Alternative Ports for Firewall

The hotel I'm staying at has the port blocked. Are there alternative ports anyone would recommend???
Thank you!!!!

text Chatting or A/V
Text Chatting - Go to iChat > Preferences > Accounts > Server settings Set the port to 443
A/V ports can not be changed.
Leopard will get round the 5060 issue.
11:08 PM Wednesday; November 21, 2007

Similar Messages

Ports for Firewall rules

Hi,
can anybody point out which ports are to be opened on firewalls ?
Im am using a SunMC 4.0 server/console/agent on a v240 and need to monitor systems located behind firewalls.
Also NATing is involved.
I would like to know which ports I have to open from agents to server (and vice versa) and from server to java-console on a PC (and vice versa)

Hi,
You need to open firewall ports from 161-168. Also take a look at /var/opt/SUNWsymon/cfg/domain-config.x and make sure to open any ports within the "snmpPort" line of that file.
Take a look at this post on how to configure firewall ports for console to server communication: [http://forums.halcyoninc.com/showthread.php?t=7]
If you still have problems with adding the agents, you can take a look at the following post on troubleshooting agent icon creation: [http://forums.halcyoninc.com/showthread.php?t=92]
If you are using agents in NAT mode, it may not work very well as alarms would not show in the alarms tab. Please take a look at the following posts regarding this issue:
[http://forums.halcyoninc.com/showthread.php?t=186]
[http://forums.sun.com/thread.jspa?forumID=854&threadID=5363460]
Pegah Garousi, Halcyon Monitoring Solutions
[email protected]
http://www.HalcyonInc.com

Ports for Firewall in Leopard

I have a question about how to open ports in Leopard's firewall. I have been having issues with iChat AV and Sightspeed that point to Leopard's firewall settings, but I am at a loss as to how to set ports.
I have a long history of trying to make iChat AV work for myself and for my friends and family, and I have long used the very helpful tips and suggestions provided by Ralph Johns and others. My current situation is this: I recently upgraded my iMac G5 to Leopard, and have successfully used iChat AV with several contacts, both before and after the upgrade. A friend recently purchased a new Intel iMac, and we cannot use iChat AV, and I suspect it is an ISP port blocking issue on his end, which he is attempting to check out. Meanwhile, I have had him download Sightspeed, and we have successfully used it to video chat using my MacBook with Tiger. However, when I try to video chat using Sightspeed on my iMac G5 with Leopard, I get an "Error: 503" message, which Sightspeed says may be related to firewall issues. Previously, I have used Sightspeed successfully using my iMac G5 with Tiger, and without any configuration issues. Since my MacBook uses my wireless home network, and can connect with Sightspeed, and since my iMac G5 USED to connect with Sightspeed before Leopard, I am leaning towards Leopard's firewall as the culprit. I want to make sure Leopard's firewall is allowing both incoming and outgoing Sightspeed traffic, but I don't know how to configure the firewall. Of course, I am always open to other troubleshooting ideas.
Thanks in advance for any suggestions, Tom

The Leopard Firewall is now in System Preferences > Security.
The Allow Specifics setting needs to set anew if the 10.5.1 update has been done since any Allow Specifics was set.
It works on a application basis. Each app in the list is given what is called a Certificate by the OS and any ports it uses is then allowed.
So it needs to be set for iChat and Sightspeed.
9:01 PM Sunday; January 13, 2008

Can't set port for IRC in Sharing/Firewall preferences...

I turned on the firewall and was able to specify ports for Bittorrent, but I want to use IRC (it keeps getting blocked, which I'm assuming has something to do with the firewall which I just activated), so I went into System Preferences-->Sharing-->Firewall, scrolled down to IRC and then Edit, for TCP number it has 194 (but grayed out) and UDP it's blank, but I can't alter either entry box.
It's my computer and I have whatever access privileges I need (I think) so at a loss here. Can anyone point me in the right direction?
P.S. Some of the IRC servers I wanted to set up accounts with had port listings of 6667 and the like, that's also why I wanted to specify the number.

Create a new entry with a name such as IRC #2 and add the desired ports to that entry. You cannot alter the ports assigned to the default entries; you need to create new ones to specify additional ports.
(15661)

Alternative VIs for In Port.vi and Out Port.vi for 64 bit Windows 7 platform

Hi Need to use the printer port for my application. In Port and Out Port VIs was the simplest option in 32 bit Windows XP machine. Now I hear In Port and Out Port VIs are not supported in 64 bit Windows ( VISTA/7) machine. Is there any working alternative to In/Out Port.vi ??
Thanks in Advance
RKB
Solved!
Go to Solution.

