Aluminium Extended Keyboard and Wireless Keyboard Problems

Hi
I'm having problems with both keyboards. I have repaired permissions and repaired the disk.
I can't use the keyboard to invoke the Hardware test from the second installation DVD when restarting (holding done the D key), nor can I boot of the first installation DVD by holding down the C Key. Likewise, neither keyboards permit the pRAM to be zapped.
Holding down the Option key when restarting has no effect.
When typing, some keyboard characters and the function keys just won't work on the wireless keyboard. For example, on the extended keyboard I am using now, I can't type a capital t.
the only way to boot from the installation disk, is to select it as the start-up disk in System Preferences.
the login screen does not allow me to type in the password first time around. it just keeps adding bullets, e.g. •••••••••••••••••••••••••••••••
the only way to get around this is to press enter, let the login window shake itself, and try again.
I think this is a software / firmware / driver problem. Perhaps it is related to the 10.6.8 update? the keyboard problems have only started happening today.
My wife said she had to stop everything the other day, because the iMac demanded (out of the blue) that a restart was required. She could do nothing but restart the iMac.
Without a fully functioning keyboard, the computer is not much use!
Any ideas?

Your wife's remark indicates a KP. See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.
However, if you can't access anything with the keyboards, then your best bet is AppleCare's Express Lane.

Similar Messages

I would like to AirPlay mirror my iMac and be able to use both my magic mouse and wireless keyboard, but the bluetooth range won't let me. Is there a way to extended its range?

I am buying an iMac to AirPlay mirror on my big screen TV with AppleTV (2nd generation). But my TV is located far away from my iMac and I won't be able to use my magic mouse or wireless keyboard via bluetooth connection. I know I can use an app to simulate both mouse and keyboard, but I really need to use the actual devices.
I wish there was a way to pair them to my iPad or iPhone, via bluetooth, and control my iMac via network. It is a cheap solution, as I wouldn't need to buy any other device. I believe all these devices, without modifications, have enough technology to be able to work as I've imagined. The only need was to adapt the software.
Is there a solution simple as this one, or do I have to buy a Bluetooth extender in order to use my magic mouse and wireless keyboard? If so, which BT extender do you suggest and what is its range?
Thank you!

If you are still under warranty, contact Apple to get it serviced. You can also visit an Apple Store or Authorized Apple Service Provider to get it looked at.
iPhone - Contact Support - Apple Support

Problem with wireless keyboard and wireless mouse

All of a sudden, after more than 6 mos., I am having problems with both the wireless keyboard and wireless mouse. I am getting a "connection lost" message on the screen with a picture of the keyboard. It only stays there a few seconds, disappears, then the keyboard is ok again.
The mouse is even more frustrating. I am not using the ball for scrolling, just moving the mouse to move the pointer. It will be working perfectly, then for 15 to 30 seconds will either not respond, or be extremely slow, then be ok again. This has repeated a number of times today, especially when I am in iTunes. The batteries are fine in both devices, since I had the problem, changed the batteries, and still have these problems. Any ideas?

Brian, I called Apple and I think they fixed the problem with the keyboard. Unfortunately, I did not write down the exact keystroke sequence they gave me, but let me tell you what I did. I unplugged the computer and waited 60 seconds. After I plugged in back in, I was told to immediately hold down 4 keys. I think they were something like Ctrl, Command, Shift, and R. Those may not be the exact keys, maybe it was Option instead of Ctrl, and maybe R is not right. I am not sure. Those keys are held down until the second beep is heard after the computer was turned on. Supposedly, this re-established connections between the computer and the keyboard. Sorry I did not write down the key combination. If you can, call Apple and get the proper key stroke combination

Running Boot Camp in Windows 7 with Bluetooth Wireless Keyboard and Wireless Magic Mouse

