Alternative ways of increasing volume in Nokia E71

I am having an issue with the volum up button to the side (the volum down works just fine). Is there and alterantive way to increase the phones volume (when playing music). I cant seem to find the setting to do that. 

@hithere2233
there is no in built settings available to assign any different key to volum up key
so i suggest you to send your phone for repair
for temporary solution there is an app called "magic key" using that you can assign different key to that key
using this two tutorials you can do that
http://www.symbian-guru.com/welcome/2008/12/make-full-use-of-the-volume-mute-keys-on-the-e71.html
http://www.symbian-guru.com/welcome/2008/06/how-to-kill-the-gallery-button.html

Similar Messages

  • Best way to increase volume by steps

    Hello,
    I have a freaky problem with my mobile phone, a k800i and the wake up alarm: I made an analysis with Adobe Audition 3 with a simple tone, and I saw that the alarm lasts 60 seconds no matter how long is the mp3 I use to wake me up. You can look at the attached file here.
    In fact, the tone starts with 0 db, increasing each 1.79 seconds by 2.1 db, in 17 steps and then the db level remains the same until the sound stops. The result is that at first, I cannot hear the first seconds for the selected mp3, and at the final seconds the volume is too high.
    So i decided to use Audition to prepare some of the best 60 seconds for my favourite songs (I said it was very-very freak).
    But of course, I don't want to do it manually for every file and every step as I would look like a perfect dumb , isn't it ? haha !
    Do you know some procedure to automate this ?
    You could think like "hey, this dude has lots of time to waste", but believe me, I don't. This is like an odd "scape from the real world" trial...
    Thanks in advance !
    Roger

    Open and edit the file you want.
    In Edit View, go to Effects>Amplitude and Compression>Envelope.
    Create a volume envelope for the length you want.
    Apply it to your waveform.
    When you are happy with the settings of the envelope, save that volume envelope as a preset.
    Simply apply the preset to every waveform you want.

  • IS THERE A WAY OF INCREASING THE VOLUME ON A USB DOWNLOADED WITH I TUNES? WHEN I PLAY MUSIC FROM IT IN MY BMW IT IS NOT VERY LOUD.

    IS THERE A WAY OF INCREASING THE VOLUME ON A THUMB DRIVE DOWNLOADED WITH ITUNES MUSIC? WHEN PLAYBACK ON BMW RADIO, EVEN WITH THE RADIO VOLUME AT MAX, MUSIC IS NOT VERY LOUD.

    Can't answer the query, since I don't use thumb drives and my volume's very responsive. That said, please don't post using ALL CAPS. That's considered shouting and is very disconcerting.

  • Speaker volume too low on 3GS - any way to increase it?

    The speaker volume is too low on my IPhone 3GS. Other than the volume control is there any other way to increase it?

    With volume control do you mean the buttons on the side of the phone? or in settings? When playing something on speaker and i want it louder, I just click the up button on the side of the phone.

  • Nokia Lumia 520 - Alternative way of locking/unloc...

    Hello!
    I've got Nokia Lumia 520 before a week and overall the phone seems really good for my needs, but I found yesterday that the only way to lock/unlock the screen is by using the Power button every time.
    My question is: Is there an alternative way of doing this like for example double tapping the touchscreen or by some app that can perform such function?
    Thanks!

    The 52x hardware does not support the Glace screen functionality. I would guess that in sleep mode the used screen has no power thus would not sense the tap or be able to display the clock. It's a budget phone for a reason..
    That said, pressing the power button is the only  action to wake up the phone..
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Siri volume seems low - any way to increase it?

    I just got a new iPhone 5 today and am trying Siri for the first time. It seems to work ok, but the volume of Siri's voice seems quite low to me.
    The speakers on the iPhone 5 itself are ok because I can play music in iTunes very loudly, so it's not the general volume settings or the speakers. It seems to be just Siri's voice.
    Is there any way to increase Siri's voice volume?
    Thanks,
    doug

    Never mind. I see. Siri simply has it's own volume and you can adjust it while in Siri itself. It was set low by default.
    doug

  • What is the best way to increase the volume for the phone?  My Dad has a hearing aid and could use more volume.

    What is the best way to increase the volume for the phone?  My Dad has a hearing aid and could use more volume.

    https://itunes.apple.com/gb/app/hearyounow-your-personal-sound/id569522474?mt=8
    Have a look here and in particular
    "Customers also bought "

  • Is there a way to increase the volume on the mini? Are there speakers you can attach?

    Is there a way to increase the volume on the mini? Are there speakers you can attach?

