Alternative for extractor 2LIS_02_S013  Vendor Evaluation InfoCube 0PUR_C02

Hi BW Gurus
Could some one advise me any alternative for 2LIS_02_S013  (Vendor Evaluation).
Vendor evaluation data is required for my customer.
At present 0PUR_C02 (Vendor evaluation) deactivated. due to miss match of fields S013, S013BIW1 and S013BIW2.
We are facing MIGO posting error update terminated. Now i had deactivated S013 at LBW0.
We already tried as per SAP note  Note 115192 and 818652.
But thre is no use.
Look forward to your valuble replays and points will be awareded .
Thankyou

Hi,
There is no alternative alternative for 2LIS_02_S013  to upload the cube  0PUR_C02
But I hope, we can replace the cube  0PUR_C02  with  0PUR_C05 .0PUR_C05 gets the data by the data source 0MM_PUR_VE_01.
http://help.sap.com/saphelp_nw04/helpdata/en/e7/daba37d4c2503ee10000009b38f842/frameset.htm
With rgds,
Anil Kumar Sharma .P

Similar Messages

  • Vendor Evaluation(2LIS_02_S013)

    Hello Friends
    i have  issue with 2lis_02_s013 vendor evaluation . issue is when i do full upload for  this data source i can retrive around 12000 records and when i try to do intial upload the system gives me error
    LIS updating is still activated (client 200 )M+     25     
    Errors in source system     RSM     340     
    so i am unable to intial load so i did intial load without any datatransfer . it works fine . it has transfered only one record . but when i do the delta upload it does not extarct any data it shows 0/0 records but the staus is green . when i see the details tab Processing (data packet): No data .i have already activated delta in the lbw1 . there i find only two options one asynchronous and noupdating i have selected . asynchronus. here do i need to fill any setup sepatretely for delta . so how can we delete the setup tables for 'S'types data sources. is that same as lbwq. plz let me know what need to be done inorder to fill the cube with delta upload . look forward to your valuble replays and points will be awareded .
    Thankyou

    Kumar,
         Fill up the setup tables for that extractor. Because the LO extraction only eorks on the the setup tables. And the setup tables are used when you do the delta.
    Go to SBIW -> Business Information Warehouse -> Logistics -> Managing Extract Structures ->
    Initilization -> Delete the setup tables. Select your extractor and delete the setup tables for it..And...
    SBIW -> Business Information Warehouse -> Logistics -> Managing Extract Structures -> Initilization -> Filling setup tables. Fill the corresponding setup tables for vendor evaluation.
    Try checking the data in RSA3.
    Hope this helps.....

  • Vendor Evaluation - Query

    Dear all.
    I need to create a query for the Process vendor Evaluation, that display the Notes of one Vendor. Is there a logical database to access this Info.
    At the moment i created an infoset link to table ELBK, and created some Adicional Fields but when i'm generating the Infoset System Returns the Following Message "Do all fields used have a name? (use help)".
    Best Regards
    Thanks in Advanced
    PMR

    Could you explain what you mean in your reply.
    Thanks in advance
    Roger

  • Tracing Vendor Evaluation Data

    Hi friends,
    I want to trace detail of Vendor Evaluation results. For example for a one vendor evaluation we used 5 different control party result. I would like to see this 5 value. Is it poosible? How?
    Thanks, have a nice day

    Thank you for your reply. Of course checked ME65. For example.
    Vendor valuated for 120 days. Purchased  raw material with 4 different order. Created 6 different control party. Now when I check the evaluation report at ME65.
    X Vendor
    Purchasing score %100
    Quality score %75
    @detail.
    Quality score %75. Which control parties created for this score? How can I understand??

