Alternative UOM in product overview(/n/sapapo/pov1)

Hi,
In the product overview,we can see the product quantities in base UOM. our requirement is,we have to see Alternative UOM.
How to get this?
Thanks & Regards
Akthar

Dear Akthar,
you can define in /sapapo/mat1on ATB tab a "Display Unit". Here you can choose your alternative UOM and then while displaying the quantites your Alternative UOM will be used.
On PP/DS area if you want to use a particular unit of measure for certain products that is different to the base unit of measure, you must have maintained a production unit in the product master. Choose Master Data -> Product. You can maintain a production unit on the PP/DS tab page in the Units of Measure group frame.
For further help please read following link:
http://help.sap.com/saphelp_scm2007/helpdata/en/8f/5b507e5c91e748acbe37cc185a34ef/content.htm
Regards,
TIbor

Similar Messages

  • APO SNP Planning Book Show Product View alternative UoM

    Hi,
    I have a base UoM of BTL and an alternative UoM of CAS.
    I can change/save in my users settings the in transactions /SAPAPO/RRP3 (Product View) and /SAPAPO/SDP94 (Planning Book) to show the alternative UoM CAS as default.
    The problem I have is when I enter the Planning Book, load a product, right click on the product (in Selected Objects), select Show Product View and then look at the stock tab, this always shows as the base UoM BTL.  Can this be saved to show the alternative UoM CAS?

    Hi Linda,
    Try changing you user settings for a product in RRP3 Screen.
    Page Menu --> Settings -->General Tab -->General Panel -->enter AUOM value (CAS in your case).
    Note - The conversion only takes place for the products, for which the alternative unit of measure entered is also entered as the alternative unit of measure in the product master, or for the products, for which the base unit of measure has the same dimension as the alternative unit of measure.
    Caution: Test it , how its affecting for other products which doesnt have CAS as AUOM.
    All products which have BUOM as BTL will be changed to CAS when AUOM is maintained for them in product master.
    Thanks
    Vinoth

  • Subversion 1.7 support, as written in the product overview?

    Hello,
    I read about Subversion 1.7 support on Dreamweaver CS 5.5 product overview. ( http://www.adobe.com/aboutadobe/pressroom/pressmaterials/pdfs/cs55_dreamweaver_whatsnew.pd f )
    Some documents state 1.6.9 but I think 1.7 should be in the recent DW.  I've downloaded and tried CS 5.5, however the library version is still 1.6.9. Tried a clean checkout from the local 1.7.0 Subversion Edge Server using Dreamweaver CS 5.5 with no success.
    + The test on the setup dialog succeeds ("the server and project are accessible!").
    + I can browse the repo in the file window.
    + I can see the revisions, and open a repo file using the 'view' button on the revision history dialog.
    When I try to initially checkout the empty working folder I get : "file activity failed!". The saved log file states:
    SVN: #0, Path 'http://xxxx:80/svn/xxxxxx/trunk/www' is not canonicalized; there is a problem with the client.
    File activity complete.
    PS: I also have Tortoise 1.7.1 installed, but the problematic checkout was to a new clean folder, not touched by Tortoise.
    So what's wrong?
    If I sacrifice Tortoise, can I make DW work with the local subversion edge server by just uninstalling Tortoise?
    Thank you.

    Carey,
    You guys at Adobe are really screwing us over. On Nov 2, 2011 5:53 PM you replied DarkwingDuck and said you'd alert the team to update that doc that Subversion Client Version 1.7 was incorrect. I just downloaded that doc for the first time today and it STILL has the 1.7 reference.
    Also, when I was researching whether to move to CS6 for Dreamweaver one of the things I looked for was the subversion client. DW 5.5 said on the website that 1.7 was supported and in the initial DW6 material it also stated support for 1.7.
    So my question is how long can it take for you guys to "correct" information you are providing to developers who are trying to make these decisions? I already upgraded some of my repositories to 1.7 in prep for moving to DW 6. Now that it doesn't work (nevermind the fact that this breaks the workflow I was hopeing to benefit from) I have to back those repositories back down to 1.6.9 if I want to make it work and if I do that I won't be able to use the other tools used by other developers using SmartSVN 7 and the 1.7 client version.
    Why can't the DW product be updated to add support for 1.7 and Git and Mercurial? Seems like a natural fit for a "professional" IDE tool that costs significantly more than alternatives like Aptana etc.Please add support for 1.7 at least so that your docs may be correct. Or at a minimum fix your docs. I will submit a request as you describe above but I doubt it will help at all.

