Alternative to RealPlayer on E71x

Hi,
The RealPlayer installed on my E71x other than the fact that movies get stuck all the time, doesn't have fast forward, which becomes really annoying as I stopped watching somthing and then want to continue from the middle or fast forward the piece I saw.
Is there any alternative video player that will work on E71x?

gil100 wrote:
Hi,
The RealPlayer installed on my E71x other than the fact that movies get stuck all the time, doesn't have fast forward, which becomes really annoying as I stopped watching somthing and then want to continue from the middle or fast forward the piece I saw.
Is there any alternative video player that will work on E71x?
Navigation key-> up
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

Need an alternative to RealPlayer ASAP

I have a deep-seated, undying hatred for RealPlayer, and do not want their adware-infested crap on my machine. That said, unfortunately, the teacher credentialing program I just started uses it as an integral part of most the courses I'll be taking. I've been looking around online to little avail for something that'll work around this, so I thought I'd drop a note in here. Has anyone found a decent (****, I'll even settle for subpar) alternative?

加持 wrote:
Has anyone found a decent (****, I'll even settle for subpar) alternative?
Well if you're feeling daring... create a virtual Linux machine (through Parallels or VMWare) and apply the restricted-extras package (restricted = not open source) and play through one of the OS's included players.
I have an Ubuntu Hardy installation at the moment, which plays .rm files through its Totem player.
Other than that, not much else you can do. RealMedia is a proprietary codec.
Steve

Is there an alternative to realplayer for playing smile files

I am having problems with real player and wondered if there is another application.
Lyn1428

Not really. You can downgrade back to Snow Leopard, but only if you have a model that supports Snow Leopard.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

My RealPlayer is not downloading videos anymore on Firefox 28. My Realplayer plug in is no longer seen in my extensions section either. How can I fix this ?

My RealPlayer download feature (the button that appears on top of a video to allow a download) was working fine until a few days ago, when I installed the latest Flash player update (12 something). Now, my Real Player does not work, at all. In fact, when I looked for the Real Player plug in in my 'Extensions' folder, it was not there (though it is listed in my 'Plug In' section). How can I get my Real Player download to work again, as well as have it return to my 'Extensions' section ?
Thanks,
Gary

Thank you for your question, and apologies for the delay. I have found some more information that may help answer your question. Below is the current knowledge base article that has what we know about the RealPlayer extension and add on:
*[[Fix problems with RealPlayer add-ons]]
*[https://support.mozilla.org/en-US/kb/re-enable-add-ons-disabled-when-updating How to re-enable the plugins disabled during and update]
[http://www.real.com/resources/download-one-video/ Alternative download videos]
Please post back letting us know if this helps.

Realplayer Files Won't Open- Require Constant Authorization

Windows XP Desktop
I have recently transferred some songs from the media player Realplayer. However, while they work independent from the computer when connected they will not play at all. iTunes just keeps popping up saying that the computer needs to be authorized to play these songs but it never plays them. Help!
No color display; No Photos or Video; Spin Wheel Windows XP Desktop
Windows XP Desktop

"I'd still love to find the Mac answer though"
Well David unfortunately this you wont find, simply because Apple does not support that media format.
So you will have to use applications like "HandBreak" to convert files to Apple preferred formats, so you can use only Apple apps like iTunes and Quick Time....
Or if you like to use those formats then you will have to use alternative apps for Mac like DivX or VLC Players to play them.
I hope this helps your dilemma
Goran

How can I replace Realplayer?

I am trying to edit a youtube video and it requires Realplayer SP. I tried to download it but it is not from an authorized developer so it I can't open it. Unfortunately, I chose "Replace" my existing RealPlayer so it seems it has wiped it out. I went to the edit menu and clicked "Undo copy Realplayer SP" so it took the new application out of my applications folder but the old one is nowhere to be found.

Control-click it and choose Open. Alternatively, open the Security & Privacy pane of System Preferences, click on the General tab, unlock the pane, and set it to allow applications from anywhere.
(124788)

Interesting RealPlayer crash + sleep failure -- what happened?

I see plenty of computer crashes and usually it's just reset, and move on. But this one got me curious, and I wonder what other forums users think. Here is what I observed.
I was listening to an NPR story on RealPlayer. I put it on pause to watch a TV show. I dimmed the screen to black. The powerbook was plugged in.
The powerbook was set to sleep after 1 hour. After the TV show, I went to go work on my Powerbook again, and it was a little over an hour. The screen was completely blank. (You know how even with the backlight off, you can still see the image? That was not visible.) I pushed F2 (increase brightness), nothing happened. The front status indicator shows the powerbook is not asleep.
I push a bunch of keys and generally try to wake up the PB. Nothing. I go to another computer and ssh in. That works. I check the process list. RealPlayer has eaten a hours of CPU time, and the system reports it has been active since "31Dec69", a.k.a. the beginning of time.
I try to kill realplayer with signal 9. No change. I keep trying, and read the man page for kill in case the signals are different on the mac (v. linux) and I just don't know it. They aren't. In the process list reaplayer is now showing up as "(RealPlayer)" but won't go away.
Feeling the computer, I can tell it's very hot, like it has been overheating. Particularly near the microphone it's extremely hot, but the fans are barely on.
A second later, as I'm typing in a command on the shell, the connection dies. The system is no longer responsive at all, I reset it. As it reboots, the fans come on strongly (not max, but more than a normal boot).
Ok, now here's my guess at an explanation:
When the system tried to sleep after 1 hr, RealPlayer stopped it, and a race condition started. That race condition kept the system alive, the processor at 100%, and because of some weirdness with the sleep process, it kept the fans from coming on.
The system heated up (while I was watching House MD) and the fans never kicked in. I got back to the PB just in time to start working with it before the processor went critical and shut itself down to prevent melting. While I was in the ssh session, a hardware sensor tripped, stopped the processor, and that was that.
Support? Alternative explanations? What was this?

