Alternative to WSUS for use with NAC

I'm looking for thoughts on alternatives to WSUS for use with Cisco Network Admission Control. I'm primarily looking for increased speed. Thanks.

I don't see the value in getting that particular time on the first day of the current monthYou're completely right about that.
That makes me assume on some autopilot that we have another case of YASTDCOVV or YACOSTADISC
+'Yet Another String To Date Comparison Or Vice Versa' or 'Yet Another Case Of Storing Time And Date In Separate Columns'+
However, three other people interpreted the request the same yet different than I did so my assumption is probably wrong Only Evaleah can tell....
Edited by: hoek on Oct 21, 2009 8:54 PM OP has a name, you blunt Hoek, so use it!

Similar Messages

V-41 tcode error :Table 304 is not defined for use with condition type PR00

Hi All,
I am trying to create a BDC using the transaction V-41.
The first screen has fields:
ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
Then an error message is displayed:
Table 304 is not defined for use with condition type PR00
This behaviour is not allowing me to use the BDC feature.
Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
Can anything be done via customizing?
Regards,
Namita.

Dear ILHAN ,
Well the problem you are facing is having the following solution:
Table 304 is not defined for use with condition type PR00
Message no. VK024
Diagnosis
The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
Procedure
Úse F4 help to choose a valid condition type.
If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
I hope this helps.
It has worked for me.
I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
Please award points if you find it useful.
Regards,
Rakesh

Does FrameMaker 12 have an LEID value for use with serialization via AAMEE?

Does FrameMaker 12 have an LEID value for use with serialization via AAMEE?

I wish life was that easy :-).
You have a valid argument; So I had this kind of test going. I had 50,000 messages of
type-1 first loaded into the queue. Then I had 100 messages of type-2 loaded on to the
queue.
At this point, I issued a conditional dequeue that skipped type-1 messages and only
asked for type-2 messages. I saw the full table scan.
Then I created another test case 1 million type-1 messages had to be skipped.
Still full table scans. I am not convinced that the doing full table scans is the best query
plan out there. Cost Based Optimizer tends to disagree for some reason. May be
it is right; But I have to avoid FTS when possible. As you know, not only blocks
used by the existing rows in the table get scanned, but also every block until the
high water mark level.
One might say for a table with volatile data that comes and goes on a daily basis, million is an extreme case. Howvere, I am building a general purpose infrastructure based
on AQ and cannot rule out consumers who misbehave.
Are there better ways to handle multiple types of consumers on a single physical queue ? I need to be able dequeue specific consumer types if necessary, and this has to be
done in a performant manner.
Other alternatives I can think are
1. Using a multi consumer queue such that there is one subscriber for each message
type. Use multiple agent sets in a listen method to listen to messages and then
control what agents we pass into listen method.
Any pattern suggestions welcome.
Thanks
Vijay

Can PowerPC applications be converted for use with Lion OSX? If so, how?

Can PowerPC applications be converted for use with Lion OSX? Ifso, how?

Three workarounds:
1. If your Mac supports it, partition your internal hard drive or use an external drive and install Snow Leopard. Then you can "dual-boot" into Snow Leopard when you want to run your PowerPC applications.
2. Upgrade and/or find alternative replacements for your PPC software that run without Rosetta.
3. Install Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on images to enlarge]
Or in Mountain Lion:
Full Snow Leopard installation instructions into Parallels 7 are here:
http://forums.macrumors.com/showthread.php?t=1365439

Import "general use" certificate for use with Exchange

Usually (that's the way I've always done it), we create a certificate request on the Exchange server, submit the request to the certificate authority (preferably a 3rd party public CA) and then import and enable the certificate for the appropriate Exchange
functions: IIS, SMTP, IMAP. POP, for example.
What if the company already has a wildcard certificate obtained for others uses or general use (that's how it was described to me).
It was suggested that we might just use that certificate...
I think it would be best to "go by the book" and proceed as mentioned above (creation of cert request on the Exchange server, submission to CA, and so forth). After all, you can obtain a certificate appropriate for use with Exchange for just over
$50.
But is the other option even possible?
I know you can export an Exchange certificate obtained by what I believe to be the preferred way and import it on another Exchange server or on a ISA/TMG machine.
But could you export a certificate from an Apache web server or a firewall device or... just something else, and use it for Exchange?
This article seems to suggest you could:
http://www.sslshopper.com/move-or-copy-an-ssl-certificate-from-an-apache-server-to-a-windows-server.html
But from what I know about Active Directory Certificate Services, there are all kinds of templates for various uses (disk encryption, email, code signing, etc.), presumably not interchangeable.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

So you want to export the existing wildcard certificate from a non-Windows system and import it to the Exchange server, correct?
The article shows that openssl will create a PFX (PKCS#12) file - so this should work.
I would not worry about templates. If the existing certificate is a SSL certificate (Extended Key Usage = Server Authentication) it should be OK.
From "PKI Best Practices" perspective / "what a certificate actually is intended to be" it would be better to have a dedicated certificate including all the Subject Alternative Names needed by Exchange - but I know there are limitations to a certain number
of names by public CAs. But theoretically if you ever wanted to revoke this wildcard certificate you would get into troubles as the same certificate is on very different systems.
Elke

Best POS system for use with Mac?

