Alum art reverting back to old - Not saving new?

HI Folks,
Quick question on album artwork.
I have the iTunes match service and I have been experiencing artwork problems with a couple of files.
Basically, I know how to change the artwork etc and that’s fine.
However when I then run iTunes match or I turn off the computer and back on again, I’m finding that the artwork is reverting to the previous artwork for the file, even though I had deleted and replaced it?
Any ideas how I can ensure my artwork changes stick?
I’m sure this is something simple, but perhaps I am missing something.
Best Regards and Thank You
Simon.

Are you creating the slideshow directly from an album or from the slideshow mode? It sounds like you're trying to create the slideshow from an event of photos. Try selecting the photos in that event and creating an album with just those photos in it. Next select the album and click on the Slideshow button at the bottom.
Now when you select the Scrapbook theme you can move any photo you'd like to the beginning of the thumbnail tray at the top and it will remain there for the slideshow and title slide.
When done select the slideshow (configure it to the 4:3 iDVD aspect ratio) in the left hand pane of iPhoto and use the Share ➙ Send to iDVD menu option. In iDVD select a theme and make sure all is as you want it. Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

Similar Messages

Old Illustrator file, revised to new, saved to pdf, reverting back to old Illustrator file

After making a new Illustrator file from an old one, then saving it as a pdf, the new Illustrator file reverts back to old one. I have been using the pdf to make the Illustrator file again (luckily I've saved it as editable) but I don't always want to add this extra procedure. Does anyone have this issue or any clues on how this happens and how to fix the problem?

when you made your changes and then saved as, you saved your changes to a new file. your original file closes without saving and the open file in illustrator is the new one (in your case the PDF).
evertime you save as you are making a new file without affecting the old file.
you should first save your changes and then save as. but after the save as, the opened file will no longer be the original file.
if you do a Save As Copy. then you will be saving a new file which will be closed and your original file will remain open.

TS2529 I am trying to set up a new iphone to my old iphone's settings. When i have tried to back it up it displays a error message saying that it cannot back up because the back up was not saved. Anyone have any ideas?

I am trying to set up a new iphone to my old iphone's settings. When i have tried to back it up it displays a error message saying that it cannot back up because the back up was not saved. Anyone have any ideas?

First backup the old phone to iTunes using right mouse click then backup after that restore from backup on the new device .

Revert back to Old status if ticket results in error..

Go to transaction CRM_DNO_MONITOR. Select a ticket for display. Let the status of the selected ticket be NEW. Now input all information in standard and screen Enhancement(By EEWB) input fields. Now make an action 'assign' After saving the status will change to Assign. But at the same time there is a screen validation dependant on the status change from New to assign. According to that the validation happens in PBO event of the Screen enhancement where we are getting Old as well as new status. Here it is found that remarks in long text is to be entered while this perticular status change is happening. but the same is not done. So there is a error message that 'you have not entered remarks general'.
   When the error occurs the status should change back from assign to New. Since user may go out of ticket without saving Or the error pop up will throw you out of ticket. When the user again opens the same ticket, the status of the ticket is Assign. So there should be a BADI or open routine available after before the update to database happens for the new status. Also this enhancement should happen after Screen Enhancement(By EEWB)'s PBO event. So validation of screen enhancement can be carried out.
   In short please provide enhancement or routine or function module which can revert back to old status.

Go to transaction CRM_DNO_MONITOR. Select a ticket for display. Let the status of the selected ticket be NEW. Now input all information in standard and screen Enhancement(By EEWB) input fields. Now make an action 'assign' After saving the status will change to Assign. But at the same time there is a screen validation dependant on the status change from New to assign. According to that the validation happens in PBO event of the Screen enhancement where we are getting Old as well as new status. Here it is found that remarks in long text is to be entered while this perticular status change is happening. but the same is not done. So there is a error message that 'you have not entered remarks general'.
   When the error occurs the status should change back from assign to New. Since user may go out of ticket without saving Or the error pop up will throw you out of ticket. When the user again opens the same ticket, the status of the ticket is Assign. So there should be a BADI or open routine available after before the update to database happens for the new status. Also this enhancement should happen after Screen Enhancement(By EEWB)'s PBO event. So validation of screen enhancement can be carried out.
   In short please provide enhancement or routine or function module which can revert back to old status.

