Alternative to RFC connections - eCATT
Hi Friends,
I had created script1 with user1 and script2 with user2. I wanted to run both the scripts continuously using script1 with user1 and script2 with user2.
The above case i am doing with RFC connections. I had created 2 RFC connections and i had mentioned RFC connections in the ScIPTs. I am able to run sucessfully.
My customers don't want work in the above way beacuse so many connections will be there in SM04 transcation code. This will use lot of bandwidth and space.
Is there any alternative to achive the above scenario. Can any one please help me on this .
Regards,
Mahendra
> I had created script1 with user1 and script2 with user2. I wanted to run both the scripts continuously using script1 with user1 and script2 with user2.
>
> The above case i am doing with RFC connections. I had created 2 RFC connections and i had mentioned RFC connections in the ScIPTs. I am able to run sucessfully.
>
> My customers don't want work in the above way beacuse so many connections will be there in SM04 transcation code. This will use lot of bandwidth and space.
I do not see the problem here, you need two uers in the target system to run your scripts (as you say in your first sentence) so whether they log on via RFC or any other way shouldn't matter as far as I can see.
Maybe if you briefly explain wat both scripts are doing we can help you find a solution to that problem in a way that satisfies your customer.
Jurjen
Similar Messages
-
RFC connection error in recording eCATT from Solman
Hello,
I am trying to record eCATT from Solution Manager into our DEV box. I have set-up the RFC connection and tested them.
When trying to recording I got the following message:
"RFC error ThControl: illegal sap_dext call !!!/ connection"
Any suggestion?
Thank you.Hi
Did you ever find any solution for this, as I am receiving same error even though seems that all settings are in place?
Thanks! -
Create RFC connection during an Ecatt
hey guys
can anyone send me a document or explain me the steps to create an RFC connection when we create an ECatt in parent and child clients .Hi Parag,
Creating an RFC connection should be done through SM59.
In SECATT.,
1. Create System Data Container
2 .Give title in the attributes
3. In System Data, name the target system
4. Specify a RFC destination that links or connects to the target system.
Thanks.
Regards,
Muthu Kumaran KG -
Hi
I am trying to edit test partner script from eca script, but i am getting one error 'ecatt error ECATT_STORE_BLOB(2)
saving of blob denied for security reasons. you may not be in the edit mode of ecatt ' when i click on ok button it is telling error during RFC connection and whatever changes i made in test partner is not saved.
How to solve this problem. Please help me.Is it working fine in the standalone mode?
Refer to the below checklist for trouble shooting:
1) Maintenance of DSN settings to the databases - TP_EDIT and TP_EXEC
2) Maintenance of R/3 connection parameters
3) Refer eCATT Security guide
4) Refer OSS note - 519858
Please note that for an integration Scenario, the connection and user information is required so that appropriate rights are established automatically.
Hope this helps! -
EWA RFC connection SETUP - From Customer system to VAR solution Manager
Hi,
we are going to setup the EWA for our customers. So how I have to create the RFC from the customer system to our Solution Manager?
Thanks
Andrea>
Andrea Taccolini wrote:
> we are going to setup the EWA for our customers. So how I have to create the RFC from the customer system to our Solution Manager?
Hi Andrea,
Have you already tried to use SMSY to generate the "Back" Destination from customer system to your SolMan?
Once you have selected the customer system in SMSY, you are able to use the RFC connection wizard.
Alternatively, you can define the RFC destination manually.
For easier tracking and trouble shooting, I would recommend to setup a communication user in your SolMan for each individual connected managed customer system.
Assign the appropiate profiles to the user in your SolMan system and create the RFC destination in the managed customer system.
Best regards,
Ruediger -
Hi Gurus,
I have a problem when i try to do a RFC connection Between SAP and Windows, this's the error message log Tx, sm59..
EntrSist. Error de conexión
Det.error / CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=236 SAP gateway connection failed. I
Det.error ERROR: SAP gateway connection failed. Is SAP gateway started?
Det.error LOCATION: SAP-Server devinc_ICT_02 on host devinc (wp 1)
Det.error COMPONENT: CPIC
Det.error COUNTER: 6
Det.error MODULO:
Det.error LINE:
Det.error CÓD.RETORNO: 236
Det.error SUBRC: 0
Det.error RELEASE: 700
Det.error TMP.: Tue Aug 31 11:13:57 2010
Det.error VERSIÓN:Anup,
the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
make an entry like that:
sapmsDEV 3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
kind rtegards, achim -
RFC connection Error in SLDCheck
Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
RegardsThanx for reply
when I test connection to Connection Test SLD_UC error
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program SLD_UC not registered
Error Details LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details DETAIL: TP SLD_UC not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 62
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:05:42 2010
Error Details VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon Cancel
Error Details max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details ERROR: max no of 100 conversations exceeded
Error Details LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details COMPONENT: CPIC (TCP/IP) with Unicode
Error Details COUNTER: 82
Error Details MODULE: r3cpic_mt.c
Error Details LINE: 10791
Error Details RETURN CODE: 466
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:12:56 2010
Error Details VERSION: 3
Regards
shahid -
Rfc connection error to saposs
Hi
while testing the rfc connection to saposs msg comes timeout occured
Error: timeout occured
Location : Saprouter 37.11 on SAPDEV
Componenet: NI
Counter : 1460
Return code: -93
Subrc: 0
Release : 640
Version : 37
Plz suggest me.> Location : Saprouter 37.11 on SAPDEV
is the saprouter running on that box and is that box able to connect/ping sapserv?
