Alternative to Axis adapter

Hi All,
I was using the Axis adapter to connect with microsoft share point site with NTLM v1.
We were continuously getting 401 unauthorized error. After trying all the things we came to know that the support for Axis is not possible and there Are compatibility issues.
Can you please tell me what all other options are there to connect with sharepoint WSDL having NTLM v1 authorization.
Please let me know your comments.
Regards,
Rahul Kulkarni

HI,
Go with Java Proxy or WebService.
If it is a Java Proxy, in the proxy you can call Java Mail APIs so that , you can acheive the same.
Similarly you can achieve the same thru Webservice.
Hope this helps,
Regards,
Moorthy

Similar Messages

PI 7.11 Receiver SOAP (Axis) Adapter with MTOM (Attachments)

Hello,
Iu2019m trying to configure the Receiver SOAP (Axis) adapter for sending SOAP attachments via MTOM to a third-party webservice, but I'm not getting that PI transform the binary encode64 data in an payload element into a MTOM attachment (xop:include).
The configuration looks like this:
Transport Protocol: HTTP (Axis)
SOAP Version: 1.2
Encapsulation Format: MTOM
Keep Attchments: enabled
Payload Extraction: SOAP Body Child
First of all, could you confirm if this is supported?
Or Axis only supports MTOM for the transport protocol 'File (Axis)' like it seems refered in [Configuring the Receiver Axis SOAP Adapter|http://help.sap.com/saphelp_nwpi711/helpdata/en/45/a3c48c87cd0039e10000000a11466f/frameset.htm]
Can you please provide me some guidance here?
Thanks in advance!
Kind Regards,
Alexandre

Hello,
I am facing the exact same issue.
I can't seem to set the cookie in the http header after following the guide.
Cookie: WSL-credential=MyOwnCookie
I managed to set the SOAPAction though.
Anyone has any ideas?

Error while passing URL Dynamically in SOAP AXIS adapter..!!

Hi ,
Idoc> XI>SOAP-AXIS
I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the RCVPRN of Idoc.
If
RCVPRN = 100 , message has to go to http://10.190.25.16:8210/file/receiver
RCVPRN = 200 , message has to go to http://10.190.25.16:8210/file/receiver2
RCVPRN = 300 , message has to go to http://10.190.25.16:8210/file/receiver3
I used the below UDF and it is working correctly and generating the URL dynamically .
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyHeader1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/SOAP", "TServerLocation");
conf.put(keyHeader1, a);
return "";
The value is coming in SOAP document as expected like below.
<sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:Record namespace="http://sap.com/xi/XI/System/SOAP" name="TServerLocation">http://10.190.25.16:8210/file/receiver3</sap:Record>
</sap:DynamicConfiguration>
I used the below Configuration modules in receiver SOAP-AXIS adapter as suggested in Note 1028961.
AF_Adapters/axis/AFAdapterBean ---> afreq
AF_Adapters/axis/HandlerBean ---> xireq
AF_Adapters/axis/HandlerBean ---> dc
AF_Adapters/axis/HandlerBean ---> remover
AF_Adapters/axis/HandlerBean ---> trp
AF_Adapters/axis/HandlerBean ---> xires
AF_Adapters/axis/AFAdapterBean ---> afres
xireq -> handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
dc ---> location.1 ---> context
dc ---> value.1 ---> transport.url
remover ---> handler.type ---> java:com.sap.aii.axis.soap.HeaderRemovalHandler
remover ---> namespace ---> http://sap.com/xi/XI/Message/30
trp ---> handler.type ---> java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp ---> module.pivot ---> true
xires ---> handler.type ---> java:com.sap.aii.axis.xi.XI30OutboundHandler
and I am getting the below error in SOAP-AXIS channel at the point java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender.
2009-03-02 15:23:44 Success Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
2009-03-02 15:23:45 Error Axis: error in invocation: (500)internal server error
2009-03-02 15:23:45 Error MP: Exception caught with cause (500)internal server error
2009-03-02 15:23:45 Error Exception caught by adapter framework: (500)internal server error
2009-03-02 15:23:46 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: (500)internal server error: (500)internal server error.
2009-03-02 15:23:46 Error The message status set to NDLV.
Kindly let me know if anyone has any idea what might be wrong?
Note : The given URL is correct one because I cross checked by passing them normally by giving directly in adapter and they are all working and the message is going to receiver.
Thanks
Deepthi

Hi Stefan,
>> dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
>> dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
>> dc ---> location.1 ---> context
>> dc ---> value.1 ---> transport.url
>> Try read instead of write
When I tried with this, I am getting the below error "Connection refused ".
Success Axis: entering HandlerBean
Success Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
Error Axis: error in invocation: java.net.ConnectException: Connection refused
Error MP: Exception caught with cause java.net.ConnectException: Connection refused
Error Exception caught by adapter framework: ; nested exception is: java.net.ConnectException: Connection refused
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: ; nested exception is: java.net.ConnectException: Connection refused: java.net.ConnectException: Connection refused.
Success The message status set to WAIT.
It is going successfully when I tried sending directly. Looks like Dynamic Configuration is not working for SOAP-AXIS.
Any Suggestion?
Thanks
Deepthi.

