Alternative of challan mapping

Dear all
we have not used the challan mapping in SAP because the quaterly return of the form 24Q is out side of the system. I have to genrate the Form 16 from the SAP system. how I can display the information of DETAILS OF TAX DEDUCTED AND DEPOSITED IN THE CENTRAL GOVERNMENT ACCOUNT THROUGH CHALLAN.
if there is any file for upload then Request you to share the format for the New Form 16 2010 as well as old format of form 16
Please guide me on this.
regards
Ankit Vasavada

Hi swapnil
Thanks for reply.
I want the format of Tax details file which we can pass on the selection screen. because we are not using the tcode PC00_m40_cmap.
how I can display the tac details in form 16. or I can map the details now also as quaterly return is already filed for the year 2010.
thanks again
Regards
Ankit Vasavada

Similar Messages

  • Issue with challan mapping utility

    Hi,
    We are upgrading to new ECC 6 version.
    The challan mapping program PC00_M40_CMAP ,when executed with details of challan no and tan no and payroll area with pyrl period , results in showing correct challan amount with 0 personnel nos mapped.
    What do I do....?
    We are at  support pack 41 and CIN 41.
    What is to be done next???
    Shankar

    While debugging the program I found out that in include PUMAPIN5,Abkrs is not passed as a parametre for structure PME01.As a result the TAN number value from feature is not being fetched.Pls let me what is correction note instruction or any other solution.
    PUMAPIN5
    FORM GET_TAN_NUMBER CHANGING P_TAN_NUMBER.                                                                               
    LOOP AT P0001 WHERE BEGDA LE PAYDATE             "PKT01290595    
                      AND ENDDA GE PAYDATE.                            
      ENDLOOP.                                                         
              PME01-BUKRS = P0001-BUKRS.                               
              PME01-WERKS = p0001-WERKS.                               
              PME01-BTRTL = p0001-BTRTL.                                                                               
      Get the employer details from feature 40ECC                    
         CLEAR: ECC_TAB, TAN-NUMBER.                                   
         REFRESH ECC_TAB.                                              
         CALL FUNCTION 'HR_FEATURE_BACKTABLE'   
                    EXPORTING                                          
                    FEATURE                     = '40ECC'         
                    STRUC_CONTENT               = PME01           
                    KIND_OF_ERROR               = '3'             
               TABLES                                             
                    BACK                        = ECC_TAB         
           CHANGING                                           
                STATUS                      =                 
              EXCEPTIONS                                          
                DUMMY                       = 1               
                ERROR_OPERATION             = 2               
                NO_BACKVALUE                = 3               
           IF SY-SUBRC = 0.                                         "#EC *  
             CLEAR ECC_TAB.                                                 
             READ TABLE ECC_TAB INDEX 3.                                    
             TAN-NUMBER = ECC_TAB-BACK+0(15).                               
           ENDIF.                                                           
      ENDFORM.                    " GET_TAN_NUMBER

  • Issue with challan mapping

    Hi All,
    During challan mapping, while executing the 4th step (I.e; futher processing) normally on the right side of the screen which is for Tax Deduction Details table, all the employees mapped will be displayed.  But in my case that entire coloum is empty. could anyone help me with this issue?  Also the following note is not implemented yet.  please advice if this is required:
    Note 1580248 - SAP_HR CLC - IN 2011 (Legal changes for Form 16 FY 2010-11)
    regards,
    Ayyaps
    Edited by: Ayyaps sukumar on May 17, 2011 12:04 PM

    HI,
    Please make sure your current SP level should be 66 and applied the following notes
    a) 1528165
    b) 1546949
    c) 1520182
    d) 1566288
    e) 1568324
    f) 1573538
    g) 1576504
    h) 1573538
    i) 1571048
    j) 1580476
    Also, make sure, feature 40ECC & 40ACK are maintained.
    Regards

  • Challan Mapping - Alphabets in Cheque No -  Not accepting -Error

    Hi
    I have problem in Challan Mapping Utility (PC00_M40_CMAP) Program.  During the data entry in the field of Cheque /DD no  if we gives the cheque number  with alphabets  for eg.CK601203 the system is not accepting the entry and  giving an Error Message as Enter a numeric Value.  When ever TDS has remitted through Electronic method system will generate a number.  Alphabets prefixes the number.  This number is the substitute for the Cheque no.
    Request for the solution to the problem.  Any notes has released for this etc.
    Thanks & Regards
    EKP Yadav
    Mobile:9000184456

    Hi,
    U can just maintain the numeric no and the BSR code will determine the Bank & Branch code.
    We use to maintain the same the Numeric number only, as our client was also using electronic clearing .CK is the prefix.
    Else Pls. report this to SAP to realese a note or provide any other solution.
    Regards
    Hemant V. Mahale
    Edited by: Hemant Mahale on Mar 13, 2009 4:51 PM

  • Suggested alternative to key mapping?

