Alternative to nVidia WDM Drivers

My Configuration:
Hello, I am having a lot of problems with the nVidia WDM drivers (all versions) and MSI Media Center II (w.patch).
I am using Pal-B and have tried using all the Pal modes, can't use NTSC/Secam.
I have a MSI GeForce FX 5600 256MB (VTDR-256) with Remote and a ViVo connector.
The Problem:
The problem that I am having is whenever I run Media Center II, and try to record something, after some time, say 10 or 20 minutes I get a blue screen and the system reboots.
Error Messages:
The blue screen has the following information on it:
IRQ_LESS_OR_EQUAL_
After the line which says STOP*----
nv4_mini.sys
Temporary Solution:
If I switch to NTSC the programs record fine and I don't any blue screen, however since my TV system is PAL and switching to any NTSC mode gives me the small problem of 1/4 picture being cropped from the bottom.
Could someone tell me of some other program that I can use, to record my TV shows besides Media Center II or maybe a different driver that won't give me this error.
I have tried the trial version of Ulead Media Studio but the problem is that the program records and each show is of about 3-4GB in size, I need a program which records in good quality and small size as well.
I have also tried Dr.DivX but I can't seem to capture anything using that program.
Also, I have looked at other threads but have not found any help yet.
Thread #1
Thread #2
Thread #3

This might help :
http://www.microsoft.com/downloads/details.aspx?FamilyID=8dfd1b6d-e177-4a0e-91d0-b4310675b02b&DisplayLang=en

Similar Messages

81.95 drivers Vs WDM drivers

Hi there,
My new 6600GT works better than I supposed, and (to my surprise) temps are pretty low. Concerning this point, my case temps are globally better than before. I guess that this is due to the fact that 6600Gt is significantly shorter than my old 5700U, i.e. air flow has improved.
But there's a li'l problem: I cannot install the WDM drivers (the card is a VIVO one). I currently run the 81.85 nvidia drivers and tried to install the latest WDM drivers, with disgusting results. Windows hang at startup and then the device manager just tells me that the wdm device doesn't work (or something like that). It's a problem I already found discussed in other posts, here and in other forums, but without convincing solutions.
Well, apparently, the new nvidia drivers (81.95) are supposed to resolve conflict problems with the WDM drivers. I still didn't try them, but was wondering whether someone has some experience with this issue.
Thanks & bye

Hi jherring69,
I'm glad they fixed the problem! I'll install the new drivers. Thanks for your answer!
Have a nice day
Quote from: jherring69 on 25-November-05, 13:10:49
I had the same problem with the 80 series drivers. The vivo drivers would uninstall after every reboot. The new 81.95 Drivers fix this problem. VIVO is now working right again.
Good luck.

What is nVidia WDM captura driver???

I install the drivers for wdm video capture that I found in the msi web page for my msi fx 5200 TDR128 but I don't now what this driver is for. Also I get a code 10 in the device manager tha says the nVidia WDM video capture(universall) cannot start. it has a yellow mark on it. Does anybody how do make it work? What are this drivers for?
Thanks
PhanosP

WDM video capture are for... capturing video :D that is if your card has a video input. If you have video input on your card and you get a yellow "!", welcome to the club !!!
There is a bug (looks like it !) where the WDM drivers fails to load correctly with the main nVidia video drivers.
You can make it run properly by checking this thread . It worked for me. The only problem is that this is an old version driver that does not have all the latest features and I think it will not work for your FX.
You should not have problem with your new FX5600. Probably having error because your card does not have the video input.