NOTE: I was installing a fresh copy of Windows 7 Professional on a 27" iMac mid-2010 with a Processor Speed of 2.93 GHz, a Core i7 Processor Type, a Quad Core Processor Configuration, 8GB RAM, and a ATI Radeon HD 5750 Graphics Card. I run Snow Leopard so it is a 64-bit OS. I have a Wireless Keyboard and Wireless Magic Mouse as well. In order to install Windows 7 you need a Wired Keyboard and Mouse. You will also need a Wired Keyboard and Wired Mouse to update Boot Camp.
Updating Boot Camp Assistant (VERY IMPORTANT)
First, plug in a wired keyboard and wired mouse. The Boot Camp Assistant version that came with my iMac was 3.0 so I upgraded it to 3.1 and then to 3.2. I'm not sure if only the upgrade to 3.1 is necessary, but I took it a step further. I was told by Apple Tech Support that you first needed to upgrade to version 3.1 before being able to upgrade to 3.2 These upgrades will not be found using Software Update on the Mac. However, they can be found at http://support.apple.com/downloads/#macoscomponents
They also have software updates for 32-bit machines as well and MacBook Pro updates.
NOTE: Before updating the version of Boot Camp, but after installing Windows 7 and after putting in the Mac OS X Install DVD to run Setup.exe to download the Mac drivers, run Software Update for the Mac while logged into Windows 7 by clicking on Start - All Programs - Software Update for any additional updates.
Next I installed Boot Camp Software Update 3.1 for Windows 64 bit found at http://support.apple.com/kb/DL1336
I then ran Software Update for the Mac while logged into Windows 7 by clicking on Start - All Programs - Software Update
Then I installed Boot Camp Software Update 3.2 for Windows 64 bit found at http://support.apple.com/kb/DL979
I then installed Boot Camp 3.2 Update for iMac (early 2011) found at http://support.apple.com/kb/DL979 but I'm not sure if this was necessary.
Once Boot Camp 3.2 has been installed I ran Software Update for the Mac again while logged into WIndows 7 to make sure I had all the updates.
Configuring a Bluetooth device on a Windows-based computer
(from http://support.microsoft.com/kb/952818)
How to make sure that the Bluetooth service is started (MY COMPUTER WAS ALREADY SET UP TO RUN BLUETOOTH, SO THE NEXT 8 STEPS COULD BE OPTIONAL)
Open the Microsoft Management Console (MMC) snap-in for Services. To do this, follow these steps.
Windows Vista or Windows 7Windows XP
Click Start, and then click Run.
Copy and then paste (or type) the following command in the Open box, and then press ENTER:services.msc
Click Start , copy and then paste (or type) the following command in the Start Searchbox, and then press ENTER:services.msc
In the Programs list, click Services.
If you are prompted for an administrator password or for confirmation, type the password, or click Continue.
Double-click the Bluetooth Support service.
If the Bluetooth Support service is stopped, click Start.
On the Startup type list, click Automatic.
Click the Log On tab.
Click Local System account.
Click OK.
If you prompted to restart the computer, click Yes.
How to connect the Bluetooth device to the computer
1. First off, you need to go into Mac OS and remove the keyboard and mouse from your Bluetooth settings entirely. You'll add them back in later (see 9) below).
2. Boot into Windows using a USB connected Mouse and Keyboard.
3. Go to Control Panel – Hardware and Sound – Device and Printers – Add a Device
4. Turn on the Mouse to send out a signal and once it sees it select it to be paired to the computer
5. Run 3.) again except select the keyboard.
6. Turn on the Keyboard to send out a signal and once it sees it select it to be paired to the computer by typing in the 8 digit number into the wireless keyboard and hit ENTER/RETURN.
7. To see if everything was added go to Devices and Printers and see if they were added to the list.
8. Shutdown Windows 7 and Restart using Mac OSX. If you adjusted the Boot Camp settings while in Windows 7 you will see a Boot Camp icon in the system tray located at the bottom right of the screen. From here you can logoff and reboot in Mac OSX. If you don't, do a RESTART and hold the Option key down after hearing the GONG and select the Mac HD option while logging in. Now it's time to add back the wireless mouse and keyboard to be recognized by your Mac.
9. Go to System Preferences – Internet and Wireless – Bluetooth
10. Hit the “+” button to launch the Bluetooth Setup Assistant to find the devices sending out the signal.
11. Highlight the device found and hit “Continue”
12. Do this for both the keyboard and mouse. You will be prompted to type in the 8 digit code into the wireless keyboard in order to pair it with your computer.
13. Click on the pinwheel next to the “-“ sign to rename the wireless devices if you'd like.
I then logged back into Windows 7 to see if the mouse and keyboard were functional and had no problems. For some reason, Windows has problems pairing bluetooth devices that are already paired under a Mac OSX. Many people have updated Boot Camp, yet still were not able to pair their wireless devices because they didn't break the Bluetooth connection on the Mac side first. So both steps are necessary (1) Updating to at least Boot Camp 3.1 if not 3.2 and (2) Deleting the Wireless mouse and keyboard link while running Mac OSX before trying to pair them in a Windows OS.