https://bugs.archlinux.org/task/40304

Realplayer for 6300.....help me

please if any one can help me to download the realplayer
to my mobile.
regards

Realplayer is not available for series 40 phones like the 6300. Only S60 smartphones have realplayer.
You may be able to find an alternative media player at www.getjar.com

E75 vs. E71x

I need some help in deciding wich one to get, the e75 or the e71x.
I could use some help.
Tnx.
Jairo Mejía

Raptorjmc:
I personally bought got my E75 just two days ago and I really like it. I must say I was very hesitant (picky by nature) and did a ton of research before spending my $300. I never really considered the E71 because I'm not a big fan of the faceplate QWERTY set up like the E71 or Blackberries have. On those grounds, it was aesthetics and convenience that won me over. The other phone I strongly considered was the Nokia 5800 XpressMusic. The E75 gives me a great deal of flexibility when typing and I like both, the standard ABC and slide QWERTY keypads. I'm also am a person that doesn't like to charge my phone (matter of lifestyle), and I really took a plunge deciding on the E75 because it was touted as not having great "business-like" battery life, but then again, I'm not hardcore power user hooked up into 5 email accounts while syncing them every 10 minutes, WiFi/Bluetooth on, etc. My main use for the phone is WiFi (Skype/Nimbuzz, Email, etc), Music (it has the 3.5mm jack so many others don't), and Document viewing with Realplayer videos (preloaded, not streaming). Today is actually the day that I started to test the E75 battery according to my "normal" days (because the first day I was playing with it non-stop, testing out all the features and setting everything up, etc). I'll update it tomorrow...
http://www.symbian-guru.com/welcome/2009/04/nokia-e75-vs-e71-hardware.html
In my research I came across this link which is actually your subject heading. I think it may help. I personally didn't base my choice on the article, as there are many other, more substantial and qualitative reviews of the phones out there than this, it gave a good breakdown of the features.

Using RealPlayer (dialup) - How can I give N/W preference to it's buffer?

4-25-06
Is there a "safe" way to configure the machine so that "1st preference"
is given to keeping the RealPlayer buffer full (listening to radio stream)?
I use 56Kb dialup and don't mind slowing down e.g. Safari etc but don't
want the radio stream to be interrupted.
Have UDP ports 7070-7071 opened in Sys Pref's and tell RealPlayer to
use them. I also buffer 500 seconds in RealPlayer. Still, it's buffer gets
empty (stream is at 20+ Kbps and modem is at about 45+ Kbps).
Maybe there is a better forum to post this at discussions?
eMac, 10.3.9, RealPlayer 10 for Mac OS X, 10.0.0 (v331)
eMac G4 (build 7W98) 125 GHz, 256 MB, 37 GB Mac OS X (10.3.9) dialup 56K modem

just cleaning up my junk

How can I assign points to the alternatives in a question?

Hi! I am building my first quiz in Captivate and I have this little problem I haven´t been able to solve. I want a make a test that meassures how stress you are att work. It looks like a survey, I´ll have about 20 or more questions with the same type of alternatives, no right or wrong alternatives, but you choose the one you agree the most with. The thing is that i want to give a value point to each alternative and be able to have a score at the end. See the example.
How often do you feel stressed att work?
1. never : 0 points
2. one a week: 2 points
3. three times a week: 3 points
4. Everyday: 4 points
Att the end, the score you get tells you how stressed you are, but instead of showing a result in term of points, you´ll get a text giving you feedback and recomendations for better health. Can I do that in Captivate? I haven´t been able to find a way to do that yet...
Thanks for any help you can give me!