Exchange rate SAOP-AXIS adapter - SAP PO 7.4

Hi Expert,
My requirement is to fetch exchange xml file from web link : http://www.nationalbanken.dk/DNUK/rates.nsf/rates.xml . I have gone through Michael blog: http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/01/05/michals-pi-tips-exchange-rates-from-an-xml-file-on-a-web-page--rest-axis
And I have done everything same but nothing happening to sender adapter.
It is showing running but no log updated.
I am working SAP PO (Process Orchestration) 7.4 SP3.
I have gone through ......../XIAxisAdapter/MessageServlet and it show below details:
Axis Adapter Message Servlet
Component Versions
Adapter Common Library Version: 1.7.4003.20130911141725.0000, NW731EXT_08_REL (2013-09-11T18:40:12+0000)
Adapter Application Version: 1.7.4003.20130911141725.0000, NW731EXT_08_REL (2013-09-11T18:40:22+0000)
Axis Version: ???
Required Components
Apache-Axis
Error: required component missing --- looking for org.apache.axis.AxisEngine in com.sap.aii.af.axisproviderlib/axis.jar; see http://ws.apache.org/axis/
Jakarta-Commons Discovery
Error: required component missing --- looking for org.apache.commons.discovery.Resource in com.sap.aii.af.axisproviderlib/commons-discovery.jar; see http://jakarta.apache.org/commons/discovery/
Jakarta-Commons Logging
Error: required component missing --- looking for org.apache.commons.logging.Log in com.sap.aii.af.axisproviderlib/commons-logging.jar; see http://jakarta.apache.org/commons/logging/
Optional Components
Thanks in advance!
Kumar

HI Amit,
I see status as error:
Required Components
Apache-Axis
Error: required component missing --- looking for org.apache.axis.AxisEngine in com.sap.aii.af.axisproviderlib/axis.jar; see http://ws.apache.org/axis/
Jakarta-Commons Discovery
Error: required component missing --- looking for org.apache.commons.discovery.Resource in com.sap.aii.af.axisproviderlib/commons-discovery.jar; see http://jakarta.apache.org/commons/discovery/
Jakarta-Commons Logging
Error: required component missing --- looking for org.apache.commons.logging.Log in com.sap.aii.af.axisproviderlib/commons-logging.jar; see http://jakarta.apache.org/commons/logging/
Number of Missing Components: 3
Status: Error
Thanks,
Kumar

Error in Sender AXIS adapter with UsernameToken

Hello,
I'm trying to implement a web service with UsernameToken authentication (legacy >PO>ECC), after research in this forum, some blogs and notes, I've found this approach: Axis Adapter Sender Comm Channel with usernameToken .
I did all steps, but everytime I try to consume the web service, it doesn't work and I get the following error in default trace:
No application classloader can load login module class: com.sap.engine.services.security.server.jaas.DigestLoginModule. Probably application that deployed the login module is stopped and cannot be started.
My system is PO 7.4 SP5.
Do you have any idea?

Hi,
May be below links will help you
1. /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
2. Have you used method of ConnectionFactory also??
3. 804102
xi 3.0 mail adapter with pop3 user authentication problem
4. 810238
XI 3.0 Mail Adapter for POP3 may not report some errors
Thanks
Swarup

BinarySecurityToken in sender axis adapter

Hi all,
Need pointers for implementing "BinarySecurityToken" in sender axis adapter?
Any references/blogs would be of great help
Thanks in advance.

Hi Tilak,
From your reply, I am not sure if I understand what you want to do with BinarySecurityToken.
If you mean you want to send your certificate using BinarySecurityToken with the signed message, the answer to the question "Can I include the sender's certificate in the signed message using WS-Security?" in the FAQ Note is exactly what you are looking for.
>Can I include the sender's certificate in the signed message using WS-Security?
>Yes. The default setting uses the issuer-serial method and the signed message only includes the name and the serial number of the certificate. To use the direct-reference method, which includes the certificate in the message, the handler parameter signatureKeyIdentifier of com.sap.aii.adapter.axis.ra.handlers.security.WSDoAllSender must be set to DirectReference. The default value for this parameter is IssuerSerial. See the detailed description of this parameter.
More concretely, the default settting IsssuerSerial generates the x509 certificate serial information within the SecurityTokenReference element. In contrast, the setting DirectReference generates the Reference element within the SecurityTokenRefererence that points to the BinarySecurityToken element that contains your certificate.
Best regards,
Yza

