Alternative for VRF Source Select
We have "VRF Source Select" configuration alternative to Policy based Route-map in the Router Interfaces .Can anyone tell me if we have any alternative for "VRF Soure Select" . Unfortunately Cisco 7200 VXR NPE-G1 Routers doesn't this feature at all. NPE-G1 supports only VRF Forwading and VRF Site-maps!!!
Regards
Srikant
I can't think of an alternative but 12.0(28)S, which is planned to be on CCO at the end of April, will support the NPE-G1. This should solve the issue.
Hope this helps,
Similar Messages
-
Alternative for select count('x') or count(*)
Hi Gurus,
I need to use select count(*) multiple times in a SP before and after deletion of rows from multiple tables. As this is an expensive method, do we have some alternative for Count(*), like selecting something from a system table or view instead?Hi
You can know the number of rows affected by the DELETE statement in PL/SQL (if you are using PL/SQL) using sql%rowcount. So you don't really need to count the rows again after the delete took place...
If you are deleting the same rows as selected by the second count condition (older than a particular date), in fact you only need to count rows once for each table.
Luis -
Warning "Source selection for is incompatible for target selection" in RRI
Hi Friends,
I am getting the following warning message while jumping from one query to another(RRI) :
Source selection for is incompatible for target selection
I have also found one SAP Note : Note 1265027 - Incompatible selection for a variable in the target query which states that it is a program error and we have to Import Support Package 04 for SAP NetWeaver BI 7. 01 (SAPKW70104) into your BI system for SAP NW BI 7.0 Enhancement Package 1.
But the problem is we are already in Support Package 04 .After that also we are facing the same problem.
Can anyone please let me know how to fix this issue?Is anyone faced such an issue.
Thanks in advance.
Regards,
Debjani..check if the correction instruction given in the note is present in your system.
-
Issue with table ROOSPRMSF entries for data source 0FI_AP_4
Hi Experts,
I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries. Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL.
From OSS note 852443 point 3
"3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE copy entries into ROOSPRMSF table in R/3 ?
Could any one please clarify this ?
Thanks
Regards,
JeswanthHi Amarnath,
Did you unhide the new field in RSA6 and regenerated the DataSource?
Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
Grtx,
Marco -
How to generate an XML Configuration File for EBS Source Type
Hi,
We have installed SES, I want to integrate it to enable for searching repository contracts.
In the sources I have selected oracle.apps.okc.repository.textsearch.server.RepHeaderSearchExpVO.
For this source I need to specify the Configuration URL.
Here I need to provide the path for configuration XML file. But before that I need to generate the XML Configuration file.
Is there any steps on how we can create this XML file.
like I would want to know how we can create the XML file and on which folder on the server should I be putting it
ThanksHi there,
We are running into same issue and need the exact same information. Can someone help with this question on priority?
Thanks,
Darshan -
Ensure field sequence is correct for data for mutiple source structure
Hi,
I'm using LSMW with IDOC message type 'FIDCC2' Basic type 'FIDCCP02'.
I'm getting error that packed fields are not permitted.
I'm getting Ensure field sequence is correct for data for mutiple source structures.
Source Structures
HEADER_STRUCT G/L Account Document Header
LINE_STRUCT G/L Account Document Line
Source Fields
HEADER_STRUCT G/L Account Document Header
BKTXT C(025) Document Header Text
BLART C(002) Document Type
BLDAT DYMD(008) Document Date
BUDAT DYMD(008) Posting Date
KURSF C(009) Exchange rate
WAERS C(005) Currency
WWERT DYMD(008) Translation Date
XBLNR C(016) Reference
LINE_STRUCT G/L Account Document Line
AUFNR C(012) Order
HKONT C(010) G/L Account
KOSTL C(010) Cost Center
MEINS C(003) Base Unit of Measure
MENGE C(013) Quantity
PRCTR C(010) Profit Center
SGTXT C(050) Text
SHKZG C(001) Debit/Credit Ind.
WRBTR AMT3(013) Amount
I have changed PAC3 field for caracters fields of same length to avoid erreur message of no packed fields allowed.
