Alternative unit at Confirmation screen

Dear All,
For a material BUM is TON but i have maintained Unit PC as production unit in Work scheduling view. but when i go to confirm the order of that material automaticallt unit TON appears instead of PC. why PC is not appearing there.

Hi
If you already maintained alternate units in the additional data of material master, it is possible to change the units in any screen and in the confirmation screen input pc manually and enter and the corresponding quantity will be displayed. Hope this will help you. By default it will take production units
Thx krishna

Similar Messages

  • No alternative unit of measure specified

    Hi,
    We are encountering no alternative unit of measure specified upon confirming the process order in COR6. What might be the problem. The base unit of measure is properly maintained in MM. Base unit of measure is Btl and the unit of issue is case.
    Hope you could help us.
    Thanks

    Hi
    In the confirmation screen, in the yeild  unit field is there. open the field there and check whether you units are displayed there or not. If they are not defined there then open the table and update your units there
    Krishna

  • Alternative unit of measure issue in PP in Food industry

    Hi,
    I want clarification regarding alternative units
    here sales order unit is master cartons,,
    production people will produce in pieces,,
    we are applying 40 strategy here,,,,
    so based on master cartons,,MRP will give planned orders in master cartons i think,, when we convert it into process order it should be in pieces. (can we get this by entering prod unit---PC,,,in work scheduling view)
    i want to enter Yield in pieces in confirmation field,,, and i want to do GR in master cartons ...
    is it possible to maintain production order qty in one unit and GR in other unit?
    plz suggest me...
    Edited by: sathishreddy on Dec 23, 2010 12:31 PM

    production order qty in one unit and GR in other unit?
    Not possible
    create a BUOM as carton for the material
    and Production unit as PC
    when you do GR system will take in PC
    But when u see in MMBE or MB52 system will show in Carton only

  • No alternative unit of measured specified.

    hi gurus,
    i received a information messaging while doing the confirmation of the process order. the information message is "no alternative unit of measure specified".
    i would like to know if where can i see the wrong file that triggers the information message "' no alternative unit of measure specified..
    your help is highly appreciated

    Hi
    Sorry for the Previous reply
    Error code is MM108
    Text
    No alternative unit of measure specified
    Diagnosis
    You want the system to convert from the base unit of measure to an alternative unit of measure for the current material. However, this alternative unit of measure is missing.
    System Response
    The system cannot carry out the conversion.
    Procedure
    This is due to a program error that should not occur. Please contact your system(s) administrator.
    Solution
    Pl refer SAP Note : 150221
    Regards
    Brahmaji

  • Creation of Inspection lot in Alternative Unit of measure

    Dear Guru,
    Our implementation is going on in a Tube manufacturing company where Base Unit is maintain  in KG & 100 % visual inspection is taken place & we accept or reject tube on Pieces. So how can we do this in SAP, Because in SAP Inspection Lot is created on Base Unit & UD (Stock Movement) also in base unit, How can we in corporate Alternative Unit of measure.

    Hi,
          1. give unit of conversion in MM basic data (Unit of measurement) say 1 kg = 10 pieces
           2. add unit of issue as a Pieces in MM QM view
            3. add in inspection paln Unit of measure as Pieces ( if possible )
    Now during stock posting  post the stock KG  and now see in stock MMBE by changing the UOm as a pieces you will get the stock in pieces and you can now issue the material in pieces too.
    Experts pl guide if i am wrong anywhere

  • No alternative unit of measure specified, during creation  of sales order

    Dear Experts,
    when user is creating sales order, User is getting the error message no.  MM108  "No alternative unit of measure specified" for particular material.
    we have checked the alternative unit of measure it is already maintiained in the material master.
    we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
    can you provide  the exact reason and solution to over come this please  .
    Thanks in advance.
    Regards,
    Suresh Veerepalli

    Dear Experts,
    The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
    X                  AUn               Measuremt unit text           Y                   BUn               Measuremt unit text 
    1     L     l     <=>     1     L     l
    1.121     KG     kg     <=>     1.000     L     l
    1     PCE     Piece     <=>     1     L     l
    1     BDL     Bundle     <=>     12     L     l
    1     PAL     Pallet     <=>     720     L     l
    Error is gettting when creation of Sales Order ,Order is standard order.
    When we double click on error message  the following details are shown.
    1.No alternative unit of measure specified
    message no:MM108
    2.Diagnosis:
       This alternative unit of measure is missing.
    3.System response :
       The system cannot carry out conversion
    4.Prodedure:
      This is due to Program error that should not occur.
    Please provide the exact solution on this issuse.
    Thanks