Issue with Sender AXIS Adapter while XML Signing

Hi all,
We are working on a scenario, an external application pushes message to Sender AXIS Adapter in PI. However while testing XML signing we are getting below error:
<faultcode>soapenv:Server.generalException</faultcode>
<faultstring>WSDoAllReceiver: security processing failed; nested exception is:
org.apache.ws.security.WSSecurityException: The signature or decryption was invalid</faultstring>
<detail>
Could you please provide your valuable inputs on this?
Thanks,
Jaya

Hi Jaya,
Have you checked if your message is valid? Have you tested it against another server?
Which version of wss4j are you using and which PI version?
How does your module/handler configuration looks?
If the message is valid and the handler is configured correctly, you can set the trace level of org.apache to debug and see what it says.
Best regards, Yza

Problem with Dynamic Configuration in SOAP-AXIS adapter..!!!

Hi ,
Idoc> XI>SOAP-AXIS
I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the SNDPRN of Idoc.
If SNDPRN = 100 , message has to go to http://10.190.25.16:8210/file/receiver
   SNDPRN = 200 , message has to go to http://20.180.26.16:8210/file/receiver
It is working correctly when I tried for single receiver. When I' tried to use DynamicConfiguration, it is coming in SOAP document but it is not working and not passing to correct channel. According to this note 1039369, I mentioned the following modules.
AF_Adapters/axis/AFAdapterBean --->                 afreq
AF_Adapters/axis/HandlerBean      --->                  xireq
AF_Adapters/axis/HandlerBean      --->                  dc
AF_Adapters/axis/HandlerBean       --->                 remover
AF_Adapters/axis/HandlerBean       --->                 trp
AF_Adapters/axis/HandlerBean        --->                xires
AF_Adapters/axis/AFAdapterBean    --->               afres
xireq -> handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
dc    -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
dc   --->   key.1 --->      write http://sap.com/xi/XI/System/SOAP TServerLocation
dc    --->          location.1 --->         context
dc     --->         value.1      --->        transport.url
remover    ---> handler.type    --->   java:com.sap.aii.axis.soap.HeaderRemovalHandler
remover     ---> namespace    --->      http://sap.com/xi/XI/Message/30
trp         --->     handler.type   --->    java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp           ---> module.pivot --->     true
xires     --->    handler.type   --->    java:com.sap.aii.axis.xi.XI30OutboundHandler
and I am getting the below error in SOAP-AXIS channel
Error Axis:    error in invocation: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error MP:     Exception caught with cause java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error           Exception caught by adapter framework: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Kindly let me know if anyone has any idea what might be wrong?
Thanks
Deepthi

I have a similar problem. I also like to add some header fields to my message und that's way I'm trying to use the AXIS adapter. (Axis adapter FAQ question 30) Unfortunately I'm getting exactly the same error message:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Deepthi, you wrote that you have missed one jar file. Can you remember which file it was?

Receiver Axis Adapter to 3rd party webservice

Hi,
My scenario is ABAP Proxy --> PI --> 3rd party webservice using Soap Adapter with Axis protocal.
I'm getting the following error when attempting to post to the 3rd party web service:
nested exception is: java.net.SocketException: Connection timed out:could be due to invalid address
We do have to go through a proxy server to go outside the firewall. I'm not sure if this may be the issue, but I don't even see where you can set this in the AXIS adapter.
Can anyone shed some light on the topic?
Thanks and regards,
Duke

Configured as stated below, and the issue was resolved.
How can I call some service over an HTTP proxy server?
The Axis's standard and adapter's HTTPSender and CommonsHTTPSender handlers recognize the java's standard network properties (http.proxyHost, http.proxyPort, http.nonProxyHosts) for HTTP proxy setting. Please check that these System properties are correctly set at the J2EE server's System properties page. For more information on how to set Java System properties, please refer to the J2EE server's documentation (SAP Note 710146 How to change J2EE Engine JVM Settings).
Thanks and regards,
Duke
Edited by: Duke on Aug 5, 2010 5:37 PM