Nvidia 64bit drivers and Windows XP64Bit

Lo ppl , im a newbie here.
Here we go :
Fresh install of Windows XP64 on my new Seagate Baracuda ,
Pressed F6 durring installation for Sata/Raid drivers - windows reported corrupt files.
Windows then carried on installing fine, rebooted and system loaded fine.
K - time for NVIDIA drivers (latest 64bit drivers from nvidia)
Installed system drivers first including IDE drivers. - Reboot
System loads till Windows XP64 screen, scrolly finishes, and then screen goes blank and h/drive light flashes but system does'nt finalize boot.
Tried Roll back on all Nvidia drivers - no help
2) - Reformat h/drive and whole proccess again. except instead of installing all Nvidia drivers, I just tried the Network drivers - same problem as b'fore
Rollback also failed
3) Reformat h/drive and whole proccess again. except instead of installing nvidia system files I installed nvidia display drivers for my Geforce. Same problem windows failed to post. And rollback also fails to repair problem.
tried system recover and that also did'nt work
I'm as hell.
Any help plz

Sorted my problem out - After reading 3hours of posts on this forum I came to the conclusion that keyboards and psu's are real NB on this mobo.
My 300W psu could this be the problem I asked myself
Well went out and got a 500W KME Gold unit not the best but not the worst
Reformated my HD and did win64 reinstallation
Installed new PSU unit
Booted up win64 and installed NVIDIA 64Bit driver manually from Device Driver Menu
Rebooted and wolla all works fine.
So I'm not 100% sure it was the PSU unit, I might temp a reformat again to verify if it was psu or way I installed drivers.
Now next ?
Why does'nt any of the utils on MSI setup cd run on win64 or are there 64bit versions available , or alternative progs that I can use on win64 ?

Loading wdm drivers blue screen

I am trying to load the wdm drivers to use with my 4600ti. But everytime it loads the driver for the tvtuner device i get a blue screen, it reports back an address error on the file nvtunep.sys.(it loads the drivers for all the other capture devices) I have tried the latest wdm drivers from nvidia and also the drivers that came on the disk.
I have had this working before so im not sure why its not working.
Thanks in advance
Mrlargeit

Hi,
After a lot of tries I have tried Windows 8.1. This time when I install the drivers the graphics card is shown in device manager but I cannot open Catalyst manager. I got the message:
"catalyst control center cannot be started there are currently no settings that can be configured"
This is what I tried:
1.Downloaded the drivers from lenovo website for chipset, Intel HD graphics and AMD graphics
2.Swhitched off the internet so that Windows doesnt download drivers for the Intel HD graphics
3.Uninstalled Intel and AMD drivers
4. Installed the Intel driver
5. Installed the AMD driver
This doesnt seem to work. Some time after I install the AMD driver, the screen goes black and even if I restart the PC. Only thing I can do is to open in safe mode and uninstall the AMD drivers. I dont know if it does matter but I havent activated the Windows yet (I dont want to by them unless I know that my laptop is fully functional).
This is what I get in hardware ids in device manager for the video controller.
PCI\VEN_1002&DEV_6600&SUBSYS_380117AA&REV_00
PCI\VEN_1002&DEV_6600&SUBSYS_380117AA
PCI\VEN_1002&DEV_6600&CC_038000
PCI\VEN_1002&DEV_6600&CC_0380

Nvidia WDM Driver 1.23

Drivers: Nvidia WDM Driver 1.23
=>Posted by: Newsfactory.
=>Thursday, February 27 @ 23:31:12 CET
A new Nvidia WDM driver 1.23 has been posted . This file is required for VIVO and Personal Cinema functionality with Nvidia display adapters. Wanna grab it?
Download Nvidia WDM 1.23 driver
http://driver.gainward.com.tw/VGA/Driver/Nvidia/WDM/v1.23/WDM1.23.zip

I had to reinstall windows several times today, and I was looking for the WDM drivers, and I thought for sure that there just had to have been an updated one.
Thank you

