Aluminum Cordless Keyboard Loses Bluetooth Connectivity to iMac 24" 2.4ghz

I sent my keyboard that came with my iMac back to  for a replacement it was a
cordless Aluminum Keyboard it would lose it's connection with my iMac's BT
or did the iMac lose it's Bluetooth ?
I now have a new keyboard same type cordless Aluminum and it's doing the
same thing I will go to the BT Menu Bar and it says
no BT items connected I've Zapped the P-ram
repaired permissions, unchecked for Bluetooth to wake
computer in Energy settings and I've read where a clean install
doesn't help. Has anyone figured this out as I don't believe this
started happening until the 10.5.2 update
_I have installed all updates and Firmware updates also._
*iMac 24" 2.4ghz, USB Epson V350 Scanner and Epson R380 Printer USB*
*2 external HD's attached, Logitech VX Revolution Mouse*
*Centurion CD Organizer these are the peripherals I have connected*
*to this iMac with a 802.11n Base Station as my*
*wireless Router with 3 HD's USB connected to via*
*a Powered Hub..*

I called  on 4.23.08 and they are saying
that my iMac 24" 2.4ghz may have a bad or
loose BT Connection inside of the iMac itself
they are sending me a USB Keyboard for my trouble
and they told me to take my iMac into a  Retailer
to have it checked out to see if indeed that my
iMac's BT chip is loose or is bad so that is the route
I'm going to take and I greatly appreciate all the help
and to answer about the Sharing Bluetooth hasn't been on
on this Mac ever so I know that isn't the problem
I threw the BT Preferences away but that didn't help either
hope we can find out what's going on..!
I will leave this discussion open until I take
my iMac for service and if the BT is bad on the iMac
or is loose that would explain it if not we will
keep digging until we find out something...!

Similar Messages

  • I lose bluetooth connectivity with lion on iMac 21.5. Have to reboot to get it to work again.

    Since upgrading to Lion on my iMac 21.5", once a week I lose bluetooth connectivity and have to reboot to get my keyboard and mouse to work.

    Backup up your data from both, and as long as you used Bootcamp to install the Windows partition you should be fine.
    If you used another method, or have more partitons on the drive than Bootcamp, DON'T upgrade to Lion, unless your prepared to rebuild the entire drive, install Lion from boot DVD's you make from the installer and so forth.
    Google "Egg Freckles Lion boot DVD" for details also Google for "Make copies of Snow Leopard install disks"
    Snow Leopard is stable, Lion has issues with older Mac hardware ranging from video to wifi to slow downs to radical UI changes.
    With all the effort placed in setting up Windows and OS X, to do that all over again to take a chance that Lion won't work on your machine is a a lot of risk for little in return.
    When Lion is stable then consider it, but right now it's not.

  • Wireless keyboard won't connect to iMac, when i press the on button the green light comes on and then blinks twice, i can't type my name/password to log in, please help

    wireless keyboard won't connect to iMac, when i press the on button the green light comes on and then blinks twice, i can't type my name/password to log in, please help

    Impossible, there are zero, as in none, zip, nadda viruses for OS X. If you have viruses on it they are for MS Windows and will not affect OS X. I suspect the hard disk has crashed, if you have backup then it's not a big deal to have it changed, just take it into your local Apple Store or AASP for service. If you have not been backing it up you may be in for a painful lesson on why backup is critical.

  • Wireless Mighty Mouse loses Bluetooth Connection

    Our new iMac arrived today and works fine except for the wireless mouse which loses the Bluetooth connection frequently, especially when the mouse is "Turned off" and then turned back on (every time?). Has Apple acknowledged this problem? It appears that there are many (all?) systems failing this way. Numerous boards are reporting similar unreliability of the Bluetooth system. I tried re-seating the batteries and checked all the software settings that might make sense. I read the manual 3 times. Only turning Bluetooth off and then back on seems to relieve the problem, but only temporarily until intentionally turning the mouse off. The connection was first lost in the midst of normal mousing activities. We discovered the relationship to the on-off switch while investigating the first lost Bluetooth connection. I now have a wired mouse connected to recover the lost Bluetooth connection each time it is lost. Help!!!

    HI and Welcome to Apple Discussions...
    Try deleting this file. com.apple.bluetooth.plist
    /Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and restart your iMac.
    *"especially when the mouse is "Turned off"*
    That definitely break the Bluetooth connection.
    Sometimes you need to remove the mouse from the System Preferences/Bluetooth Device window and "re-pair" the mouse using the Bluetooth Setup Assistant.
    To set up a Bluetooth device to work with your computer:
    Choose Apple menu > System Preferences and then click Bluetooth.
    Open Bluetooth preferences
    Click Add +
    Choose the type of device you want to set up and follow the onscreen instructions.
    Carolyn

  • Bluetooth Connection to iMac

    Is it possible to connect with iMac through bluetooth with iPhone 3G and import or export data?