  • Using Alternative UOM in transaction VA21

    We want to use alternative UOM for Hydrocarbon Product during creation of a quotation using transaction VA21 and document type QT so that user can change the Alternative UOM say in KG or L15 or change the temperature and density of the material.
    Grateful if anyone provides a solution.

    Hi!
    Please solve:
    In Material Master for material HSD02, Base UOM is L15 and Sales Unit is KL.
    Earlier in Additional Data, 1 KL <= 1000 L15 is stored.
    Now I want to chage the conversion factor as 1 KL <= 987.9 L15 or 10 KL <= 9879 L15.
    Hence I wanted to delete the earlier entry with 1 KL <= 1000 L15  and tried to maintain 10 KL <= 9879 L15.
    This is not allowed. On saving the change again earlier entry 1 KL <= 1000 L15 appears in Additional Data -> Unit of Measure.
    Thanks in anticipation.
    Pranjal

  • Report for material and alternative UOM

    Hi Guru's
    is there ant transaction/standard report where i can see the list of materials and alternative UOM
    Thankyou

    Hi,
    No such standard report available in SAP to see for many materials. in MM03 under Additional Data, you can see but material wise.
    Better use table MARM to see the same and create an ABAP Query of Report using this table.

  • Change of UOM in Product Master with outstanding documents.

    Hi all,
    SRM allows the change of base UOM for product master even though there is outstanding document  using that particular product master. Shouldn't it be the case whereby change of base UOM for product master is not allowed if there is outstanding documents?
    Furthermore, I did a document check for the outstanding document and no error/warning message complaining that UOM in document does not match UOM as defined in product master. Any idea if this is correct?
    Thanks.

    hello weishan
    i will check once again from my side and let you know shortly.
    if you could change UOM in SRM master data , then it may not sync with ECC.
    i think best practice master data change in source system and synchronise with srm system.
    regards
    muthu

  • Stock report in alternative UoM

    Hi we are maintaining the stock of our FG in PCs as a base UoM . But our sales and distribution dept needs a sotck in alternative UoMs also
    Eg 10 Pc = 1 Box , and 120 Box = 1 Case likewise
    They needs the stock in Boxes and cases also
    I have maintained conversion in Material Master , but I do not find any report which shows me these alternative UoMs
    Please tell me is there any such report available

    Hi Bhushan,
    You will have to go in for Z report. In MB51 you can see only by movement type & also Unit of Entry & Base UoM.
    In MMBE per material, you can change the UoM & see the stocks, but this will be material by material & not for a range of materials.
    Read the data from MARD, MARM tables & also if you're maintaining special stocks, refer to MSPR, MCHB etc.
    Hope the above helps.
    Regards,
    Vivek

  • Mass deletion of alternative UOM conversion

    Hi Colleagues,
    Does anybody knows is there an easy way for mass-deletion of alternative unit of measure conversion rules in material master?
    Thanks,
    Artashes

    I did the following way:
    1. created a recording which always deletes the second line in Additional data-> uom conversions.
    2. by multiply running this recording via lsmw will delete all uoms.
    3. I was not able to do it at once as different materials has different numbers of alternative uom entered.
    Thanks,
    question closed.

  • Planing in COPA in alternative UoM

    Hi all,
    a question : Is it possible to plan in COPA in alternative UoM.The stock keeping unit is EA, but unfortunately the planning department wants to plan in KG. Conversion between the UoM's  is maintained in Material master.The project itself is a roll-out and COPA is pre-configured. There is 2 value fields in the operating concern that can store the data for volume in those two UoM
    Also I saw in TC KEDR , that a step" Clear " is customized to clear all the postings in the value field where KG volumes are posted.From conditions there i remove the our company code, but w/o any success. Whatever I have posted to the KG value field without any conversion is moved / reposted in value field for EA.
    Can you help me with this.
    Thank you for your time.

