0100] - SERVER_OP - INFO - conn=57 op=0 BIND RESPONSE err=0 msg="" s_conn=dsmmucqsu08:4
[17/Nov/2008:10:22:31 +0100] - PROFILE - INFO - conn=57 assigned to connection handler cn=hvbBinds,cn=connection handlers,cn=config
[17/Nov/2008:10:22:31 +0100] - OPERATION - INFO - conn=57 op=0 BIND RESPONSE err=0 msg="" etime=0
[17/Nov/2008:10:22:31 +0100] - OPERATION - INFO - conn=57 op=1 msgid=2 SEARCH base="_dc=unicreditgroup,dc=eu_" scope=2 filter="(uid=m050183)" a
ttrs="*"
[17/Nov/2008:10:22:31 +0100] - OPERATION - INFO - conn=57 op=1 SEARCH RESPONSE err=0 msg="" nentries=0 etime=0
[17/Nov/2008:10:22:31 +0100] - OPERATION - INFO - conn=57 op=2 UNBIND
[17/Nov/2008:10:22:31 +0100] - DISCONNECT - INFO - conn=57 reason="unbind"
This seems to be the problem why I don't get any data back when I'm trying an ldapsearch.
ldapsearch -h localhost -p 389 -b dc=unicreditgroup,dc=eu -D "uid=m050183,ou=people,dc=unicreditgroup,dc=eu" -w xxxxxx '(uid=m050183)'
Any idea if I'm doing something wrong or if it is a bug that the mapping does not work?
Best regards,
Beate

Hello!
I was told by Sun that it is a bug.
Regards,
Beate

Alternate Access Mapping not working

Similar Messages

Maybe you are looking for