Alternative AS2 ID in Party

Hello,
is it possible to use more than one AS2 in a Party (as alternative Identifier?). Our party uses two different AS2 IDs. One for sent messages, one for received messages. We however would like to use just one party object. Is there the possibility to use an alternative AS2 Identifier or do we really need to create an additional party?
Thank you for your advice.

I am not aware of any alternative for this
In my opinion, you have to go with additional party. Lets see if someone come up with an alternative.
Regards,
Prateek

Similar Messages

Biztalk as2 and x12 party testing on Testing Server

hi experts,
we are currently in testing env , we have lot of parties configuration on x12 and as2. the parties we have live partners identities.
while we testing the we facing the the party not found exception.
1. how to avoid party not found exception or as per testing way as of now.
2.otherwise i think we have to configure some dummy party , assing the where ever.
please any one put your inputs,.........
Thanks

Thanks Boat,Tanmoy,
Tanmoy your sounds make some approach 2 me, Plz put more clarity global party.
here we have as2 url and x12. how to we have create some global party for testing purpose only.
Thanks

AS2 over HTTP Send port question.

I have an application that builds and sends flat and EDI files to FTP, FILE, SqlAdapter send ports and now they want AS2 over an HTTP port, I understand the AS2 settings (using party resolution, etc.) what I don't get is how/what exactly is receiving
the message on the other side... They don't have a web service nor a page, I created a site to test but what do I do? Send an edi file to a url????
Bico Bielich

From your question I understand, you have been asked to send message through AS2. Do they also going to receive message through AS2 from their party? Is your question is about how to receive the message through AS2 which you also want to send over AS2?
You can configure
BTSHTTPReceive.dll to receive messages over HTTP and configure the Receive location with AS2 EDI pipeline component to receive messages over AS2 into BizTalk which can be subscribed by your send port filter or Orchestration ( if you have any process
to be applied before sending the message over AS2 send).
Check the Tutorial-3 part of AS2 which illustrate an example which receives an AS2 message through BTSHTTPReceive.dll.
Tutorial 3: AS2 Tutorial
And following references shall help you configure the BTSHTTPReceive.dll:
How to Configure IIS for an HTTP Receive Location
Configuring BTSHTTPReceive.dll to work on IIS 7
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

VERY VERY URGENT..!! AS2 connectivity to partner system.

Hi all,
I supposed to do EDI --> Idoc Scenario
Im having partners A,B,C with three sender communication channels (for 3 interfaces)
CC_AS1   for partner A ,
CC_AS2   for partner B,
CC_AS3   for partner C.
all the messages (ediorders,ediinvoice .. etc) will be sending to the AS2 url
HTTP://<your-xi-server>:50000/SeeburgerAS2/AS2Server
from there the messages has to point to each communication channel (either to CC_AS1 or CC_AS2 or CC_AS3) depending on the
Partner(A,B,C) -- which we will provide in party configuration and
message(orders,invoice.. etc).
My question is
1. How it will point to each communication channel?
2. How it will transfer the correct message to correct CC.?
3. What are the details we need to provide in AS2 sender communication channel to differentiate each communication channel.?
Need help urgently.
Thank You.
Note : Make sure that we are not using any WAN or Mail box .. to give mail subject line in Message subject.
Regards
Deepthi.

Normally :
The messages will flow from partner system thorough WAN to Mail box and we will put that mail subject (ex: orders_918902)to the Message subject of AS2 sender adapter.
So it will pick the files according to the subject of mail box.
Now to reduce the cost, they are completely replacing this WAN or mail box.
The messages now will flow to AS2 server through internet.
HTTP://<your-xi-server>:50000/SeeburgerAS2/AS2Server
So all the messages from all the partners will be pointing to that url.
Now my problem is how the messages will differentiate to which communication channel it has to go??
EX: Orders will be coming from three partners(A,B,C)
then how the AS2 adapter of party A will receive the correct msg which belongs to them.
We need to differentiate that by giving some information in AS2 adpater.. either Message subject or someother information..
I need that exact information.
Regards
Deepthi.

Problem : Idoc to File scneario using Party ..!!

Hi ,
lam doing Idoc to file scenario by using party.
Partner type for receiving system is "LS".
1. when I use Party for my sending system , the message is not processing showing error as " No receiver could be determined"
2. When I use the sending system as Without Party and the receiving system as Party,the message is processing.
Questions:
1. We should not use Party for the sender system when the partner type is "LS"??
2. Can we use the Party for my sending system when the partner type is "LI" or "KU".?
If yes, Do i need to do any Identifier settings in communication channels or at Party side like ALE#KU or ALE#LI??
Please clarify the main question whether can i use party for my SAP system when the partner type is "LS" for outbound scenario(Idoc to file).
Waiting for your answers.
Regards
Krupakar.

