Alternating row colors inside netui-data:repeater?

Is there an easy way to make the row colors alternate inside the netui-data:repeater?
I am looking for somthing similar to what happens with the netui-data:grid tag.
A code sample maybe?
Thanks,
John

Hi John,
This article might help:
http://dev2dev.bea.com/products/wlworkshop81/articles/repeater.jsp
"John Hundley" <[email protected]> wrote:
>
Is there an easy way to make the row colors alternate inside the netui-data:repeater?
I am looking for somthing similar to what happens with the netui-data:grid
tag.
A code sample maybe?
Thanks,
John

Similar Messages

Want robust solution for alternating row color, resetting every group

I would like a solution for displaying an alternating row color for my detail rows that resets every group, so that row 1 is always gray.
Our Crystal designer provided this code to me:
@rowcnt formula, suppressed, placed in Detail row:
Shared numbervar rowcnt;
rowcnt := rowcnt + 1;
@resetrowcnt, suppressed, placed in Group row:
Shared numbervar rowcnt;
rowcnt := 0;
Formatting formula, placed in Color in Detail > Section Expert:
Shared numbervar rowcnt;
if Remainder(rowcnt, 2) <> 0 then
color(241,241,241)
else
crWhite
This was working fine for me.
However, it is suddenly not working in one of my reports.
The report does happen to have two groups (rowcount.png).
When the report is run, all rows are colored (rowcount02.png).
This report was previously working fine! I'm not sure what changed.
In any case... surely there must be standard code to do this very standard formatting.
I would be very grateful if someone could post some robust code to accomplish the following:
REPORT DATA IN DETAIL ROW, ALTERNATE ROW BANDING:
- Data in Detail row displays alternating row colors
- Odd rows are always shaded, even rows not
- Banding resets every group / does not continue pattern from previous group
REPORT DATA IN GROUP ROW, ALTERNATE ROW BANDING:
Some of our reports place row data in a group row (just the way it happened).
If you could also modify your code in this case.
Thank you!

Hi Abhilash/Sastry, since I'm going to switch to Sastry's formulas, could you please confirm correctness of the following. I can't actually run this report, I can only provide it to our London office, bit of a lag for testing.
@resetrowcnt:
Whileprintingrecords;
Numbervar cnt:=0;
@rowcnt:
Whileprintingrecords;
if {HedgeDetails.StrategyID} <> previous({HedgeDetails.StrategyID}) and
{HedgeDetails.DealID} <> previous({HedgeDetails.DealID}) then
Numbervar cnt:=cnt+1;
Details section (Suppress):
not(OnFirstRecord) and
{HedgeDetails.StrategyID}=previous({HedgeDetails.StrategyID}) and
{HedgeDetails.DealID}=previous({HedgeDetails.DealID})
Please note: Suppress checkbox is selected AND the above formula is entered.
Details section (Color):
Whileprintingrecords;
Numbervar cnt;
if cnt mod 2 <> 0 Then color(241,241,241) else crwhite

Workshop 8.1 - netui-data:repeater and netui:checkBox

Hi everybody.
How can i use netui-data:repeater and netui:checkBox to build a group of checkboxes ? I need something like Struts "indexed and mapped properties" (http://struts.apache.org/struts-doc-1.1/faqs/indexedprops.html)
I've tried something like this
== FORM ==
public List getSearchResult() {
return searchResult;
public void setSearchResult(List searchResult) {
this.searchResult = searchResult;
}== JSP ==
<<netui-data:repeater dataSource="{actionForm.searchResult}">>
<<tr bgcolor="#ffffff" class="text8b">>
<<td>><<netui:checkBox dataSource="{container.item.selected}" />><</td>><</tr>>
<</netui-data:repeater>>
I can see the values inside this page but when i submit this form, my list is empty (null).
What is the right way of do it ?
Thanks in advance.