What is the best POS system for use with Mac? Using Quickbooks and paper invoices and inventory. Would like to upgrade to POS system.

Ideally it is best to have seperate (discreet) EHD's for a PC and Mac due to their differences in HD formatting. However, this is not always feasable but there are alternative solutions availble. Among those are:
Creating and useing a Dropbox account that can be shared by PCs, Macs, IOS and Android devices. Dropbox allows for 2GB of free storage and additional storage is available for a small monthly fee.
Another possiblity is formating an EHD so that it may be shared by both a PC and Mac, this format is FAT 32. The downside of doing this is the size of the files written to the HD are limited to 4GB.

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows. The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.

HT3529 Is there a way to create, store and use preset messages for use with "Messages"?

Is there a way to create, store and use preset messages for use with "Messages". I often have a recurrinig message to send, after a repeating event, and need to enter the same short message each time. It would be nice to have this short message stored and selectable so that I do not need to enter each time.

found an answer that seems to work:
https://discussions.apple.com/message/17997300#17997300

Can i buy an iPhone at a pawn shop and get it unlocked for use with Straight Talk wireless?

Just wondering if I can buy a used iphone at a pawn shop or on ebay and get it unlocked for use with the prepaid Straight Talk wireless service? If so, how much would it cost to get it unlocked?

PHones can only be unlocked from the carrier; if you're looking for an unlocked device I'd recommand buying it directly from Apple as that is the only way to promise it is, if you buy it second hand you may find it is locked to a carrier who doesn't support unlocking, or worst yet activation lock

Best drum loops for use with Logic? Ease of use, usability, etc.

Hi,
I have BFD2 but find it slow to load and sometimes clumsy auditioning loops within Logic. I love the Apple Loops library but I wondered if people are importing MIDI drum files for use with Logic. Do all drum files use the same MIDI mapping? If I drop a BFD2 loop into a Logic drum virtual instrument will it work? I bought a few packs from Groove Monkee but have yet to use them with Logic. I only use them within BFD2.
I'm basically looking for a seamless way to stay within Logic to improve my workflow. It's taken me days sometimes to get a drum track right by going back and forth with BFD2. Is there a concept I'm missing that would make it easier?
Thanks

try Stylus RMX by Spectrasonics. http://www.youtube.com/watch?v=FlgP1q1HCj4

Unlocked old iPhone 3GS for use with pay as you go sim in the UK on vacation. O2 sim works while ph plugged in. Unplugged, works short time and crashes. Sometimes won't even re-boot. Software on phone up to date as far as 3GS goes.

I brought an old IPhone 3GS to the UK on vacation for use with sim card. I had the phone unlocked with approval and instructions from ATT. Store in the UK recommended O2 pay as you go sim which works as long as the phone remains plugged into the wall. Once unplugged, it will work for a short time and then always crashes. Sometimes it will re-boot and crash again and sometimes it will not re-boot at all. One store told me to sync with itunes which I did on my Mac Book. I don't know if the sim is defective or if the software of the 3GS is just not compatible with the sim when on the battery. I have updated the software on the phone as far as it will go. Any suggestions? Maybe the phone is too old to use with the latest pay as you go sim cards. I am disappointed that this phone has not been reliable as a pay as you go and I have had to purchase a UK phone here in order to have a reliable phone.

There is nothing you can do. You bought an illegally unlocked phone off Ebay. A lot of sellers there will tell you it is unlocked but the first time you try to update the operating system it will put the lock back on to the carrier the phone was originally locked to. Sorry but unless the carrier it was locked to will unlock the phone I am afraid you have a very expensive paper weight now. You should have bought it from a reputable dealer instead of ebay.

Doesn't play songs, "itunes is not configured for use with mac-formatted"??

Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
Thanks for any thoughts!

Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
If there is anyone out there that can help please do!
Windows XP

Alternative to WSUS for use with NAC

Similar Messages

Maybe you are looking for