Although system requisites met, get error message "OS X Mavericks cannot be installed on this computer". Any ideas? MacBook Pro w/ Lion...

Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against the following, which are the earliest Macs of each type that can run Mountain Lion and Mavericks:
iMac7,1
MacBook5,1
MacBookPro3,1
MacBookAir2,1
Macmini3,1
MacPro3,1
Xserve3,1
(108637)

Similar Messages

How to reinstall Mac os x 10.5.6 to my imac desktop 24 inch all in one i put in disk and held c down and it came to a message saying os x cannot be installed on this computer HELP?

Ok here lately when i came into my office and go to cut on my imac desktop 24inch all in one it would come up to a white screen with a grey folder with a question mark blinking in the center of the screen well i just want to reload the machine but when i put my Mac os x install dvd that came with it into it you gets past the folder blinking to the screen where it has the Mac os x installer bar at the top but in the middle of the screen in says Mac os x cannot be installed on this computer and has two buttons one that says ok and the other that says restart how can i get this to stop giving me this error and get to where i can just reinstall the os PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!

I understand, while you may have knowledge with PCs you don't have the diagnostic tools available to you to professionaly diagnose a Mac. Apple does not make those tools available for the general public, they are only available to Apple and AASPs. To install the OS on the machine you need to locate the original 10.5.x install disc that shipped with the machine and insert it into the SuperDrive. Below are Apples instructions for setting up the machine:
Turn on the computer.
Insert the Mac OS X Install DVD into the optical drive, or insert the MacBook Air Software Reinstall Drive into the USB port.
Restart the computer.
Press and hold the "C" key while the computer starts up. The computer will start up using the Install media. Alternatively, press and hold the Option key at startup to select the volume containing the installer.
If your are using a wireless mouse, a mouse icon should appear asking you to turn the mouse on so that the computer can discover it.
Select a language, then press the right arrow key.
Click the Utilities menu, the choose Disk Utility.
Select a volume to erase (usually called Macintosh HD).
Click the Erase tab.
Click Erase... Important: This step will completely erase your hard drive. If you have installed Microsoft Windows using Boot Camp, or have multiple partitions, this procedure will erase the partition you select.
A dialog box appears asking if you want to erase the partition: click Erase.
After the partition is erased, choose Quit Disk Utility from the Disk Utility menu.
Part Two: Installing the operating system
When the Mac OS X Snow Leopard Installer screen appears, click Continue.
When the license agreement appears, click Agree.
Select the disk you erased. It should now be highlighted with a green arrow.
Click Install. A status bar appears on the bottom of the screen while Mac OS X installs.
An Additional Information screen appears, advising you that you operating system has been installed. Click Continue.
An Install Succeeded screen appears. Click Restart.
Part Three: Completing the Mac OS X Setup Assistant
When the restart has completed, a welcome video plays, then country/region selection screen appears.
Select your country or region and click Continue.
Select a keyboard layout and click Continue.
A migration screen appears. If you wish to migrate your data from another Macintosh, see Migration tips and tricks. If you do not wish to migrate, or want to migrate later, select "Do not transfer my information now" and click Continue.
A Wireless Service screen appears if you have wireless services available within range of your computer. Select "On" and click Continue.
If the network is password protected, you be asked for a password when you select it. Type the password and click Continue.
An Apple ID screen appears. This is used to purchase content from the iTunes store. When complete, click Continue.
If you do not have an Apple ID, click Continue to move to the next screen.
A Registration Information screen appears. You are not required to fill this out, but it is helpful if you do. When complete, click Continue and your product registration will be sent immediately.
If Mac OS X servers are available on your network, you'll be asked if you'd like to log on to them. If not, click Continue.
A Create Your Account screen appears. This will be used to create a User Account with Login ID and Password for you computer. You should remember this password. You'll be asked for it when you install new software or perform other administrative tasks on your computer. When complete, click Continue and your account will be created immediately.
A screen to select your user picture appears. Take a snapshot with the built-in camera or select a picture from your Library. When complete, click Continue.
A MobileMe screen appears. Select an option and click Continue.
A Thank You screen appears. Click Go to complete the Mac OS X Setup Assistant.
Eject the Mac OS X Install DVD by dragging its icon to the Trash.
Good luck.

Installing cs6 on a new laptop, I get error message "Adobe application manager failed to install"

installing cs6 on a new laptop, I get error message "Adobe application manager failed to install"
Is this because I need to deactivate cs5 on one of the computers?
CS5 is on 2 old computers. I used Migration Assistant to migrate the applications to the new laptop which is a 3rd computer.
What do I need to do?

I used Migration Assistant to migrate the applications to the new laptop which is a 3rd computer.
Forget that part. The apps won't work. Adobe apps must be installed properly. That may well explain your issues with CS6, too. Generalyl, though, there is no need to uninstall older versions...
Mylenium

"OSX Maveracks cannot be installed on this computer" is the message tht I get when I try to download Maveracks. I have Snow Leopard 10.6.8 installed, 167 gb free space and 3 gb of memory. What would keep it from loading?

"OSX Mavericks cannot be installed on this computer" is the message that I receive when trying to download Maveracks. I have a late 2007 iMac with Snow Leopard 10.6.8 installed, 167gb free space and 3 gb memory. What are reasons that it won't download?