Hi Daniel
There are 2 ways you can acheive this.
1) Using something called Pageflowscoped form for this. This will let you use arrays for checkbox group.
The main part will be that you need to define a member varaible of the form at the pageflow level there by the data will not be lost
2) Using Request scoped form like you have now but need to modify the getter method to populate the "searchResult" object.
public List getSearchResult() {
if( null == searchResult){
System.out.println(" Pouplate the searchResult here. ");
searchResult= new ArrayList();
//populate the default values.
return this.searchResult;
More info at:
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/netui/guide/conReqScopedVsPageScopedBean.html
I have a sample with pageflowscoped bean and requestscoped bean that I can send you if you provide your email address.
Unfortunately we cannot attach files in the newsgroup.
Thanks
Vimala

CheckBoxGroup, checkBoxOption and netui-data:repeater

Greetings,
How can I have multiple options (<netui:checkBoxOption>) inside a checkbox group (<netui:checkBoxGroup>) dinamycally, using netui tags?
CheckBoxOption doesn't allow using another tag like <netui-data:repeater> as it's parent.
I really appreciate any help.
Mariano

Tim,
I had a similar issue and I could not find a way via the start index and end index
as you would expect.
However, what you can do is write a method in your JPF and access it via <netui-data:choiceMethod...>
tag.Disdavntage being the repeater tag would still loop through rthe entire set,
but would display only what you want.
<netui-data:repeaterItem>
<netui-data:choiceMethod object="{pageFlow}" method="isLineCounterMaxed">
<netui-data:methodParameter value="{container.index}"/>
<netui-data:methodParameter value="{pageContext.lastLineNumber}"/>
</netui-data:choiceMethod>
<netui-data:choice value="true">
........DIsplay Your Data Here.......
</netui-data:choice >
</netui-data:repeaterItem>
Thanks
Rishi
"Tim" <[email protected]> wrote:
>
Hi,
I am using <netui-data:repeater> tag to display array of object.
This array has 20 elements and I am displaying only 5 elements at one
time and
providing next and previous button to the user.
Can I specify the starting index and the end index in repeater tag so
that I
display
the processing array object values in my repeater tag.

How can I use javascript to access netui data-repeater item?

I have a 2-dim table of <netui: checkbox> using a <netui data-repeater> to interate over a contact email (column) and an event (rows).
          My problem is that I need to have a select all checkbox at the bottom of each column (per email) and be able to select all event for an email (when checked) and deselect all when the checkbox is unchecked.
          I can do it in java page flow but I can't have a page refresh.
          I want to do it on the page with javascript. The problem is that using
          document[getNetuiTagName("aform", this)][getNetuiTagName("email1", this)].checked
          with the "tagId" in each <netui> tag I can't access each iteration of the data repeater (I only get the last one).
          What I need is a reference to each repeater element. I do not know how many rows or columns I will have (based on the data).
          Is there any way to reference the obeject itself in javascript so I can loop through the items in the netui data-repeater?
          This is what is rendered in the html netui mapping:
          netui_names.con1="portlet_2_3wlw-checkbox_key:{actionForm.opts[4].cons[1].selContact}"
          I really want to be able to access this and loop through the arrays for opts (event) and cons(email)
          Here's the code:
          <netui:form action="submitEvents" tagId="eform" focus="">
          <table>
          <tr>
          <td>
          <table id="eTable" cellpadding="2" cellspacing="1" border="0">
          <tr bgcolor="#cccccc" class="BlackHeavy8">
          