    I get this:

  • [SOLVED] Increase volume in a linear instead of logarithmic way

    I am using i3. I have some keybindings which are executing "amixer set Master
    5%+". Unfortunately, if I am regarding alsamixer meanwhile, the volume is
    increasing logarithmically. Hence I have a higher resolution on the lower volume
    area than on the higher.
    Is there a way to increase it linearly?
    Regards
    Manuel
    Last edited by manuelschneid3r (2013-07-20 18:07:51)

    You can use "amixer set Master 5%+ -M":
    -M Use the mapped volume for evaluating the percentage rep‐
    resentation like alsamixer, to be more natural for human
    ear.
    - edit: Yeah, that's exactly what has been posted in the thread linked above.
    Last edited by Vain (2013-07-20 14:19:04)

  • My loudspeaker are very low (switched to max) any way to increase the volume. (IPad 1)?

    are very low (switched to max) any way to increase the volume. (IPad 1)?    [email protected] 

    Never mind. I see. Siri simply has it's own volume and you can adjust it while in Siri itself. It was set low by default.
    doug

  • I have adjusted the settings to max and the volume button on the side to max, is there any other way to increase ringtone volume?

    I have adjusted the settings to max and the volume button on the side to max, is there any other way to increase ringtone volume?

    you can connect an amplifier to the 3.5mm minijack but it will require batteries or AC power to amplify of cause

  • Increase volume of rented iTunes movies?

    I have difficulty with the volume level being too low on rented iTunes movies.  I have tried the following setups with my first generation iPad:
    1) Apple HDMI adapter -> HDMI cable to Mitsubishi EW230U-ST projector; Creative T-40 speakers plugged into mini-stereo jack of projector; volume turned to max on all devices.  This produces speaker volume that is not adequate for a large room.
    2) Same as #1, but instead run the Creative speakers directly from the headphone jack of the iPad.  Volume similarly inadequate.
    3) Same as #1 or #2, but insert FiiO E5 Headphone Amplifier into mini-stereo chain going to Creative T-40 speakers.  This produces adequate volume, though to my ears, the quality is diminished somewhat.  I'm not fond on this approach, because the FiiO uses a built-in battery which might fail without warning during the showing of a movie.
    What would be ideal would be a way to increase the volume going out the headphone jack of the iPad.  I understand that this is deliberately limited to protect the hearing of those using headphones.  Alternatively, increasing the volume going over HDMI would likely help - unless the projector's mini-stereo jack is similarly being limited for headphone reasons (less likely, since projectors are usually hooked to external speakers).
    So ... is there any way to make the iPad output louder sound with rented movies?  Jail-breaking solutions are probably not appropriate, as I don't want to risk my ATT unlimited data plan.
    I should say that if I just play a DVD instead of using the iPad, the sound level from the DVD player's stereo jack is strong enough for the Creative T-40 speakers to rock the room.
    If I could solve this problem, I would rent a lot more iTunes movies, as it is the easiest way to get a movie.

    I followed your procedure and did some testing.  By setting the volume slider to +100%, the movie was louder on my Mac.
    I then transferred the movie to my iPad and took my equipment to the facility where I play movies. I didn't have a pristine rental copy to test against, so I used my own DVD copy of the movie.  This is what I found:
    A) The best and strongest sound was when the the T40 speakers were directly connected to the DVD player's RCA sound jacks and the video was coming thru the hdmi to the projector.
    B) The worst (quietest) sound was when the speakers took their input from the mini-stereo jack of the projector, with the video and sound coming from the dvd player thru hdmi.
    C) I compared this with the +100% sound-increased movie rental running on my iPad, with hdmi connection to the projector and sound coming from the mini-stereo jack of the projector to the T40 speakers.  This was definitely much louder than "B" above.  So I can safely say that the sound boost performed on the rental movie on my Mac did copy over to the iPad.
    D) Unfortunately, even "C" above is not loud enough for this room.  But if I added the FiiO amp to "C", then there was plenty of sound - though not as pleasant (or simple) as "A" above.
    I wonder if there is some way to get more than the +100% sound boost in iTunes?
    I think it is unfortunate that renting a digital movie is fraught with such difficulty. It should be possible to adjust the sound as needed - and preferably on the iPad!  Otherwise, we are just going to keep renting DVDs.

  • Light sensitivity problem in nokia e71

    i cant take pictures from my e71 in low light........when captured it is almost dark....however by the use of flash it gets a bit brighter....is there any way to increase the light sensitivity? Help me

    If you believe  there is an issue with your phone that your can't address then  it maybe advisable to take it your local Nokia dealership and let them have a look.
    ^C
    If this post answers your question, you can help others by clicking the green accepted solution' button.
    Please ask your questions to the main board and not to my mailbox. Thank you.