  • Cheque for Payment skipping Confirmation Screen

    Hi Experts,
    When I print cheques (created by payment wizard), it prints and gives the next cheque number which is fine, however I don't get the Confirmation Screen and soon after I get the error message 'No matching records found 'Cheques for payment' (OCHO) (ODBC -2028)
    I had checked forums link Problem in Check Number Configuration and sap note 1059752 which does nto resolve the issue.
    Any help will be appreciated. The client is on 8.8 PL16
    regards
    Johnson

    Hi Manish,
    Yes, I am able to open the check for payment window manually and in the option credited GL Account , i found account is listed.
    And also i done all setting in house bank setup as per SAP note 1059752.
    Banking -
    > check number confirmation
    check number confirmation - Selection criteria  -
    > Window open
    After data is put and enter
    Error message is display "No matching records found 'Cheques for payment' (OCHO) (ODBC -2028) [ Message 131-183 ] ..
    Till not resolve .
    Regards
    Vinod G

  • In Material replication alternative Unit not replcated to SRM

    Hi Experts,
    We have a issue in SRM 7.0. We have replicated some products from ERP to SRM, for some material Alternative unit is replicated and we can use that UOM for creation contracts and SC. But for some materials this alternative unit is not replicated. When we made changes to these materials, replication failed in Bdocs with Below Error.
    1.Order unit T is not assigned to this product(For some materials already this Unit got replicated)
    2. Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.
    Please help me to find out the issue.
    Thanks in Advance,
    BR,
    Basu

    Hi,
    This is because the Log system entry in your ECC system has been changed after the first time it was setup.
    Kindly refer note 765018 to resolve your error.
    Regards,
    Nikhil

  • Alternative Units by Plant

    Hello Everyone!!!!
    Is there any way to maintain alternative unit of measurements for a material by plant? i cannot maintain on the company code level because each of our manufacturing plant handles the product differently. One plant might have 50 products in a box and other 45 in a box.

    Hi Vicky,
    Jurgen is right.
    I can suggest that you tackle it a bit differently; define at client level additional units, like this:
    In plant A a BOX is 50 pieces - call it UOM BXA (standing for box in plant A)
    In plant B a BOX is 45 pieces - call it UOM BXB
    This way you can have all the different alternative units of measure for the varous plants and situations defined.
    Hope that this helps,
    Mario

  • Sales Information System (SIS) Reporting- Alternative Units of Measure

    Guys,
    Does anyone know how can we view SIS Reports (either using Standard or Flexible Analysis) in Alternative Units of Measure? Currently, all the quantities (example Order Quantity) are displayed in Base Unit of Measure .
    Thanks a Lot

    Hai john ,
          If i copy the mc.1 to make -Z report in this how can i view the stock in alternative units  as Kgs..But in master datas we maitained as BUM-Nos . For the same material master we are maitaining in additional datas as 1000 nos =40 kgs, if i take the report system will calculate the current stock with the AUM as kgs .for this pls suggest ie have 1000 nos stock if i choose AUM it should shows as 40 Kgs  .How to make program for calculating formulas.PLs  reply me asap
    Thanks in advance
    viswa

  • Tax and amount total should show in the line item of confirmation screen

    Hi All,
    I need to add the Tax and amount total fields in the line item of confirmation screen for service cart.
    Could someone please tell me how and where should I add and write the neccessary logic for that.
    We are on version SRM 3.0.
    Thanks,
    Kumar

    Hi,
    Please check the foll note for addition of custom fields:
    458591 - User-defined fields: Preparation and use
    672960 - User-defined fields 2
    To change the field content you need to implement the badi BBP_DOC_CHANGE_BADI .
    Here is the sample code for BBP_DOC_CHANGE_BADI Implementation
    loop at et_item into ls_item.
    move ls_item-mfrpn to ls_item-zz_your_new_field.
    modify et_item from ls_item transporting zz_your_new_field.
    endloop.
    BR,
    Disha.
    Pls reward points for useful answers.