          <td colspan="2">Event</td>
          <netui-data:repeater dataSource="{pageFlow.contacts}" defaultText="No contacts configured.">
          <netui-data:repeaterHeader>
          </netui-data:repeaterHeader>
          <netui-data:repeaterItem>
          <netui-data:choiceMethod object="{pageFlow}" method="getAddHeader">
          <netui-data:methodParameter value="{container.item.contact_icon}" />
          </netui-data:choiceMethod>
          <netui-data:choice value="default">
          <td nowrap="true" bgcolor="#FFCCCC"><netui:image src="{container.item.contact_icon}"/>
          <netui:label value="{container.item.contact_value}" defaultValue="Â "></netui:label>
          </td>
          </netui-data:choice>
          <netui-data:choice value="blue">
          <td nowrap="true" bgcolor="#D8EBFE"><netui:image src="{container.item.contact_icon}"/>
          <netui:label value="{container.item.contact_value}" defaultValue="Â "></netui:label>
          </td>
          </netui-data:choice>
          <netui-data:choice value="green">
          <td nowrap="true" bgcolor="#CCFFCC"><netui:image src="{container.item.contact_icon}"/>
          <netui:label value="{container.item.contact_value}" defaultValue="Â "></netui:label>
          </td>
          </netui-data:choice>
          <netui-data:choice value="yellow">
          <td nowrap="true" bgcolor="#FFFFCC"><netui:image src="{container.item.contact_icon}"/>
          <netui:label value="{container.item.contact_value}" defaultValue="Â "></netui:label>
          </td>
          </netui-data:choice>
          </netui-data:repeaterItem>
          <netui-data:repeaterFooter></netui-data:repeaterFooter>
          </netui-data:repeater>
          </tr>
          <tr>
          <td colspan="7">
          <netui-data:repeater dataSource="{actionForm.opts}">
          <netui-data:repeaterHeader>
          </netui-data:repeaterHeader>
          <netui-data:repeaterItem>
          <netui-data:choiceMethod object="{pageFlow}" method="isEvenRow">
          <netui-data:methodParameter type="int" value="{container.index}" />
          </netui-data:choiceMethod>
          <netui-data:choice value="true">
          <tr class="BlackNorm8">
          
          
          <td colspan="2">
          <netui:label value="{container.item.eventName}" />
          <netui:hidden dataSource="{container.item.eventId}" />
          </td>
          <netui-data:repeater dataSource="{container.item.cons}">
          <netui-data:repeaterHeader>
          </netui-data:repeaterHeader>
          <netui-data:repeaterItem>
          <netui-data:choiceMethod object="{pageFlow}" method="getAddHeader">
          <netui-data:methodParameter value="{container.item.contact_icon}" />
          </netui-data:choiceMethod>
          <netui-data:choice value="default">
          <td align="center" bgcolor="#FFCCCC" >
          <netui:checkBox tagId="con1" dataSource="{container.item.selContact}" defaultValue="{container.item.selContact}" />
          <netui:hidden dataSource="{container.item.contact_id}" tagId="conid1" />
          </td>
          </netui-data:choice>
          <netui-data:choice value="blue">
          <td align="center" bgcolor="#D8EBFE" >
          <netui:checkBox id="con2" dataSource="{container.item.selContact}" defaultValue="{container.item.selContact}" />
          <netui:hidden dataSource="{container.item.contact_id}" tagId="conid2" />
          </td>
          </netui-data:choice>
          <netui-data:choice value="green">
          <td align="center" bgcolor="#CCFFCC" >
          <netui:checkBox tagId="con3" dataSource="{container.item.selContact}" defaultValue="{container.item.selContact}" />
          <netui:hidden dataSource="{container.item.contact_id}" tagId="conid3" />
          </td>
          </netui-data:choice>
          <netui-data:choice value="yellow">
          <td align="center" bgcolor="#FFFFCC" >
          <netui:checkBox tagId="con4" dataSource="{container.item.selContact}" defaultValue="{container.item.selContact}" />
          <netui:hidden dataSource="{container.item.contact_id}" tagId="conid4" />
          </td>
          </netui-data:choice>
          </netui-data:repeaterItem>
          <netui-data:repeaterFooter>
          </netui-data:repeaterFooter>
          </netui-data:repeater>
          </tr>
          </netui-data:choice>
          <netui-data:choice value="false">
          <tr class="BlackNorm8" bgcolor="#eeeeee">
          