Geforce 6600 GT VIVO - Problem of network after WDM drivers installation

Dear All,
I have a big problem and I am not able to fix it. I have a MSI Geforce 6600 GT VIVO with the last nvidia drivers.
I have tried to install the WDM drivers (the one on the CD-ROM or the last issued on the nvidia site) and any
time I did it a new network connection was created (Microsoft TV/Video Connection).
I cannot remove it and it was still there after several reboots. The problem is because of the new network
connection I'am not able to have internet connection (high-band modem using ethernet ; freebox).
Any idea to help me. I didn't find any solution on newsgroups.
André
My config : Windows 2000 (updated) - Asus 7N8X-X (last drivers) - Athlon XP Barton 2600 - MSI 6600 GT VIVO
Direct X 9.0c - 512 Mo - Connection to internet by freebox (Speed 20 Mo) ethernet

I have a problem that seems virtually the same as Andre31bis's. I recently installed an MSI NX 6600GT VTD128 on my system (AMD Athlon XP 3200+, MSI K7N2 Delta-ILSR--BIOS version 7.7, NForce chipset drivers version 4.27--with onboard NVidia LAN chip, 1 GB Corsair TWINX1024-3200C2 DDRAM, Turtle Beach Santa Cruz sound card, Windows 2000 SP4 with all updates, and DSL Internet service). I have the latest NVidia drivers (including video capture) for the card and it works perfectly except that the video capture drivers create a conflict with the network connections. Upon initial installation of the video capture drivers, the VIVO functions work quite well, but when the system is rebooted, the software loads extremely slowly, the network connections do not load, preventing network access, as well as the loading of Norton Antivirus's autoprotect, and ZoneAlarm takes many minutes to load. On such subsequent reboots, looking in the adapters and bindings tab of the advanced settings of network connections shows that none of the network adapters have loaded. I tried the advice given to Andre31bis by user_name, but that had no apparent effect.
Clearly, however, the network interface the video capture drivers try to establish conflicts with the LAN interface and prevents either from loading. I checked the DMA and IRQ settings while the drivers were installed and functioning and no conflicts were indicated.
Does anyone have any other ideas on how to solve this issue?
Thank you.

[GeForce 6] NX6600GT WDM drivers witch ones

what WDM driver work the best with A NX6600GT with
the 76.45 drivers and were dose MSI hide there WDM drivers for the Geforce 6 cards
or just use the FX seares card driver

zed201,
Use the latest nVidia ForceWare Drivers

Not Able To Install Nvidia Graphics Drivers

Hello all!
This past week I just finished putting my new system together with a K8N Diamond Plus. Only major problem right now is i am not able to install Nvidia's drivers. Below are my components...
XP 64-Bit Edition
MSI K8N Diamond Plus
AMD Athlon 64 X2 3800+
BFG 7900 GTX 512MB
1 Gig Coirsar Ram
2 Wester digital HD in Raid 0
When I try and install the graphics drivers i get the message " The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."
I used the chip set drivers listed here: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=710&kind=1
Also I have tried the ones from NVIDIA's site: http://www.nvidia.com/object/nforce_nf4_winxp64_x16_6.83
The graphics drivers i used are from NVIDIA's site: http://www.nvidia.com/object/winxp64_81.98.html
BFG Tech support guy had me look under display adapters in device manager. It only has Standard VGA Graphics Adapter listed. He said I did not have my chip set drivers installed (though i have), or the motherboard was not recognizing it. Also he said they do not support XP-64 and would not offer me any more support so long as i run it.
I just can not believe that XP 64, 7900 GTX, and this great K8N Diamond Plus can not get along.
Any advice anyone has for getting my Diamond Plus and my graphics card to jive together would be greatly appricated.
Thankyou all!!

Thankyou guys for the responses. I was able to find drivers that worked with my card here..
http://www.laptopvideo2go.com/index.php?drivers&series=80&os=2&type=1&dir=1
Now my only current issue left is that I have no sound. It is enabled in the BIOS, installed the 64-bit drivers from MSI site, tired installing drivers off disk. Any suggestion?

