Alternate design for the ORS org structure

Hi Gurus,
Need your expert advise on below issue. We are currently on SRM 5.0 using classic scenario.
We are currently exploring the feasibility of either adopting the HR org structure for ORS or an alternative to the org chart that supports workflow routing  and is not cumbersome to maintain.
Please advise if there is any other alternate design aside from adopting  HR org unit to ORS. Can also advise if that design as an org chart will support workflow.
Many thanks for the help.
jho

Thanks for the help

Similar Messages

  • How will an external Hard drive designed for the macbook Pro work with my White Macbook?  My  white macbook has a Firewire 400 and the G-Tech HD has a 800 to 400 compatible cable for the firewire.

    I am asking this because I want the G-Tech Hard drive  says that it is designed for the macbook pro.  Yet, I want to back up faster with by using my firewire 400 which is not an option on the one designed for the white macbook that does not have a firewire (only a USB port.)  The G-Tech Hard drive comes with the 800 to 400 compatible cable and has 5400 RPM with 750 GB.  Also, I've heard that laptops with low battery (mine all the time)  won't have the power for a bus powered Hard drive (as in no ac plug in adaptor.)  Can I just plug in my laptop?  Any one know the answers from experience with this hard drive?

    As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
    If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first.

  • I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

    I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)   If I move the application window to another screen it adjusts it correctly  – leaving all the pallettes, menus and tools correctly sized as they are on the retina display   Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?   There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.  MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

    I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
    If "open in low resolution" is unckecked the appearance is good but the very small size.
    See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

  • Need best Architecture design for the following scenario

    Hi Experts,
    I need best architecture design for the following scenario:
    Sender: Mail
    Receiver: if sender body contain u201DApproveu201D, then call SOAP adapter, If SOAP adapter execute successfully, then  send Mail(SOAP adapter executed successfully) and SMS .  So receiver is SOAP, Mail and SMS.
    My current approach issue:
    Three message mapping:
    Mapping1: mail to SOAP
    Mapping2: mail to Mail
    Mapping3: mail to SMS
    In interface determinant>u201DSelect all three operation mappingu201D> u201Cselect order at runtimeu201D.
    Issue in current approach: For me first SOAP adapter should complete successfully, after that only my Mail and SMS operation mapping should execute:
    But problem is before success of SOAP adapter engine, Mail and SMS mapping completed or integration engine executed.
    Note: There is possible to fail the SOAP request in adapter engine.
    Kindly help me --> u201CAm I going correct way or want to change the architectureu201D?
    Thanks for advance!!
    Regards, Kumar

    What do you mean by successful execution of soap call?  Are you talking about Successful response (happy flow) from the soap call instead of application error ? Then based on the response you want to decide sending mail and sms.  How big call is your soap ?  If your soap interface is very simple I can give the other possible way.
    Sender sends the message, use mapping  to read the content and then do soap call in the mapping itself and after seeing the soap response decide about two receivers (mail and SMS).  If your soap call is very simple one, you can go for it. Otherwise I would not recommend this. The reason is you loose some visibility regards to monitoring during soap call in the mapping.
    Other option is go for CCBPM.  Here you receive the message, use send step to soap interface which is sync step. Then after seeing the response create another block with fork steps each for two senders mail and sms. If response bad then dont proceed or execute the next block. Simply use exeception or control step to jump out from the block,

  • A sleeve exclusively designed for the retina 15" macbook pro?

    I want to buy a sleeve for my 15" retina macbook pro, but i realize that there are a lot of sellers that advertise their prodcuts as "made for retina" but in reality they were made for the classic macbook pro, so they fit loose , baggy... can you recommend a good sleeve specifically designed for the 15" retina macbook pro? I would like one with a pocket for the charger, so far these two are my choices:
    Booq Mamba Sleeve 15 http://www.booqbags.com/us/sleeves/mamba-sleeve/MSL11-GRY
    Incase Neopreno Pro Sleeve http://store.apple.com/us/product/HA175ZM/A/incase-15-neoprene-pro-sleeve-for-ma cbook-pro-with-retina-display?fnode=50

    I am also looking for such a case. I find that since the Retina is smaller/thinner -- every case I try the laptop is swimming around inside. I also feel like the laptop itself is less bulky so I'd like a case that takes advantage of our ability to be more sleek and small while traveling.
    Have you had any luck finding a case?

  • Alternate Address for the same Vendor Code.

    Hi,
    Can we maintain Alternate address for the same vendor code, if yes how can we maintain that?         Plz. explain me.