Structure Relations
E1FIKPF FI Document Header (BKPF) <<<< HEADER_STRUCT G/L Account Document Header
Select Target Structure E1FIKPF .
E1FISEG FI Document Item (BSEG) <<<< LINE_STRUCT G/L Account Document Line
E1FISE2 FI Document Item, Second Part of E1FISEG (BSEG)
E1FINBU FI Subsidiary Ledger (FI-AP-AR) (BSEG)
E1FISEC CPD Customer/Vendor (BSEC)
E1FISET FI Tax Data (BSET)
E1FIXWT Extended Withholding Tax (WITH_ITEM)
Files
Legacy Data On the PC (Frontend)
File to read GL Account info c:\GL_Account.txt
Data for Multiple Source Structures (Sequential Files)
Separator Tabulator
Field Names at Start of File
Field Order Matches Source Structure Definition
With Record End Indicator (Text File)
Code Page ASCII
Legacy Data On the R/3 server (application server)
Imported Data File for Imported Data (Application Server)
Imported Data c:\SYNERGO_CREATE_LCNA_FI_GLDOC_CREATE.lsmw.read
Converted Data File for Converted Data (Application Server)
Converted Data c:\SYNERGO_LCNA_FI_GLDOC_CREATE.lsmw.conv
Wildcard Value Value for Wildcard '*' in File Name
Source Structures and Files
HEADER_STRUCT G/L Account Document Header
File to read GL Account info c:\GL_Account.txt
LINE_STRUCT G/L Account Document Line
File to read GL Account info c:\GL_Account.txt
File content:
Document Header Text Document Type Document Date Posting Date Exchange rate Currency Translation Date Reference
G/L Account document SA 20080401 20080409 1.05 CAD 20080409 Reference
Order G/L Account Cost Center Base Unit of Measure Quantity Profit Center Text Debit/Credit Ind. Amount
44000022 1040 Line item text 1 H 250
60105M01 13431 TO 10 Line item text 2 S 150
800000 60105M01 Line item text 3 S 100
60110P01 6617 H 40 Line item text 4 S 600
44000022 ACIBRAM Line item text 5 H 600
The file structure is as follow
Header titles
Header info
Line titles
Line1 info
Line2 info
Line3 info
Line4 info
Line5 info
Could someone direct me in the wright direction?
Thank you in advance!
CurtisHi,
Thank you so much for yout reply.
For example
i have VBAK(Heder structure)
VBAP( Item Structure)
My file should be like this i think
Identification content Fieldnames
H VBELN ERDAT ERNAM
Fieldvalues for header
H 1000 20080703 swapna
Identification content Fieldnames
I VBELP AUART
Fieldvalues for item
I 001 OR
002 OR
Is this format is correct.
Let me know whether i am correct or not -
DYNP_VALUES_READ Limitations for multiple lines select options
Hi all !
First post here, but a tough one I think. Here is my inquiry :
I have worked on an specific abap function used in many long abap list reports. Theses reports are launched in background processing. The aim of this routine is to stop the report execution if a background job with the same selection parameters is already launched for the current user (to Prevent useless several launch of a time-expensive program).
Because this routine is dynamic, I read the selection screen of the current report with the function 'DYNP_VALUES_READ'. And I compare the result with the variant of the backgroung job (read with function 'RS_VARIANT_CONTENTS').
The real problem is that function "DYNP_VALUES_READ" only extract the first line of select-options. I found an alternative solution to extract the select options values (a dynamic assign with field symbols), but external conversions (for WBS elements for example ) are lost, so the comparison detects differences between the background job's variant values and the current selection screen values.
Does anybody know a way to get entire select options values from a selection screen just as they are displayed on screen ?
Thanks for reading my message
Message was edited by: Thomas BRICOUTThomas,
Perhaps the following code will help you. A function module in the code captures everything on the selection screen into an internal table. It doesn't actually capture the information the way you want it, but I believe you will be able to work with it to achieve your desired result. If it doesn't meet your needs, it is still useful for printing selection screen fields and their values.