          
          <td colspan="2">
          <netui:label value="{container.item.eventName}" />
          <netui:hidden dataSource="{container.item.eventId}" />
          </td>
          <netui-data:repeater dataSource="{container.item.cons}">
          <netui-data:repeaterHeader>
          </netui-data:repeaterHeader>
          <netui-data:repeaterItem>
          <netui-data:choiceMethod object="{pageFlow}" method="getAddHeader">
          <netui-data:methodParameter value="{container.item.contact_icon}" />
          </netui-data:choiceMethod>
          <netui-data:choice value="default">
          <td align="center" bgcolor="#FFCCCC" >
          <netui:checkBox tagId="conalt1" dataSource="{container.item.selContact}" defaultValue="{container.item.selContact}" />
          <netui:hidden tagId="conidalt1" dataSource="{container.item.contact_id}" />
          </td>
          </netui-data:choice>
          <netui-data:choice value="blue">
          <td align="center" bgcolor="#D8EBFE" >
          <netui:checkBox tagId="conalt2" dataSource="{container.item.selContact}" defaultValue="{container.item.selContact}" />
          <netui:hidden tagId="conidalt2" dataSource="{container.item.contact_id}" />
          </td>
          </netui-data:choice>
          <netui-data:choice value="green">
          <td align="center" bgcolor="#CCFFCC" >
          <netui:checkBox tagId="conalt3" dataSource="{container.item.selContact}" defaultValue="{container.item.selContact}" />
          <netui:hidden tagId="conidalt3" dataSource="{container.item.contact_id}" />
          </td>
          </netui-data:choice>
          <netui-data:choice value="yellow">
          <td align="center" bgcolor="#FFFFCC" >
          <netui:checkBox tagId="conalt4" dataSource="{container.item.selContact}" defaultValue="{container.item.selContact}" />
          <netui:hidden tagId="conidalt4" dataSource="{container.item.contact_id}" />
          </td>
          </netui-data:choice>
          </netui-data:repeaterItem>
          <netui-data:repeaterFooter>
          </netui-data:repeaterFooter>
          </netui-data:repeater>
          </tr>
          </netui-data:choice>
          </netui-data:repeaterItem>
          <netui-data:repeaterFooter>
          </netui-data:repeaterFooter>
          </netui-data:repeater>
          Â </td>
          </tr>
          
          <tr bgcolor="#cccccc" class="BlackHeavy8">
          
          <td colspan="2">Select ALL</td>
          <netui-data:repeater dataSource="{pageFlow.contacts}" defaultText="Â ">
          <netui-data:repeaterHeader>
          </netui-data:repeaterHeader>
          <netui-data:repeaterItem>
          <netui-data:choiceMethod object="{pageFlow}" method="getAddHeader">
          <netui-data:methodParameter value="{container.item.contact_icon}" />
          </netui-data:choiceMethod>
          <netui-data:choice value="default">
          <td align="center" nowrap="true" bgcolor="#FFCCCC">
          <netui:hidden dataSource="{container.item.contact_id}" tagId="chbox1" />
          <input type="checkbox" value="false"
          onclick="selectAllEvents('chbox1')">Select ALL
          </td>
          </netui-data:choice>
          <netui-data:choice value="blue">
          <td align="center" nowrap="true" bgcolor="#D8EBFE">
          <netui:hidden dataSource="{container.item.contact_id}" tagId="chbox2" />
          <input type="checkbox" value="false"
          onclick="selectAllEvents('chbox2')">Select All
          </td>
          </netui-data:choice>
          <netui-data:choice value="green">
          <td align="center" nowrap="true" bgcolor="#CCFFCC">
          <netui:hidden dataSource="{container.item.contact_id}" tagId="chbox3" />
          <input type="checkbox" value="false" onclick="selectAllEvents('chbox3')">Select All
          </td>
          </netui-data:choice>
          <netui-data:choice value="yellow">
          <td align="center" nowrap="true" bgcolor="#FFFFCC">
          <netui:hidden dataSource="{container.item.contact_id}" tagId="chbox4" />
          <input type="checkbox" value="false" onclick="selectAllEvents('chbox4')">Select All
          </td>
          </netui-data:choice>
          </netui-data:repeaterItem>
          <netui-data:repeaterFooter></netui-data:repeaterFooter>
          </netui-data:repeater>
          </tr>
          
