Alternative for account assignment cat F

Hi Experts
In standard system, the account assignment for general is configured as F.
I wish to use different account determination for project material and services.
Is it OK if i change this standard AAC 'F' with N or any customized one with dedicated account modifier? I am convinced but looking for experts comments.
I do not understand why the cat 'F' is given in stead of standard 'N'.
Warm regards
ramSiva

In the older versions F was available for all order categories mostly 20 (networks) and 30 (maintenance) - however in subsequent versions N was made available
There is no reason why you cannot configure your own

Similar Messages

  • PR Release Strategy for Account assignment cat "U"

    Is it possible to set up release strategy for Acct assignment Cat "U" - if yes, How would it be configured?  additionally we are also setting up Rel str for acct assign cat K and A - specific question is relative to "U" in addition to K and A.
    Other parameters being used are
    pur Org
    Doc type
    cost center
    Total value
    Thanks for the help in advance
    Raj

    Dear Raj,
    When you creating PR with acct assignment U, the acct. assignment tab will not appear, thus
    you not able to enter cost center. You may try this workaround via customizing.
    a) You may define a <BLANK> value for the cost center in customizing and assign it to your release strategy.
    Characteristic:
    Cost Center:
    Value    Desc:
    1000     1000
    2000      2000
                    <BLANK>
    b) You may use user exit  EXIT_SAPLEBND_001 and pass the dummy cost center to get the release strategy
    determine.
    Regards,
    ian Wong Loke Foong

  • Cost center not committed on shopping cart,  for account assign cat "Asset"

    Hello,
    We are implementing extended classic scenario in SRM 5.0 with ECC 6.0 backend.
    While creating a shopping cart in SRM, in the cost assignment tab when we select an account assignment category as “Asset", and then try to enter a value in the cost center in the basic details of cost assignment, it is not getting committed to shopping cart screen. The cost center field value is lost when we move to the next screen for ordering the shopping cart. For the asset related purchases, we are using main account assignment category as "asset" and it also requires cost center, because while the asset master record is being created in R/3 for these items,it requires the cost center. We also using internal order. So for the account assignment category "Asset", the other account assignment fields that can be entered are cost center, internal order and one custom field called "project code".
    We have created this user-defined field in the cost assignment tab in the shopping cart, purchase order and confirmation documents in SRM in accordance with the OSS note 672960. We have implemented BBP_CUF_BADI_2 & BBP_DOC_CHANGE_BADI, BBP_DOC_CHECK_BADI for the shopping cart object.
    Can someone please help me with this issue?
    Thanks,
    Krupa

    thanks Ramakrishna and Yann for your prompt reply..
    Ramakrisha,
      I know that for assets, SC requires asset number and G/L is automatically derived from the corresponding asset class from the backend. In our case, we are putting dummy asset number in shopping cart and this asset number exists in R/3. But we are not generating asset creation during shopping cart creation but we are doing it during the PO creation in doc change badi. During this asset generation you also need cost center on the asset record. So we have added cost center field for Asset account assignment category and I can see it in the details of account assignment. But when I enter this cost center on shopping cart, it doesnot get committed, it disappears when I order the shopping cart.
    Does anybody have any clue why this might be happening?
    Thanks,
    Krupa

  • PO release strategy based on Account Assignment Cat (CEKKO - KNTTP)

    Hi Experts,
    I want to configure the release strategy for PO on account assignment category.when i  maintaining a characteristic for account assignment cat by inputing CEKKO- KNTTP , sys throughs error message. I looked in to CEKKO but I could not find the field .Kindly tel how maintain teh same .
    Regards,
    Kumar.

    Hi Kumar,
    Account Assignment Category and Item Category belong to the item level and not to the header level of a purchase order (table EKPO). Therefore,   neither Account Assignment Category nor Item Category are available in CEKKO.As work-around you can use the following user-exit:                                                                               
    MM06EF0S_STRATEGIE_CEKKO                                                   
    (enhancement M06E0004, EXIT_SAPLEBND_002, ZXM06U22).                       
    In this user-exit the data are available in structure I_CEKKO.   The hand-over from I_CEKKO to the calling program is via structure E_CEKKO.   In the user-exit I_CEKKO has to be copied to E_CEKKO , e.g. 
    E_CEKKO = I_CEKKO.                                                                               
    Please also see our FAQ note 365604, it is worth reading.  
    Regards,
    Mauro