VISA can easily be used to solve your problem. If using a USB -> Serial adapter it's almost too easy.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Firewall Port for DHCP 2012 R2 Failover (Load Sharing mode)

Hi Everyone,
I was wondering if anyone can help me with finding a document for required Firewall Ports for DHCP 2012 R2 Failover (Load Sharing mode)
or just confirm if this is correct or not ?
TCP 647 for
DHCP failover messages between DHCP servers
TCP/UDP 67 and 68 initiate communication between the client and server
I am not sure if there is anything else
thanks in advance
Reza Negarestani

it was for a technical design document and I put this table for Firewall requirements what do you think ?
Direction
Port(s)
Bidirectional
TCP 647
Bidirectional
TCP 2535
UDP 2535
Bidirectional
TCP 67
TCP 68
UDP 67
UDP 68
Reza Negarestani

Needed port for BI -firewall problem

hi,all:
    i am on a POC project and the version is bi 4 sp04 . now we encounter a firewall problom.
    the customer has a strict firewall policy. so we can't ask them to shut down the firewall. they can just apply the useful port access for test.
    now the port 6400~6410、50000、8080、8005、3690 is available and we can log on CMC and Launchpad.but we can't log on client tools. (we have tested this in a no firewall enviroment, there is no problem)
    which port should we apply for BI or any other advise?
regards!
Ad

Here is what you need to do:
Make sure the firewall is turned off:
1: Use a Tool like NetMon or Wireshark on client Machine to check the ports that Client tool is connecting to in all the workflows e.g. Login, import, export etc.
2: Go to the server and check the services that are listening on these ports.
On server, you may run a command ( netstat -anb >> output.txt)
List down all the services for the ports listed in point 1
3: Assign request ports for these services between 6401 -6410.
Turn on the firewall.
You should be able to log in now with Firewall On.
Regards,
Animesh Kumar

Closed port for torrent with no iptables.rules

I have a home system with internet connection over a router. Firewall in the router seems to be disabled. I had installed guarddog and selected all the protocols that I need. There is no iptables in deamons line of rc.conf nor there is any iptables.rules files. There are 2 files in /etc/iptables, empty.rules and simple_firewall.rules. So, I wonder if any firewall is working at all in my system since guarddog is a frontend to iptables (i guess) and also is there any need for firewall since almost all the ports are closed.
Secondly, the main issue. I was using ktorrent and it was working fine until a few days ago. Now, bittorrent is not working. its not connecting at all. I tried deluge from community repo and tested the ports with http://www.deluge-torrent.org/test-port.php?port=6881 and it gave me this result:
TCP port 6881 closed on 121.247.200.189
UDP port 6881 open on 121.247.200.189
121.247.200.189 seems to be the ip of my isp as I got a dynamic one.
I am able to reach surf net but not able to download using bitorrent, however, both is possible in windows.
Taking clue from forum, i did nmap.
nmap on my router
[shantanu@bluehead ~]$ nmap 192.168.1.1
Starting Nmap 4.20 ( http://insecure.org ) at 2007-06-25 20:49 IST
Interesting ports on 192.168.1.1:
Not shown: 1679 filtered ports
PORT STATE SERVICE
21/tcp open ftp
23/tcp open telnet
53/tcp closed domain
80/tcp open http
443/tcp closed https
554/tcp closed rtsp
1755/tcp closed wms
2401/tcp closed cvspserver
5000/tcp closed UPnP
5001/tcp closed commplex-link
5050/tcp closed mmcc
6881/tcp closed bittorent-tracker
6969/tcp closed acmsoda
7070/tcp closed realserver
8000/tcp closed http-alt
8080/tcp closed http-proxy
8888/tcp closed sun-answerbook
11371/tcp closed pksd
Nmap finished: 1 IP address (1 host up) scanned in 27.653 seconds
nmap on my ip
[shantanu@bluehead ~]$ nmap 192.168.1.5
Starting Nmap 4.20 ( http://insecure.org ) at 2007-06-25 20:48 IST
Interesting ports on 192.168.1.5:
Not shown: 1696 closed ports
PORT STATE SERVICE
6000/tcp open X11
Nmap finished: 1 IP address (1 host up) scanned in 0.519 seconds
nmap on isp's ip displayed above.
[shantanu@bluehead ~]$ nmap 121.247.200.189
Starting Nmap 4.20 ( http://insecure.org ) at 2007-06-25 20:50 IST
Interesting ports on 121.247.200.189.bang-dynamic-bb.vsnl.net.in (121.247.200.189):
Not shown: 1679 filtered ports
PORT STATE SERVICE
21/tcp open ftp
23/tcp open telnet
53/tcp closed domain
80/tcp open http
443/tcp closed https
554/tcp closed rtsp
1755/tcp closed wms
2401/tcp closed cvspserver
5000/tcp closed UPnP
5001/tcp closed commplex-link
5050/tcp closed mmcc
6881/tcp closed bittorent-tracker
6969/tcp closed acmsoda
7070/tcp closed realserver
8000/tcp closed http-alt
8080/tcp closed http-proxy
8888/tcp closed sun-answerbook
11371/tcp closed pksd
Nmap finished: 1 IP address (1 host up) scanned in 30.573 seconds
Everywhere the bittorrent port seems to be closed. [b]How do I open this port?.[b/]
Last edited by ravisghosh (2007-06-25 21:09:55)