Album art reverting back to previous?!?!?!

What the heck?!?
I've been updating and organizing my iTunes the last few weeks and I just today there is a certain lot of tracks that have all reverted back to the art work that was previously in there. Ive spent hours today updating all this music. All the updated data is fine bu the album art reverted back. UGH. I spent so much time on this. Anybody else experiencing this and have a fix?
Thanks,
G

I can think of several minor scenarios where this might happen, or it looks like it is. I use an older (and I think better) iTunes so I can only reference to this. If I drag artwork to a file's display box and add the artwork to a file that already has it, the new one shows in the box. If I go to another file and return to the first, the old artwork appears in the box until I click the disclosure triangle. The first added appears by default. If I don't want the first I have to change the order in the get info window. An extension of this is the first track provides the artwork for the album. If I change the artwork in a later track it may only appear for that track.
I suppose if you are using any of the labeling and artwork services the Store has then something could be going on there.

Reverting back to old layout - role comparsion RSUSR050

Hi Folks,
We have upgraded to ECC 6.0 and BW BI 7.0 . The SUIM transaction for role
comparison (program RSUSR050) has a new layout . compares the objects
in downward display rather than the old 2 column display. Is there a way to
revert back to old display layout ? - much easier to compare .

Hi Dan,
if you have still an old system, you could take the old coding (also the includes SR050E10 and SR050F10) and copy it to a z-report of your own to get the old look again.
Nevertheless it is planned to deliver an improved design for the resultlist to make the comparison easier. But........ it is not clear until now, how long the realization will take.....
rgds, Bernhard

Got to end of trial period for Adobe reader XI and cannot revert back to old version or install another version b/c it says I have a newer more functional version, so now I've got no reader at all and cannot fix. Any ideas how to overcome this?.

Got to end of trial period for Adobe reader XI and cannot revert back to old version or install another version b/c it says I have a newer more functional version, so now I've got no reader at all and cannot fix. Any ideas how to overcome this?.

YOu need to be clear about the products you are using, so we can help you. In particular there is no trial of Adobe Reader, it is free and keeps running. Sounds like you are using some versions of Acrobat - which?
YOu must properly uninstall the trial, don't just delete files or you may get a mess impossible to recover.

Change Outlook Calendar background color but its reverts back to old on restart

Dear Support,
I am trying to change Outlook Calendar background color but its reverts back to old on restart

Hi,
Let's take Outlook 2013 for example, go to FILE tab ->
Options -> Calendar -> Display options
-> Select the Default calendar color and the checkbox for
Use this color on all calendar ->
OK.
In case the Navigation Pane is corrupted, we may try starting Outlook with the switch "/resetnavpane":
Press Win + R and type “outlook.exe /resetnavpane” in the blank box, then press Enter.
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

Itunes can I revert back to old version

Don't like the new itunes can I revert back to old version.

I had the same question. Someone answered perfectly here post https://discussions.apple.com/message/20575126#20575126
The answer was click View > Show sidebar. Devices and playlists will display in the left sidebar once again.

Revert back the OSS notes

Hi Experts,
I have implementaed one OSS notes through SNOTE T.code. This OSS notes is not a solution for my issue. Now i need to Revert back the OSS Notes( Means don't required this OSS notes in my system).any body tell me what are ways i will reach this.
Thanks
Jaya reddy

Hi,
Select the SAP note you have implemented and press CTRL + F2 or choose option deimplement SAP NOTE or RESET SAP NOTE Implementation.
KR Jaideep,

Config.saveNew() is not saving new config hdr id inside CZ_CONFIG_HDRS

Hi,
I am trying to create a new configuration using CIO something as below.But I see that api is returning new configuration hdr id but i dont see that id in CZ_CONFIG_HDRS table.Here is sample code inside java concurrent program.
// Create the Configuration object
Configuration config = cio.startConfiguration(cp, context);
config.completeBeforeSave();
config.saveNew();
ong headerID = config.getConfigHeaderIdLong();
long revisionID = config.getConfigHeaderRevisionLong();
cio.closeConfiguration(config);
Am I missing anything.Why this code is not saving new config hdr id inside the table CZ_CONFIG_HDRS. Please suggest if anything is missing here.
thanks,
ashok