AWE64 WDM drivers for Windows 98

Hi!
I've put together a music computer running Windows 98SE on a PC with the excellent AWE64 Gold sound card (yes, i know there are newer cards). In order to install the ASIO4ALL drivers for reduced latency, the sound card needs WDM drivers. However, browsing the Creative support download page, i can find no trace of them. The only thing i can find are the VxD drivers. I'm quite sure that there were WDM drivers for this card at one time but now they have seemingly vanished without a trace. Maybe i'm just missing something obvious here.
Anyone know where to locate these drivers?
Thanks.

Have you searched Google for them? Or try using some P2P program like DC++ and search for the drivers?

Using Linux with Nvidia binary drivers, how do I enable WebGL in Firefox 8?

I've heard it is possible to use WebGL in firefox 8 for linux if using Nvidia binary drivers, but I haven't found a succinct recipe. can someone point me to a working recipe?
thanks!

You have a WebGL renderer listed on the Help > Troubleshooting Information page:
WebGL Renderer: NVIDIA Corporation -- GeForce 9800 GT/PCI/SSE2/3DNOW! -- 3.3.0 NVIDIA 280.13
You can check the values of the webgl prefs on the about:config page via the location bar.
*http://kb.mozillazine.org/about:config

WinProducer2 start error, won't run with nVidia Capture drivers

I'm not having a good experience with the bundled WinProducer2 that came with my MX440VT8x-128.
If I have either of the versions of the nVidia capture-drivers that came on the card's CD (that's v. 1.16 or 1.18) installed, or the 1.22 version from nVidia's website (as of 2-20-03), and then try to start WinProducer, I get the same start-error every time:
"WinProducer.exe has generated errors and will be closed by Windows....need to restart program...an error log is being generated."
If I look at the Dr. Watson log, it says WinProducer 2 generated "Exception Violation c00005."
If I uninstall the nVidia capture-drivers, WinProducer2 opens right up just fine, but, of course, with no capture capability.
I downloaded and tried (after uninstalling v.2) WinProducer3 from InterVideo's website yesterday (2/20/03), with the exact same results! ???
Anybody else having this problem?
This is under Win2k, w/SP2, then added SP3, with no improvement.
Stenn

After I made the original post, I tried a lot more things that didn't help:
I booted in safe mode and tried it but PSP gave an error message that it wouldn't run with the screen resolution that low (800x600); so it did try to run. So I booted normally and set the screen rez to 800x600 manually, then tried to run PSP and got the same error message.
I did a clean boot with all start-up programs and all services disabled; PSP still wouldn't run.
I disabled my anti-virus and PSP still wouldn't run.
Disabled my video card in the device manager and booted with my on-board video; PSP still wouldn't run.
There's never an error message as long as the screen rez is high enough; when I try to run it, it looks like it's starting to run but nothing ever happens.

After effects instantly crashes while using opengl with nvidias new drivers 178.24

Since I installed nvidias new drivers 178.24, after effects instantly crashes while using opengl. Anyone else experienced this?
I have Geforce 8600 GT.
As a minor note, I had major problems with the new quicktime 7.5.5 update, both After effects and Premiere got problems with interpreting footage and frames here and there got the "missing frame" look. I also got more problems so I uninstalled it instantly. Is there a major problem with the update or a major problem with me?
Thanks
/ Olle