Bruce
report zybttes2.
tables: zf137, " 137 General Ledger Document Details Table
zf137a. " 137 General Ledger Document Details Table, Archive
selection-screen begin of block b1 with frame title text-004." BCT003
parameters: p_zf137 radiobutton group xxx, " BCT003
p_zf137a radiobutton group xxx. " BCT003
selection-screen end of block b1. " BCT003
selection-screen begin of block parameter with frame title text-001.
selection-screen skip 1.
select-options: s_date for zf137-zzpostdat.
selection-screen skip 1.
selection-screen begin of line.
selection-screen comment 3(6) text-002.
selection-screen end of line.
selection-screen skip 1.
select-options: s_loan for zf137-zzloan.
selection-screen skip 1.
selection-screen begin of line.
selection-screen comment 3(6) text-003.
selection-screen end of line.
selection-screen skip 1.
select-options: s_ccentr for zf137-zzcostctr.
selection-screen skip 1.
selection-screen end of block parameter.
data: ww(3) type n.
data: zz(3) type c.
data: c1(1) type c value '0'.
do 2 times.
ww = ww + 1.
zz = ww. shift zz left deleting leading c1.
write: / zz.
enddo.
Capture and then print the selection screen fields and their values
data: begin of i_info occurs 20,
flag,
olength type x,
line like raldb-infoline,
end of i_info.
call function 'PRINT_SELECTIONS'
exporting
mode = 'TABLE'
rname = sy-cprog
rvariante = sy-slset
tables
infotab = i_info.
loop at i_info.
write: / i_info-line.
endloop.
write: / 'end'. -
What is the alternative for DisplayMemberPath="Value" for Windows Store applications?
I think there is a bug with Windows Store Applications when it comes to using DisplayMemberPath="Value".
Here is my code
<ComboBox Height="40" VerticalAlignment="Stretch" SelectedValuePath="Key" DisplayMemberPath="Value" x:Name="comboBox1" FontSize="25"/>
var source = new Dictionary<string, double>();
source.Add("Item1", 0.4);
source.Add("Item2", 0.3);
source.Add("Item3", 0.1);
source.Add("Item4", 0.1);
var formateDSource = new Dictionary<string, string>();
foreach (var item in source)
formateDSource.Add(string.Format("[{0}, {1}]", item.Key, item.Value), item.Key);
comboBox1.ItemsSource = source;
If you use this code in WPF in works perfectly. However if you use this code in a Windows Store Application then the Combo Box is empty and an error is thrown. So is there an alternative way to do this in Windows Store Applications and have I unearthed a
bug? Because I have researched the Web for days and found no solution to this.*please do not comment unless you have tried my code as a Windows Store App not a WPF in Visual Studios. Can Someone post an example based on my code that works in Windows Store
Apps please because this is terrible.
ThanksIt looks like you got an answer on SO:
http://stackoverflow.com/questions/29817124/what-is-the-alternative-for-displaymemberpath-value-for-windows-store-applicat
This does look like a bug.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces. -
Creating DataSources for File Source Systems in csv format in sap bw 7.0
Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AMStep 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM IO_MATNAME
MAT001 TEA
MAT002 COFFEE
MAT003 SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!! -
Alternative for HLS HTML streaming trough JW player for users without Flash?
Hello!
I am using HLS TS Streaming trough JW player for the largest group of users that have flash for streaming video's.
Is there an alternative for users without flash?
Best regardsI will just summarize myself...
Adobe media server supports rtmp and HTTP(HLS and HDS)..
for rtmp streaming the swf running in a Flash player is the standard interface...that flash player may be an activeX control/plugin in your browser or may be a standalone player downloaded from adobe website...Chrome web browser however users a slightly different( PPAPI based) flash player(which is different from Adobe flash player) and is developed and maintained by google.
For HLS and HDS, you can either use special players(i.e swfs)(Flash based) developed Adobe by Adobe e.g Strobe meida player(Open Source Media Framework Blog | Adobe’s free and open source media playback system) or you can use players like jwplayer(Video Player Download | JW Player Online Video Player)... Incidentally jwplayer has added simultaneous support for playing rtmp streams too(which is reallly good), but i do not have much insight into workings of jwplayer... -
Alternative for EXEC command(Native SQL)
Hi Friends,
While Using the EXEC command in native sql it is showing the obselete Error , Can any one help with giving the alternative for the commands for native SQl.