          </table>
          </td>
          <tr align="right">
          <td>
          <netui:button type="submit" value="Cancel" action="begin" styleClass="BlackNorm8"></netui:button>
          <netui:button value="Update" styleClass="BlackNorm8"/>
          </tr>
          </table>
          </netui:form>

hi ,
i dont know anything about delphi but from the experience from VB if the connection to oracle in delhpi doesnt recognise object type data field. Then try using OO4O drivers from oracle.if u use these drivers then u can access the sdo_geometry field !
Hope this helps
Vikesh

Conditional alternating row colors

Hello
I have a report of companies an their country which is ordered by the column country. I'd like to have a alternating row color for every new country and not for every new row as it is in custom settings.
Is that possible? How can I do that?
Regards Felix
Edited by: Felix on 21.09.2011 12:33

Hi Scott
sorry, I still not quite understand how to do, because which row must be colored depends on the number of countries in the database and alphabetic order of the countries.
For example I show you only the country row of an example report and its row color as it should be right of it (because you cannot color text in this forum):
[Country Row] [Row color]
Albania light blue
Albania light blue
Albania light blue
Albania light blue
Andorra light green
Andorra light green
Andorra light green
Andorra light green
Argentina light blue
Australia light green
Australia light green
Australia light green
Once some data rows are inserted with a new country it should look like this
[Country Row] [Row color]
Albania light blue
Albania light blue
Albania light blue
Albania light blue
Algeria light green (new data)
Algeria light green (new data)
Algeria light green (new data)
Andorra light blue (color switched)
Andorra light blue (color switched)
Andorra light blue (color switched)
Andorra light blue (color switched)
Argentina light green (color switched)
Australia light blue (color switched)
Australia light blue (color switched)
Australia light blue (color switched)
Now the row color of rows beneath Algeria changed (in order to keep the alternating row color alternating)
I hope I now pointed out my problem more clearly.
Thanks
Felix

Report Template - Standard, Alternating Row Colors

I'm using APEX 4.1.0 and theme 22 on Oracle 10g.
I have some tabular forms in my application. For 2 of those, row deletions are allowed and I have the usual select box column to manage the row deletions. Also my users like the "Standard, Alternating Row Colors" report template and would like to see the alternating row colors whenever possible. Unfortunately I get the "Error on page." browser error in IE when I check a row selector box using this template. When I use a different report template I don't get this error.
The tabular form functions correctly so this error is harmless, but I would like to know what it is for. I'm sure my users would rather not see that error.
By the way, in Firefox the firebug error count increases and I get the following error in the console:
TypeError: can't convert undefined to object
[Break On This Error]
...ovedColor)}gLastRowMoved=b}function html_RowUp(e,d){var c=$x_UpTill(e,"TR");ie_R...
apex_4_1.min.js (line 18)Because all of the whitespace has been helpfully removed :) it's hard to see which expression is undefined and why.
Any ideas?

Hi Jackie,
There must be some issues the apex_4_1.min.js file, try to reload it. In apex.oracle.com the tabular form with "Standard, Alternating Row Colors" just works fine.
Regards,
Natarajan

Problem with netui:data repeater tag

Hi,
I have 10 checkboxes in a form. It is represented as array of boolean in the form.
The form and the checkbox values are initialised in the JPF class. Using repeater
tag to display the checkboxes.
When the user clicks on first check box, all other check boxes should be selected.
Need to do this with client side validation.
Can someone tell me how to do this?