    Hi Maria
    In my opinion, you should not remove the entry of your company code from KEDR
    In the conditions, you should put condition as "BUKRS <> XXXX", where XXXX = your company code... This means, the derivation step will run only if the company code is Not Equal to Your company code
    Regards
    Ajay M

  • Alternate UoM for Production

    Dear All,
    I have maintained alternate UoM for Production in material master work scheduling view.
    The ratio is 1000 KG (Production Unit) : 1 EA (Base Unit). Before starting the production the weight estimate is 980 KG for a particular production order, but Base unit remains as 1EA. So in Production order the moment I make the Production amount as 980KG it is changing the Base unit quantity to 0.98 EA. I have different production orders where the ratio becomes different. Somewhere it might be 980Kg and somewhere it becomes 1020KG.
    I cannot change the UoM in material master everytime. Please suggest how to resolve this.
    Thanks
    Geravine

    Hi!,
    For this scenario you need to implement batch specific unit of measure where you can change the wieght of each produced batch while keeping the base unit value same. Here system will ask for conversion factor for the recieved batch at the time of GR. So you can store for example, one batch with relation 1 EA = 980 KG while the other as 1 EA = 990 KG.
    Please refer following link for further details:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
    Please revert back in case of any further issue.
    Regards,
    Uday

  • Why should we turn off query cache when alternative UOM solution is used?

    Hi, all, Why should we turn off query cache when alternative UOM solution is used?I found it in "Checklist for Query Performance", but I dont know why.
    Please tell me if u know.
    PS: I also dont know how to turn off the cache, Need your help, thanks!

    hi ,
           I have also some confusion regarding Cache Parameters . What is the importance of cache ,  Should we delete the cache memory time to time for each query ? I have chked it in RSRT but never use the chache monitor function .

  • Alternative UoM in HU monitor screen

    Hi Expert,
    I have a problem regarding the Alternative UoM in Handling Unit monitor screen (HUMO).
    We use alternative UoM to manage the material in our plant. and all the material is in Handling Unit management. for example, 1bag = 13kg.  when we sale it in bag unit of measure.
    we can display  stock with different UoM with transaction LS26. but we can not display the material in UoM "bag" in HUMO transaction.
    SO the sale people need to calculate it manually and convert them to bag since we use HU manage it.
    Do anyone have the same situation?
    Thanks
    Rocky

    It is not possible to view alternate UOM in HUMO,another option to see th HU stock in location MMBE by giving alternate UOM.
    For end user to see the stock alternative UOM then you need to write aABAP query to put some logic to show alternative UOM qty or develop a new report.

  • Rounding OF alternative UOM

    Dear All,
    I have maintained alternative UOM in material master which I am using in pricing procedure through info records.
    In the pricing if my value is coming 243000 I want to make it round off 25000.
    Tell me hw it is possible thr routine or thr some customisation.
    Regards
    GITESH

    Jeyakanthan A  ,
    Thanks for ur reply.
    I cant adust alternative UOM
    I should come round off Tell me can I use routin here for calculation of condition base vlue .
    regards
    Gitesh

  • Sample Quantity to be in alternative Uom

    Dear QM Gurus,
    We have a material which has basic uom as KG. We will be maintaining the alternative uom as PCS and conversion factor as 1KG = 1330 PCS in Material master. Now we want sample quantity in the inspection lot to be created in alternative uom instead of basic uom. Already we maintained PCS in inspection plan header level & MIC. But still the sample quantity is coming in KG.
    Kindly guide me to solve this issue.

    Refer
    Sample size to maintain in gram when base qty in Tons

  • UOM and Alternative UOM

    Hi All,
      Please clarify this, is the UOM is based on Material type if it is then we have to find UOM and alternative UOM based on material type.
    Regards,
    Babu

    UOM is the base unit of measure which exists in Basic view of material. This is the least possible unit defined for a material. FOr example Piece PC or ST
    Alternative unit of measures are the other unit of measures used in different views of material master. Issue unit, order unit or Sales unit....We have to maintain the conversion of these Alternate UOM's and Uom's in MM01 or MM02. Material UOM's are stored in MARM table.
    Alternate UOM could be BAG or PAC or CS (case)...
    Conversions are like BAG = 10 PC where PC is the base unit of measure and BAG is the alternate unit of measure.
    -Kriss

Maybe you are looking for