[Alternatively Solved] Can't get the snd-bt-sco module ...

Hello
I'm trying to get my bluetooth stereo headset working ...
I need the snd-bt-sco module but the btsco package isn't in the community repo anymore (right ?).
So I made the btsco package from AUR but the only file present in the final package is "/usr/bin/btsco"...
Is there a way to get that module in order to make my headset work ?
Thanks a lot !
Last edited by Tib05 (2008-04-10 09:03:26)

I followed tomk's link. There, they say that plugz package can make a bluetooth headset work.
But on this website, there's a link to bluez's site to test the audio drivers that are built into bluez.
So, according that page, http://wiki.bluez.org/wiki/HOWTO/AudioDevices , I managed to make my headset work.
There are still some issues with my headset but I will open a new thread.
I flag the thread as alternatively solved
Thanks !

Similar Messages

[SOLVED] - Can't get the right Intel video driver to work!

Hi,
Just reinstalled my wifes Laptop. When she got to work this morning she had Windows XP, when she gets home shes gonna have Archlinux!
Anyway...
She has an old Toshiba laptop and I can't get the correct video driver so I can't fire up X.
lspci says VGA compatible controller: Intel Corportaion 82852/855GM Integrated Graphics Device (rev 02)
I have tried:
# xf86-video-i740 Intel i740 video driver
# xf86-video-i810 Intel i810/i830/i9xx video drivers (deprecated - use -intel)
# xf86-video-intel Newer Version of Intel i810/i830/i9xx video drivers
# xf86-video-intel-legacy Legacy-driver for older intel cards as 82865G (xf86-video-intel currently crashes with older cards) <--- not available any more?
# xf86-video-vesa vesa video driver
# xf86-video-vga VGA 16 color video driver
Xorg says:
(EE) Failed to load module "intel"
(EE) Failed to load module "i810"
(EE) Failed to load module "vesa"
(EE) Failed to load module "fbdev"
I have tried to removed the drives between my tryouts by using:
# pacman -Rnsc xf86-video-<driver>
Running the newest Xorg without xorg.conf but have tried a few with xorg.conf (Xorg -configure) and even hwd -x and used both the vesa and intel output...
Any suggestions?
Last edited by ftornell (2009-05-28 21:14:48)

Driver was there now, I did a pacman -Syu first time after intsallation...
Case closed!

How can I get the Email Campaigns Blog module to display correctly in Outlook?

I'm having a bit of trouble with this. I've used the email campaign builder to build a campaign; added the blog module to it and applied a custom template to it so that it should display correctly, but outlook has other ideas...
Here's what it should look like:
and here's what outlook gives me:
this is built within tables and the tables and cells all have set widths of 520px, yet the blog module seems to ignore this and somehow sit outside of them, breaking the template (BUT only in outlook).
Is this a problem anyone has experienced before?
Any ideas on how to fix it?
Thanks
Sam

HTML Email Campaign design is still a very tricky beast. There are no standards like the makers of the major web browsers have been pushing for and adhering to over the years for web designers so since there are any number of email clients like your native mobile phone email clients, desktop clients like Outlook and Thunderbird and then web-based email clients like Gmail, Yahoo!, etc. there's no standard to display HTML in emails so each client does things differently.
Outlook and Gmail in the past have been the worst offenders. Fixing it is nothing simple. You need to go into your markup and make sure every table has a width set both in the inline STYLE attribute as well as the WIDTH attribute on the TABLE element.
Outlook 2007 and 2010 are both horrendous at displaying HTML uniformly- as it relies on the Microsoft Word rendering engine. Most of the time for my clients I tell them that if the end user can read and click links in Outlook then it's a win-- they're used to seeing horrible formatted emails no doubt. But, if you find most of your email list is using Outlook (corporate/enterprise customers) then you should keep tweaking it.
It's impossible to tell from screenshots what the issue is-- it's likely a markup issue if there is one.

When I try to print a photo downloaded from Facebook in iPhoto, I can't get the size I specify to print correctly. Example: 5x7 prints smaller than 5x7. What do I do to solve this problem?

When I try to print a photo downloaded from Facebook in iPhoto, I can't get the size I specify to print correctly. Example: 5x7 prints smaller than 5x7. What do I do to solve this problem?

Those pixel dimemsions have aspect ratios that are not the same as a 5 x7 print:
1360 x 1360 = 1.0
790 x 640 = 1.23
2048 x 1366 = 1.5
An 7 x 5 image = 1.4.
So you'll need to crop the images to 5 x 7 before printing. The first two images are a little light in the pixels to produce a high resolution 5 x 7 print.
Happy Holidays

SOLVED: Can't get CM 1015 printer to scan: where is the "HP Solution Center" ?