Hello,
Tried putting something together that could be possible, concentrated on the workflow. There will be some repetitive tasks to be done however, problem is that a click box cannot stay for a whole project, which means that a click box gets its proper ID on each slide. Will try to explain, it is up to you to judge if this is acceptable, or if you'd go better with a Flash app.
Created (for the moment, perhaps you'll need more if p.e. for Q1-Q10 you need a separate result for A and for B, result for Q11-Q20...) two user variables:
v_AClick to store the number of clicks on A-option
v_BClick to store the number of clicks on B-option
The results can then be used later on for a condition (did not write it yet).
Created a first slide with these objects:
dummy Text Caption 'Option A' (will be replaced later on with question text)
click box covering up this Text Caption, named it (ID) ClickA1 (this is the tedious part, has to be done for each CB; ClickA2, ClickA3...)
dummy Text Caption 'Option B' (will be replaced later on with question text)
click box covering up this Text Caption, named it (ID) ClickB1 (this is the tedious part, has to be done for each CB; ClickB2, ClickB3...)
imported a 'sign' to be showed after the user clicked into the Library, and put an instance to the right of each Text Caption, those were labeled VinkA and VinkB. Very important: set those instances to 'Show for the entire project', which avoids to have them duplicated to each slide, we will hide and show them as necessary.
button 'Next' which on Succes jumps to next slide.
The blue Text Caption was for me, to check if the actions were functioning, shouldn't be there in the end file.
I created a first Advanced action, labeled it HideVink (sorry for the Dutch, Vink = the green symbol), to be triggered on entering the slide:
Hide VinkA
Hide VinkB
Second/third action, labeled A_Action1/B_Action1 to be triggered by clicking on the ClickA1/ClickB2 with these actions:
increment v_AClick/v_BClick with 1
hide the other clickbox, thus ClickB1/ClickA1 to avoid that the user could click on both options
show AVink/BVink
Here is an example, action A_Action1
Those two actions have to be duplicated for each Question slide (A_Action2, B_Action2,....). What has to be changed in the duplicates is only the number of the Click Box, that is why I labeled them to make the process easier.
Now I duplicated the slide as many times as necessary. The actions for button and entering slide are OK, but the actions for the click boxes have to be adapted (tedious).
Why did I use 'dummy' Text Captions: I should export (File menu) the Text Captions to a Word-document, change the dummy texts (left column) to the real captions (much easier in one doc) and re-import them into the CP-file.
That was my homework, as promised. Hope it helps, even if you choose to go the Flash-way after all.
Lilybiri

Alternative Periods in Report Painter

I'm trying to create a report painter report for labour efficiency, it compares actual labour confirmations to a statistical key figure for payroll hours.
I have the basic elements, but my problem is this. We currently run our accounts on a calendar month basis, so we have 12 periods in FI. This report is required on a weekly basis for each weeks payroll. Is it possibly to report totals for a given week, when that is not your accounting period?
I can't see any obvious characterisics that will give me a weekly total of each figure, but I'm wondering if it os possible to define alternative periods (e.g. 52/53 week years ending each sunday for a period, and bring that in as a row characteristic).
Has anybody managed to achieve anything like this, and if so how?
Postings can occur anytime in the week, so I don't think posting date is an option, but may be if you can specify ranges that can be logically extrapelated in the report (i.e. Mon-Sun).
Thanks for any advice on this
Graham