Hi kunal,
Thanks for your immediate response.
But, if I use , I am getting an saying that the file does not exist.
I have included your code, can you check it. Also, I just want the link to be displayed, not the values that I am getting through the netui-data:repeaterItem tag. Can you please help me.
I am attaching my code here:
<netui-data:repeater dataSource="{pageFlow.results2}">
<netui-data:repeaterHeader></netui-data:repeaterHeader>
<netui-data:repeaterItem >
<netui:label value="{container.item.title}" defaultValue=" " ></netui:label>
</netui-data:repeaterItem>
<netui-data:repeaterItem>
<netui:label value="{container.item.link}" defaultValue=" " ></netui:label>
</netui-data:repeaterItem>
<netui-data:repeaterItem>
<netui:label value="{container.item.title}" defaultValue=" "></netui:label>
</netui-data:repeaterItem>
<netui-data:repeaterFooter></ol></netui-data:repeaterFooter>
</netui-data:repeater>
Thanks,
Latha

Alternating row color for CF report Builder?

I have a user who wants one of her reports to display
alternating row colors for better read clarity. The reports are
rather lengthy and the rows tend to blend in with eachother.

Thanks Epulfy. I am going to give this a try later today.
Much appreciated
EDIT:: This does work. however I'm not sure how to set a
rectangle to the background of the report so it's behind my
details. I draw the rectangle and it just hides whatever I want to
display. When I look at the report it does alternate with rows, but
I can only see details from the rows that it does not alternate on.
Any clue how to set it to the background?

DataGrid alternating row colors per column

Is there a way to set different alternating colors to each
column in a DataGrid. I have a datagrid where I want two of the
columns to have different alternating row colors, one column (red
and light red) and the other (green and light green).
Many thanks

You can simply set the DataGridColumn property to the
approprate colors.
ex.
<mx:DataGrid y="0" x="0" width="100%">
<mx:columns>
<mx:DataGridColumn id="col1" backgroundColor="0x640000"
dataField="col1"/>
<mx:DataGridColumn id="col1" backgroundColor="0xFF0000"
dataField="col1"/>
<mx:DataGridColumn id="col1" backgroundColor="0x006600"
dataField="col1"/>
<mx:DataGridColumn id="col1" backgroundColor="0x33CC33"
dataField="col1"/>
</mx:columns>
</mx:DataGrid>
or you can use the setStyle:
col1.setStyle("backgroudColor", 0x640000)

How to Display string array in jsp page using netui-data:repeater tag ??

hi,
I am trying to display a string array in a table using the netui-data:repeater tag.
I have to use a page flow controller Array(1 Dimensional) to be displayed in the jsp.
Can any one tell me how to print the array in a table of 3rows & 5 columns.
Here is the code on which I am crrently working on.
<netui-data:repeater dataSource="{pageFlow.strWorkObject_Array}">
<netui-data:repeaterHeader>
<table cellpadding="4" border="1" class="tablebody">
</netui-data:repeaterHeader>
<netui-data:repeaterItem>
<tr>
<td><netui:label value="{container.item}" >
</netui:label></td>
<td><netui:label value="{container.item}">
</netui:label></td>
<td><netui:label value="{container.item}">
</netui:label></td>
</tr>
</netui-data:repeaterItem>
<netui-data:repeaterFooter>
</table>
</netui-data:repeaterFooter>
</netui-data:repeater>

weblogic.developer.interest.workshop
Mansoor Naseem wrote:
I would like to know where the pageflow newsgroup is.
These are all the groups in weblogic.developer.interest:
weblogic.developer.interest.60beta.* (5 groups) weblogic.developer.interest.management
weblogic.developer.interest.61beta.* (2 groups) weblogic.developer.interest.misc
weblogic.developer.interest.clustering.* (1 group) weblogic.developer.interest.performance
weblogic.developer.interest.commerce weblogic.developer.interest.personalization
weblogic.developer.interest.ejb.* (3 groups) weblogic.developer.interest.portal
weblogic.developer.interest.environment weblogic.developer.interest.rmi-iiop
weblogic.developer.interest.jdbc weblogic.developer.interest.security
weblogic.developer.interest.jms weblogic.developer.interest.servlet
weblogic.developer.interest.jndi weblogic.developer.interest.tools
weblogic.developer.interest.jsp weblogic.developer.interest.weblogicenterprise
MN