  • Goods Receipt for Account assigned PO

    Hello
    Is it possible to store the goods in an account assigned Purchase Order. PO is assigned with account assignement 'F' production order. The purpose here is to recieve the goods for some days in stock and then consume. Is it possible or is there any alternative to achieve it.
    Thanks in advance,
    Amit

    Hi Amit,
    This is not possible to mainatin the stock for account assigned Purchase Order.
    For this You have to create the Normal PO (Without Acct Assignment) to mainatain stock ,then after that you maintain the Reservation to reserve all the qty for roduction Order.
    Issue qty to production order for consumption whenever you required.
    Rewards if Helpful
    Regards
    Sanjay L

  • Accual report for account assigned PO's

    Hi
    Pl. let me know if there is any month end accrual report for
    account assinged PO's.
    or any PO's accrual report  indicating total ordered value vs line wise invoiced value ,
    should be able to download.
    account assignement cat.- K
    thanks
    Prasanna

    Hi charlie
    I tried your first suggestion,
    system ask for me to
    enter one account assignment object.
    we do not want toenter account assignment object.
    in many Case , GR will be madethen IR or in some
    case no GR directly IR will be made.
    pl. advise
    thanks
    Prasanna

  • Extension of input fileds in Sales order for account assignment

    Dear Gurus,
    Can anyone tell me how to extend input fields like Statistical order(COBL-AUFNR)  and cost center(COBL-KOSTL) in sales order for accounting assignment and these fields have to be ready for manual entries. The order types are ZHGA and ZHV.
    Which program has to be modified and how it can be modified?
    Thanks a lot for help and advice.
    Cheers,
    Ricky
    Edited by: Ricky.Martin on Apr 23, 2010 10:45 AM

    Dear Rajendra,
    There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
    Definitely material Tax classification will influence to determine the Tax code.
    -->So Make sure that customer and material master having proper tax classification indicator.
    -->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
    -->Once again the check the condition record maintanence also for your MWST access sequence.
    I hope this will help you,
    Regards,
    Murali.

  • Multiple G/Ls for account assigned Purchase orders

    Hi all,
    We are having a service order dependent PO wherein the account assignment category is service order and is automatically generated..
    Now when we are going GR(MIGO), system is posting to only one G/L which is linked to the service order. I have created one more condition in the PO (handling charges) and it should go to a different G/L. How do I configure this. Please treat this as most urgent.
    Whatever is configured in automatic posting (OBYC, OMWB ) etc. is not applicable for  account assigned PO. What to do?
    Thanx in advance,
    Vijaya

    Hello
    Check SPRO>Materials Management>External Service Management>Valuation &Account Determination>Choose Account determination Wizard and check all settings for your company code, plant and purchase organization.
    Reg
    *assign points if useful

  • Acct determination for Account-assigned purchase order with keys not define

    Hi,
    I'm trying to post an IDOC of type BBPIV through XI to an R/3 system.
    The posted idoc in R/3 is in status 51 (Application document not posted) with the error message "Acct determination for Account-assigned purchase order with keys not defined in chart of acts WP2P"
    As per my understanding this is something related to FI.
    Long text of the error is "The system cannot generate an automatic posting because there is no account determination defined for Account-assigned purchase order with keys   in chart of accounts WP2P.
    Correct the account determination for Account-assigned purchase order"
    Please help me how to solve this.
    Regards,
    Rashmi

    Hiya,
    This looks like its a MM posting / transaction.
    You need to go to OBYC and maintain the account assignment. If you provide the business scenario (GR into Stock, Subcontracting, etc.) for the process, I may be able to help.
    VKOA is for SD account assignment and I don't believe you can use that here.
    Cheers.

  • Goods Receipt for Account-assigned Purchase Orders

    Hello,
      We want to make Goods Receipt for Account-assigned Purchase Orders. When we try, SAP gives the error 'Account determination for entry PCOA KBS 0001 not possible'. According to SAP online help, account assignment is adopted from the purchase orders for the transaction/event 'KBS' and we cannot assign transaction key 'KBS' to an account using transaction OBYC. How do you make it work? Any solution pointers will be appreciated and rewarded.
    Thanks,
    Venu

    create an implicit enhancement point in function module CKMV_AC_DOCUMENT_CREATE.
    IN STRUCTURE IT_ACCIT U CAN MODIFY THE gl ACCOUNT IN RUN TIME .

