Alternate solution for Refurbishment Process without split valuation

Hi Experts,
We are implementing SAP PM module. We want any alternate method for Refurbishment process ( Internally processed inside the plant) without activating the split valuation . Is it possible ? If possible, please suggest the process .
Thanks in Advance.
VT

No suggestion received, I am closing this.
regards
VT

Similar Messages

Is there any alternate solution for MDM setup without following Device Enrollment Program (DEP) ?

Hi,
Is there any alternate solution for setting up the MDM Process, without following the Device Enrollment Program (DEP) and managing the devices by creating our own setup controlling through the server, Please let me know.
Thanks for the help.

Finally I found the solution for the MDM, after doing some research work with the Apple Configurator, iPhone configuration utility and came across with the Profile Manager after installing Mac OS Server and able to manage, configure, remote access and send the commands using push notifications.

Can we maintain two values for one material a plant without split valuation

Hello Guru's,
We have a situation, we use MOVING AVERAGE PRICE in accounting view 1. Without split valuation.
The actual issue is, we receive, damaged material from a customer with a "0" value, and we send the material as it is, to a vendor with a "0" value.
The vendor, sends us back the repaired material with a value, say "10" (and this keeps changing).
Is it possible, to have Non Valuated Stock and Valuated Stock within the same Plant, for Material "A".
And it shouldn't affect the MAP. Also, we don't want to have Split Valuation.
Please help.
Kashi

if i am getting your scenrio correctly then i will suggets u to maintian the material master with moving avreage price control indicator then
case1> gr from customer at o rs
use the tcode mb1c and movement type 511
as it is evaluated at MAP hence only material document genrated no accounting document
well tried to realize your scenerio but it is not possible to do that
as MAP is going to get effected as a result of valuated good recipet
u need to go for separate material code then transfer good from non valuated to valuated one using tcode mb1b and movement type 309 or use split valuation

Work around/Alternate solution for Oracle error ORA-01460 and ORA-02063

After the installation of Oracle.DataAccess version 2.111.7.20, I get the following error.(the code worked fine with Oracle.DataAccess version 9.2.0.700 )
I have attached the error as well as the sample code.
ORA-01460 and ORA-02063 are known bugs in the new ODP but would like to know if there is any Work around/Alternate solution for this problem(other than
the use of stored procs)..
Thanks!
Error:
ORA-01460: unimplemented or unreasonable conversion requested
ORA-02063: preceding line from BSREAD_STAGINGRO at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, Boolean bCheck)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader(Boolean requery, Boolean fillRequest, CommandBehavior behavior)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader()
SampleCode
private bool isValidFieldData(string clientName, string fieldNumber, string uniqueID, string clientID)
using (OracleConnection mBSConnection = new OracleConnection(mBSConnectionString))
OracleDataReader oRdr = null;
OracleCommand Valid_FieldData_Command = null;
try
Valid_FieldData_Command = new OracleCommand();
Valid_FieldData_Command.Connection = mBSConnection;
Valid_FieldData_Command.CommandText = "SELECT uniqueid FROM EXTDB.BSData WHERE agencyid = :agencyid and agencyname=:agencyname AND fieldnumber =:fieldnumber AND uniqueid = :uniqueid";
Valid_FieldData_Command.Parameters.Add(":agencyid", OracleDbType.Varchar2, 255).Value = agencyID;
Valid_FieldData_Command.Parameters.Add(":agencyname", OracleDbType.Varchar2, 255).Value = agencyName;
Valid_FieldData_Command.Parameters.Add(":fieldnumber", OracleDbType.Varchar2, 255).Value = fieldNumber;
Valid_FieldData_Command.Parameters.Add(":uniqueid", OracleDbType.Varchar2, 255).Value = uniqueID;
mBSConnection.Open();
oRdr = Valid_FieldData_Command.ExecuteReader(); ->Error occurs here
The error occurs whenever the length of any of the parameter is increased. But there is no specific length where it is breaking down.
For example in this case, it breaks down with the given error if
agencyID > 8
agencyName > 6
fieldNumber > 9
uniqueid > 6

The problem was mapping input parameter type.
VARCHAR2-type mapping input parameter works with String-type PF parameter. But CHAR-type won't.