I found the answers by trial and errors.
@ is obtained by CTRL + OPT + 2
# is obtained by CTRL + OPT + 3
(without shift or caps lock)
These two signs are critical and I fail to understand why this information is not readily available from the help function or from the Apple support.
Jean-Philippe

Wireless keyboard and Wireless Mighty Mouse failure

Hello,
I have just bought an iMac 20" with a wireless keyboard and wireless mighty mouse.
Both the keyboard and mouse will not work properly.
I followed the installation/setup instructions and paired first the keyboard and then mouse. Then the problems started.
1. Mighty Mouse tracking is dreadful and very slow (even after adjusting mouse properties)
2. Keyboard started to drop connection and then when awoke started repeating keys (as if key stuck)
3. Keyboard then disconnected and will not be recognised when searching for Bluetooth devices nor can I pair it again.
4. When both were working the Airport extreme wireless network would be lost (but I think that this is a red-herring and irrelevant)
Interesting once keyboard stopped working the wireless mouse tracking improved.
The only software I have installed since taking the iMac out of the box are (in order)
- Running/installing all Apple updates (including firmware 1.1)
- Installing Firefox 2.0
- Installing Adobe Reader 8.0
- Installing Stuffit Reader 11.0
- Installing Canon Bubble Jet Printer driver
- Installing latest version of Skype
If I use a USB mouse or keyboard they work ok.
This is the second replace imac within 2 weeks. The first had the same problem.
Can anybody help please as I'm new to Mac's after switching from a PC and I do not want to have to chuck either the keyboard or mouse or have the pain of Apple supplying me with a 3rd replacement iMac
Jonathan
iMac 20 Inch Mac OS X (10.4.8)

Welcome to the Apple Discussions. Congrats on the new Mac.
Did you Repair Disk Permissions after the software updates and installs?
Whether this solves this issue for you, it is something that you should always do. Go to Apps/Ut5ilities/Disk Utility and select your OS X HDD. Press Repair Permissions. Run Repair Permissions until no more repairs are reported.

IPad and wireless keyboard do not pair any more

I always had (minor) problems, wehn vonnecting iPad and keyboard. But now iPad and wireless keyboard do not pair at all. Tried 15-20 times, fresh batteries, switched on an off, tried manually - nothing. I noticed that the green LED of the keyboard shines just for about 3 seconds when I switch on - but this has always been like that before. Latest OS of course. Who can help, please?
Lothar

Hi Lothar,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful if you are no longer able to pair your iPad with your wireless keyboard:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Best,
Jeremy