Prob in accessing DataSourece value from netui-data:repeater after submit

HI all,
          I am new to this WLWS. PLease guide me in the following scenario:
          I am retrieving an array of records (activityDetails[]) from a Db control and setting this to the datasource property of a netui-data:repeater. Basically I am populating a list of records in my jsp page which works fine.
          But When a submit the page, I am not able to access that array of records from the action method difined in my controller.jpf file, even though I have declared the array in the Form bean.
          And I am not sure if have set the proper datasource for the checkBox defined within the records. The purpose of this checkbox is to select the records form the list to be saved in the database. Is there any better way of achieving the same.
          It's throwing Null pointer exception in the method called
          doProcess.
          Here is the related code:
          activities.jsp
          <netui:button type="submit" tagId="btnSave" value="Save" styleClass="btn" action="doProcess"/>
          <netui:button tagId="btnPrint" value="Print" styleClass="btn" onClick="doPrint()"/>
                                   </td>
                              </tr>
          <netui-data:repeater dataSource="{actionForm.activityDetails}" >
          <netui-data:getData resultId="pkg" value="{container.item.pkg_header_id}" />
          <tr bordercolor="#A8A8A8" >
          <%
          if (pageContext.getAttribute("pkg") == null)
          %>
          <td><netui:content value=" "/></td>
          <%
          else
          %>
          <td><netui:checkBox dataSource="{container.item.activity_id}"/>
          <%
          %>
          <td><netui:content value="{container.item.prt_no}"/> </td>
          <td><netui:content value="{container.item.activity_num}"/> </td>
          <td><netui:content value="{container.item.frc_acct_code}"/> </td>
          <td><netui:content value="{container.item.frc_acct_code}"/> </td>
          <td><netui:content value="{container.item.status_code}"/> </td>
          <td><netui:content value="{container.item.location_code}"/> </td>
          <td><netui:content value="{container.item.task_code}"/> </td>
          <td><netui:content value=" "/> </td>
          <td><netui:content value="{container.item.wpid}"/> </td>
          <td><netui:content value="{container.item.original_qty}"/> </td>
          <td><netui:content value="{container.item.act_obj_hrs}"/> </td>
          <td><netui:content value="{container.item.act_actual_hrs}"/> </td>
          <td><netui:content value="{container.item.act_rmng_hrs}"/> </td>
          <td><netui:content value="{container.item.act_rmrk}"/> </td>
          </tr>
          </netui-data:repeater>
          </table>
          </netui:form>
          </netui-template:section>
          </netui-template:template>
          Here is the .jpf file
          public class VSchedController extends PageFlowController
          * @common:control
          private custom.ConstSched constSched;
          private ActivityDetails[] activityDetails;
          * @jpf:action
          * @jpf:forward name="index" path="index.jsp"
          * @jpf:forward name = "success" path = "packageActivities.jsp"
          protected Forward begin(PackageSchedForm form) throws SQLException
          HttpSession s = getRequest().getSession(false);
          int jobID = (s.getAttribute("JOB_ID") != null) ? Integer.parseInt(s.getAttribute("JOB_ID").toString()) : 0;
          if (jobID == 0) jobID = 6;
          setActivityDetails(constSched.getAllActivities(jobID));
          form.setActivityDetails(activityDetails);
          return new Forward("success");
          * @jpf:action
          * @jpf:forward name="success" path="packageActivities.jsp"
          protected Forward doProcess(PackageSchedForm form) throws SQLException
          System.out.println("----------------------------------------");
          System.out.println("ActivityDetails is null ? " + (form.activityDetails == null));
          for(int i=0; i < 6; i++)
          try
          System.out.println("Checked -> " + form.activityDetails.activity_id);
          catch(Exception e)
          System.out.println(i);
          System.out.println("----------------------------------------");
          return new Forward("success");
          public ActivityDetails[] getActivityDetails()
          return this.activityDetails;
          public void setActivityDetails(ActivityDetails[] activityDetails)
          this.activityDetails = activityDetails;
          * FormData get and set methods may be overwritten by the Form Bean editor.
          public static class PackageSchedForm extends FormData
          private ActivityDetails[] activityDetails;
          public ActivityDetails[] getActivityDetails()
          return this.activityDetails;
          public void setActivityDetails(ActivityDetails[] activityDetails)
          this.activityDetails = activityDetails;