Alternate solutions for subreport within a subreport

Hi,
There is a master report say R1. R1 needs a subreport R2 which has a graph as a subreport(R3). As the idea of subreport having another subreport is not supported in the Crystal reports, we need an alternate solution for the problem. Any help is much appreciated.
Thanks,
Shayari

can you be a bit clearer, are you stating that you have a main report which has a sub report currently and you need another subreport to display the graph from subreport that already is embeded in the main?
you can place a sub in a sub, but you can create more that one sub.
if you only want the data from the sub to use within a graph in the main rpt than i would pass shared variables from the main to the sub and use them in a graph(if you can)

541 & 543 Mvt for Sub Contract Process with Split Valuation

Hi all,
We have activated SPLIT VALUATION for sub contracting in ECC 6.0
We have clasified into 3 Valuation Catergories as New,Repaired & Faulty.
The logic & naming convention of the materials are
New Material : C1
Repaired : C2
Faulty : C3
The details are as.....a faulty material can be converted into Repaired by the external Vendors,for which we raise a PO and do MB1B with 541 mvt type with ref to this PO.
The Acing Entries are
PK      GL Code        Material     Value
99         117000         C3            10
89         117000         C2            100
93         600530                           90
While in process the GR w.r.t the above mentioned PO ,we are getting 6 accounting entries (which is delivered by Stand SAP) they are as
PK      GL Code       Descrip     Value
89         117000        Stock        100
96         117400        GR/IR         150
91         600530        Sub Cont    100
86         600863        Sub Service 150
99         117000        Stock          100
81         600530        Sub Cont     100
Can any please explain me how the system calculates the above Accounting Entry.
We are confused why the system calculates ( entries) for the 91,81,86 Posting Key.
I have uderstood that PK 89 for goods inward, 96 is for GR/IR clr, 99 is for reversal of 541 mvt type.
Other 3 entries i have the confusion ........
Can anyone please guide me and explain in detail how ,why andfrom where the system is calculating the entries.
Hope that you will help me in this regards
Take Care
God Bless
Regards
Praveen.
Edited by: Praveen Singh on Sep 16, 2008 8:07 PM

Go to OMWB and click on simulation and here enter you mateirla number, plant and Mtype 101
Then click on account assignment
you will see all the entries
Posting Lines Text              VlGCd AGC VCl   PK Acct D      PK Acct Cr
Gain/loss from revaluation      -e-   -e- -e-   83 440700      93 440700
Inventory posting               -e-   -e- TRA1 89 130000      99 130000
Incidental costs of external a -e-   -e- -e-   86 460820      96 460820
External activity               -e-   -e- TRA1 86 460960      96 460960
Change in stock account         -e-   -e- TRA1 81 460820      91 460820
Purchase offsetting account     -e-   -e- -e-   40 --Missing- 50 --Missing-
Purchase account                -e-   -e- -e-   40 --Missing- 50 --Missing-
Materials management exch.rate -e-   -e- -e-   40 440600      50 440600
Cost (price) differences        -e-        TRA1 83 440000      93 440005
GR/IR clearing account          -e-   -e- TRA1 86 210005      96 210005
Inventory posting               -e-   -e- TRA1 89 130000

Estimation process while split valuation is active

Hello friends
Is there other configuration required when materials valuated using split valuation .. ?
while estimating the cost of finish product , other components like semi-finish materials , and raw materials are valuated at split valuation . how system will know which price it has to pick .
Examlpe :- one semi finish material valuated at 3 levels 01, 02, 03 .
in material master without valuation type price control is V      233.00      procurement type X
IN valuation type 01 price control V                                               250.00
but in valuation type 02 price control is S                                     150.00
and in valuation type 03 price control is S                                    180.00
now while estimating cost for finish product , which price system will consider .
i think i have to use valuation price with user exit - setting available in okk4 valuation variant
Thanks in advanvance .
sachin s. joshi
Edited by: sachin on Mar 30, 2010 3:44 PM

HI,
the main question (from your first posting) is: "how system will know which price it has to pick . "
As BOM does not contain the information which split-valuated segment of a material should be considered during plan cost estimation (only the material is known, but not the batch) its up to you to define the rules for which valuation-segemnt price has to be picked.
Best regards, Christian

Price change for Material Maintained with Split valuation

Hi Gurus,
Scenario is like this :
Material with Valuation type is : Rs.50.
Material W/o Valuation type is : Rs. 0 ( This is done at the time creating material master).
Now i want to correct Rs.0 to Rs.40.
When i try to change price through MR21, system is asking to input valuation type.
Is it not possible to change price for material W/o Valuation type (ie blank one), if material is Split Valuated ?
Thanks

Hi,
if the materila is split valuated then u have to enter valuation type because inthe accouting view you hav edefined valuation type and at that level only it stores the price.
I think you wants to change the price at valuation category level , if this is so then it gets updated automatically thru prices maintained at all the valauation type levels.
Hope it clarifies ur doubt.
reward if useful
Rohit

Alternate solution for Field Exit

Hi All,
Is there any other way to get the functionality of Field Exit?
According to my requirement, I have to populate some values in a table control based on the value entered in a field.
Please tell me a solution for this.
Thanks,
Nandhu.