Wireless Keyboard and Wireless Mighty Mouse performing erratically

I got the Apple Wireless Keyboard and Wireless Mighty Mouse as soon as they were available and I haven't had any problems with them until a few days ago. Now, both devices will "disconnect" for a few moments (the screen will show the "Connection lost" icon) and immediately reconnect.
The keyboard usually does it so quickly that it doesn't affect my typing. The Mighty Mouse, however, will sometimes slow down to a very erratic, choppy refresh rate - something like a dusty ball mouse cca. 1994. This usually lasts for about a minute and then fixes itself.
This happens several times per hour. I've tried restarting the computer, restarting the devices (replacing the batteries), removing them as Bluetooth devices and pairing them again, turning Bluetooth on the computer on and off... nothing seems to fix this. Both devices have fresh rechargeable batteries in them, showing nearly-full charge in System Preferences.
Is this a known or common issue? Who's to blame, the mouse and keyboard or the iMac? Has anyone found a reasonable fix?
Thanks.
Message was edited by: Neven Mrgan

Hi Neven:
See my thread about IDENTICAL situation:
http://discussions.apple.com/thread.jspa?threadID=1235070&tstart=30
The erratic behavior is identical, except that only my wireless keyboard is misbehaving. Unlike you, it has become a major hassle for me when I am typing and my keyboard disconnects mid-keystroke. Or, I'm reviewing a website or my work and the keyboard disconnects three/four times in two minutes. Last night, for instance, I was watching something on TV in the background and I saw in amazement as my keyboard just kept disconnecting and reconnecting every 30 seconds.
Otherwise, it is same, same, same: fresh batteries, no other bluetooth devices, 18" distance from the iMAC.
I noticed this began to happen AFTER I downloaded and installed last weeks' iMAC update.
So I reiterate my comment from my own thread:
+_*APPLE, ARE YOU READING THESE POSTS?*_+
There's a ghost in the machine.
Steve
Message was edited by: steveinspain

New mac mini and wireless keyboard

how do I set up a new mac mini and wireless keyboard at the same time?

Since the Mac Mini does not come with a Monitor, Keyboard or Mouse those are needed when setting up a Mac Mini. I don't know what brand wireless KB you have or if that even matters.
I have an Apple wireless keyboard (bluetooth), Apple magic trackpad (bluetooth), and Dell DVI monitor. When I initially booted my new Mac Mini, the screen showed it searching for bluetooth devices. It found the keyboard first and then a few seconds later, the mouse. So, I had all devices to finish setup of the Mini.

Magic Mouse and Wireless Keyboard: Should charge off iMac

Apple, you've been shipping Bluetooth peripherals that require disposable batteries for years. It's time to design long-lasting rechargeable batteries into these devices.
Years ago I open-lettered the idea of designing Apple's BT devices with built-in rechargeable batteries. The basic idea consists of a USB cable that is used periodically to connect to the CPU and to the devices. The devices would have a red and green light that become visible when depleted or charged respectively. When the devices require a charge, the USB cable is connected to the iMac and then to the device. The USB cable is put away once the green light indicates a full charge.
No visual clutter, no batteries to dump into the landfill.
While I'm not a rabid environmentalist, the fact that Apple is speaking openly about it's accomplishments in this area (http://www.apple.com/macbookpro/environment.html), while at the same time shipping a Mac that requires disposable batteries is a bit of a letdown to this longtime Mac buyer (since 1986).
Throwaway batteries are unnecessary.
The technology exists to include a long life built-in rechargeable battery. A USB charging cable, used as described above, would not clutter Apple's design intentions for the new iMacs. Instead, it would strengthen Apple's Green Design goals.
Apple has had years to noodle out such a feature. In my opinion, there's no excuse for this oversight.

Hi Chillspike. In response to your comment, +"Is one or two wires (keyboard & mouse) too much clutter for people?..."+
Not all of us have a lot of computer space. My iMac is on a small table along with my TV, cable box, DVD player, etc. I have a rats nest of wires in the back, including my internet receiver, USBs for my iPod, wireless keyboard, and wireless trackball, a backup hard drive, and my printer (I have to switch something else out in order to plug it in). I might sit on the edge of my bed and put the keyboard in my lap, although I usually stretch out in bed a few feet away to work.
I had a wired keyboard and trackball a while ago, and nearly pulled the computer off the table a couple of times as I was trying to get settled in! So going wireless is as much a matter of practicality for some of us, as your preference for hard wiring is for you. If you prefer being wired, I hope someone comes up with a product that meets your needs - and maybe by the time they do they will have the "bugs" worked out of this new one.