Does your computer meet the requirements listed below?
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)

I cannot transfer my Ical on my Imac with Mavericks 10.9.2 to my iphone 4 with the latest operating system. I get error message "403" when it attempts to upload to the cloud before transfering to the iphone. Any advice would be greatly appreciated.

I cannot transfer my Ical on my Imac with Mavericks 10.9.2 to my iphone 4 with the latest operating system. I get error message "403" when it attempts to upload to the cloud before transfering to the iphone. I've tried shutting down the computer and iphone but it has not been successful. There is plenty of data available on the icloud as I've not used it for anything else. Any advice would be greatly appreciated. Thank you.
Kevin

Hello kmcnern3,
Thank you for providing the details of the calendar issue you are experiencing with your iMac and iPhone. I recommend following the steps in the section titled "Troubleshooting on OS X" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

My daughter has a 2002 intel running Tiger and I want to update it to Snow Leopard. I get an error message that OSX can't be installed on this system. Please help!!! Thanks

Hi,
I'm having a really hard time here.
I want to update my daughters intel from Tiger to Snow Leopard for her to make her life (and mine) easier.
When I try install the OS, I keep getting an error message that OSX can't be installed on this Mac.
What's going on?
Never had so much trouble before.
Please help.
Thanks so much

You're welcome. Please note that it is a little more difficult to obtain Snow Leopard these days. Please see the post by Kappy at the link below.
https://discussions.apple.com/thread/4164689?start=0&tstart=0

HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

HT4097 Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help

Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help.
I'm running 4.3.3 on a ipad 2 im computer is connected via wire to internet

See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

When I try to sync or update my iPhone4 I get an error message saying the backup cannot be saved to my computer.

When I try to sync or update my iPhone 4, I get an error message saying the backup cannot be saved on my computer.

i'm having the exact same problem with both my ipad and iphone. they will not backup. hence i cannot update my iOS. very frustrating. it seems like this is a common problem. hopefully apple will have a fix....

I want to upgrade to OS X 10 from 10.6.8 but get a message that it can't be installed on my computer.ssage that it "can't be installed" on my computer

I want to upgrade to OS X 10 from 10.6.8 on my Macbook 4. I get an error message that it can't be installed on my computer.

iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

You can't reformat it and not wipe everything on it.
Have you tried a different USB port?
Only other option, back it up on a different computer.

I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"

I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"

Why should I have to spend money to solve this problem? Many others have the same concern, Airport Utility 6 does not support older Airport Express units. This is Apple's problem. I've tried many solutions proposed on the net but none worked. I'm still trying for a work around.

'this software cannot be installed on this computer' install error-why?

10.3.9
have the 2 10.4 dvd's. insert disc 1, 'install mac os x', restarts then begins installation, then get 'this software cannot be installed on this computer' message!!!
have repaired disc and disc permissions from disc utility, have zapped pram, have pulled hair out!!! still get this message, anybody any ideas?
all i want is 10.4 running!
pb g4, 1.25, fw800, 1gb ram

The grey discs will only install on the model of Mac with which they shipped. If these discs didn't ship with your Mac, and they don't work with your Mac, well then there's not much you can do.
As far as it being legal or not, it is illegal to install this software on more than one Mac at the same time. If the original owner of these grey discs is no longer using the software and has removed the software from his system, and he has not retained other copies of it, then it is legal for him to transfer ownership of the software to you, and legal for you to use it. But that's not of much help to you if you don't have the correct model of Mac.
Get the black retail Tiger install disc from amazon.com or elsewhere. It will work on all Mac models with built-in firewire.

"Mac OSX cannot be installed on this computer" Error

What Mac/Specs:
I am trying to completely clear out and reformat a 13" MacBook Pro 2.26Ghz with the 250GB hard drive (mid-2010 version) which had been running Mountain Lion to its "factory" settings.
Hurdle 1:
When I tried to reformat it I had the erase/partition options greyed out. Duh- needed to use a different start up disk.
Actions taken & Hurdle 2:
I then inserted the original disk (with OSX10.6) and started up with the C key held down but ended up getting the above error message "Mac OSX cannot be installed on this computer".
Actions taken 2:
I tried to "backup from Time Machine" (as that was the only option I could click other than restarting) and managed to access the Disk Utillity that way. I was then able to erase and re-partition the drive as Mac Extended Journaled and made sure that the S.M.A.R.T. verification was verified before I did so.
Hurdle 3 (= Hurdle 2):
This got me to the point of having a clean slate but the error message persists.
Question:
What can I do to move forward? I do not want to reinstall Mountain Lion, I want to pass on the computer restored to its original factory settings.
Please and thank you.

Sorry for the late update- I ended up checking the disks (I have two MacBook Pros bought two months apart) and tried the other one. Turns out that though they were the same OSX (10.6.3 v1) they had different teeny serial numbers.
To answer BDAqua- yes, it was the disk for the same MacBook Pro model but clearly not "same" enough. And no- the disks had never been used. Pleased to report that it is all sorted now, but wanted to thank you massively for your answer anyway.
You had it in one!

Although system requisites met, get error message "OS X Mavericks cannot be installed on this computer". Any ideas? MacBook Pro w/ Lion...

Similar Messages

Maybe you are looking for