Alternate workcenter or resources

Dear all
"During conversion of planned order to Production order the system should not allow to do it if 
found Capacity oveloaded."The system should also proposed some alternate workcenter or resources , which is not oveloaded
How i can map this scanerio in STD SAP?
thx

Dear
Please note that when you create production order, activate the availability check in the order type in whcch give the capacity profile and activate availability during creation.(uncheck the check box - no check in the subpage capacity)
Then when you create, system will stop the creation if the capacity is not availabile.
pl come back if required

Similar Messages

  • Pp Scenerio

    dear all
    1) My scenerio is MTO
    2)"During conversion of planned order to Production order the system should not allow to do it if 
    found Capacity oveloaded."
    3)The system should also proposed some alternate workcenter or resources , which is not oveloaded
    4)"The system should also proposed ,how much to produced inhouse and outside(subcontarcting)
    considering the workcenter or capacity availibility."
    How i can map this scenerio in sap
    plz guide me urgent

    Hi Avinash,
    In OPJK maintain checking control for your Plant and order Type.
    Select your order type and your business function 1 or 2.
    1 is for order creation.
    2 is for release.
    Make sure the following setting to control the order if missing parts found:
    1.Remove indicator mark in No availability check
    2.Indicate Check capacity availability when saving the order.
    3. Colle Conversion: 3- No creation if there is insufficient capacity
    During conversion of planned order to Production order the system should not allow to convert if capacity not available.
    Through capacity planning it possible to map  your other requirement.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Jul 23, 2008 12:06 PM

  • Relation between maintainance order and capacity plannig

    Hi
    If i create maintainance order for workcenter or resource that has been used in capacity planning in production process then is it going to affect capacity value. if it is then how and where?
    Thanking you.

    Hi Shriram,
    Well as your thread says there is a lot of impacts in different ways say:
    Cases:
    If there is a order to deliver it with in two days but there is a sudden customer order to mfg and deliver it in one day then we have to check the capacity to produce the second order as well. So, at that time we do the capacity leveling & evaluation to adjust and to produce the orders OK.
    So, in the same way we can have n number of orders which will come and there will be short fall of capacity OK.
    I hope it helps you.
    Regards,
    Madhu.G

  • Photoshop Elements Download Failed. No Assistance from Adobe

    I paid for Photoshop Elements and Download Failed. No Assistance from Adobe

    Try using a different browser to download the file. 
    Also,
    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
    Alternate Trial download resource:
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 12:
    http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html

  • Download adobe creative suite 6 from adobe website instead of using CDs

    I do not have a cd/dvd drive on my laptop can I just download the programs from the site and if so how?

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    Alternate trial download resource:
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • Solutions required for ODs(Different operations)

    Hi Experts
    Since  1st September, client has  implemented the principle of parking  posting OD(Different operationals). However, the parking implementation does not concern the large number of documents to be entered:
    -The banking accountant in charge of entering the cash receipt documents,
    -The accountant in charge of personnel accounts (expense notes, loans, advancesu2026.).
    In this context:
    1.Is it possible for you to provide us the complete list of transactions that can allow passing the ODs (FB01 Type),
    2.Is it possible for you to let us know if we can use other types of documents for the cash documents and the personnel documents (expense note, loansu2026) to differentiate them from the SA and AB types for a better OD monitoring,
    3.Is it possible for you to let us know if we can use the other types of documents for the cash registers and the personnel documents (expense note, loans,u2026) to differentiate the types SA and AB for a better monitoring of OD,
    4.Is it possible for you to let us know the transaction that gives us a report of the OD documents with the following minimum details (parked by, validated by, document date, amount, document label, impacted accounts),
    Above said four are the user requirements, kindly provide possible solutions ASAP
    Thanks in advance
    Lakshmi kanth Reddy

    Hi,
    Check whether the solution given in the below note resolves your issue
    Unable To Schedule Simultaneous Resources With Alternates For Each Resource (Doc ID 865962.1)
    Regards,
    Divakar

  • How to create a 'functioning' Multi angle track?   - Help Please

    hi all,
    i've spent almost three days working all the bugs out of a dvd with 10 multi angle tracks
    (thats 10 different tracks with two different angles each).
    after hours upon hours of tweaking i have it working fine in DVDSP simulator (perfect really, everything is so sweet!) only when I burn/build/format the project the multi-angle functionality is lost.
    i've tried the dvds on two different players, and two different computers, even the same mac i built the DVD on and the second angle just doesn't seem to exist?
    can anyone tell me if there is a setting i'm missing or... is the switching between angles something you can only do inside DVDSP simulator... some kind of bad joke on apple's part???
    please please pretty please - help!!!
    Message was edited by: claudia 639

    claudia 639 wrote:
    hi all,
    i've spent almost three days working all the bugs out of a dvd with 10 multi angle tracks
    (thats 10 different tracks with two different angles each).
    after hours upon hours of tweaking i have it working fine in DVDSP simulator (perfect really, everything is so sweet!) only when I burn/build/format the project the multi-angle functionality is lost.
    i've tried the dvds on two different players, and two different computers, even the same mac i built the DVD on and the second angle just doesn't seem to exist?
    can anyone tell me if there is a setting i'm missing or... is the switching between angles something you can only do inside DVDSP simulator... some kind of bad joke on apple's part???
    That's a very complex project to cut your multiangle chops on. Make a copy of the project and discard all but one of the tracks so you have something with fewer resources to juggle.
    I've done dozens of multiangle projects in DVDSP over many years since the featgure became available in, I think, DVDSPv2.5 or so, maybe v3. They all have worked without any hitches so we know there's nothing wrong with the software. There are two ways you can use the option but the most reliable is to have all angles exaactly the same length, to the frame.
    Assuming you have taken into account the bit rates required to hold all of your video assets on the single disk, I cannot think of anything that would disable or prevent multiangle from working since it is part of the basic DVD specification.
    If the alternate angle's resources are not being burned to disk, the multiangle function will not be active. You might be able to view the processing log to see if the names of your b-roll files are being processed at all.
    bogiesan

  • Epicor 10 -- Worth the upgrade?