@madeye, first of all I used utorrent in Then I tried as you [shantanu@bluehead Chain INPUT (policy DROP)
target prot opt source ACCEPT 0 -- anywhere ACCEPT udp -- anywhere ACCEPT 0 -- 192.168.1.5 logaborted tcp -- anywhere ACCEPT 0 -- anywhere ACCEPT icmp -- anywhere ACCEPT icmp -- anywhere ACCEPT icmp -- anywhere nicfilt 0 -- anywhere srcfilt 0 -- anywhere Chain FORWARD (policy DROP)
target prot opt source ACCEPT 0 -- anywhere ACCEPT icmp -- anywhere ACCEPT icmp -- anywhere ACCEPT icmp -- anywhere srcfilt 0 -- anywhere Chain OUTPUT (policy DROP)
target prot opt source ACCEPT 0 -- anywhere ACCEPT udp -- anywhere ACCEPT 0 -- anywhere ACCEPT icmp -- anywhere ACCEPT icmp -- anywhere ACCEPT icmp -- anywhere s1 0 -- anywhere Chain f0to1 (3 references)
target prot opt source ACCEPT udp -- anywhere ACCEPT icmp -- anywhere ACCEPT tcp -- anywhere logdrop 0 -- anywhere Chain f1to0 (1 references)
target prot opt source ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT udp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT udp -- anywhere ACCEPT tcp -- anywhere ACCEPT udp -- anywhere ACCEPT icmp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere ACCEPT tcp -- anywhere logdrop 0 -- anywhere Chain logaborted (1 references)
target prot opt source logaborted2 0 -- anywhere LOG 0 -- anywhere Chain logaborted2 (1 references)
target prot opt source LOG 0 -- anywhere ACCEPT 0 -- anywhere Chain logdrop (4 references)
target prot opt source logdrop2 0 -- anywhere LOG 0 -- anywhere DROP 0 -- anywhere Chain logdrop2 (1 references)
target prot opt source LOG 0 -- anywhere DROP 0 -- anywhere Chain logreject (0 references)
target prot opt source logreject2 0 -- anywhere LOG 0 -- anywhere REJECT tcp -- anywhere REJECT udp -- anywhere DROP 0 -- anywhere Chain logreject2 (1 references)
target prot opt source LOG 0 -- anywhere REJECT tcp -- anywhere REJECT udp -- anywhere DROP 0 -- anywhere Chain nicfilt (1 references)
target prot opt source RETURN 0 -- anywhere RETURN 0 -- anywhere RETURN 0 -- anywhere logdrop 0 -- anywhere Chain s0 (1 references)
target prot opt source f0to1 0 -- anywhere f0to1 0 -- anywhere f0to1 0 -- anywhere logdrop 0 -- anywhere Chain s1 (1 references)
target prot opt source f1to0 0 -- anywhere Chain srcfilt (2 references)
target prot opt source s0 0 -- anywhere That means iptables I removed guarding Removed iptables and Last edited by thanks a lot for such elaborate help.
windows and u r very much right that it uses UPnP. In deluge (bt client on arch), UPnP was there but disabled (shaded). Hence, I tried running utorrent using wine and it gave a error message "Unable to map UPnP port' and is not able to connect. So, UPnP is not working in my box.
suggested "iptables -L" and it gave me the following results.
~]$ sudo iptables -L
destination
anywhere
anywhere udp spt:bootps dpt:bootpc
192.168.1.255
anywhere state RELATED,ESTABLISHED tcp flags:RST/RST
anywhere state RELATED,ESTABLISHED
anywhere icmp destination-unreachable