Has anybody got any comments or advice on this?
Graham

A semiautomatic alternative to /etc/fstab

This is probably highly redundant... the chances are, someone will likely say "XYZ does that for you and you can configure it in 5 minutes", but here goes anyways.
I wanted a simple way to mount the disks in my computer to the same location regardless of where they were in the system (thus via UUID) but what I *didn't* want was to have to copy/type the UUID myself. The following possibly shaky bash script is the result.
First, however, a (very real-world) demonstration of its functionality!
/disks/ + ./domount
Using scriptdir "/disks/.mountscripts".
Running mount... [ok]
[Disk ST3250620A_5QE4M336]
group0-root -> /disks/250gb: [ok]
38067a33-0556-4cab-a5c5-c96b313bd174 -> /disks/250gb/boot: [ok]
21D4-2E62 -> /disks/250gb/data: [ok]
group0-home -> /disks/250gb/home:
== mount error ==
mount: wrong fs type, bad option, bad superblock on /dev/mapper/group0-home,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
=================
[R]etry/Skip [P]artition/Skip [D]isk/[Q]uit? q
/disks/ + fsck.jfs /dev/mapper/group0-home
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 11/10/2011 20:28:10
Using default parameter: -p
The current device is: /dev/mapper/group0-home
Block size in bytes: 4096
Filesystem size in blocks: 52099072
**Phase 0 - Replay Journal Log
Filesystem is clean.
/disks/ + ./domount
Using scriptdir "/disks/.mountscripts".
Running mount... [ok]
[Disk ST3250620A_5QE4M336]
group0-root -> /disks/250gb: (already mounted)
38067a33-0556-4cab-a5c5-c96b313bd174 -> /disks/250gb/boot: (already mounted)
21D4-2E62 -> /disks/250gb/data: (already mounted)
group0-home -> /disks/250gb/home: [ok]
group0-var -> /disks/250gb/var: [ok]
partition1.vfat -> /disks/250gb/home/backup/80gb/mnt/partition1.vfat: [ok]
partition2.vfat -> /disks/250gb/home/backup/80gb/mnt/partition2.vfat: [ok]
partition3.vfat -> /disks/250gb/home/backup/80gb/mnt/partition3.vfat: [ok]
partition4.ext3 -> /disks/250gb/home/backup/80gb/mnt/partition4.ext3: [ok]
data2 -> /disks/250gb/home/backup/32gb-2/mnt/data2: [ok]
[Disk ST340014A_5MQ4HB90]
0854-08DE -> /disks/20gb-1/data-1: [ok]
4846-D7E2 -> /disks/20gb-1/data-2: [ok]
3070DB1E70DAE99C -> /disks/20gb-1/winnt: [ok]
38BB-158D -> /disks/20gb-1/pool: [ok]
[Disk WDC_WD800BB-22J_WD-WCAM9H677098]
e336c404-fca8-4f2b-9c75-81c22f339741 -> /disks/80gb: [ok]
4738-E723 -> /disks/80gb/vfat: [ok]
a827cfa1-08cf-4a24-a989-aae94ea0801b -> /disks/80gb/boot: [ok]
7bb5df89-3a90-4c92-8aa7-a94271806087 -> /disks/80gb/var: [ok]
09b652b7-4f5e-4895-8464-6f972a44fdd6 -> /disks/80gb/home: [ok]
a2534aa6-b70f-442d-805e-365ee626d4be -> /disks/80gb/tmpspace: [ok]
4871-993D -> /disks/80gb/tmpspace2: [ok]
386a2a83-22e2-425c-bd48-cb0a1fad8a87 -> /disks/80gb/pool: [ok]
/disks/ +
Here's the script! (I can pastebin it if neccessary)
#!/bin/bash
# ohai from i336 :P <[email protected]>
# Oct-Nov 2011
# Public domain, no warranty. Be sure to use the "t" flag on the first run!
# This program has two modes: scan mode and run mode.
# Configuration
# =============
# You first need to create/go into the directory you want to mount your disks
# in, such as /mnt (I use /disks), and create the subdirectory ".mountscripts", or
# alternatively "programname-mountscripts" (the second directory bearing the
# name of the program/symlink, a simple mechanism to implement some flexibility).
# You can substitute any created symlinks whereever "./domount" is mentioned.
# The existance of this directory indicate that this is the work directory.
# (For added flexibility, the program will look for the second directory, the
# one bearing its name, first, then fall back on ".mountscripts" if this is not
# found.)
# Scan Mode
# =========
# After creating this directory for the first time you will want to run
# "./domount s" to generate the mountscripts into the mountscript directory
# (which is selected as specified above).
# Run Mode
# ========
# At this point, go into the mountscript directory, open all the files you find
# there in a text editor, and add in the mountpoints you want to use after the
# UUID parameter to 'partop' (an internal function defined in this file for the
# scripts).
# ** The first time you simply MUST run "./domount t" in order to see that the
# 'mount' commands are correct! **
# After this is done, run "./domount" and it will go ahead and mount the disks.
# Run "./domount u" and it will unmount everything. (No options exist for
# individual partitions as yet).
# Limitations
# ===========
# * If you use domount to mount loopback images inside real partitions and the
# real partitions are also mounted by domount, well, domount will try to
# unmount them in the same order as when it mounts... and it will break.
# Simple solution: skip however many real [p]artitions you have, then
# re-run domount again. :)
# * If you change a disk (eg add a partition), well, you'll have to delete the
# file for that disk, re-scan (domount will not touch the other scripts) then
# re-add your partitions back in. This program wasn't really designed to deal
# with that kind of situation :)
# * This program does not support LVM partitions - quite frankly, it doesn't
# even realize such things exist. Thus you will not find any LVM partitions
# listed in the generated scripts, or any "LVM partitions ignored"
# messages - indeed, if you only have LVM partitions on a given disk, the
# resulting syntactically incorrect script will contain an 'if' block with
# no content and the shell will produce an error.
toollist=
