Alternate to GLPCA Table
Dear All,
Is there any other table where i can get the cost of each cost element a part form GLPCA table.
As it is taking too much of the time to fetch the data form GLPCA table.
Thanks
NSK
Dear Shashi,
Try FM PCA_ACTUALS_DETAIL
or PCA_ACTUAL_DOCUMENT_SHOW
PCA_SEND_LINES_GLPCA
Regards,
Amit
Edited by: Amit Iyer on Apr 3, 2009 11:39 AM
Similar Messages
-
How to delete some data from GLPCA table
Dear Friends,
We have extracted some data in GLPCA table via the ECPA component. We
want to delete these records ( Doc type and Posting date is known).
However we do not want other data already existing the GLPCA to be
deleted. Is there some Std SAP Trx for deletion of partial/select data
from EIS tables.
Please explain us clearaly how we can delete these records.
Your quick reply for this issue is highly appreciated.
Thanks & Regards,
Naveen Kumar.Hello,
Please check the use of the report ZDELETE_PCA_DATA_BUKRS (mentioned in the SAP note 1174360), to delete totals from GLPCT.
I am not sure of any deletion reports for GLPCA table.
If you open the Source code of this program, you can see the following information :
"This report provides a possibility to delete actual and plan
*& postings on company code level as an alternative for transaction
*& 0KE1."
I do not have much information on this report as, personally I haven't used this anytime. Please run in 'Test Run' mode first and look for the results.
I hope this helps.
Thanks and regards,
Suresh Jayanthi. -
Hello,
Can anyone tell me where to find a functional description of the GLPCA table?
I'm especially interested in the relations between EBELN/EBELP and KDAUF/KDPOS and the meanings of the different values for fields BWART, BLART, ACTIV, REFACTIV, AWTYP.
Kind regards,
CarlosHi Carlos,
Use this link.
http://help.sap.com/saphelp_nw04/helpdata/en/42/e77a8e0e2c6346a0be901408be8781/content.htm
Regards,
Vijay -
GLPCA Table values upload to BO(Business Objectives)
Hi,
When we upload the GLPCA table values to BO, the following error showing
Log:error_07-04-2009_17_07_22_15_8b2d31ab_6f1a_487c_860e_9a608414452f.txt job server: BO:3510
FIL-080104:[dataflow New_dataflow 251[embedded dataflow DF_FICO_GLPCA_BLK_XML Reader EID_2_R3_FICO_GLPCA_BLK
A column delimiter was seen after column number <102>, for row number <1220237> in file <D:/temp/F_GLPCA.DAT>. The totla number of columns defined is <102> so a row delimiter should be seen after column number <102> Please check the file for Bad data or redefine the input schema for the file by editing the file format in the UI.
How to solve the above issue and what is the actual problem?
It is very urget.
Thanks in advance应该是有乱码!
There should be garbled! -
HI Experts,
I displayed GLPCA table for my G/L account.
Under this report i am getting one filed named as ACt with values PRC5(create profit center document),PRC4(transfer balancesheet item prcr).
can any one explain me what is the difference between PRC5 and PRC4?Hi,
Thanks for your reply.
How to display document posted in doc 9ke0?
How to know that whether my user posted document by using only 9ke0?
Can you list out that transaction codes which will hit the postings to activity PRC5?
regards,
VANI. -
GLPCA Table taking too muchtime
Hi,
In My GLPCA table around 70 lacks entries are there.When iam cancelling any document its taking too much time.is it possible to do only glpca table archiving or i have to check any abap code.guide me for the same.
ThankuHi,
Just try this option as it has worked past:
A new index with the fields RBUKRS and AUFNR will improve the
performance significantly!!! Note 565582
Thank you,
Tilak -
Increasing the Performace of GLPCA Table
Dear All,
Is there any way to increase the performace of GLPCA table
Regards
VSKRHi,
It depends on your SAP release. The easiest way to see if it's possible is to go to OSS and type 'GLPCA performance'. There are several notes regarding this issue, but only some could be reolevant for your current SAP release.