    Jeff,
    We have been live on 10.0.700.4 for 2 weeks now. We went from 9.05.606a.
    Upgrade week was hellish...but its pretty solid by now. We only have about 20 tickets open on SW.
    Users love it compared to 9. MUCH faster in just about every aspect. I love the upgraded infrastructure as a sysadmin because now I have more flexibility with my servers. ..and managing it seems easier.
    Going from that old of a version will require much work....and it will also depend on how much you have customized. I think that Epicor has a version 8 upgrade tool.
    I don't know how many users/sites/plants/DB size you have...but we are about 60 users, 40 MES, 1 site, one plant, and a 25GB DB.

    Version 10.1 is coming out, so I'd wait for that release. I believe you'll have to do the Workcenter to Resource conversion. Be skeptical of their sizing requirements, as it's a lot of overkill. I'm not familiar with version 8.03 really. Is it full progress or SQL? Our data conversion from progress made our database grow 500%. One thing that got me was the SQL core licensing costs. Was getting conflicting information on how much would be needed and we overbought. I'd start off with a 2 or 4 core license and move it up if you dedicate more cores to your SQL server.

  • Alternate Capacity resource

    Hi everyone
    In pharmaceutical industry we validate our Products on 2-3 different machines,
    However in Reciepe we have to maintain 1 standard validated machine as Resource in operations
    Is there any method of Capacity Evalution in SAP-ECC-6, where you can Link for a Finished goods 2 machines to evaluate the capacity reqirements. Something like Alternate machine for same operation.
    Can pooling of capacity be used here ? and how?
    Creating alternate Production versions is of little help since all planned orders will be generated with 1st assigned Receipe and flow will be with 1st production version

    Hi,
        It is true that production version not support much in this case & if u want to make some quota or other thing like lot sizes or valid period then it again not work because i hope u want some thing like,
    your capacity will be total capacity of all machines & first itgo to a specific machine & when its capacity fully loaded then go to other & then other.
    so for taking total capaity in picture u  need to make workcenter for all thses machine but it will resolve ur purpose of getting each machine wise load, u can do one thing.
    Make a work center for all machine, in capacity tab just take no of individual eq to no of machine put work center capacity so ur working hour become multiple of one machine hour.
    now just go to of upper line then individual capacities , here u can put machine name & in desc u can put share in work center capacity also.
    now for information just go process order operation detail & in split tab give machine name & load from operation qty.
    hope this all work & u get report also with capacity (machine) wise.
    Thanks

  • I am trying to update itunes but keep getting 'The feature you are trying to use is on a network resource that is unavailable - Click OK to try again, or enter an alternate path folder containing the installation package 'itunes64msi' in the box below'. ,

    I am trying to update itunes but keep getting 'The feature you are trying to use is on a network resource that is unavailable - Click OK to try again, or enter an alternate path folder containing the installation package 'itunes64msi' in the box below'.
    I am unable to install and also i cannot uninstall itunes, can anyone HELP PLEASSSSSSEEEEEE!!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • When I try to update itunes, I get the following:  The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the box..

    When I try to update itunes, I get the following:  The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the box below.
    This leads me to another dialog box that says:  The file .......is not a valid installation package for the product iTunes.  Try to find the installation package iTunes64.msi in a folder from which you can install iTunes.
    That doesn't work either.  What to do?
    Dean

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?

    How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?
    < Edited by Host >

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • After trying to run the iTunes automatic update, I got this "The feature you are trying to use is on a network resource that is unavailable." Click OK to try again,or enter an alternate path to a folder containing the installation package 'itunes.msi"

    After trying to run the iTunes automatic update, I got this box on my pc "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi" in the box below.. I ran a search for the file, and entered that into the box, to no avail. Then I launched iTunes and clicked on 'check for updates', and was told I had the latest version 11.0.1 I think it is. So, any clue on what to do? Thanks for any and all help.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • My itunes won't work so i tried reinstalling and when it starts an error pops up that says: "the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the insta

    my itunes won't work so i tried reinstalling and when it starts an error pops up that says:
    "the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the installation package 'Itunes.msi' in the box below
    please help, its frustrating

    first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
    next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
           next download itunes. it worked for me hope this is helpful!!
        oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

  • When i try to download the newest version of itunes it says "the feature you are trying to use is on a network resource that is unavailable" and then it gives me an alternate path to a folder containing the installation package for itunes64.mis, help

    when i try to download the newest version of itunes it says "the feature you are trying to use is on a network resource that is unavailable" and then it gives me an alternate path to a folder containing the installation package for itunes64.mis, help

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for