anywhere icmp time-exceeded
anywhere icmp parameter-problem
anywhere
anywhere
destination
anywhere state RELATED,ESTABLISHED
anywhere icmp destination-unreachable
anywhere icmp time-exceeded
anywhere icmp parameter-problem
anywhere
destination
anywhere
anywhere udp spt:bootpc dpt:bootps
anywhere state RELATED,ESTABLISHED
anywhere icmp destination-unreachable
anywhere icmp time-exceeded
anywhere icmp parameter-problem
anywhere
destination
anywhere udp dpts:6970:7170
anywhere icmp echo-reply
anywhere tcp spts:1024:65535 dpts:6881:6889 state NEW
anywhere
destination
anywhere tcp spts:1024:5999 dpt:6969 state NEW
anywhere tcp spts:1024:5999 dpt:http state NEW
anywhere tcp spts:1024:5999 dpt:http-alt state NEW
anywhere tcp spts:1024:5999 dpt:8008 state NEW
anywhere tcp spts:1024:5999 dpt:8000 state NEW
anywhere tcp spts:1024:5999 dpt:8888 state NEW
anywhere tcp spts:1024:5999 dpt:ftp state NEW
anywhere tcp spts:1024:5999 dpt:https state NEW
anywhere tcp dpt:rtsp state NEW
anywhere tcp dpt:7070 state NEW
anywhere tcp spts:1024:5999 dpt:cvspserver state NEW
anywhere tcp dpt:1755 state NEW
anywhere udp dpt:1755
anywhere tcp spts:1024:5999 dpt:11371 state NEW
anywhere tcp spts:1024:5999 dpt:5050 state NEW
anywhere tcp spts:1024:5999 dpt:telnet state NEW
anywhere tcp spts:1024:5999 dpts:5000:5001 state NEW
anywhere udp spts:1024:5999 dpt:5000
anywhere tcp dpt:domain state NEW
anywhere udp dpt:domain
anywhere icmp echo-request
anywhere tcp spts:1024:5999 dpt:5222 state NEW
anywhere tcp spts:1024:5999 dpt:5223 state NEW
anywhere tcp spts:1024:5999 dpts:6881:6889 state NEW
anywhere
destination
anywhere limit: avg 1/sec burst 10
anywhere limit: avg 2/min burst 1 LOG level warning prefix `LIMITED '
destination
anywhere LOG level warning tcp-sequence tcp-options ip-options prefix `ABORTED '
anywhere state RELATED,ESTABLISHED
destination
anywhere limit: avg 1/sec burst 10
anywhere limit: avg 2/min burst 1 LOG level warning prefix `LIMITED '
anywhere
destination
anywhere LOG level warning tcp-sequence tcp-options ip-options prefix `DROPPED '
anywhere
destination
anywhere limit: avg 1/sec burst 10
anywhere limit: avg 2/min burst 1 LOG level warning prefix `LIMITED '
anywhere reject-with tcp-reset
anywhere reject-with icmp-port-unreachable
anywhere
destination
anywhere LOG level warning tcp-sequence tcp-options ip-options prefix `REJECTED '
anywhere reject-with tcp-reset
anywhere reject-with icmp-port-unreachable
anywhere
destination
anywhere
anywhere
anywhere
anywhere
destination
192.168.1.5
192.168.1.255
bluehead.localdomain
anywhere
destination
anywhere
destination
anywhere
is not disabled and that firewall rules are setup by guarddog.
using "pacman -Rns guarddog" and rebooted. Still get the same results with utorrent and "iptables -L" and also the port test shows tcp 6881 is still closed.
now bt clients seems to be able to connect and it works; however, port test still shows tcp 6881 closed.
ravisghosh (2007-06-27 16:51:12)