Hi,
I have a HP cm1015 printer.
Recently win8.1 was installed, and I had to reinstall the printer.
I downloaded drivers from the hp site, but I can't get the printer to scan.
It prints, and copies ok, but scanning doesn't work.
What is unclear:
If I go to the download driver page, I can download 4 different kind of drivers.
I can choose between :
Driver - Universal print Driver
- for windows PCL6
- For Windows Postscript
- for windows PLC5
Software - Universal Print driver
- HP Printer administrator resource kit.
I chose
- for windows PCL6
The "HP Printer administrator resource kit.": are all different files. Don't know what to do with it.
To scan I should be able to get into the "HP solution Center", according to the manual.
However, after downloading and installing the "windows PCL6" driver, I don't see that center on my PC.
So how do I get the HP solution center ?
Thx!
Solution: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03506225

Problem 1: HP Solution Cntr could not detect any devices and closed down
Solution??? I downloaded, uninstalled and re-installed the driver successfully.....but could not "add the device" in the last step even if I followed the instructions carefully: a) make sure device is powered on
b) connect USB cable
Per Control Panel, printer is "ready" but does not print.
Problem 2: My HP Solution Center disappeared. How do I re-establish connection?

I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
 public static void main( String[] args ) {
 JFrame f = new JFrame("JFrame");
 f.setSize( 500, 500 );
 ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
 buttonsArr.add( new JButton( "first" ) );
 buttonsArr.add( new JButton( "second" ) );
 buttonsArr.add( new JButton( "third" ) );
 MyListener myListener = new MyListener();
 ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
 ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
 ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
 JPanel panel = new JPanel();
 panel.add( buttonsArr.get( 0 ) );
 panel.add( buttonsArr.get( 1 ) );
 panel.add( buttonsArr.get( 2 ) );
 f.getContentPane().add( BorderLayout.CENTER, panel );
 f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
 f.setVisible( true );
 public static class MyListener implements ActionListener{
 public MyListener() {}
 public void actionPerformed( ActionEvent e ) {
 System.out.println( "hi!! " + e.getSource() );
 // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
If your location does’t have wifi to use with the Apple TV, use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
 Cheers, Tom

I can't remember my Apple ID password or my security question answers. When I try to reset my password it wants to send it to my e-mail address but I can't get the e-mail because I don't have security answers or the password. How do I reset password?

I can't remember my Apple ID password or my security question answers. When I try to reset my password it wants to send it to my e-mail address but I can't get the e-mail because I don't know my security answers or the password. How do I reset password?

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

I am using 3.6. How can I get the update to look just like this version? I truly don't want to use IE or MSN but if that is all I have, then let me know. Thanks

I am using 3.6 because I like how it spreads out my toolbars instead of just giving me the bookmarks in the corner and the lonesome firefox in the opposite corner. I know I can open the bookmark toolbar but it is not the same. I want the file, edit, view, history, bookmarks, tools, help toolbar across. How can I get the new firefox to do that

This should duplicate the image that you posted as your preferred appearance for Firefox 5 in the above (request to be LOCKED) duplicate thread.
'''Menu Bar''' 
*right-click empty space at the end of the Tab Bar, click "Menu Bar" to place a checkmark
*Menu Bar checked = Menu Bar on; Firefox button off
*Menu Bar un-checked = Menu Bar off; Firefox button on
*Other methods of doing the same:
**click Firefox button > Options, click Menu Bar
**Quick toggle Menu Bar on/off: ALT+V+T+M
'''Tabs on Top''' 
*right-click empty space at the end of the Tab Bar, click "Tabs on Top" to remove the checkmark
*Tabs on Top checked = Tabs above toolbars
*Tabs on Top un-checked = Tabs below toolbars
*Other methods of doing the same:
**click Firefox button > Options, click Tabs on Top
**Quick toggle Tabs on Top on/off: ALT+V+T+T
'''Separate Reload / Stop buttons and position of Home button''' 
*Open the Customize window; do one of the following:
**right-click the empty space at the end of the Tab bar, choose "Customize"
**click Firefox button > Options > Toolbar Layout
**if using the Menu Bar, click View > Toobars, click Customize
**Quick open Customize window: ATL+V+T+C
*the Reload and Stop buttons will be shown separate between the URL/Location bar and the Search Bar. While the Customize window is open, do one of the following, to keep the buttons separate:
**drag the Stop button to the left of the Reload button
**drag a "Space" between the Reload and Stop buttons
**drag one or both buttons anywhere on the Navigation bar separated by a "Space" or another icon or reverse the order to Stop-Reload to keep them separate
*drag the Home button to the right of the Search Bar
*click "Done" at the bottom right of the Customize window when finished.
'''Color Back/Forward, Home, Stop and Reload buttons''' 
*Install this add-on: https://addons.mozilla.org/en-US/firefox/addon/firefox-3-theme-for-firefox/
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]