I have an ipad3 and wireless keyboard but for the life on me can not type a pound (GBP) symbol - can anyone help?

I have an ipad3 and wireless keyboard but for the life on me can not type a pound (GBP) symbol - can anyone help?

I would think you'd have to change the language to British English to get the pound sign. THat or turn off your wireless keyboard and get the pound sign from the on screen keyboard, then turn your wireless board back on.

Will magic mouse and wireless keyboard work with my G4?

hello, i have a 1.25 Ghz ppc g4 imac and have leopard installed. i was wondering if i get a bluetooth dongle and a magic mouse and wireless keyboard would it work? would i also need a special kind of bluetooth adapter? i already have airport extreme, im going for the modern mac one wire (power cord) look. thank you.

According to this on the Apple Store:
http://store.apple.com/us/product/MB829LL/A?fnode=MTY1NDA1Mg
the Magic Mouse requires at least OS 10.5.8 whcih you don't have.
The current wireless keyboard requires 10.6 which cannot run on a G4 iMac.
I would look to third-party solutions. I like Logitech input devices:
http://www.logitech.com/en-us/home
However, even the Logitech devicez may require a higher version of the Mac OS than you have. Be certain to check system requirements very closely before buying something.

TS3048 My wireless mouse often loses connection. I replace batteries and it works for a few days before becoming problematic again. Battery currently shows 100% and connection is lost intermittently. Bluetooth is on and wireless keyboard works. Any sugges

My wireless mouse often loses connection. I replace batteries and it works for a few days before becoming problematic again. Battery currently shows 100% and connection is lost intermittently. Bluetooth is on and wireless keyboard works. Any suggestions?

Is it possible that you have a bad bunch of batteries?
My Magic Mouse on one computer and the Mighty Mouse on another use batteries I bought through the Apple store (with a charger). They last a long time.
http://store.apple.com/us/product/MC500LL/A/apple-battery-charger
Another possiblity is that the mouse is defective. Since the keyboard connects, it has to be the mouse or the batteries.

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

Mighty Mouse and Wireless Keyboard Bluetooth problems... MISSING BLUETOOTH

Recently I have been using my wireless keyboard and mouse A LOT! and then a few days ago my BlueTooth option on my menu bar disappeared and I cannot find anything related to BlueTooth besides file exchange... Can anyone help with this issue?
NOTE: I have also tried downloading the BlueTooth Firmware update 2.1 from apple and it says that I don't need it... Also, I used both of them a lot, and then it just disappeared, I didn't change a thing...

Hope if no one minds me piggybacking this issue. I've got the same problem but on my new 1 month old iMac 27". Apple has already replaced the bluetooth module and cable and problem has reoccurred.
I've tried trashing my com.apple.bluetooth.plist, shutting it down (disconnecting power chord), leaving it for over 15 mins and powering back on. But MacOSX does -not- regenerate the com.apple.bluetooth.plist file! I've not tried the PRAM reset yet and will probably try that tonight.
Meanwhile, does anyone have any idea why this happens? Also how do I regenerate the com.apple.bluetooth.plist file?
Thanks!
Sean

HT201178 I have a Mac mini with Magic Trackpad and wireless keyboard. The keyboard and track pad got wet so I have purchased new ones. Problem is how do I get past the log in screen to set up the pairing of the devices? The old ones do not work

How do I get past the login screen to pair my new wireless keyboard and trackpad when the old ones are water damaged and don't work

Have you tried pulling the batteries out of the damaged ones so that they are completely off; then shutdown your Mac Mini via the power button on the back right. Turn on your new keyboard and trackpad then power your Mini back up? The auto detection should find your new keyboard and trackpad.

Aluminium Extended Keyboard and Wireless Keyboard Problems

Similar Messages

Maybe you are looking for