  • Automatic Vendor Evaluation - Partner Roles

    Hi SAP Gurus,
    Please try to help me with the following scenario.
    My client has different Goods Suppliers (GS1, GS2 and GS3) for a particular vendor (VN). They have been attached as three different partner roles for the vendor (VN).
    They do evaluation for QUALITY - Subcriteria GR Inspection for each of the manufacturing locations (GS1, GS2 and GS3) through Automatic Vendor Evaluation for Quality - at GR Inspection.
    The question is, when an Automatic Evaluation for Quality is done at the main vendor (VN) level, will those scores which have already been evaluated at the three Goods Supplier locations (GS1, GS2 and GS3), will be considered for the Automatic Vendor Evaluation for Quality - at GR Inspection at the main Vendor (VN) level?
    Thanks in advance

    It is consider only main vendor not GS level

  • Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time

    Hello all,
    Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
    At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
    (ME61/ME62/ME63)
    Detailed replies with various possibilities would be highly appreciated.
    Thanks & Regards,
    Joy Ghosh

    The vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
    But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
    There you define a job that runs RM06LBAT report.
    You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create.

  • Standard report for Vendor Evaluation

    Hi everyone,
    Is there any standard reports (ALV) to display Vendor evaluation ranking list except ME65, ME6B, ME6H.
    any other Program names will also do...
    Thanks
    Sukriti...

    hi
    S_ALR_87012990 - Evaluation Comparison
    ME6H - Standard Analysis: Vendor Evaluation
    ME6E - Evaluation Records Without Weighting
    ME6C - Vendors Without Evaluation
    ME6B - Display Vendor Evaluation for Material
    ME65 - Evaluation Lists
    regards
    kunal

  • Custom report for vendor evaluation

    Hai All,
    My client requires custom report to show the vendor evaluation i.e., it has to show the working how it has arrived at the final score, to be clear systems works automatically and displays the final score based on certain main and sub criteria that working has to be shown in a table format for the purpose of TPM  audit.
    Regards
    R.Senthilnambi

    Hi Senthil,
    u can download the documents from sap help to show the logic to ur audit, how sap will calculate the scores.
    If they insist for certain data with logic, u can develop a z-report and show them for 10 or 20 materials.
    hope this resolves ur problem

  • Vendor evaluation report to be run for previous period

    Hi,
    Is the possible to run the Vendor evaluation report for back date.
    i.e. if the period of evaluation is 30 days, can we run the report for previous periods
    Regds,
    Ritesh

    Depending on the library you are using, can you verify whether you can use one of the following variables?
    1PERIK   
    1PERW   
    5ACPERI  
    6-PERIK  
    8WPERIO
    All these variables use fiscal periods and not calendar periods, that way you don't have to bother about number of weeks in a period, unless you really need to do the calculation based on number of days in a period.
    If your library does not support these variables, then pl copy one of these variables (GS11) with appropriate details into a custom variable and use it in your report.
    Let me know.
    Regards
    Subodh

  • Vendor evaluation report for a definite time period

    Hi Experts,
    Vendor Evaluation Summary Report required for the vendors for a definite time period. Output of the report should show the scores of vendors for criteria like Price, Delivery, Quality, Service and summation of all these scores.
    Please let me know if any standard report is available which can fulfill my requirement.
    Thanks in advance.
    Kishore.

    Hi,
    ME6H report is not fulfilling my requirement since i require the output format in the form like vendor, vendor name, plant, price, delivery, service, quality and the summation of scores given to these criterias.
    Thanks
    Kishore.

  • Is Quality management module required to be used for vendor evaluation?

    Hi,
    There is vendor evaluation functionality in MM. Is use of quality management module is mandatory for this? I wish to track the performance of vendor regarding quality (How much he has supplied, out of which how many are accepted and how many are rejected). Can I get this report without using QM?
    Thanks in advance,
    Satish

    you can enter Quality results manually in vendor evealuation, so QM is not necessary for this, however with QM you can get the scores semi-automatic and  automatically.