Regards,
Eli -
Programs which can trigger GLPCA table entries
Hi SAP Community,
I am looking for a complete list of programs which can trigger GLPCA table entries. I am currently in the process of running related transactions manually, but to be on the save side, I would really appreciate the feedback from you guys.
Thanks in advance for your support.
Cheers,
ChrisHi,
You can find the programs where the table GLPCA is being used. For this use transaction code SE11 and enter the table name GLPCA and click on the icon where used. A pop up window will be displayed and you can click on Programs only. This will display all the Programs where the table GLPCA is used including any Z programs developed in your system.
Thanks
Murali. -
GLPCA table not getting updated correctly for VBUND
Hi All,
I have come across one issue that the value of trading partner field (VBUND) in table GLPCA are not getting updated correctly for document type KP.
In vendor master this field has different value versus it is showing in GLPCA-VBUND.
Does any one knows about ?
Thanks for your help on it.
Regards,
ManojHi Sridhar,
Thanks for your response on it.
This note is not applicable for our system as we are working on 4.0B with support pack 52.
Also we are getting this worng update of this field (GLPCA-VBUND) while doing MR11 creating document with doc. type KP. This value is not picking from vendor master (LAF1-VBUND) and randamly picking any value. Not sure from where ?
Please advise your thought.
Thanks,
Manoj -
hi gurus,
i need to find a relation between profit center and G/L account to do same reporting on charges by profit centers.
in table GLPCA i have the fields i need, but i have a question: are all the charges traced in this table (GLPCA) ? in other words are all the vendors invoices present in this table.
Thank you.Only for those entries in which profit center is assigned.
Eg :Say expenses or revenue for which profit center is assigned directly. only the expenses line item(i.e Dr) or revenue line item (i.e CR) alone will be there in GLPCA.
But in BSEG you can find both the entries(Dr & Cr) for the same doc, which you cant find in GLPCA.
Hope you understood.
else revert
Reg
Sujai -
Hi,
How to link the table PNWTYH and GLPCA?
Regards
SBUHi,
Check the following procedure for getting relationships between tables.
1. Use SQVI transaction,
2. Create a View
3. Enter title,
4. Choose the Data source as Table Join
5. Now use Insert table option.
6. And insert the tables which you want. It will propose the relation between them.
Thanks
Nitesh -
GLPCA table fetch - time out issue
Hi,
I have a situation in which one of my business user is facing a TIME OUT in RCOPCA02 report in the below piece of code.
SELECT (tab_fields) FROM glpca
CLIENT SPECIFIED
PACKAGE SIZE packsize
APPENDING CORRESPONDING FIELDS OF TABLE i_glpca
WHERE rldnr IN rldnr
AND rrcty IN rrcty
AND rvers IN rvers
AND kokrs IN kokrs
AND rbukrs IN bukrs
AND ryear IN ryear
AND rassc IN rassc
AND hrkft IN hrkft "note 550972
AND sbukrs IN sbukrs "note 550972
AND shoart IN shoart "note 550972
AND sfarea IN sfarea "note 550972
AND racct IN racct
AND rprctr IN prctr
AND sprctr IN pprctr
AND poper IN poper
AND drcrk IN drcrk
AND activ IN activ
AND rhoart IN rhoart
AND rfarea IN rfarea
AND versa IN versa
AND eprctr IN eprctr
AND afabe IN afabe
AND rmvct IN rmvct
AND docct IN docct
AND docnr IN docnr
AND stagr IN stagr
AND rtcur IN rtcur
AND runit IN runit
AND refdocct IN refdocct
AND refdocnr IN refdocnr
AND werks IN werks
AND rep_matnr IN repmatnr "RDIP40K020663
AND rscope IN rscope "RDIP40K020663
AND rclnt IN rclnt. "dirty trick to mislead DB-optimizer
packsize is set to 1000
But when I try to execute the same using the same variant as used by user I am able to get the output in less than 2 mins. The maximum runtime of a program is set as 900 seconds(which I understand is always same across all users). The issue of TIME_OUT is faced by that particular user only.
My SAP system is SAP_APPL46C. Latest support package implemented is SAPK-91404INDMIS.