Markus -
RFC connection error for PS_ACCESS_1 and PS_ACCESS_2
dear all,
i have created the RFC destination PS_ACCESS_1 and PS_ACCESS_2 with TCP/IP. i also installed WDPS* files in *sapgui\ps\access folder. now i m checking for 'TEST CONNECTION' in sm59 for PS_ACCESS_1 and PS_ACCESS_2 but it is giving 'Error when opening an RFC connection' this error. pls suggest the solution for this problem.
am i missing any other settings? i m using SAP ECC 6.0. is it comfortable with this? is it required any configuration from basis side?
regards,
vicky.HI,
please check the RFC Trace File at SM59 -> RFC -> Show trace file.
For better tracing delete the Trace File first and recheck the RFC Dest.
Regards,
Gordon -
Dear All,
when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 162003
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1973
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Mon Apr 27 14:29:33 2009
Error Details VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat -
RFC Connection error between R/3 4.7 & ECC 6.0
Hi all,
I m receiving the following error when i test the RFC connection between the mentioned systems..
/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=665#Unknown service
DEV_W0 file contains the following information:
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR service 'sapgw01' unknown
M *
M * TIME Wed Apr 22 03:59:51 2009
M * RELEASE 640
M * COMPONENT NI (network interface)
M * VERSION 37
M * RC -3
M * MODULE ninti.c
M * LINE 463
M * DETAIL NiPGetServByName: service 'sapgw01' not found
M * SYSTEM CALL getservbyname
M * COUNTER 2704
M *
M *****************************************************************************
M
A RFC 2272 CONVID 90657609
A * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {8E460E4B-7D68-4FAE-A9BD-E212DAFA6A8E})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Could any one pls. help me..
Thanks & Regards, SubbuHi all,
Thanks for ur replies.. I have added as u mentioned but i m receiving the below error??? Could u pls. suggest??
M *
M * LOCATION SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR service '?' unknown
M *
M * TIME Wed Apr 22 04:58:46 2009
M * RELEASE 640
M * COMPONENT NI (network interface)
M * VERSION 37
M * RC -3
M * COUNTER 2733
M *
M *****************************************************************************
M
A RFC 2272 CONVID 94231859
A * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {34E2D1F9-B021-4B04-BD35-16E04AF4BD11})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
thanks,
Subbu -
RFC Connection Error (for end-to-end Monitoring)
Hi,
I am configure End-to-End monitoring in XI 3.0 SP20, PMI does't show data in end-to-end monitoring... anyway!!! I check RFC connection PMI
RFC destination name: PMIXQA90020080827
in TEST connection I am getting an error: "Group PUBLIC not Found" where may I define that PUBLIC to solve this problem please let me know.... thanks
and what is Group PUBLIC in RFC ??? what does it do???
Is there any notes I can read for related issue, please help me out this
Thanks a lot in advanced
Edited by: issue2008 issue on Aug 28, 2008 10:03 AMThanks for reply... SURE I can tell you
Connection Type: 3 R/3 connection
ScreenShot shows blow:
http://www.flickr.com/photos/25222280@N03/2806290586/sizes/o/
Thanks
Edited by: issue2008 issue on Aug 28, 2008 10:20 AM -
RFC Connection error in SM59 for SAP J2EE
Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan -
RFC connection error (VPN-access)
Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
ThomHi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!! -
RFC-connection error: DETAIL: no connect of TP sapdb02 from host u0085 after 20
Hello!
I face with problem to set up successfully a RFC-connection from SOLMAN to the satellite system.
The network connection here is VPN.
The following error appears, when I execute the connetion test:
Error: Timeout during allocate
LOCATION: SAP-Gateway on host /sapgw03
DETAIL: no connect of TP sapdb02 from host after 20 sec.
COMPONENT: SAP-Gateway
Has some one any ideas how to solve this problem?
Thank you very much!
regards
ThomHi,
Did u get this issue sorted out.
Let me know if you did mate..
I think its some thing to do firewall port..
Thanks
James
Maybe you are looking for
-
please help me!
-
Colours look faded/dull in PDF
Hi everyone, I have created several PDF files (Acrobat 6.0 Professional) from Word 2003 documents. In some of them colours used in headlines (blue, red, yellow, green) look dull, even ugly while in other PDFs they look just like in original Word file
-
Differences between 1st Gen + upgrade and 2nd Gen?
Hi all. I was looking into purchasing a new iPod touch, but before I do so, I was wondering if there is any difference between getting an iPod touch 1st generation and purchasing the software upgrade and simply purchasing a 2nd generation? Reason bei
-
Just got off the phone with Verizon specialist. Tried to upgrade one of our lines. Online Verizon wants 100 bucks. Can get the same phone at Walmart for 50 bucks. I asked why that is and I got the different promotions answer and was told they und
-
I've worked on scores of documentaries and I cannot remember a single time that once the colour grade is 'complete' it is not tinkered with at a later stage. My question is, what is the best way to go back into Color after the project has been sent b