ImmediateIn a Native SQL statement, data is passed between the ABAP program and the database using host variables. A host variable is an ABAP variable that is identified as such in the Native SQL statement by a preceding colon (:).
Example
Displaying an extract from the table AVERI_CLNT:
DATA: F1(3), F2(3), F3(3).
F3 = ' 1 '.
EXEC SQL.
SELECT CLIENT, ARG1 INTO :F1, :F2 FROM AVERI_CLNT
WHERE ARG2 = :F3
ENDEXEC.
WRITE: / F1, F2.
To simplify the form of the INTO lists in the SELECT statement, you can, as in Open SQL, specify a single structure as the target area.
Example
Displaying an Extract from the Table AVERI_CLNT:
DATA: BEGIN OF WA,
CLIENT(3), ARG1(3), ARG2(3),
END OF WA.
DATA F3(3).
F3 = ' 1 '.
EXEC SQL.
SELECT CLIENT, ARG1 INTO :WA FROM AVERI_CLNT
WHERE ARG2 = :F3
ENDEXEC.
WRITE: / WA-CLIENT, WA-ARG1.
Native SQL supports the directly-executable commands of your underlying database system. There are other special commands that you can use after the EXEC SQL statement for cursor handling, stored procedures (procedures stored in the database), and connections to other databases.
Cursor Processing -
Alternative for Open , Fetch cursor command
Hi Experts,
I am populating data from glpca table using Open Cursor statement with hold as shown below:
OPEN CURSOR WITH HOLD cur1 FOR
Select data from the purchase order header table.
SELECT runit rprctr sprctr
racct rfarea hsl msl kostl aufnr ps_psp_pnr
FROM glpca
WHERE docnr IN s_docnr
AND rbukrs = p_rbukrs
AND rprctr IN s_rprctr
AND sprctr IN s_sprctr
AND rfarea IN s_rfarea
AND budat IN s_budat
AND kostl IN s_kostl
AND aufnr IN s_aufnr.
Now when i try to Fetch the cursor even restricting it with PACKAGE SIZE command ( value 998), my program get struck over here for 20-30 mins or more den that & session gets out for the user at client end coz of large data. I checked the value of cursor , it was around 670-700 approx.
The query is shown below:
DO.
fetch rows from cursor depending on package size
FETCH NEXT CURSOR cur1 INTO TABLE t_glpca
PACKAGE SIZE p_size.
IF sy-subrc NE 0.
CLOSE CURSOR cur1.
EXIT.
ENDIF.
The program get struck at above fetch next cursor command.
Kindly suggest me some other way to handle or populate the data or any alternative for Cursor command.
Thanks for your consideration.
Regards
MuditSiegfried Boes wrote:
> there is a reason why OPEN CURSOR WITH HOLD is usually used.
>
> Siegfried
Sorry for hijacking this thread and asking here. I am here in the forums on daily basis just reading and learning.
This got me curious and I googled and read SAP tutorial about cursors:
http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb3b23358411d1829f0000e829fbfe/content.htm
also read an answer from Thomas after searching forum:
The combination with OPEN CURSOR ... WITH HOLD allows package processing of tasks that require a database commit inside the loop. A normal SELECT loop without holding the cursor would be interrupted by a commit -> short dump.
MY TWO QUESTIONs
1. In SAP tutorial it states that
"WITH HOLD addition in the OPEN CURSOR statement allows you to prevent a cursor from being closed when a database commit occurs in Native SQL"
If I don't specify any commit statements in my abap code and user cursor without the addition with hold.
Can a commit be executed anyway and I get an unwanted commit and thus an unwanted close of my cursor?
Or do they mean that "if you specify commit in native sql"?
2. Thomas says a normal select loop without the cursor holding would be interrupted. Interrupted by who? Again, it seems like there is an "unwanted" commit here? Again, can there be any commits and unwanted interrupts if I dont specify it somewhere in my code?
regards
Baran
Edited by: Baran Sölen on Feb 25, 2009 11:39 AM -
Alternative for Pooled table M_VMVLA in ECC 5 version
Hi,
Pooled table M_VMVLA in version 3.1i does not exist
in ECC 5.Can anyone tell me the alternative for this?