  • MR11 - GRIR clearing for account assigned PO.

    Hi Folks,
    I have a doubt on MR11 Account Maintenance for account assigned  C - Sales order PO and GR non Valuated.
    In this system is not allowing to Post AccM. document as the GR posting is not hitting GRIR clearing account and the same is happening after posting IR too.
    So please clarify whether my understanding is correct or not.  If possible please give the detailed explanation about the Accm for account assigned PO's.
    Thanks to you all
    Pratap J

    Hi,
    Please refer below link...
    http://www.sapfans.com/forums/viewtopic.php?f=3&t=252777
    Kuber

  • PO Release for Account assignment category is K(Cost centre)

    HI Experts
       I need to set up release procedure for PO when account assignment categeory which is being maintained at Item level so suggest suitable method
    Regard
    Srinivasan

    HI
    Yes i know PO Release is maintained at Header level but i need to prepare a functional Spec
    and i need to configure PO release for Account assignment category i think some user exits
    to be used please suggest how to proceed
    Regard
    Srinivasan Kannan

  • For Account assigned PO - pricing procedure key accounts are not triggering

    Hi
    For account assigned PO's only the account which I am assigning at the time of PO only hitting, and the other accounts are not hitting which should hit through my pricing procedure for the planned delivery costs condition types
    regards,
    Archu

    Hi Archu
    First check the pricing procedure and check for planned delivery cost or may be Fright and the Transction event key(GBB or FR!) assigned for that condditon. Now go to OBYC check for that Transction event key so that which GL account and general modifier is assigned also check for KBS(Account assigned PO) in OBYC.
    Regards,
    Hariprasad

  • Value Blank/space is invalid for account assignment element fund

    Hello!
    I created an invoice with several items linked to funds reservation.
    when the invoice has 2 line items, the payment run is executed without problem.
    when the invoice has more than 3 line items, the payment run is executed with error.
    The message error (message number F6804) is "value blank/space is invalid for account assignment element fund".
    I dont know where i should enter a valid value for fund.
    Thanks for your kind help!
    Chiachen

    Hi Chiachen,
    The problem occurred because the functional area is not inherited from the Purchase order during MIRO posting. As a result, error message F6841 is issued.
    There are 2 main programs for the FM derivation:
    1. Function Module FM_DERIVE_ACCOUNT_FROM_COBL
    2. Program LFMCOBLF06
    The latest notes which affects these 2 programs are 1244381 and 1247982.
    Kindly implement these notes using SNOTE.
    During this process, it should also bring in all the other pre-requisite notes. Do not worry if the
    symptoms described in the notes do not match yours. What's more important is to bring the coding in your system up to date. Please retest MIRO after the notes are applied. Let me know the results.
    Check also the notes 17941 and 982511.
    I hope it helps
    Best Regards,
    Vanessa Barth.

  • Error Message F6804 Value Blank/Space invalid for account assignment elemen

    Dear Experts,
    We have a problem in Travel Management,
    I have created a trip for paid by company expenses only and entered cost distribution (fund, funds center and WBS) in the trip.
    When I transfer a trip to FI through transaction PRRW throughing error message "F6804 Value Blank/Space invalid for account assignment element for fund and FI313 No funds center entered/ derived in Item".
    The paid by com. expenses receipts of wage types credited with - positive amount in 2nd symbolic account offsetting entry and flagged W/CO also the symbolic code linked to linked  to Temprary clearing GL it is BS GL .
    I checked all the existing threads messages but I did not get solution.
    the problem comes up from our upgradation, 6 months back we upgraded to ECC 6.
    We don't have any problems in our old 4.7 system still it is working fine.
    I created OSS but still they did not solved and they are refering all passed notes.
    could any one give the solution to come out from this problem?
    Thanks and Regards,
    Satya

    Hi Satya,
    Basically the error is because of Funds Management which you have activated. Please check the note 1268001, 701291, 558295 & 936658 but i dont know will this be helpful or not.
    Regards,
    S.Srikanth
    Edited by: SrikanthS on Oct 26, 2010 11:17 AM

Maybe you are looking for