    Partner function also..u may have to create a new vendor code with new address...
    https://www.ucflex.uc.edu/help/nav/accounts%20payable/course/vendor%20master%20data%20maintenance/file178/index.htm

  • How to search in BI 7.1 query designer for the required key figures & chars

    Hi All,
         Can anyone plz tell me how to search in BI 7.1 query designer for the required key figures & characteristics. I have the query being built on a multiprovider which has many cubes.
    So, i have a huge list of key figures and characteristics. I am not able to search for the required one by the name or the technical name.
    How can we search and pick the required object from the enormous list of the Mutliprovider in the Bex Query Designer??
    Thanks
    Phani

    There is not a search feature available. You have to do an educated guess under what dimension your infoobject could be and select.

  • Designing for the iPad 3 Questions

    Hi Guys,
    I am currently working on designing a digital magazine intended for the iPad 3.
    When I design my psd working files at 1536 x 2048px at 300 ppi and then place them in the indesign file they appear to be about half the size that I would think they should be. So I exported the page as a PDF from indesign and then opened it in photoshop. When opened it's dimensions were 5588 x 7453 px at 300 ppi. So I saved this and placed it back in indesign and it appears to fit correctly.
    This seems funny to me as it ends up being larger than a print publication. It ends up being around 21" x 29".
    I know I must be doing something wrong but if I could please get a little bit of help it would be great.
    I guess my basic question is how should I set my psd files up when designing for the iPad 3?
    Thanks!

    Hi Joe,
    It seems like you are having some trouble with your ppi settings. If you are going to be designing for the screen (e.g. iPad, web) you need to use 72ppi. It may seem a bit odd as the iPad's actual ppi is significantly higher than this, but thats just the way it is. If you change your settings to 72 ppi, everything should go back to normal.
    EDIT: Bob Bringhurst explains the difference between effective and actual ppis in this thread here: http://forums.adobe.com/message/4319794#4319794
    Cheers!

  • Forums.ni.​com site designed for the mobile user

    Isn't it time there was a mobile site designed for the mobile device user wanting to catch up on discussions. While you can view the site on mobile devices, navigating around can be quite a chore. With the normal site there is too much information on the screen at any one time and having to zoom in and scroll about from left to right to read a message is a bit of a headache.
    Regards
    Ray Farmer

    "Mobile optimized" sites will probably soon be a thing of the past. They were made to avoid problems with ultra tiny screens and very slow connections (remember GPRS?).
    A typical mobile device now runs on 3G or even 4D and the screens are sometimes 800x640 or higher.
    My android G1 phone is over 2 years old, and I still typically prefer the full site. I'll probably upgrade in a few weeks and will at least double the screen resolution. I'll stick with the regular site.
    (One problem is the placement of the new kudos gadgets. It is impossible to see them at the same time with the post author, thus creating significant confusion to figure out what belongs to where ... ).
    LabVIEW Champion . Do more with less code and in less time .