needtool=0
for tool in find lsblk blkid cfdisk xargs grep tail mountpoint; do
type -P $tool > /dev/null 2>&1
if [ $? -eq 0 ]; then
toollist="${toollist} ${tool}"
else
toollist="${toollist} [${tool}]"
needtool=1
fi
done
if [ $needtool -eq 1 ]; then
echo "This program requires the following tools in order to run. Those marked with"
echo "brackets cannot be found (using \`type') and their containing packages"
echo "likely need to be installed."
echo $toollist
exit 1
fi
sizes=(bytes KB MB GB TB)
progname=$(basename $0)
if [ -d ".mountscripts" ]; then
scriptdir="$(pwd)/.mountscripts"
elif [ -d ".${progname}-mountscripts" ]; then
scriptdir="$(pwd)/.${progname}-mountscripts"
fi
if ([[ ! -d "${scriptdir}" ]] && [[ "$1" != "s" ]]) || [[ "$1" == "h" ]]; then
cat << EOF
usage: $0 [s] [t]
s = scan
t = test run (USE THIS THE FIRST TIME AFTER YOU HAVE DONE A SCAN)
EOF
exit 1
fi
if [[ "$1" = "s" ]]; then
echo -n "Scanning disk tables... (by name)"
parttable=(); while IFS= read -r line; do parttable+=("$line"); done < \
<(find /dev/disk/by-id/ -name "scsi-SATA*" -name "*-part*" -type l | xargs stat -L -c "%t-%T %n")
echo -n ", (by UUID)"
uuidtable=(); while IFS= read -r line; do uuidtable+=("$line"); done < \
<(find /dev/disk/by-uuid/ -type l | xargs stat -L -c "%t-%T %n")
echo -ne " [ok]\nRunning blkid..."
blkidtable=(); while IFS= read -r line; do blkidtable+=("$line"); done < \
<(blkid)
echo -ne " [ok]\nRunning lsblk (uno momento)..."
lsblktable=(); while IFS= read -r line; do lsblktable+=("$line"); done < \
<(lsblk -bro name,size,fstype,model | grep -v group | tail -n +2)
echo -e " [ok]\n"
if [ ${#parttable[@]} -ne ${#uuidtable[@]} ]; then
echo 'Something is very wrong with either this program'
echo 'or your disk configuration. O.o'
exit 1
fi
echo -e "Using scriptdir \"${scriptdir}\".\n"
echo -ne "\e[1GCompiling mapping table... [ ]\e[?25l"
max=$[${#parttable[@]}*${#parttable[@]}]
runindex=0
for ((i = 0; i < "${#parttable[@]}"; i++)); do
partsplit=(${parttable[$i]})
devok=0
devname="$(readlink -f ${partsplit[1]})"
partsize=
for uuid in "${uuidtable[@]}"; do
uuidsplit=($uuid)
c=$[((runindex*43)/$[max-1])]
echo -ne "\e[29G"
if [ $c -gt 0 ]; then eval \printf "%.s#" {0..$c}; else echo -n '.'; fi
if [ $c -lt 43 ]; then eval \printf "%.s." {$[c+1]..43}; fi
((runindex++))
if [[ "${partsplit[0]}" = "${uuidsplit[0]}" ]]; then
partlabel=
devok=1
for entry in "${blkidtable[@]}"; do
if [[ "${entry:0:$[${#devname}+9]}" != "${devname}: LABEL=\"" ]]; then continue; fi
partlabel="${entry:$[${#devname}+9]}"
partlabel=$(echo -n $(echo $partlabel | cut -d'"' -f1))
done
for entry in "${lsblktable[@]}"; do
entry=($entry)
if [[ "/dev/${entry[0]}" != "$devname" ]]; then continue; fi
partsize=${entry[1]}
parttype=${entry[2]}
done
if [ ! partsize ]; then
echo "$0: error: cannot determine partition size for $devname"
exit 1
fi
devline="${partsplit[1]:26} ${uuidsplit[1]:18} ${partsize} ${parttype}${partlabel:+ $partlabel}"
map[${#map[@]}]="$devline"
fi
done
if [ $devok -eq 0 ]; then
checkparttable[${#checkparttable[@]}]="${parttable[$i]#* }"
fi
done
echo -e "\e[?25h\e[75Gdone.\n"
if [[ ${#checkparttable[@]} -gt 0 ]]; then
cat << EOF
Warning: The following partitions do not have matching UUID entries
in /dev/disk/by-uuid/.
Linux seems to be quite smart, and won't list UUIDs for LVM
members, partitions \`mount' cannot mount without the -t flag,
or extended partition headers, but /dev/disk/by-id/ will still
list them. So these are probably not a problem but may still
warrant a double-check; if these contain valid filesystems you
will need to insert them manually since their UUIDs cannot be
calculated.
EOF
for partition in "${checkparttable[@]}"; do
echo " >> $(readlink -f $partition) (/dev..by-id/${partition:26})";
done
echo
fi
find /dev/disk/by-id/ -name "scsi-SATA*" -not -name "*-part*" -type l | while read disk; do
scriptfile="${scriptdir}/${disk:26}.mount.sh"
rm -f "${scriptfile}"
if [ ! -f "${scriptfile}" ]; then
echo -ne "No mountscript found for disk ID \"${disk:26}\", creating one...\nRunning cfdisk... "
cfdtable=(); while IFS= read -r line; do cfdtable+=("$line"); done < \
<(cfdisk -Ps $disk | grep -v "Free Space" | grep -v "Unusable" | tail -n +6)
echo -ne "[ok]\nRunning smartctl... "
smartctlinfo="$(smartctl -i $disk)"
diskdevname="$(readlink -f ${disk})"
diskdevname=${diskdevname:5}
disk="${disk:26}"
disktable[${#disktable[@]}]="${disk}"
tmp=
diskparttable=
for entry in "${lsblktable[@]}"; do
entry=($entry)
if [[ "${diskdevname}" != "${entry[0]}" ]]; then continue; fi
devicename=$(echo -n $(echo "${entry[@]}" | cut -d' ' -f3-))
done
echo -e "# Script generated by domount at $(date +'%T on %D (MM/DD/YY)') for disk \"${devicename}\"\n" > "${scriptfile}"