I use Vista (in retroperspective this was probably a mistake, but the company wanted to test the capabilities with Vista when we bought the computer a year ago). And specs are:
*Graphics: Asus Extreme GeForce 8600GT SILENT 512MB DDR3 TV-out HDTV DUAL DVI RETAIL PCI Express
*HD: Samsung HD501LJ 500GB 7200rpm 16MB SATA2
*Audio: Creative Sound Blaster X-Fi Xtreme Audio Retail
*Mem: Corsair QUAD2X4096-6400C5DHX QuadDHX 4x1024MB (tot. 4096MB) Kit DDR2 XMS2-6400 800MHz
*Motherboard: Asus P5K iP35 4DDR2-DIMM 3PCI 3PCIe SATA Raid Audio GB-LAN Firewire Socket775 ATX
*Processor: Intel Core 2 EXTREME QUAD QX6850 3.0GHz 8MB FSB1333 Boxed (with cpu-cooler!) Socket 775
*Power: Sirtec/Chieftec CFT-750-14C 750W 140mm fan ATX2.0 20/24-pin 4/8-pin 12V Modular
Sorry not to give more info on the Quicktime problem, I don't remember exactly what more problems there where as we have had extremely much to do these last couple of weeks and I just freaked out and uninstalled it as soon as the problems emerged. I do remember the frame issue however, it was very clear, i imported an image sequence in premiere and everything worked fine, then i updated and frames were suddenly dropped, then i uninstalled and installed 7.5 again and it worked just fine. I also tried to flush the cache, restart and generally search for the source of the problem for a couple of hours.
/ Olle

Purchased a early 2008 Mac Pro in 2010. Yesterday I updated my mac to System 10.9 and now I have a dialogue box in system preferences saying I need to update the NVIDIA CUDA drivers but the servers are unavailable. I download a driver from the site but th

Purchased a early 2008 Mac Pro in 2010. Yesterday I updated my mac to System 10.9 and now I have a dialogue box in system preferences saying I need to update the NVIDIA CUDA drivers but the servers are unavailable. I download a driver from the site but the Mac would not open it. This system has an ATI Radeon HD 2600 XT 256 MB graphics card. What do I need to do. Do I need a new Card?
David Rosenblatt
<Email Edited By Host>

Vista Ultimate 64-bit recognizes 8 cores. 32-bit recognizes one physical cpu.
I've had very little trouble in two years. And now I do like Windows 7 but also eager for the RC.
I've been using the latest Nvidia. There is a method to the madness of how to uninstall/delete and install graphics drivers, or madness in the method. The W7 drivers are easier.
Nope. Something else. More sensitive to disk errors. You aren't running a program to boost fans. Something.
And some AV software is more prone to causing trouble. But all you need is a good AV/malware program, and even Norton AV 2009 is acceptable, or Avast or one of the others.
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0

Can not install NVIDIA Display Drivers

I have a T61 (7664-17U) with XP SP2.
For sometime now I've had problems with the NVIDIA display drivers. Occasionally my NVIDIA drivers disappear and are replaced by VGA . I notice this when I can't Standby or Hibernate my system, those options are grayed out. Also, interacting with the display is difficult..
I've tried several times to update my 12/2007 drivers to the latest ones from the Lenovo site. The latest drivers appear to be installing (InstallShield?) but I get a message after a few minutes that "The system has not been modified. To install the program at a later time, run the installation again." No other information.
I found out early that if I install the old drivers everything was OK, until yesterday. Yesterday when I tried to install the old drivers I got
" Error Code: -5004 : 0x80070005 rror InformationSetupDLL\SetupDLL.cpp (1968 PAPP:NVIDIA Display Drivers PVENDOR:NVIDIA Corporation (http://www.nvidia.com/) PGUID:EFB7D050-CAD2-11D4-B34D-00105A1C23DD $9.1.0.429
@Windows XP Service Pack 2 (2600) IE 6.0.2900.2180."
I tried several iterations of installing the drivers including downloading the latest ThinkVantage installer.
How can I solve this problem? Should I try downloading the latest drivers directly from NVIDIA website?
I'm very appreciate of any help! Thanks, Tilly

"Should I try downloading the latest drivers directly from NVIDIA website?"
You can't install drivers obtained from the NVidia website. You'll get a "No compatible hardware found" message.
You're supposed to only install video drivers obtained from Lenovo.
If your T61 is still under warranty, a request for service is in order.
Centex

Alternative to nVidia WDM Drivers

Similar Messages

Maybe you are looking for