  • Portlets not coming as per layout for the Cutomized layout structure

    I have created new Customized layout for our application.
    I could see the cutomized layout properly in Workshop. When i am adding the portlets to all of the placeholders in layout and running the portal , out put i could see all the portlets are coming in vertical and not as per structure as per i defined.
    COuld not understand why it is happening when it is displaying properly in Workshop IDE.
    One more issue i could not define the Height attribute to the placeholders .How to have cutomized heights for the placeholders?
    Here are the My layout codes
    Homelayout.layout_
    <?xml version="1.0" encoding="UTF-8"?>
    <netuix:markupDefinition xmlns:netuix="http://www.bea.com/servers/netuix/xsd/controls/netuix/1.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/servers/netuix/xsd/controls/netuix/1.0.0 markup-netuix-1_0_0.xsd">
    <netuix:locale language="en"/>
    <netuix:markup>
    <netuix:layout title="homePageLayout" description="This layout is for home page of the portal"
    skeletonUri="homePageLayout.jsp" htmlLayoutUri="/framework/markup/layout/homePageLayout.html.txt"
    markupType="Layout" markupName="homePageLayout">
    <netuix:placeholder title="top" description="The top most placeholder in this layout."
    flow="vertical" usingFlow="true"
    markupType="Placeholder" markupName="custom_Top">
    </netuix:placeholder>
    <netuix:placeholder title="center" description="The left of center placeholder in this layout."
    flow="vertical" usingFlow="true"
    markupType="Placeholder" markupName="custom_center">
    </netuix:placeholder>
    <netuix:placeholder title="bottomLeft" description="The right of center placeholder in this layout."
    flow="vertical" usingFlow="true"
    markupType="Placeholder" markupName="custom_bottomLeft">
    </netuix:placeholder>
    <netuix:placeholder title="bottomCenter" description="The right most placeholder in this layout."
    flow="vertical" usingFlow="true"
    markupType="Placeholder" markupName="custom_bottomCenter">
    </netuix:placeholder>
    <netuix:placeholder title="bottomRight" description="The right most placeholder in this layout."
    flow="vertical" usingFlow="true"
    markupType="Placeholder" markupName="custom_bottomRight">
    </netuix:placeholder>
    </netuix:layout>
    </netuix:markup>
    </netuix:markupDefinition>
    homeLayout.html.txt_
    <table class="portalLayout" id="thePortalLayout" width="100%" height="100%">
    <tr height="40%">
    <td colspan="3" class="placeholderTD" valign="top" width="100%" >
    <placeholder number="0"/>
    </td>
    </tr>
    <tr height="10%">
    <td height="10%" colspan="3" class="placeholderTD" valign="top" width="100%">
    <placeholder number="1"/>
    </td>
    </tr>
    <tr height="50%">
    <td class="placeholderTD" valign="top" width="25%">
    <placeholder number="2"/>
    </td>
    <td class="placeholderTD" valign="top" width="50%">
    <placeholder number="3"/>
    </td>
    <td class="placeholderTD" valign="top" width="25%">
    <placeholder number="4"/>
    </td>
    </tr>
    </table>
    Skelnton JSP*
    <%@ page import="com.bea.netuix.servlets.controls.layout.PlaceholderPresentationContext,
    com.bea.netuix.servlets.controls.layout.BorderLayoutPresentationContext"%>
    <%@ page import="java.util.List" %>
    <%@ page import ="com.bea.netuix.servlets.controls.layout.LayoutPresentationContext"%>
    <%@ page session="false"%>
    <%@ taglib uri="http://www.bea.com/servers/portal/tags/netuix/render" prefix="render" %>
    <%
    LayoutPresentationContext layout = LayoutPresentationContext.getLayoutPresentationContext(request);
    List children = layout.getChildren("layout:placeholder");
    PlaceholderPresentationContext custom_Top =
    (PlaceholderPresentationContext) children.get(0);
    PlaceholderPresentationContext custom_center =
    (PlaceholderPresentationContext) children.get(1);
    PlaceholderPresentationContext custom_bottomLeft =
    (PlaceholderPresentationContext) children.get(2);
    PlaceholderPresentationContext custom_bottomCenter =
    (PlaceholderPresentationContext) children.get(3);
    PlaceholderPresentationContext custom_bottomRight =
         (PlaceholderPresentationContext) children.get(4);
    %>
    <render:beginRender>
         <table border="0" ... write style attributes ... cellspacing="0" >
              <tr>
                   <td colspan="3" class="bea-portal-layout-placeholder-container"
                        <render:writeAttribute name="width" value="<%=custom_Top.getWidth()%>"/>>
    <render:renderChild presentationContext="<%=custom_Top%>" /></td>
              </tr>
              <tr>
                   <td colspan="3" class="bea-portal-layout-placeholder-container"
                        <render:writeAttribute name="width" value="<%=custom_center.getWidth()%>"/>><render:renderChild
                        presentationContext="<%=custom_center%>" /></td>
              </tr>
              <tr >
                   <td class="bea-portal-layout-placeholder-container"
                        <render:writeAttribute name="width" value="<%=custom_bottomLeft.getWidth()%>"/>><render:renderChild
                        presentationContext="<%=custom_bottomLeft%>" />
                   </td>
                   <td class="bea-portal-layout-placeholder-container"
                        <render:writeAttribute name="width" value="<%=custom_bottomCenter.getWidth()%>"/>><render:renderChild
                        presentationContext="<%=custom_bottomCenter%>" />
                   </td>
                   <td class="bea-portal-layout-placeholder-container"
                        <render:writeAttribute name="width" value="<%=custom_bottomRight.getWidth()%>"/>><render:renderChild
                        presentationContext="<%=custom_bottomRight%>" />
                   </td>
              </tr>
         </table>
    </render:beginRender>

    Sanket,
    First test it using ADF Business Components tester. Does it work there?
    If not, check your view link definition.
    If so, make sure you have defined the correct View Object Usages in your application structure file.
    Steven Davelaar,
    JHeadstart Team.

  • Problem replicating the PPOMA_BBP Org. structure num.range

    ECC 6.0 EHP 6
    SRM Add On 7.02
    Dear Org management gurus,
    we have a stand-alone SRM system which is currently being used as our procurement system in our SAP systemlandscape. We are implementing SRM@ERP to replace this existing stand-alone server. We would like to replicate the PPOMA_BBP  Organisation structure from the stand-alone server to SRM@ERP server.
    In the source SRM system, we create a distribution model for distributing the organizational units from the source to the target system. The procedure we follow is the same as that for distributing organizational units from an HR system. Organizational units are  distributed using the RHALEINI report.
    However our current problem is, there is already an existing PPOME organisational structure in our ERP server which is created with number
    range 5*. And the same number range is also being used in our existing source SRM system for PPOMA_BBP structure. When we wish
    to replicate the structure from source to target system the Org Objects cannot be created due to the number range overlapping.
    We are looking for a possibility to replicate the structure and generate Org Objects using a different number range, for ex. 99*.
    Can you give us a hint how we can achieve this?
    Thanks & best regards,
    Henning

    Hello Henning,
    check BAdI HRALE* (include RHALEDAT) or customer-function EXIT_SAPLRHA0_XXX (called by  RH_OBJECT_IDOCDATA_CREATE function module).
    Regards.
    Laurent.