Hi,''
a SLD registration of DUMMY system for every Party
1. We should not use Party for the sender system when the partner type is "LS"??
The only way I know is to make a Dummy system in the SLD with a LS, which I can use in the headermapping of the receiver agreement.
You could use pratner type as LS enven for party, but there no need as such because you could do this as per below steps also
it is not possible to have a logical system within a service, that belongs to a party. Any entries you are doing here, are ignored.
2. Can we use the Party for my sending system when the partner type is "LI" or "KU".?
If yes, Do i need to do any Identifier settings in communication channels or at Party side like ALE#KU or ALE#LI??
Yes you can use the Party for sending system for LI or KU, You difinately need to setup the identifiers for it.
Usually an IDOC which is received from a customer should have a sender type LI or KU.
A workaround for your problem: For each service that belongs to a party create a party-less service with the logical system and do a header mapping. You need not maintain this service in the SLD. Just create a business service.
If the field SNDPRT contains LS, the service is a logical system and the sender party remains blank.
If it is not a logical system, a party is determined by means of the alternative identifiers (for the party). The following are used as identifiers:
·        Agency is the sender service found
·        Scheme is ALE# + SNDPRT. If the field SNDPFC contains a value, the following is added: # + SNDPFC
·        Name is SNDPRN
These values are used to search across all parties. The party that is found is used as the sender party.
For Identifiers go through below link
http://help.sap.com/saphelp_nw04/helpdata/en/42/f3d027074e1bcae10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e1/63e03fc2269615e10000000a155106/frameset.htm
Let me know if you need anymore info.
Thanks
Swarup

Alternative Identifiers

When you specify an alternative Identifier in a party, for instance, scheme type ALE#LI#LF, value 2000000000, agency DDSCLNT220. Do you have to specify anything in the indentifier section of the IDOC Adapter communication channel that belong to the service without party. For instance would the party be DDSCLNT220 and the schema be ALE#LI#LF?
Regards,
Chris

check if this helps <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e1/63e03fc2269615e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/e1/63e03fc2269615e10000000a155106/frameset.htm</a>

Want to use an iPod photo configurated for Mac on a PC

I want to use my old iPod photo (configurated for Mac) on a PC (but do not need to keep my songs and photos). Is this possible? If so, what do I do?
iMac G5 Mac OS X (10.4.8) iPod 5th generation 60 GB

If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. Macs can read Windows drives so you could restore and format the iPod on a PC, this would also mean any future software updates would have to be done on Windows. This will erase your drive so you need to have your songs and photos backed up. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews and has the functionality to let you copy content from the iPod to the PC. Not sure if it does photos but have a look: XPlay 2
You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

Syncing iPod with Windows

I am wondering if I am able to connect my configured MAC ipod with the windows itunes?

If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. If the iPod is going to be used permanently on a PC or on both Windows and OS X then it would be best to restore and reformat the iPod in iTunes for Windows. Macs can read Windows drives so you can reload the songs from your Mac and use it on both platforms. Once it's restored for Windows any future software updates will have to be done on the PC to maintain the formatting. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews: XPlay 2iPod on Mac and Windows

External hard drive from pc to mac please help

My HP motherboard fried but the hard drive was fine. I extracted it, and put it an external enclosure and made it external. I plugged it in and it shows up on disk utility, but now I don't know what to do. I want to be able to transfer my old files to my new Mac. It says disk1s1 (the part with all of the files) isn't mounted. Should I mount it? will this erase my old data? Thanks

Hello jnorris5
Welcome to the Apple Discussions!
If the drive shows up in disk utility then it should show up in Finder (desktop). If it does show in Finder then all you have to do is drag and drop the files that you want to the Mac.
As the other poster stated you may be running NTFS file system on the ext drive, this is not a problem if you're only reading or copying the files. If you plan on writing to the drive with your Mac then you'll need to either format the drive (once you get the data off) to OSX Extended (Journaled) or FAT. You can alternately use a third party program such as paragon or macdrive, suggested by the other poster.
But if all you want to do is get the data from the drive to the Mac then just plug it in drag and drop the files.

Is it impossible to use my iPod with my Mac at home and my PC at work?