echo '# '$(echo "$smartctlinfo" | grep '^Model Family:') >> "${scriptfile}"
echo '# '$(echo "$smartctlinfo" | grep '^Device Model:') >> "${scriptfile}"
echo -e '# '$(echo "$smartctlinfo" | grep '^User Capacity:')"\n" >> "${scriptfile}"
for part in "${map[@]}"; do
if [[ "${part:0:$[${#disk}+1]}" != "${disk}-" ]]; then continue; fi
diskparttable="${diskparttable}${part}\n";
done
mapfile -t diskparttable < <(echo -ne "${diskparttable%%\\n}" | sort -n -k1.$[${#disk}+6]n)
echo -ne "if diskexists ${disk}; then\n\t\n" >> "${scriptfile}"
for part in "${diskparttable[@]}"; do
partsplit=($part)
parttype=
for line in "${cfdtable[@]}"; do
line=($line)
if [[ "X${partsplit[0]:${#disk}+5}X" != "X${line[0]}X" ]]; then continue; fi
parttype="${line[1]}"
done
if [[ "X${parttype}X" = "XX" ]]; then
echo "$0: error: Cannot parse cfdisk output"
rm -f "${scriptfile}"
exit 1
fi
echo -ne "\t# Partition: #${partsplit[0]:${#disk}+5} (${parttype}, ${partsplit[3]}" >> "${scriptfile}"
if [[ "${partsplit[3]}" = "swap" ]]; then
echo -n " - Skipping" >> "${scriptfile}"
fi
echo -n "); Size: " >> "${scriptfile}"
sizeidx=0
size=${partsplit[2]}
while [ $size -gt 0 ]; do
sizetext="${size}${sizes[$sizeidx]} ${sizetext}"
size=$(($size/1024))
((sizeidx++))
done
sizetext=($sizetext)
for ((i = 0; i < 2; i++)); do
if [ $i -eq 1 ]; then echo -n ' (' >> "${scriptfile}"; fi
if [[ "${sizetext[$i]: -1:1}" = "s" ]]; then
echo -n "${sizetext[$i]:0:-5} bytes" >> "${scriptfile}"
else
echo -n "${sizetext[$i]:0:-2} ${sizetext[$i]: -2:2}" >> "${scriptfile}"
fi
if [ $i -eq 1 ]; then echo -n ')' >> "${scriptfile}"; fi
done
if [[ "X${partsplit[4]}X" != "XX" ]]; then
echo -n "; Label: \"" >> "${scriptfile}"
echo $(echo -n "${part}" | cut -d' ' -f5-)"\"" >> "${scriptfile}"
else
echo >> "${scriptfile}"
fi
if [[ "${partsplit[3]}" != "swap" ]]; then
echo -e "\tmountpart /dev/disk/by-uuid/${partsplit[1]} \n\t" >> "${scriptfile}"
else
echo -e "\t" >> "${scriptfile}"
fi
done
echo "fi" >> "${scriptfile}"
echo -e "[ok]\nSuccess!\n"
#echo ---; cat $scriptfile; echo ---
else
echo "Script found for disk ID ${disk}"
fi
done
exit
fi
trap 'echo; exit' SIGINT
echo -ne "Using scriptdir \"${scriptdir}\".\nRunning mount..."
mapfile -t mounttable < <(mount)
echo -e " [ok]"
function spin() {
trap 'echo -e "\e[?25h"' SIGINT SIGQUIT SIGKILL
echo -ne "\e[?25l"
if [[ $unicode -eq 1 ]]; then s=$(printf \\u2580\\u259C\\u2590\\u259F\\u2584\\u2599\\u258C\\u259B); m=8; d=0.03; else s='/-\|'; m=4; d=0.07; fi
("$@" & pid=$! ; c=1; while ps -c $pid 2>&1>/dev/null; do echo -ne "\e[s${s:c:1} \e[u"; c=$[c+1]; test $c -eq $m && c=0; sleep $d; done)
echo -ne "\e[?25h"
trap SIGINT SIGQUIT SIGKILL
function diskexists {
disk=/dev/disk/by-id/scsi-SATA_${@}
if [[ ! -L $disk ]]; then
echo "(Disk $0 is not installed)"
else
echo "[Disk ${1}]"
fi
function partop {
if [[ $mode -eq 1 ]]; then
while true; do
echo -n "Unmounting ${1##*/}... "
if ! mountpoint > /dev/null 2>&1 $2; then
echo "(Not mounted, or not a mountpoint)"
break;
fi
if [ ! -d $2 ]; then
echo "error: Not a directory!"
break
fi
cmd="umount $1"
if [[ ! $testmode ]]; then
output="$(${cmd} 2>&1)"
err=$?
else
echo "{would run: ${cmd}} "
fi
if [[ $err = 0 ]]; then
if [[ ! $testmode ]]; then echo "[ok]"; fi
return
else
echo -e "\n== umount error =="
echo -n "${output}"
echo -e "\n=================\n"
c=X;
while [[ ! $c =~ (R|r|P|p|D|d|Q|q) ]]; do read -sn1 -p"[R]etry/Skip [P]artition/Skip [D]isk/[Q]uit? " c; echo $c; done
echo
case $c in
D|d) skipdisk=1; break ;;
P|p) break ;;
Q|q) exit ;;
esac
fi
done
else
if [[ $skipdisk = 1 ]] && [[ $newdisk = 0 ]]; then return; fi
err=0
skipdisk=0
newdisk=0
while true; do
echo -n "${1##*/} -> $2: "
if mountpoint > /dev/null 2>&1 $2; then
echo "(already mounted)"
break;
fi
if [[ $testmode == 0 ]]; then echo echo -n "Mounting"; fi
if [ ! -d $2 ]; then
echo -n " (creating dir $2"
cmd="mkdir -p $2 2>&1"
if [[ ! $testmode ]]; then
output="$(eval $cmd)"
err=$?
else
echo -n " {would run: $cmd}"
fi
echo -n ') '
fi
if [[ $err = 0 ]]; then
if [[ $testmode == 0 ]]; then echo -n '... '; fi
cmd="mount $@"
if [[ ! $testmode ]]; then
output="$(${cmd} 2>&1)"
err=$?
else
echo "{would run: ${cmd}} "
fi
else
echo
fi
if [[ $err = 0 ]]; then
if [[ ! $testmode ]]; then echo "[ok]"; fi
return
else
echo -e "\n== mount error =="
echo -n "${output}"
echo -e "\n=================\n"
c=X;
while [[ ! $c =~ (R|r|P|p|D|d|Q|q) ]]; do read -sn1 -p"[R]etry/Skip [P]artition/Skip [D]isk/[Q]uit? " c; echo $c; done
echo
case $c in
D|d) skipdisk=1; break ;;
P|p) break ;;
Q|q) exit ;;
esac
fi
done
fi
if [[ $1 = "u" ]]; then mode=1; else mode=0; fi
if [[ $1 = "t" ]]; then testmode=1; fi
scripts=(${scriptdir}/*.mount.sh)
for ((i = 0; i < ${#scripts[@]}; i++)); do
newdisk=1
. ${scripts[$i]}
if (($i < ${#scripts[@]} - 1)); then echo; fi
done
echo -ne "\e[?25h"
Hopefully someone else finds this helpful. I am aware of udev/automount; that was overkill, since the disks are always installed, and I don't need a system whose focus is on-the-fly detection of newly inserted media of whatever kind.
-i336
Last edited by i336 (2011-11-10 04:42:08)