  • Creating Two Different Designs for the same site

    I already have a website (www.ernestbuckley) but would like to design an alternate site with the same name and from time to time, just switch between the two for variety. Can this be done? Will I lose any data when I switch back and forth?

    Apnewbie's suggestion is right on track! You already have your domain name ( http://www.ernestbuckley.com ) that you forward to:
    http://web.mac.com/ernestbuckley/iWeb/ernestbuckley/Welcome.html
    If you made another parallel site with the different design and called it "ernest2", all you would have to do is to switch your forwarding to:
    http://web.mac.com/ernestbuckley/iWeb/ernest2/
    You can continue to edit both sites and when you want to switch sites, just change your forwarding again to the other address.
    BTW, if you want to start another site, you might consider using a program called "iWebSites" to help you manage your sites in separate Domain files. That way you keep them completely separate from one another and maintain the ability to edit and publish them independently of one another. Here is the URL for more info...
    http://mistergregg.com/cocoadrillosoftware/
    Let me know if you any other questions...

  • Need user define function for the message  mapping structure

    Hi All
    I am new to XI.I need the java code for Udf for the following structure.
    i have two input and one out put as error.
    order_nos----
    user define function-------error message
    order_details----
    num of orders---- i.e. 10
    order_details------ i.e. whole order records details
    1.i have to compare the 1st  input with 2nd one means if the ist input contain 10 means there are 10 orders in 2nd input.if not then i have to give error message .
    2.then i have to check the fields in 2nd input has no null values.if no values the output will be error message.
    Edited by: Rohit Kumar on Dec 18, 2008 4:43 PM

    Hi Sudhir
    thanks for your continues help.i need some help so that i can fulfill my requirmrnt
    this is my message mapping xml.
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:methodCall_MT xmlns:ns0="http://www.dfdsf">
      <num_orders>10</num_orders>
      <test_mode />
    - <order_x>                        ( which is order details)
      <order_id>t78tyu8t</order_id>
      <order_date />
      <mfg_id />
      <catalog_id />
      <first_name />
      <last_name />
      <recipient />
      <message />
      <address1 />
      <address2 />
      <address3 />
      <city />
      <state />
      <zip />
      <country />
      <country_code />
      <phone />
      <subtotal />
      <tax />
      <shipping />
      <total />
      <shopatron_total />
      <fulfiller_total />
      <shipment_id />
    - <additional_info>
      <in_store_pickup />
    - <express_shipping>
      <express_shipping_flag />
      <express_shipping_text />
      <express_shipping_arrival />
      </express_shipping>
      </additional_info>
    - <discount>
      <discount_description />
      <discount_percentage />
      <discount_total />
      </discount>
      <lang_id />
      <currency_id />
      <packing_list />
      <num_items />
    - <items>
      <item_id />
      <quantity />
      <price />
      <part_number />
      <fulfiller_total />
      <shopatron_total />
    - <options>
      <option_x />
      </options>
      </items>
      </order_x>
      </ns0:methodCall_MT>
    this my mapping where under one element number elements are there.when i am excuting the code to check the null value its always giving the there is null val but i have filled evrything.its due to first its checking the order_x and which will be always null.uder this all data will be filled.please suggest what to change in the udf.the code  given by u is working fine but its failing in this scenario because it getting the parent filed is null.

  • Is ios 5.1.1 designed for the 3gs 16gb

    hi there, im new on here please can you help, is ios 5.1.1 ok and designed to run fine on the 16gb 3gs?

    Some people say it slows down performance but it isn't available for download on the 3G but is for the 3GS so it is designed to run on that phone

  • Tables for Service Desk Org Structure

    Dear Colleagues,
    Can anybody tell me what is the name of tables for Service Desk Org Stsructure
    in ppoma_crm we define all the support teams/ org units. When defined it creates Id also like for example: I have defined MM Support Teams as Org Unit for this the ID is  O 50000011.
    I need the table name where these deta is saved
    Regards
    Praveen K
    Edited by: PK on Apr 8, 2010 1:41 PM

    Hi PK
    The data was stored in tables HRP1000 and HRP1001.
    Regards Andreas

Maybe you are looking for