<b>Pool/cluster M_VMVL in 3.1i version</b>
Helpful answers will be rewarded
Thanks
KiranHai Kiran
Check the following Code in program 'RVV50L21'.
the following Code is present in ECC 5.0
select * from <b>shp_idx_gdsi</b> where wadat in i_datum "470
and vstel in i_vstel
and route in i_route
and vbeln eq vttp-vbeln.
simillar code in 3.1 version is
select * from <b>m_vmvla</b> where wadat in i_datum
and vstel in i_vstel
and route in i_route
and vbeln eq vttp-vbeln.
Replacent table for m_vmvla is shp_idx_gdsi
Regards
Sreeni -
Alternative for extractor 2LIS_02_S013 Vendor Evaluation InfoCube 0PUR_C02
Hi BW Gurus
Could some one advise me any alternative for 2LIS_02_S013 (Vendor Evaluation).
Vendor evaluation data is required for my customer.
At present 0PUR_C02 (Vendor evaluation) deactivated. due to miss match of fields S013, S013BIW1 and S013BIW2.
We are facing MIGO posting error update terminated. Now i had deactivated S013 at LBW0.
We already tried as per SAP note Note 115192 and 818652.
But thre is no use.
Look forward to your valuble replays and points will be awareded .
ThankyouHi,
There is no alternative alternative for 2LIS_02_S013 to upload the cube 0PUR_C02
But I hope, we can replace the cube 0PUR_C02 with 0PUR_C05 .0PUR_C05 gets the data by the data source 0MM_PUR_VE_01.
http://help.sap.com/saphelp_nw04/helpdata/en/e7/daba37d4c2503ee10000009b38f842/frameset.htm
With rgds,
Anil Kumar Sharma .P -
Alternative for TouchBegan ,TouchMove & TouchEnd ?
hi.....Every one.
I want to know about alternative for Touch Began ,TouchMove ,TouchEnd for Events .
I need this requirement in my application .
I am working with TouchBegan &TouchMove & TouchEnd in my Project.
but i dont want to use thse Methods in everytime when ever i required.
Example like............
I have an object that is SELECTED or not .how can i acheive this
Is it right way what i am asking to yours ?I came across this at one of the forums.
http://www.html5canvastutorials.com/labs/html5-canvas-animals-on-the-beach-game-with-kinet icjs/#comment-35389
I'm just not too sure how to adapt it for Adobe Edge. Someone ever had this problem before?
Thank you.
Maybe you are looking for
-
IPhone 4 battery drains really fast and phone gets really hot
I have an iPhone 4 and since November 15 my battery has been draining really fast and gets really hot when I use the phone. When I try to charge the phone with my computer it doesn't charge, but only charges with the wall hub. I have tried deleting t
-
Invalid characters error while ODS activation
I have 2 queries regarding Invalid characters 1) I got following error while activating ODS. Value 'HYDERABAD - IV COMMISSIONERATE ' (hex. '48594445524142414420<b>2D</b>204956A020434F4D4D495353494F') of characteristic ZEXCRG contains invalid cha
-
Error handling in File content conversion
In our project , we are converting Flat file to XML by adapter modules ... File is like this : HEADER 123 567 DETAIL UWERU AASD fftk DETAIL UWERU AASD fftk DETAIL UWERU AASD fftk DETAIL UWERU AASD fftk FOOTER File has been succesfully converted to XM
-
Acrobat does not render text of manually created minimal PDF
I have made a minimal PDF, but the text string is not rendered when opened in Acrobat. (PDF code, without newlines, here: %PDF-1.1 1 0 obj <</Type /Catalog /Pages 2 0 R>> endobj 2 0 obj <</Type /Pages /Kids [3 0 R] /Count 1 /MediaBox [0 0 300 100]>>
-
Output not sorted when using group by clause
Recently we migrated our application from Forms5 to Forms10g and database from 7.3.2 to 10gR2. More than 400 applications using sql stmt with "group by" clause and without "order by". In Earlier version of oracle 7.3.2 "group by" clause in SQL stmt s