  • Nokia E71 Calendar Memos across multiple days

    Hello,
    I recently got a German Nokia E71
    (E71-1 Software Version: 100.07.76 08-06-2008).
    I noticed a strange behavior of the calendar:
    When I create a memo that goes across multiple days (lets say 10 days or 14 days) In Month view the memo is shown correctly for the set time. Also when synchronizing with MS Outlook the memo is shown correctly on the PC.
    But when you open the Memo directly (open day view, select the memo and press the center of the nav-key) then the memo is displayed to last one day longer than originally specified.
    For example I created a memo that should end on the 11th of September (actually it starts in August so maybe spanning the Month barrier may also cause the problem) but it is shown to end on September 12th when I open it. Although it is shown correctly in Month view (shown on 11-Sept, not shown on 12-sept).
    Maybe you have similar experiences?
    Or an explanation for that behavior?
    Thanks and regards,
    Sebastian

    I think I'm experiencing the same thing, Sebastian.
    Phone: E71 bough from 3 in the UK ~20months ago.
    Firmware: 100.07.76 08-06-2008 RM-346 E71-1 (241.02)
    Here's how it happens:
    Step 1)  I create a memo on the calendar with the phone.
    Step 2)  I do an Ovi sync over the air (i.e. there is no use of the PC Suite or Microsoft Outlook going on).
    Step 3)  Some (but not all) of my single day memos are spread over two (2) days.
    How it should look when correct: http://tinyurl.com/ovi-cal-memo-right
    How it actually looks when wrong: http://tinyurl.com/ovi-cal-memo-wrong
    As you can see in the 'wrong' example, instead of memos showing up as lasting for 1 day duration it's apparently "23 hours, 59 minutes" in duration, and ends on 18/07/2011.  And yet it's spread over the 18th and 19th on the month view.  The correct date (as entered and displayed on my phone) is actually the 19th!  The same goes for all those other 'wrong 2-day memos': they should all only be shown on the second of the two day bar that's visible in month view.
    At the moment, for some unknown reason, the problem seems confined to April-October of this year (and subsequent and prior years) and dates are stretched back by a day so they appear on the web version of the Ovi calendar as lasting for two (2) days instead of one (1).  But I think that the problem has been more widespread and across-the-board in the past, and it may have put dates forward by an aditional day (although I can't be sure on that.
    Thankfully, all these memos remain as correct on the phone and seem to be unaffected by the sync.
    When it first happened I made an attempt to correct the Ovi Web Calendar memo sync problem before (thinking it was a once only bug) by going through all the Ovi calendar entries on the web interface and tidying things up that way.  But I'm not prepared to go through all that hassle again.
    It's a real niggle, to say the least.
    What can be done?
    Thanks for any help.
    Attachments:
    ovi-cal-memo-right.jpg ‏155 KB
    ovi-cal-memo-wrong.jpg ‏159 KB

  • Lack of My Folder support for Nokia E71, even in n...

    With my 6230i PC suite allowed me to see and manage folders and messages under My Folders. Now with my spanking new E71 it doesn't. Not only does it not let me manage them but I cannot even view their contents. This is not even supported with the latest Beta version of Nokia Communication Centre (Version 2.0). This is surely a major step backwards? Some problems
    - Messages on my 6230i under My folders did not restore to the E71 and I have found no way to get them across. The 6230i does not let me move them back to the Inbox.
    - Copy and paste between phones is not possible
    - If you right clicked Inbox in Nokia Communication Centre 1.0 a New folder option appeared. This did not work. The solution in the new version appears to be to remove the option altogether.

    HI,
    One option may be, you can copy the 6230i messages to the PC and then paste that in Nokia e71. Hope it may help you

Maybe you are looking for

  • Receivables - Invoices & CM's not closing after payment applied

    Hi - I have found that my A/R invoices (transactions) do not automatically close when a payment is applied in full. Is there something in setup to make this occur? Or is there a process that I need to run? My query for open transactions is bringing i

  • Cannot connect to database using SQL Developer

    Ok. Here are the facts: 1) I can connect to the database using PL/SQL Developer. 2) I wanted to try SQL Developer and I am unable to connect to the same database with SQL Developer. I provide username and password and select "network alias" and click

  • Activation question: Lightroom

    If I deactivate LR CC on my computer #1 so that I can activate it on computer #3 Will I be able to reactivate it on #1 whenever I want in the future (even multiple times) as long as I deactivate it on another computer so that I only have it on 2 at a

  • My videos are missing after downloading iso8

    after I downloaded ISO 8 onto my iPad, I no longer have a video album in my photos.  Does anyone know how I can find my videos?

  • Calculate data of last 30 days on basis of sys date

    SELECT DT, ITEMCODE, ITEMNAME, QTY FROM   TABLE1In above given query, how i could calculate the QTY details of last 30 days, APR, MAY, and JUNE As the current month is JULY, in AUG, the Qty details are required for last 30 days (from sysdate), MAY, J