Hi,
As per your requirement you want to populate some values based on the value of some other field.
You can try for EXITS or if the field from which you want to use the value and the other fields which you want to populate are input fields then you can as well use field exits.
Variables declared globally for storing values in the top include of the function group for field exits can be accessed in other field exits. So you can make use of this functionality.
Thanks.

Any solution for swf file without url link embedded?

As a long shot just thought I would ask.
Received a swf file which needs to be linked to a url address BUT the company that produced it has not embedded the link in the .fla file!!!!!
In the past I seem to remember there is not a way to link the swf via html or maybe so but only via javascript or some complex solution. Is this still the case or has someone found an elegant solution to the issue in recent times?
Thanks
Os

Ken Binney wrote:
Hi Os -
Can you get the fla file?
Hi Ken,
Unfortunately not. If I could I don't think it would be much help as I'm out of touch with Flash. I used to dabble around in Flash a bit years ago but didn't persist as I thought it required a bit more time to really get to know than I could give it.
I know it's a relatively simple procedure to add a getURL frame to the .fla file as I done it myself in the past. Not sure why whoever did it hasn't included the link as it's an advert to attract people to a certain url.
I guess they will just have to sort it themsleves.
Thanks for replying. Just though things move quickly and some genius might have discovered a way to add a link without having to resort to the .fla file.

Any solutions for "Export process terminated unexpectedly [11]" problem?

Hey guys,
I'm trying to simply use Quicktime Pro (Version 7.6.6 Build 1632) to enable the "Fast Internet Start" feature of a 640 x 480 video H.264 video. It uses 16-bit Little Endian for audio, if that's of any help.
Anyway, like lots of other users with this same exact problem, I make the changes in the "Export" dialogue (in this case, enabling "Fast Internet Start" and lowering the audio quality a bit), and the little status indicator goes away and "Export Process Terminated Unexpectedly {11}" appears in its place. Has a definitive answer been found for this problem?

Similar issue here when exporting AVI files captured from Canon G9 to iPod.
QuickTime Pro quits with: Failed: process terminated unexpectedly (11).
Oddly, if I start from a power off and run QTime the error does not occur.
Of course powering off for every export is a real PAIN IN THE Axx but it is a work around on this end.
I have yet to try 3rd party software but this is error occurs with Quick Time Pro Ver 7.5 build 149.5.
Sad

Infotype updation- alternate solution for FM HR_INFOTYPE_OPERATION.

Hi Expert ,
Right now i am using FM HR_INFOTYPE_OPERATION to insert data to infotype 19.
Problem i am facing is data to be inserted is very large and this takes lot of time.
Is there any other FM which updates infotype in mass i mean using internal table? Since in this FM cant pass internal table so i have to call this FM for every PERNR.
Thanks & Regards ,
JIgar Thakkar.

Hi Jigar
As suggested by Rahul, Use the FM: HR_PSBUFFER_INITIALIZE. This will improve the performance of your code to a great extend. I would personally, use HR_MAINTAIN_MASTERDATA or HR_INFOTYPE_OPERATION to update the infotype 0019. However, both are buffering the data and doing some EXPORT to memory. The result of this is that after a few hundred calls to HR_INFOTYPE_OPERATION or HR_MAINTAIN_MASTERDATA, the buffer gets big enough to impact the performance of the function module. After thousand of updates with HR_INFOTYPE_OPERATION or HR_MAINTAIN_MASTERDATA, each call will take many seconds and your ABAP program will be unusable. Because you run it for high volumes only in the SAP production system, thatu2019s when youu2019ll really see the impact.
The solution is simple. Call this function module to clear the buffer.
CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
Hope this helps.
Harsh

Best practices for batch processing without SSIS

Hi,
The gist of this question is in general how should a C# client insert/update batches records using stored procedures. The ideas I can think of are:
1) create 1 SP with a parameter of type XML, and pass say 100 records at a time, on 1 thread. The SP reads the XML as a table and does a single INSERT.
2) create 1 SP with many parameters, that inserts 1 records. I can either build a big block of EXEC statements for say 100 records at a time, or call the SP 1 and a time, on 1 thread. Obviously this seems the slowest.
3) Parallel processing version of either of the above: Pass 100 records at a time via XML parameter, big block of EXEC statements, or 1 at a time, and use PLINQ to make multiple connections to the database.
The records will be fairly wide, substantial records.
Which scenario is likely to be fastest and avoid lock contention?
(We are doing batch processing and there is not a current SSIS infrastructure, so it's manual: fetch data, call web services, update batches. I need a batch strategy that doesn't involve SSIS - yet).
Thanks.