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is off

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is turned off.. Any ideas?

Thanks Rudegar,
I only synch and do not stream off of my 1st Gen AppleTV
I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
Will keep working on other fix options (factory reset, etc.)
Thanks again

How to configure Mail to use different ports for POP and SMTP?

I am trying to configure Mail for my AT&T account. It requires me to configure POP (incoming) mail for port 995, and SMTP (outgoing) mail for port 465. However there doesn't seem to be an option to configure different ports for these. Is that correct, or am I missing something?
Alternatively can I configure two accounts, one for POP incoming and one for SMTP outgoing? My incoming POP account does work, but in configuring an outgoing account I still have to configure a POP server name and that will not work for the outgoing port.
Any advice on how to solve this would be appreciated.

Understand. It is really quite easy to do in Mail, too. Kappy told you how to set up the smtp piece. I gave you pop info. These two things are on different panels within Account Preferences.
To recap his and my posts
SMTP:
In Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, in the lower portion, you see an smtp server menu. Open it and select edit. Select Edit Server, then click on its Advanced tab. Set up port 465 with SSL.
POP:
This is on a different panel in Mail PRefs Accounts. Now in Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, you see three tabs, acc't info, mbox behaviors, and Advanced. This is where things are different than for smtp. You are going to configure stuff on a different "advanced" panel than where you were for the smtp stuff. Click on the advanced tab. There is a field for port with a SSL checkbox next to it and an authentication drop down menu. Check the box and it should quickfill change from 110 to 995. Autentication drop down is probably already default to password.
Did you visit the URL I gave you previously? It even gives you screen shots.

Windows Server 2008 opening ports for sql

Hello we upgraded our server from 2003 to 2008 and we are trying to open up the ports for the sql server and reporting services so the users can access both database and report manager from their desk. we only have one location so its not like we
need people from different locations accessing it. but for some reason the users still cant access the database even after opening ports 1433 and 80. Can anyone help please

Hi
Can you explain why does he need turn off the firewall on prod. server? Running SQL
Browser service make sense if we use named instance, the OP did not mention that. Moreover if we enable SQL Browser
service we probably need to add UDP port 1434 to the firewall.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Do we have any default port for XI?

Hi All,
Could you please tell me how to check whether XI is installed or not?
Do we have any default port for XI?
Regards
Sara
Message was edited by:
Sara D

Hi,
>>>>>1. Is it necessary to keep both XI and SAP Logon in the same system?
XI consists of two stacks - java and abap
so to access XI you also need sapgui
otherwise you won't be able o use XI
>>>>2. Do we have any other alternative to find out the port?
a) ask someone who installed this system
b) if you know the system number of your XI
then you can try: http://xiserver:5XX00
where XX is the system number of XI
Regards,
michal

Do we need two ports for establishing one connection to EJB from swing clie

Hi all,
I have an application which uses Java Swing client and accesses an EJB to connect to the server.
I am connecting to the EJB using iiop://server-ipaddress:port.
It is required for me to open the firewall to access the above specified ip address and port number. Even though, I am able to access the specific ip address and port number, I am not able to establish the connection.
I tried out to check the porblem and I came to know that, this aplication is trying to open another port also on the same IP address.
I am just wondering whether we need two ports for one connection.
Does anybody face this type of problem?

If you need to access on two ports, you would have to open both :)

List of ports for all the WCI services

I'm trying to figure out why collab cant talk to the CNS, and I see in the log:
"Attempting to connect to teh notification server at host=blah (udp heartbeat port=28282 ..."
aarg. where is the configuraiton for this? can't find it anywhere.
Has anyone created a complete list of source - destination ports for all the new components?
I"m going to start writing them down here:
http://wiki.oracle.com/page/Webcenter+Interaction+Deployment

Hi Joel,
I have had a similar problem before but I am not sure if it is related to this, if you take a look inside the PTHOME/settings/configuration.xml file you will find some extra parameters which are not listed in the configuration manager for collab.
I suggest trying some of these settings to see if they coincide with your issue. The problem I had before was when a port that was not even listed in the config manager was blocked by my firewall.

Client communication port for workgroup servers

We have SCCM 2012 R2 Single Primary Site in intranet. We have PKI with ADCS 2012. We are in process of mirating to HTTPS communication using certificates. We have few servers in workgroup and we plan to manage those servers with configuration manager by
manually installing client and specifying smsmp=sccm fqdn. for lookup management point.
Can we change client communication port for these servers?
For successful client communication do we need to open any ports except 443 in firewall?
What all ports needed to be open in this scenario?

Hi,
You configure the Communications port for the MP in the site so they must use the same ports, you can configure alternate ports so if it cannot communicate on port 443 it tries the next port.
http://technet.microsoft.com/en-us/library/gg712276.aspx
443 is sufficient, the client will also try to communicate on port 10123 for Client Notification,
http://www.google.se/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCsQFjAA&url=http%3A%2F%2Fblogs.technet.com%2Fb%2Fconfigmgrteam%2Farchive%2F2012%2F09%2F27%2Ffast-channel-for-system-management.aspx&ei=1dAhU7qqOIL8ygPb1IHQAQ&usg=AFQjCNF4_G2sZBMbDDtJa95LBx7EYYBrRw
But it should fallback to 443 if not available as well.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Alternative Ports for Firewall

Similar Messages

Maybe you are looking for