  • Adding Alternative Unit of Measure to Outbound idoc

    Hi gurus,
    I need to add alternative unit of measure information to an outbound ORDERS idoc for each line item segment. How do I know what segments and qualifiers to use?
    Thanks!
    Will

    Hi  Will
    Unit of measure at item level is in
    Segment --> E1EDP01 : IDoc: Document Item General Data
    Field -->  MENEE : Unit of measure
    Do you want to convert the Unit of measure in outbound idoc?
    Use conversion rules for this...
    or
    do  you want send  Unit of measure  and secondary unit of measure ??
    extend the idoc type and write user exit to populate date in extended segment...
    i hope above info helps you
    Thanks
    RAMESH

  • Adding Alternative Unit of measure as part of  attributte of material

    Hi gurus,
    In our source system each material has alternative unit of measure which contain info on converting the base unit of measure (CAR) to MT and PAL.
    I need to add this info as part of material attribute
    e.g.
    Material "A" 10CART = 1 PAL & 100CART = 1MT
    This information captured in MM table "MARM" with material code as the
    As part of 0MATERIAL_ATTR , i need to have additional field that capture the info as below
    CARTPAL = 0.1 (1/10)
    CARTMT = 0.01 (1/100)
    Please help to advice on how to enhance the extractor to cater the above requirement.
    Your help highly appreciated
    Thank you

    hi,
    According to me you can enhance the 0Material_attr to bring the required information from ECC.
    But before enhancing anything ask func consultant or business below ques.
    1) will these unit entry will get created in MARM for any material at the creation of material or it will get updated later on
    2) will this unit value get change for any material during its entire life
    If any of above que ans is yes then how wud u manage in transaction data if unit get changed.
    For that u need to apply feedback concept in transaction dso.
    Regards,
    Ashish

  • Adding alternative unit of measure field in Internal Goods/services link

    Hi Experts,
    I have a requirement to display an Alternative unit of measure in the Add Internal Goods and services link of ADD ITEM tab in Shopping Cart which comes when user clicks the product id hyperlink of  INTERNAL/GOODS AND SERVICES.The Alternative unit should be displayed beside the field Quantity unit .
    If anyone has worked on this, Could you kindly help me out on how to proceed further ?
    Thanks in advance,
    umabalam.

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Alternative unit of Measure for variant material

    Dear All,
    Here is an interesting scenario,
    There is a naterial Billet with two variant characteristics length and size. and base unit of measure is TON. Now alternative unit of measure is PCS.  How can define the conversion factor on the basis of these two variant characteristics.
    In normal material (without variant char.)
    we can define conversion factor 1PCS= 2TON
    For variant material,
    For the material Billet with variant charc length and size how can i define conversion
    so that system calculates diff. PCS with diff. length and size but material is same. So how can i Do that.
    for example for same material Billet but variant char. Length is 6 M and size is 120*120 ,its wt will be 2 TON for 1 PCS.
    for the same material Billet with variant char. length 12 M and size 120*120, its wt will be 12TON for 1 PCS.
    How can i cater this for the same material.

    Hi Shoaib,
    We have faced the similar scenario for steel industry. Based on my experience, it is not possible to define variable values for Alternative UOM conversion with the variant characteristic/configuration, specially if you want SAP to maintain inventory with variable conversion rate.
    Use the Batch specific unit of measure for this situation.
    1) Create batch specific UOM i.e. Ton_per_pc (TOP) --- User proportional unit conversion
    2) Create batch characteristic ton_per_pc and assigned UOm.
    3) In material master additonal data select proportion unit and enter the standard conversion rate between ton & pcs.
    4) While doing GR - In batch creation you can enter whatever the conversion rate is and Inventory will be updated accordingly.
    Regards,
    Ravi.

Maybe you are looking for

  • How to connect imac to tv using thunderbolt to hdmi cable

    I'm trying to connect my mid 2011 iMac to my tv. I have a thunderbolt to hdmi cable that I purchased. I connected the thunderbolt port to the iMac and connected the hdmi port to the tv. I turned on both devices and the tv is not getting the signal. W

  • Manual creation of PPDS PPM in SCC03

    Hello Experts We are currently in process of experimenting PPDS PPM, since we have multiple components to sourced and produced from subcontractor. I need a step by step instruction of how to create manual PPDS PPM. I did tried SCC03 and create Activi

  • My Ipad is stuck in zoom on the home screen.

      It won't turn off (though it will sleep), and triple tapping with 3 fingers, and tripple taping the home button rappidly won't work.  Please help

  • Pass the value of the current case in a case structure to a global variable for use in VIs.

    I have built a large queued state machine (>100 cases).  In each state, I run a VI that I have created.  These VIs are usually not very different from one another.  In many cases, I could simply use the same VI over and over again.  There is only one

  • How to use table name dynamically in report  procedure

    Hello every body I want to use table name dynamically means at runtime i want to pass table name. I can do this by lexical parameter in main query. But my problem is that i want to crate new format trigger or new function that use 1 cursor in which t