Thanks. I might use it soon...
Does it automatically make folders named after the volume labels? And does it handle the conversion of spaces and non-alphanumeric characters to octal codes?
I could read the script but it would be faster for everyone reading, if you leave the answer as a reply.
I also think that there should be some major work done on modernizing the fstab, either by replacing it with a better implementation of file system mounting or changing the file structure and adding in better handling of non-alphanumerics. I don't want to have to look up a stupid octal table every time I type in my labels.

Adobe Creative Cloud can't signin is there alternative to downloading these programs?

I just purchased Adobe Creative Cloud and when went to sign in all it would do is sign me out in which I never got to sign in lol is there alternative way to download this software as I have Photoshop and Lightbloom

Finally, after- how long? - two months? I have uploaded the new Creative Cloud. Only to find that all the programs have been upgraded from CS6 to CC.
This ranks as the worst piece of customer-relations I've ever come across. Even though I asked for instructions the Staff member dealing with me got fed-up and just dumped me.
I kept trying - and today - finally I got it fixed.
It took 20 minutes to download, at 20Mbps! There were no intermediate instructions, I wasn't told what was happening. Suddenly the Install screen disappeared - the new Creative Cloud didn't open, I had to go find it.
Adobe - this is not good. I suggest you find the boss of this team and quietly boot them out of the door.

Lync Reverse Proxy Alternatives

When migrating from OCS 2007 to Lync 2010, we balked Microsoft’s recommendation to deploy Forefront Threat Management Gateway (or ISA) just to get the reverse proxy services.
TMG is way too expensive and complex for such a limited, simple use case.
I didn't find much information on what people are using as free alternatives to ISA/TMG, so I decided to post this discussion in case there are others out there who are interested.
We decided to use Apache 2.2 on Windows Server 2008 R2.
Here's how we configured it:
Read here to understand what features require a reverse proxy, and follow the steps to configure your FQDNs, Network Adapters and (maybe) obtain an SSL Certificate for the reverse proxy.
http://technet.microsoft.com/en-us/library/gg398069.aspx
Download and install the latest stable release of Apache with OpenSSL on your reverse proxy server.
http://httpd.apache.org/download.cgi
We're using the same certificate on the reverse proxy that we use on our front end server (it has the appropriate SANs), so we need to convert it to PEM format for use with Apache:
Use the Certificates MMC on your front end server to export the certificate and include the private key.
Transfer the resultant .pfx file to your reverse proxy server.
Use OpenSSL to convert your .pfx file to PEM:
openssl pkcs12 -in c:\pathto\yourcert.pfx -out c:\pathto\yourcert.pem –nodes
Separate the private key from the certificate using notepad:
Open the new .pem file and cut the text from the beginning of the file through the end of the “----END RSA PRIVATE KEY----“ tag.
Save that text to a new file named
yourcert.key.
Save
yourcert.pem, which should now only include the certificate.
Copy (or move) the certificate and private key to the Apache configuration directory. We like to use: C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\extra\ssl
for storing the certificates.
Edit httpd.conf (typically in
C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf) to enable and configure the proxy and SSL features:
(See http://httpd.apache.org/docs/2.2/mod/mod_proxy.html
for more information on each directive)
Uncomment the following lines, which will enable proxy and SSL:
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule ssl_module modules/mod_ssl.so
Include conf/extra/httpd-ssl.conf
Add the following lines to configure reverse proxy behavior:
#Be a reverse proxy, not a forward proxy
ProxyRequests Off
#Accept requests from any client to any URL
<Proxy *>
Order Deny,Allow
Allow from all
</Proxy>
#Set the network buffer to improve throughput
ProxyReceiveBufferSize 4096
#Configure the Reverse Proxy to forward all requests to your front end server on 4443
ProxyPass / https://yourfrontend.domain.com:4443/
ProxyPassReverse / https://yourfrontend.domain.com:4443/
#Preserve Host Headers for Lync
ProxyPreserveHost On
Optionally, configure logging directives, bindings and server name.
Save and close httpd.conf
Edit httpd-ssl.conf (typically in conf\extra):
Configure the session cache:
Uncomment:
SSLSessionCache “dbm:C:/Program Files (x86)/Apache Software Foundation/Apache2.2/logs/ssl_scache”
Comment out:
SSLSessionCache “shmcb:C:/Program Files (x86)/Apache Software Foundation/Apache2.2/logs/ssl_scache(512000)”
Locate the <VirtualHost _default_:443> tag and configure the following:
Add the following directive:
SSLProxyEngine On
Configure the path to your SSL Certificate saved in step 3-5 above:
SSLCertificateFile “C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\extra\ssl\yourcert.pem”
Configure the path to your private key saved in step 3-5 above:
SSLCertificateKeyFile “C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\extra\ssl\yourcert.key”
Optionally, configure the SSLCACertificateFile (you can download the appropriate bundle from your CA).
Optionally, configure logging directives.
Save and close httpd-ssl.conf
Restart the Apache2.2 service
Configure public DNS records and appropriate firewall rules to allow public http/https traffic to the external interface of your reverse proxy, and to allow the internal interface of
the reverse proxy to talk to the front end Lync server on 8080 and 4443.
From an external connection, test connectivity through the reverse proxy:
Test
https://dialin.company.com (friendly URL for getting dial-in information, if you’re using voice conferencing)
Test the Lync Web App by setting up an online meeting and following the URL to join the meeting.
You can force the use of the web app by appending ?sl= to the end of the meet.company.com link.
See this for more information http://blogs.technet.com/b/jenstr/archive/2010/11/30/launching-lync-web-app.aspx
Hope this information is helpful and saves some of you some money and trouble.
Please contact me if you need further clarification or see any mistakes in my notes.
Best regards,
Kenneth Walden
Enterprise Systems Supervisor
GSD&M
Austin, TX