    Hello!
    I started using Abelton live for putting together easily accessible virtual instruments for live performance. For example, if my band performs the entire Dark Side of the Moon album, I can create each song in order of the album with the necessary pianos,synths, and organs for each and easily enable/disable them with the use of key mapping (assigning on screen functions to keys on my laptops keypad, just to be thorough) I have a M-Audio Keystation 61 which is a very simple midi controller and doesn't have any knobs for a lot of on screen control. So the use of key mapping is important for me.
    I like the layout and simplicity of Mainstage and would rather use it for this sort of thing, but without key mapping I have no quick way of (for example) muting and unmuting instruments within each song/performance other than trying to do it with the mouse, which is too sketchy for live performance.
    Also with Abelton, I could assign the volume slider on my midi controller to multiple channels/instruments, i.e. control volume for 2 or 3 instruments at once, mainstage only lets me assign one on screen function per project to a single midi hardware control
    I don't know a ton about Mainstage, so my questions are ...
    1. Is there an alternative to key mapping for mainstage?
    2. Is it possible to assign multiple on screen functions to one hardware control?
    Thanks!

    Hi
    Lootinant wrote:
    1. Is there an alternative to key mapping for mainstage?
    If you are 'short' of buttons/switches on your keyboard controller, you could create screen-controls assigned to (say) the lowest notes on your keyboard, and then map them to Next/Previous patch Actions in order to change Patches in MS.
    Lootinant wrote:
    2. Is it possible to assign multiple on screen functions to one hardware control?
    Multiple mappings are possible via the Screen Control Inspector (or the new Assignments and Mappings Pane). Select the Screen Control, and in the Inspector click the '+" button (top right of the Inspector) to add an additional mapping.
    CCT

  • CHALLAN MAPPING REVERSAL (Indian  Payroll).

    Hi Experts,
    Can any one provide me the documents  for CHALLAN MAPPING REVERSAL (Indian  Payroll).
    Or else can any one provide the step to follow for Reversal of challlan mapping.
    Thanks and Regards
    Ankita Sahu

    Hi,
    Please verify whether SAP notes 1301243 or 1307615 are properly implemented in tcode SNOTE as these should resolve this problem.
    Regards,
    Kanupriya

  • Challan Mapping

    Dear Team,
    My client is in process of challan mapping through pc00_m40_cmap. Client is using first time challan mapping, having two payroll areas but the tax is deposit in single challan.
    Client has completed the three steps and save, personal number mapped shown zero, whether it is correct or not,  can we change if require? 
    Kindly suggest:-
    How to map two payroll areas
    How to use feature -40ACK , 40ECC
    Thank you!
    Regards,
    Rakesh

    ok
    check the below process:
    For Annexure A form 24Q from the Form16 we need to update the Challen details for every month of every Employee who are taxable.
    Steps:
    PC00_M40_CMAP
    PC00_M40_F24Q
    PC00_M40_F16_1
    Pre requisites:
    Updation of all Employees master data IT 0185 sub-type 05 Tan details (Employer TAN Number).
    Collect the Challen details, Total amount, Cess amount, date of deposited, Bank Branch details.
    PC00_M40_CMAP
    Give Payroll Area, Payroll Period, select Regular run / Off cycle run
    Click on Next button
    Give TAN No. and click on Next button
    Enter the details like Challen no., voucher no., Challen date, Cheque / DD no., Tax Amount, Surcharge, Edu cess, Total Challen amount and Bank branch no.
    Click on Save and click on Next button
    Double click on step.4
    Give Company code, Personnel Area, Payroll Area and Execute
    you get the details of the challan with amount in left side and in right side all Employees in the Payroll area. if challan amount is sufficient for all the employee's done it will give the message that sufficient to map all the employees.
    And select both sides and click on arrow marks
    you will get the message all selected employee's are mapped.
    and screen shown like this
    Then click on Review button on the top left hand side and save
    Message will show challan mapping details have been saved.

  • Challan Mapping (TesmSe file not generated)

    Dear Expert's
    We are running PC00_M40_CMAP for challan mapping.
    Challan mapped succesfully and save  it also.
    But not generated TemSe file.
    After executing PC00_M40_F24Q challan detail is not coming.
    Please suggest me.
    Thanks & Regards
    Neelesh Sonkar

    Hi Neelesh,
    I am also facing the same problem that challan details are not appearing in form-16
    Could you please guide me the process to get challan deatils in Form_16
    It would be great if you send me the full process
    Awaiting for your response
    Thanks
    Cheera

  • Challan mapping not happening for employees belonging to certain per. area

    Hi,
    we are facing a problem with challan mapping for employees belonging to certain personnel areas.
    For other it is happening correctly.
    Any suggestion for the above issue?
    thanks,
    Ayyaps

    Hi,
    Check the feature 40ECC for the Personnel Areas for which challan mapping is not being done. The TAN returned through this feature should be same as the one used in the second screen of challan mapping. If both the TAN matches, then only you will be able to map challan with the employees.
    VK

  • Challan  mapping issue

    Hi,
    I have an issue in challan mapping. We forgot to update bank branch code for some employees ( challan mapping program )  in the month of may and June . Now when we run the form 16,  3rd page is showing u2018000000u2019 for some employees
    My queries is that
    1.     Is there any table where we can maintain this entries manually
    2.     or , we have to do reverse challan details and do it again
    Regards,
    Prasath

    Best option is to reverse the challan mapping for the employees who are getting the this. Try to unmap them and map again with correct set of data. While mapping again you need to take care that you are mapping the employee to the same challan with which you have filed the e-file.