I've been using my iPod nano with my MacBook at home for over a year without incident (more or less). I have a PC desktop at work, and I'd like to be able to use my iPod here as well -- is that the impossible dream? I'd rather not have to reformat the iPod or restore it and lose all my files, but I can do that if it'll help me to use the iPod in both places. Any advice is much appreciated. Thanks!
-Kate

If your iPod is formatted for Mac it won't run natively on a PC because Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats): How to determine your iPod's disk format
Macs can read Windows drives so you could restore and format the iPod on a PC. iTunes will allow you to use an iPod formatted for Windows on a Mac. One proviso is that Apple currently only fully supports using the iPod shuffle in FAT32 format on Mac, in other words all future software updates for the iPod would have to be carried out in Windows to maintain the formatting. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews. It's a commercial program so you'll have to purchase a license to use it: XPlay 2
You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

Can i transfer music from ipod back to pc after hard drive scrubbed?

i have a lot of music loaded. but our hard drive was scrubbed and the library from which this music came was erased.
i re-installed itunes, and at first looked for a way to transfer the music from the ipod back onto the computer.
couldn't figure that out. then tried loading a new cd into itunes so that it could be added to ipod. the software displayed this message:
The ipod "Kim Smith's (my wife)ipod" is linked to another itunes music library. do you want to change the link to this itunes music library & REPLACE ALL EXISTING SONGS & PLAYLISTS ON THIS IPOD WITH THOSE FROM THIS LIBRARY? (my caps.)
I assume that yes means that the 200 or so albums currently on the ipod would be erased and replaced by the one album i tried to upload.
i need a way to add new music to that which is already on the ipod, and to transfer those 200 albums on to the computer so that i can delete the christina aguilera album that my wife snuck on to the ipod.
has anyone had a similar experience?
thx for any help here.

Do not click "yes". (Assuming Windows) Connect your iPod to your computer, and go into My Computer where it should appear as a disk. Enable hidden files if not already enabled. Open the grayed-out folder "iPod_Control" and then its subdirectory "Music". Your songs shouuld be in the "F##" folders. Just copy them to your computer. Alternatively, use a third party application like Yamipod. Once the files are on your computer, add them to your iPod library, and then you can click "yes" on that message. It should transfer all your songs to the iPod.
Tom

Help! I am using OS X 10.5.8 How do I update my system?

sorry for the ignorance. I wanted to update my system from the 10.5.8 to the most recent OS Mountain Lion and could not figure out how to do it. I had to find the MAC APPS STORE first since it is NOT in my dock. So I downloaded the Mac OS X 10.6.6 update combo, and the error message says "This update version requires 10.6! OK, i need a little help getting from 10.5.8 to 10.6. Any words of wisdom?
To complicate things, I bought this computer in the states but I am currently living in Guatemala. Not really a Apple Store around the corner. Not to mention it is a big 27" imac desktop.
Thanks
v s

You will have to purchase the Snow Leopard DVD. See:
Apple confirmed the removal of the software yesterday afternoon, and said that customers can still purchase a copy from its online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.]
Alternatively, there are third-party sources:
Snow Leopard from Amazon.com
Snow Leopard from eBay
You can then use the 10.6.6 update you downloaded. Then you can sign into the App Store using your Apple ID to purchase and download Mountain Lion. Note that your computer must meet the system requirements:
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)

HT201343 I have a mid 2011 iMac and i do not see a AirPlay option on my device. Why?

I have a mid 2011 iMac and i do not see a AirPlay option on my device. Why?

Hi Fid
Your mac is fine but you need OS X 10.8 Mountain Lion or newer and your profile says you have OS X 10.7.5 Lion. You need to get ML as a purchase from the app store as mirror is a new feature with that OS.
The alternative is a third party app called airparrot.
Jules

How to adjust letter (or character) spacing on PDF Form?

I am using Acrobat X Pro. On my fillable form, I would like to set the spacing between letters. As an example, if you go to the IRS.gov site and download the 1040EZ PDF form, you can see that the spacing between the digits of the social security number entry has been widened. How did they do that? I could not find it when I right clicked and selected properties.
Thank you.

Thanks for your response. I don't really need the comb feature if you define comb "as a field where each letter has a specific visible box that it fits into."
I am designing a form with a phone number and SSN. I am overlaying small vertical lines in the field to separate the digit groupings. I just need to get it consistent and it would be nice to use a font that has a little more spacing between the letters (or a kerning adjustment).
Another forum said: "Try loading the form in LiveCycle Designer, which comes with Acrobat. If it's an XFA form (vs an AcroForms form), then you'll be able to edit the kerning in Designer."
Do I have any other alternatives besides purchasing 3rd party comb software?

How to use my MAC configurated iPod whith my work PC

I have an ibook at home, with an extensive iTunes library, which is configurated with my color screen iPod. At work I use my iPod to interview people and the problem is that we use PC/Windows at work... and I cant upload my memos/interviews on my work PC directly, but have to upload them on my iBook and them e-mail it to my work... not nice at all.
How can configurate my iPod to be able to talk both MAC and Windows???
Please enlight me! I'm most greatfull for all suggestions.

An iPod formatted for Mac won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. You can reformat your iPod on Windows if you want to use it on both platforms as Macs can read Windows formatting (I have seen posts where Windows iPods have been reported as not connecting but these tend to be the exception to the rule). Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance: XPlay 2

Alternative AS2 ID in Party

Similar Messages

Maybe you are looking for