Personally, I have had a hard time doing what you are asking for using netui tags. I have had the same case, and asked the person in my team to just return a collection of value objects and then iterate through it without the repeater tag. To use the checkbox, I have had to use a String[].
          Kunal

Interactive report default has alternating row colors, how to remove this?

Is it possible to remove the alternating row colors from the interactive report.
In a standard report I can select the report template, but in a interactive report not.
Regards,
Rob

To customize a single page, add this rule to the CSS Inline page attribute:
.apexir_WORKSHEET_DATA tr.odd td {
background: rgb(242, 242, 242) !important;
To apply to a complete application, either add
.apexir_WORKSHEET_DATA tr.odd td {
background: rgb(242, 242, 242) !important;
to the Cascading Style Sheet Inline attribute on each page template, or create a CSS file containing
.apexir_WORKSHEET_DATA tr.odd td {
background: rgb(242, 242, 242);
upload it to your workspace, and reference it after the theme link in each page template Header:
<link rel="stylesheet" href="#IMAGE_PREFIX#themes/theme_4/css/theme_4_0.css" type="text/css" />
<link rel="stylesheet" href="#WORKSPACE_IMAGES#theme_4_0_no_alt_row.css" type="text/css" />

Simple Paging with netui-data:repeater

Hello,
Does anyone have a simple paging example (code, etc) for use with the netui-data:repeater? I have seen Gerald Nunn's solution and while I got the example to work, I have been unable to get it to work with my own project. I'm afraid I just do not yet have enough skill with BEA and java. A simple example would be great.
Thanks...

hi there,
Its been resolved now , was a code error , it was actually using the wrong object.
thanks anyways

netui-data:repeater tag

Hi,
I am using <netui-data:repeater> tag to display array of object.
This array has 20 elements and I am displaying only 5 elements at one time and
providing next and previous button to the user.
Can I specify the starting index and the end index in repeater tag so that I
display
the processing array object values in my repeater tag.

Tim,
I had a similar issue and I could not find a way via the start index and end index
as you would expect.
However, what you can do is write a method in your JPF and access it via <netui-data:choiceMethod...>
tag.Disdavntage being the repeater tag would still loop through rthe entire set,
but would display only what you want.
<netui-data:repeaterItem>
<netui-data:choiceMethod object="{pageFlow}" method="isLineCounterMaxed">
<netui-data:methodParameter value="{container.index}"/>
<netui-data:methodParameter value="{pageContext.lastLineNumber}"/>
</netui-data:choiceMethod>
<netui-data:choice value="true">
........DIsplay Your Data Here.......
</netui-data:choice >
</netui-data:repeaterItem>
Thanks
Rishi
"Tim" <[email protected]> wrote:
>
Hi,
I am using <netui-data:repeater> tag to display array of object.
This array has 20 elements and I am displaying only 5 elements at one
time and
providing next and previous button to the user.
Can I specify the starting index and the end index in repeater tag so
that I
display
the processing array object values in my repeater tag.

Alternating row colors inside netui-data:repeater?

Similar Messages

Maybe you are looking for