  • Error in challan mapping

    Hi All,
    I am running the T.Code : pc00_m40_cmap i.e. challan mapping . Employees for the 3 quarters have been successfully mapped but for the last quarter 1 employee is missing as the balance amount to be mapped equals this employees /460 WT amount.
    Please suggest any solution to this problem .
    Regards

    Hi,
    If you know the employee for which challan mapping is skipped, you can execute the utility again and enter only that employee in step 4. MAp the same and save it. Also note that you don't need to re-enter the challan details as it is already present.
    In case you want to cross verify whether employee is really left out or it is mapped, you can go and check the PCL4 cluster (via tcode SE11 or SE16) with Rel ID I1. Now you can search with the employee, if emp is mapped for the particular period then there will be an entry for the pernr with TAN no and period begda and endda.

  • Alternatives to Nokia Maps (Google / Navigon Mobil...

    For my N82 I am looking for an alternative to Nokia Maps.
    - Using Google Maps, is it possible do download the map data for a country or continent to the pnone's memory card in advance so that they do not have to be loaded on the fly over the expensive GSM connection?
    - Has anybody tried Navigon's Mobile Navigator on an N82? How well does it work?
    - Are ther any other 'recommendable' map programs for the N82?
    Andreas

    28-Sep-2008 06:23 AM
    avoelp wrote:
    Are ther any other 'recommendable' map programs for the N82?
    Andreas
    Hi avoelp
    Garmin XT seems to be attracting favourable reviews:
    http://www8.garmin.com/mobile/mobilext/
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Removing complete Challan Mapping data from system

    Dear Consultants,
    My client has entered erroneous data for challan mapping. When I checked the data, I found that there is some difference in the Challan amount & available amount. It means there are some employees mapped for these challans. but the main page of CMAP shows employees mapped = 0. When I tried to delete the challan data, system says, there are some employees mapped to these challans.
    When on the last node of CMAP, I tried to select all employees on the right hand & click on the arrow from right to left, no amount of challans was changed.
    May I know how to delete the entire mapping data from the system?
    regards,
    Bindumadhav

    Dear MVR,
    The reply by Mr.Deepak is as follows. :
    Dear,
    Regarding your query, the issue reported by you basically happens due to inconsistent mapping or unmapping of the employees to the Challan.
    We would suggest you to kindly delete of the negative entry from the table 'T7INTE'. You also need to delete the entries from the table PCL4 as well for the corresponding challan for which the negative entry has been created. Performing the above suggested steps will remove the reported inconsistencies. After deleting the entries completely, kindly perform the Challan mapping for the employees again. Please make sure that you are not deleting the entry from the table for which Form24Q
    has already been generated. The deletion process can be explained as such:
    1. Execute the transaction 'se16'. Go to the tables mentioned above. You can execute the table 'T7INTE' with the TAN number. On execution, a negative entry will be displayed for a particular challan. Select that entry and delete of the entry from the table.
    2. Go to table PCL4. Execute the table with relid as 'I1' to 'I2' and the TAN number in the field 'SRTFskindly performing the mapping action again. Hopefully, following the above mentioned steps will resolve the reported inconsistency and you will be able to perform the mapping successfully.
    Best Regards,
    Deepak..
    I can see some entries. But the system does not allow me to delete the table entry from T7INTE & PCL4.
    Regards,
    Bindumadhav

  • Alternative to parameterized mapping

    Hello,
    We are in
    Service Pack: 08
    Release: NW711_08_REL
    Scenario : File to IDOC
    We are using parameterized mapping for this scenario and we have configured some values in the interface determination in parameter for Operation Mapping. During the transport there are chances of overwriting the same in the QA or Prod system. Also sometime it is difficult to maintain all these values manually in the respective systems.
    Is there a better way we can handle this situation? Or is there a better alternative to the parameterized mapping?
    Thanks
    SK

    Have you consider the Value Mapping approach?
    http://www.riyaz.net/sap/xipi-value-mapping-using-graphical-editor/382/
    http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5

  • Alternative Voices for Maps App

    the same womans voice everyday giving me directions, and no i dont mean my wife. i need to hear a new voice on my maps app. are there any alternate voices that can be downloaded and if so where I cant find any.

    There are none

Maybe you are looking for