TS1702 help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

Hi melbernai - not sure if you've solved this problem yet. I had the exact same problem recently with my 2nd Gen iPod Nano. I solved it yesterday by simply updating iTunes to the most recent version, after which I could get rid of the register screen. The only other thing I needed to do to add my custom playlists was select "Manually manage music" on the screen for my iPod, since it had been in an automatic synching mode since the problem occurred.

How can we get the value of the key field in a custom data model using governance API?

Dear Team,
How can we get the value of the key field in a custom data model, to be used for manipulation of the change request fields using governance API?
Any kind of help would be sincerely appreciated.
Thanks & Regards,
Tushar.

Hi Michael,
Thanks for direction. Let me give more context on this as I'm interested to get more details..One of the issue was to read cross entity field values on UI based on user action and set other entity field behaviour...It is similar to what is being posted here.
For ex: Reading MTART from Basic Data UIBB in MM MDG UI and set the field properties in some other custom entities say ZZETEST. This cannot be done using UI BADI as it only supports single entity at a time and not cross entity. So alternatively we found a solution where we can enhance existing PLMB feederclass cl_mdg_bs_mat_feeder_form by reading the model and the entity as needed as it it proved that it supports cross entity UI field behaviours and so business requirements.
This is a workaround for now.
So the question is How do we achive it using governance API for cross entity field behiaviours.?or what is the right way doing this.
Can we do that using governance API and its' methods?
In the Governance API doc you provided below has referring to below external model as part of gevernance API.
The active or inactive data (before or during the derivation or the check) can be read
with the external data model interface IF_USMD_MODEL_EXT with the method READ_CHAR_VALUE and
the corresponding READ_MODE parameter. To avoid unnecessary flushes (derivations), the NO_FLUSH
parameter should b
e set to ‘X’.
Thanks
Praveen

I just created a slide show with music and tried to export it to a thumb drive to play on another computer. File seemed too large and slow to export, so I deleted the music. Now, I can't get the music back on it and don't know what to do...

Can't export my slide show. Is the file too big? Tried to export without music. Now, can't get the music back into it.

If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

I can not get the right frequency out of my NI-DAQ 6062E card from Matlab

Hi.
My name is Johan and I want to generate an analog square waveform with 5.76 kb/s in frequency with my NI DAQCard-6062E from Matlab.
When I run in Matlab the program below, I get the frequency of 5.747 kb/s on the output channel (even thou I have chosen 5.76 kb/s). When I try to change the sample rate, to higher values in Matlab, I get the same frequency until I choose the sample rate to 5.79 kb/s. The output signal is in that case is 5.813 kb/s.
So my problem is that I can't get the exact frequency of 5.76 kb/s.
How do I solve this.
Thankful for help.
Best regards, Johan
Program in Matlab:
clear all
openDAQ=daqfind; %Detect any open DAQ channels
for i=1:length(openDAQ), %Close any open DAQ channels
stop(openDAQ(i));
end
ao = analogoutput('nidaq',1); %Create an object for analog output
addchannel(ao, [0 1]);
set(ao, 'SampleRate', 2*5760); %Here the sample rate is specied. 2*, because to get right samplerate
y=[80,-80] %Sets theoutput values to 80 and -80 (As -1 and 1)
putdata(ao, [y' y']); %Sends the values to out buffer
set(ao,'RepeatOutput',inf) %Repeats sending in infinity
set(ao, 'TriggerType', 'Immediate'); %Choose trigger to immediate, because sending values shall occur driect after start command.
start(ao);
%stop(ao)

Hello Johan!
Bad news I am afraid….
I assume you are using the Data Acquisition Toolbox from the Mathworks and when it comes to support on that interface I have to advice you to contact the Mathworks for assistance. We don't provide any support on their data acquisition interface since we have nothing to do with it.
Sorry for the inconvenience this might cause you.
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it

When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it?

The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

[Alternatively Solved] Can't get the snd-bt-sco module ...

Similar Messages

Maybe you are looking for