What can be the issue? Please suggest.
Regards,
ChinmayYou should run ST05 in parallel with both you and the user with the problem and see what the differences are in the plan.
You cannot get a good answer with the data you have provided.
Please see Please Read before Posting in the Performance and Tuning Forum before posting
Rob
Edited by: Rob Burbank on Sep 30, 2011 9:15 AM -
Hi,
I need script for table alternate shading (see below screen shot). with input value (ex: shading starts from 4th, 5th, 6th row etc...),
Once the cell style is applied, InDesign Alternate shade option is not working. so i have applied manually for all the tables. Please suggest.
Regards,
VeluFields are moved from your program to the screen when the field names match. There is no explicit transport command needed.
I do not think that the TABLES command is considered obsolete when used in screen programming. That is the only time that I use it. There was some training material in regards to the TABLES command being required for proper transport between the program and the screen. I do not know if this has changed with 4.7. -
How to have alternate colors in table component?
Hi everyone,
Using the jsf data table, you can easily set the rowClass to set alternating row colors.
I am sure it is possible to do the same using Sun's Table Component. Please share how???
I looked in the theme css but in vain!!!
Thanks!Hi,
Please check out the blog entry titled "Creator: How To Highlight Specific Data Table Rows" by Tor, one of Creator's engineers. This is available at:
http://blogs.sun.com/roller/page/tor/20050113#creator_how_to_highlight_specific
Hope this helps.
RK -
Data fetch from table GLPCA taking long .
Hi Friends,
I am fetching five fields from GLPCA table and i have RACCT and RPRCTR ( account Number and profit Centre res ) in the where condition. neither of these field is the primary key of the table GLPCA. I have around 161096,482 entries in the GLPCA. It takes around 20 min to fetch the data. can you guys think of some method so that it works faster.Hi Vidya,
The time utilization is due to the way data base is been accessed. Just think that you are selecting same data in SE16 with 200 hits. See how that behaves. If you find its Ok(i.e. around 1/2 mins) go for open cursor logic. Check this syntax and change the code accordigly and try:
OPEN CURSOR w_cur1 FOR
SELECT ktabg vkorg ktaar ktaer kunnr
vtweg spart
FROM vbka
WHERE ktabg IN so_ktabg AND
vkorg IN so_vkorg AND
kunnr IN so_kunnr AND
ktaar IN so_ktaar AND
ktaer IN so_ktaer.
DO.
FETCH NEXT CURSOR w_cur1 INTO CORRESPONDING
FIELDS OF TABLE it_vbka2 PACKAGE SIZE 200.
IF sy-subrc NE 0.
CLOSE CURSOR w_cur1.
EXIT.
ENDIF.
ENDDO.
It behaves just like Select ... Endselect. The most important thing here is the Pakage size which you have to decide based on the SE16 results. Also please mind that if the Package size is less, number of times it hits the DB is high, reducing the efficiency thereby.
Regards & Thanks,
Anand
Maybe you are looking for
-
I cant get my messaging to work on my ipod touch...can you help me?
how do i get the messaging to work on my ipod?
-
Badi for purchase requisition and stock transfer order
Hi, Could anybody please tell the BADI to update the item details (dates etc) in the 'Purchase requisition' and stock transfer orders. I could find ME_PROCESS_REQ etc but could not locate the methods to modify the item level data. Thanks & regards, R
-
How do I create a .dll?
When I select Project -> Add Reference -> Solution -> Browse ... it wants a .dll, .tlb, etc. Perhaps I need to convert my Library.cs into a Library.dll? How do I create a .dll? bhs67
-
Group addresses not added when sending email - only group name
Just helping a friend use Thunderbird on a new PC with Win 7 Prof. Previously he used Outlook Express under Win XP. Downloaded latest version of Thunderbird. Imported old wab file as suggested using "morefunctionsfor..." . The old (complete) address
-
Update Drop Down based on selection in Option group
Good afternoon all- I've got an option box ('PanelStatus') with two options: "Panel" (value of 1) and "Non-Panel" (value of 2). On the form where this is located, I have a drop down box filled with names. These people on this table are either Panel