  • PO Valuation Type for Vendor Evaluation

    Dear Gurus
    I want to ask, can the Vendor evaluation program in SAP check the Purch.Order up to Valuation type ?
    So the VE program can differ the valuation type in Purchase order.
    Any respond are highly regarded
    Thanks and Best Regards
    Christian
    Edited by: C J Lee on Feb 1, 2011 6:38 AM

    Hi Piyush,
    Your answer is correct. Val type does not come from info record to MRP created PRs, even there is a fixed vendor in the PR, coming from source list.
    But, this happens in the PO, that val type is an obligatory field, for a split valuated material.
    In PR, it can only be maintained manually, I guess.

  • Additional functionality for vendor evaluation in ECC 6.0

    Hi folks,
    Can any one help me in getting the information below.
    Is there any additional functionality for vendor evaluation in ECC 6.0  when compared to ECC 4.7
    Pls let me know the functionality and the difference.
    Thanks
    Vasanth.

    Hi
    Is there any additional functionality for vendor evaluation in ECC 6.0 when compared to ECC 4.7
    The Solution Browser lets you enter start and target releases for functional areas, and provides you with the information about the new functionalities.
    You find the tool from our homepage at http://service.sap.com/erp (see the tool box on the right hand side).
    regards
    Andreas Rudolph

  • Maintaining key in vendor evaluation for porg

    how do i maintain weighting key for p org in vendor evaluation?? when i am trying to run vendor evaln for a vendor and porg...i get this msg saying no weighting ke assigned to this porg...plzz telll me abt the settings

    thnx i already found it, but thanx for the prompt reply...could u plzz help me further by confirming if by default the weighting keys assigned is 02.??
    regards

  • Vendor Evaluation-Scoring logic for percentage

    Dear Experts,
    I have mention below %  and score of vendors for sub criteria on-time delivery,it is mention in std SAP..I want to know % value is calculated here? how negative % values is given score?
    -          100     On-time del.
    1,0       90     On-time del.
    2,0         95     On-time del.
    10,0         80     On-time del.
    20,0         60     On-time del.
    30,0         40     On-time del.
    40,0         20     On-time del.
    50,         5     On-time del.
    99,9           1     On-time del.
    -5,0            95     On-time del.
    -10,0     65     On-time del.
    -20,0     75     On-time del.
    -30,0     60     On-time del.
    -40,0     40     On-time del.
    -50,0     20     On-time del.
    -60,0     5     On-time del.
    -99,9     1     On-time del.
    Thanks,

    Hi Shyam,
    I am also looking for the same.
    can u send me the full details of the Vendor Evaluation score % calculation .
    and MANUAL, Semi Auromatic,  Fully Automatic  Evaluation. what is the difference.
    what is the function of end user for execute Vendor evaluation for all the VENDORS AT A TIME.?
    Regards,
    Anthyodaya.

Maybe you are looking for

  • XSLT Mapping error

    Hi All I am working on PI 7.1 where I have customized standard XSLT mapping according to my requirement. I have to add 2 fields in the standard data type ReplenishmentOrder_Notfication from SNC 7.0 SWCV. In standard scenario once IDOC STPPOD.DELVRY03

  • Secondary Display image quality is poor (at 1:1) in Library module

    I'm not a frequent user of the Secondary Display feature, so I can't say state whether this particular issue is new in 2.3RC or if it also was seen in a previous version. I submitted a bug report since I searched but did not find any previous mention

  • 1394 adapter from analog VHS-C to Premiere

    I've got a job to copy video from some old VHS-C tapes to DVD. I hope that I can use the 1394 ports (FireWire)  on my motherboard or USB 3 for receive analog signal from the camcorder. Which adapter should I buy to be sure that it can be used to Prem

  • Populate BAM data object through adf form.

    I want to populate a BAM data object using adf form as we do in case of database table by creating a data control. How to do this?

  • Wifi apps in store of nokia asha 230

    my phone nokia asha 230has not support wifi..but in nokia store there have many apps about wifi like wifi optimizer,wifi locator,etc.why?