Issue with SOAP receiver AXIS adapter

Hi All,
We have a scenario SOAP -- > PI -- > SOAP (axis) using SOAP 1.2 version synchnrous scenario. Using Webservice navigator am trying to trigger a message to PI .
Message has reached to PI box and failing in the receiver SOAP(axis) channel as :
Delivering to channel: Receive_SOAP_BulkFeedback 18.08.2014 10:33:24 Information MP: processing local module localejbs/AF_Adapters/axis/AFAdapterBean 18.08.2014 10:33:24 Error
MP: processing local module localejbs/AF_Adapters/axis/AFAdapterBean
MP: processing local module localejbs/AF_Adapters/axis/AFAdapterBean 18.08.2014 10:33:24 Error MP: exception caught with cause javax.ejb.EJBException: ASJ.ejb.005043 (Failed in component: sap.com/com.sap.aii.axis.app, BC-XI-CON-SOP) Exception raised from invocation of public com.sap.aii.af.lib.mp.module.ModuleData com.sap.aii.adapter.axis.modules.AFAdapterBean.process(com.sap.aii.af.lib.mp.module.ModuleContext,com.sap.aii.af.lib.mp.module.ModuleData) throws com.sap.aii.af.lib.mp.module.ModuleException method on bean instance com.sap.aii.adapter.axis.modules.AFAdapterBean@6bbad627 for bean sap.com/com.sap.aii.axis.app*xml|com.sap.aii.adapter.axis.ejb.jar*xml|AFAdapterBean in application sap.com/com.sap.aii.axis.app.; nested exception is: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.af.lib.mp.module.SModule.process(com.sap.aii.af.lib.mp.module.ModuleContext, com.sap.aii.af.lib.mp.module.ModuleData) of an object loaded from field com.sap.aii.adapter.axis.modules.AFAdapterBean.core of an object
Please help and suggest.

Hi Raja,
The end system is closing the communication. Try to reset your PI ICM instance. Also check if your PI system is affected by this note 1675953 - SSL Client Authentication failed with PI SOAP Axis Adapter
Regards.

SOAP Action missing in Axis adapter

Hi,
I am not able to send data to a Web Service using Axis Adapter (SOAP 1.2) and getting an error of "SOAP Action is missing". Can see that SOAP action is missing in the SOAP message sent to Web Service. Communication channel is configured with SOAP Action.
Am on PI 7.10 SP6.
Any help is appreciated!!
Thanks
Kiran

Hello,
I tink you are using receiver SOAP Communication channel... Ask your client to provide the same... because.... your message will be processed at receiver side by using SOAP Action at receiver side...
SOAP action is mandatory for SOAP Receiver communication channels...
Thnx
Subbu

Dynamic filepath in the Axis adapter

Hi,
I have a scenario where I attatch a PDF file in a ABAP proxy as a SOAP attachment, and I need to place this file on a harddrive with the path decided from the data in the message payload. In the "normal" fileadapter I can write to the adapter specific message attributes. Is there a similar possibility with the file transport protocol with the AXIS adapter?
Kind regards
Mikkel

I have a similar problem. I also like to add some header fields to my message und that's way I'm trying to use the AXIS adapter. (Axis adapter FAQ question 30) Unfortunately I'm getting exactly the same error message:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Deepthi, you wrote that you have missed one jar file. Can you remember which file it was?

Reciver Axis adapter error

Hi,
My interface is RFC to Webservier synchronous here i am iusnig SOAP Axis adapter for NTLM authentication.
I am getting the below error in my receiver SOAP Axis adapter
Information MP: processing local module localejbs/AF_Adapters/axis/HandlerBean
12.01.2012 08:12:39.287
Error MP: exception caught with cause org.xml.sax.SAXException: Bad envelope tag: html
Thank you
Srinivas

Hi Srinivas,
Try having a look at this [OSS Note 1039369 - FAQ XI Axis Adapter|https://websmp130.sap-ag.de/sap(bD1wbCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1039369]. You will find an FAQ for Axis Adapter there. Also, see a similar thread here: Error in SOAP Sender Communication Channel.
Hope this helps,
Grzegorz

Sender SOAP Axis adapter

Hello Experts,
my scenario is to pick the data from web service and pass it to ECC side.
as i need to pick XML file from web service i used SOAP Axis adapter. configured as given in michal's blog.
the channel in running no errors in RWB, still its not picking the data.
Michal's PI tips: Exchange Rates from an XML file on a web page - REST, AXIS
your inputs on this...
regards,
chinna

Hi ,
I have confifured the same folw, it's working for me. please provide if you are getting any error.
Regards
srinivas

How to deploy AXIS adapter frame work in sap pi

Hi All ,
We are going to use Axis adapter framework in AAR PI landscape(X6* track). As we understood, this is SAP provided by default with PI but there are some more additional JARs need to be installed to enable this functionality.
Do we need downtime for this activity?
How to to deploy some standard JAR files in SAP PI
system to enable Axis adapter framework PI systems.

Hi Rainder
Could you refer the SAP Note 1039369 - FAQ XI Axis Adapter for your request. and also you can search SCN or Google about your requirement you can find some many threads
Regards
Sriram

Alternative to Axis adapter

Similar Messages

Maybe you are looking for