I have done something similar and followed your approach.
The only real difference I see is that after "closeConfiguration(config)", I had these two lines:
context.releaseJDBCConnection();
context.free();
This was over a year ago and it was only a proof of concept. But I do recall that my test code was properly generating the record in CZ_CONFIG_HDRS. Perhaps these two additional lines would enforce the "commit" of the records. It might be worth a try.
Thanks,
Jason

Office 2013 contacts reverting back to old entries

Windows 7, Outlook 2013
I am logged into Outlook but updating my boss's contacts, which I have access to (his mail, contacts, calendar, etc.) which is a separate email/login from mine. I am trying to do a mass update of his contacts. When I enter new information into previously
blank fields and save, sometimes it saves and sometimes it doesn't. I keep re-copying and saving until it all saves.
Then today I come in, and all the updates I did yesterday are not there, the entries have reverted back to an old entry, hence fields like address which had an address are now blank.
We have 5 computers and 3 cell phones hooked up to my boss's outlook/contacts account.
Our IT co's response was they've never heard of this problem and will have to do trial and error.
My computer (and phone) have been newly added to my boss's contacts/outlook login as of 2 weeks ago, and there was never a problem with the other 4 computers and 2 phones before me. However for the past 2 weeks, Outlook has been doing
things like this, with both Contacts and Calendars (however Calendar seems to be stable now.)
I asked IT if possibly one of the devices was set as a master, so that when I update my computer, it's reverting back to the master entry, but IT's response was Exchange doesn't work like that. I unfortunately know very little about Exchange or networking.
I just
unchecked “Check for duplicates when saving new contacts” under Options/People, due to an article on Outlook 2010, but unsure if that has fixed the problem.
Does anyone have any recommendations as to how to fix this? Thank you.

This is not normal behavior. When you sync with exchange there isn't a master, it uses the last update date to determine which is correct. It also creates 'conflict' copies if it's not sure which one is correct. It doesn't sound like its creating conflict
copies though.
What cellphones are you using? How do you sync - over the air, with 3rd party software etc. The problem might be with one of the phones or software, if using sync software.
Does it happen if you use safe mode? if so, an addin may be at fault.
Disabling the duplicate checker might help - but if so, you'll end up with duplicates.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

How to Revert back the changes from the new version to old version

Hi, I need to revert back the changes in one of the Objects in Intergration Directory. Which means, I need to de-activate the existing version, and have the old version activated again. Can you help me on the steps on doing this? Thank you.

Mary,
If you have just saved urt object in IR / ID and not activated it, then u can simply go to the change list tab and right click on ur object and do " Reject changes".
if u have already activated the same, then u wud b required to open the object in IR/ ID.
Click on the history option and double click and open the same object version that u want and activate it.
regards,
Vishal

File has reverted back to old version

Hi,
I opened up an excel spreadsheet and somehow it has reverted back to the original old version that I first made in 2012, I have no idea why it did this.
Normally this wouldn't be a problem as I have saved it multiple times and I back up my mac regularly using time machine, but for some reason all of the versions of this in time machine have saved as this old original from 2012?! I read and edit this spreadsheet at least 2 times a week and have now lost 2 years worth of updates, has anyone had this happen to them before or managed to retrieve any information?
Thanks for any help!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Store and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

New contract, reverted back to old number?

Hi I received my new phone that was taken out in a new contract last Thursday. I wanted a new number to stop all the unwanted calls from my old number.
Therefore text everyone my new number... that came with the phone on a new sim card.
Today I have not been receiving any of my texts and sending texts keeps failing... I thought it was my signal, until I phoned a friend and she said it came up as my old number..
Can anyone advise me why a new phone and contract has reverted back to my old contact number?
Thanks

It looks like they have done this as an upgrade, I would advise you to ring EE and ask them to change your number to a new one, not sure that you can use the number that came with that phone, though.

Alum art reverting back to old - Not saving new?

Similar Messages

Maybe you are looking for