The "streaming" option you mention in your linked thread sounds interesting, is that a way to input millions of rows at once? Are they not staged into the tempdb?
The entire TVP is stored in tempdb before the query/proc is executed. The advantage of the streaming method is that it eliminates the need to load the entire TVP into memory on either the client or server. The rowset is streamed to the server
and SQL Server uses the insert bulk method is to store it in tempdb. Below is an example C# console app that streams 10M rows as a TVP.
using System;
using System.Data;
using System.Data.SqlClient;
using System.Collections;
using System.Collections.Generic;
using Microsoft.SqlServer.Server;
namespace ConsoleApplication1
class Program
static string connectionString = @"Data Source=.;Initial Catalog=MyDatabase;Integrated Security=SSPI;";
static void Main(string[] args)
using(var connection = new SqlConnection(connectionString))
using(var command = new SqlCommand("dbo.usp_tvp_test", connection))
command.Parameters.Add("@tvp", SqlDbType.Structured).Value = new Class1();
command.CommandType = CommandType.StoredProcedure;
connection.Open();
command.ExecuteNonQuery();
connection.Close();
class Class1 : IEnumerable<SqlDataRecord>
private SqlMetaData[] metaData = new SqlMetaData[1] { new SqlMetaData("col1", System.Data.SqlDbType.Int) };
public IEnumerator<SqlDataRecord> GetEnumerator()
for (int i = 0; i < 10000000; ++i)
var record = new SqlDataRecord(metaData);
record.SetInt32(0, i);
yield return record;
IEnumerator IEnumerable.GetEnumerator()
throw new NotImplementedException();
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Alternate solution for NAC functionality

Hi Expets ,
In our client setup , they were using the cico NGS 3315 for creating guest accounts . The below are the steps of this process ,
-> Any employee can access corporate web server and can request for guest internet account
->The scripts in the background automatically contacts the guest NAC server with admin username and pwd .
http://NAC DNS name/sponsor/api/GuestAccount.php
->Then NAC will reply the credentials to the corporate web server then it will be forwarded to employees's mail account
But the problem is , the NAC server is down . Hence we want to use the anchor WLC itself to create/authenticate guest accounts . So kindly confirm this also can be done using script automatically..
Thanks ,
Regards,
Vijay

We have replaced the NAC box and configured. But we are getting the below errors when the application is trying to create guest account.Kindly suggest
[Wed Nov 06 15:07:42 2013] [error] [client 10.208.31.121] File does not exist: /guest/www/html/favicon.ico
[Wed Nov 06 15:07:49 2013] [error] [client 10.208.31.121] File does not exist: /guest/www/html/favicon.ico
[Wed Nov 06 15:07:57 2013] [error] [client 10.208.31.121] File does not exist: /guest/www/html/favicon.ico
[Wed Nov 06 15:08:45 2013] [error] [client 10.208.31.121] File does not exist: /guest/www/html/guest
[Wed Nov 06 15:08:46 2013] [error] [client 10.208.31.121] File does not exist: /guest/www/html/favicon.ico
[Wed Nov 06 15:20:50 2013] [error] [client 10.201.20.28] File does not exist: /guest/www/html/sponsor/api/GuestAccount.php\xc2\xa0(http:
[Wed Nov 06 15:21:00 2013] [error] [client 10.201.20.28] File does not exist: /guest/www/html/favicon.ico
[Wed Nov 06 15:21:40 2013] [error] [client 10.201.51.19] File does not exist: /guest/www/html/guest
Regards,
Vijay.

Can you please provide the solution for creating process chain..

Hi Experts,
i need to work on this process chain PC_UN_HR_SAP_PM_TD01, i need to add one more step before DSO load that means delete existing data from DSO
please let u know as soon as possible.

Hi Kavya,
Here you can use proces type: 'Complete deletion of data target content' from Data target administration node.
Here in this process type you need to specify the target of which data to be deleted.
PFB links which specify the creation of Process Chains. You 'll get enough idea from these to modify the existing process chain.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/101bed70-f13d-2e10-e7ad-d5c9dabf4485?overridelayout=true
http://scn.sap.com/people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
Hope this 'll help you to get desired result,
Thanks & Regards,
Pradip

Alternate solution for Refurbishment Process without split valuation

Similar Messages

Maybe you are looking for