I'd like to thank you for this article. We were setting up Apache RP for Lync .... needless to say they weren't too excited to learn this new (and highly complex with lots of specific undocumented requirements) Microsoft product. Anyways, your
blog saved me a LOT of headache. I owe you big time.
AWESOME JOB.
-Greg
*****EDIT***
Decided to come back in there and post good information. We had issues with EXTERNAL and ANONYMOUS users being able to attend a meeting. The "DIALUP" url was working fine but the "MEETING" url was broken. On our WFE servers we were getting
the event error as below.   Turns out that our reverse proxy was not set to "PROXYPRESERVEHOST ON". Once we put that in there ALL was good.
Notice that the MEET portion was the only thing that was really broken. So, if you can get DIALUP to work, but MEET doesn't ... your RP is working to FW the 443 to the 4443 correctly but you're RP is sending the wrong HEADER. Look for
http://10.x.x.x/meet/ or soemthing in the event logs.
Log Name:      Application
Source:        ASP.NET 2.0.50727.0
Date:          11/16/2011 1:26:35 PM
Event ID:      1309
Task Category: Web Event
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      OneofMyInternalWFEservers.local
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 11/16/2011 1:26:35 PM
Event time (UTC): 11/16/2011 6:26:35 PM
Event ID: b2039ecd0a62482284030f62e1e639d8
Event sequence: 129
Event occurrence: 28
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/34578/ROOT/meet-1-129658725547585993
    Trust level: Full
    Application Virtual Path: /meet
    Application Path: C:\Program Files\Microsoft Lync Server 2010\Web Components\Join Launcher\Ext\
    Machine name: MYWFE.local
Process information:
    Process ID: 14204
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: HttpException
    Exception message: Server cannot append header after HTTP headers have been sent.
Request information:
    Request URL:
https://FQDN:4443/meet/MyName/456456
    User host address: gatewayIP
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 7
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Web.HttpHeaderCollection.SetHeader(String name, String value, Boolean replace)
   at Microsoft.Rtc.Internal.WebServicesAuthFramework.OCSAuthModule.EndRequest(Object source, EventArgs e)
   at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="ASP.NET 2.0.50727.0" />
    <EventID Qualifiers="32768">1309</EventID>
    <Level>3</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-11-16T18:26:35.000000000Z" />
    <EventRecordID>4483</EventRecordID>
    <Channel>Application</Channel>
    <Computer>XXXXXXXXXXXXXXXXXX</Computer>
    <Security />
</System>
<EventData>
    <Data>3005</Data>
    <Data>An unhandled exception has occurred.</Data>
    <Data>11/16/2011 1:26:35 PM</Data>
    <Data>11/16/2011 6:26:35 PM</Data>
    <Data>b2039ecd0a62482284030f62e1e639d8</Data>
    <Data>129</Data>
    <Data>28</Data>
    <Data>0</Data>
    <Data>/LM/W3SVC/34578/ROOT/meet-1-129658725547585993</Data>
    <Data>Full</Data>
    <Data>/meet</Data>
    <Data>C:\Program Files\Microsoft Lync Server 2010\Web Components\Join Launcher\Ext\</Data>
    <Data>SNKXS300</Data>
    <Data>
    </Data>
    <Data>14204</Data>
    <Data>w3wp.exe</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>HttpException</Data>
    <Data>Server cannot append header after HTTP headers have been sent.</Data>
    <Data>XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX</Data>
    <Data>/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX</Data>
    <Data>10.71.1.1</Data>
    <Data>
    </Data>
    <Data>False</Data>
    <Data>
    </Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>7</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>False</Data>
    <Data>   at System.Web.HttpHeaderCollection.SetHeader(String name, String value, Boolean replace)
   at Microsoft.Rtc.Internal.WebServicesAuthFramework.OCSAuthModule.EndRequest(Object source, EventArgs e)
   at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
</Data>
</EventData>
</Event>

Alternative to RealPlayer on E71x

Similar Messages

Maybe you are looking for