    In a word, no.
    The data that can be transferred to the iPhone is done via the iTunes sync process. I believe there are some 3rd party applications/utilities via the iTunes App Store that allow for data transfer via other means but not via Bluetooth, which is slow compared to data transfer via wi-fi or USB 2.0.

  • Mouse loses Bluetooth connection when left idle

    I am suddenly having an issue where the bluetooth mouse which works off the preinstalled Toshiba bluetooth stack,
    loses its connection when left idle for a little while.
    This was not happening before.
    What could cause this?
    I just changed the batteries in the mouse so that is not the issue.
    Any ideas?

    That doesn't matter. If you can get a newer version for your band then use it.
    If not, install the Toshiba one and see if it works. Afterwards install your old one again,
    but ensure during the uninstallation that you do not remove the old Bluetooth setup configurations (The uninstaller asks for it).
    In this case the newer driver remain on your system. Maybe it solves your problem.

  • Zyxel pk500z router/wireless modem loses wireless connectivity with imac

    My iMac loses wireless connectivity with wirelss internet from my Qwest  ZyXel PK5000Z modem/router intermittently. Have to constantly reboot the router to allow my Imac and other Mac notebooks nto reconnect to wireless internet connection.

    Suggest that you take one or more of Mac laptops down to the coffee place and connect there to check  your performance. If you get a good connection there....as I suspect you will...you know the Macs are functioning correctly.
    If the Macs perform well at the coffee place, you need to contact the ZyXel support folks for ideas on why the PK5000Z device is requiring constant restarts.
    As you might imagine....on an Apple support forum, we are not going to be able to provide much help with a ZyXel product.

  • Wireless Mouse and keyboard have lost connectivity with iMac?

    Computer turned off for a week. Restarted, and wireless mouse and keyboard no longer connected to computer. Help please

    Hello Pompoo220s,
    It is certainly difficult to use the computer if your wireless keyboard and mouse do not connect or stay connected.  I found a few resources I recommend for this issue.
    I recommend reviewing this article first:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    If the issue persists, I recommend reviewing the section titled "Top troubleshooting tips" in the article below.  Step 9 specifically stands out to me for the issue you described:
    9. Restart your computer
    Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
    Bluetooth Quick Assist
    http://support.apple.com/kb/ht1153
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IPod Touch 3Gen loses bluetooth connection

    My iPod Touch willnot hold a bluetooth connection. I have tried it with different devices and same problem. I have used hte bluetooth device with other players and no problem, just with the touch. Any suggestions. Since I have had this model I have been plagued with issues.

    I am trying to pair it with plantronics Backbeat and when that fails the BTHS they are both stereo headphones. In the past they connected without problem, but now it wont hold the connection. I checked the diagnostic and Usage page on my Touch and it stated system crash and some other code talking aobut bluetooth connection etc. I tried to reset the network settings but same results. Will try agian later and see what happens.
    Thanks for the assistance.

  • Why do I sometimes suddenly lose Bluetooth from my Imac? I use it for my wireless mouse and keyboard. I then can't find it in system preferences but have to shutdown my Mac and hope it comes back

    This is an infuriating problem and wondered if it happens to other people too and if I am doing the right thing by turning the Mac off then on again.

    Hi there vickivoo,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    -Griff W. 

  • TS3048 [SOLVED] after changing batteries: keyboard did not connect to iMac

    After changing the batteries of my wireless keyboard, it refused to connect to the iMac.
    It took me half an hour to discover that it was connected to my iPhone instead.
    So if you ever created a BT connection on your iPhone, make sure it does not interfere with the iMac when you swap batteries...
    I simply removed the BT connection on my iPhone.
    Hope this helps others.

    Please  use Apple's Troubleshooting wireless mouse and keyboard issues located by clicking http://support.apple.com/kb/ts3048. Also it is wise to keep a cheap USB keyboard & mouse around in the event of bluetooth problems.

  • My keyboard won't connect to imac

    I have a 2011 imac that has worked fine for several months but I recently installed some bad ram that caused my computer to do some crazy things.  It stopped recognizing the wireless keyboard that came with it and has been used with it for 6 months.  I have turned on the discoverable and the bluetooth, and the mouse still works fine.  Sometimes it sees the keyboard and it just won't pair with it, and sometimes it won't see it at all.  I don't know if there is a way to reset the keyboard or something.  just kinda stuck on what to do with the situation.  Any ideas?
    I was running 10.7.5 when the  issue started, but have updated to 10.8.2 now in hopes that that might help but it hasn't changed anything.

    Select  ▹ System Preferences ▹ Bluetooth. Select the device in the list on the left, then from the action menu (gear icon) below the list, select Update Services. If there's no improvement, delete the pairing from the list and recreate it.

  • I lose internet connection on iMac when it wakes from sleep

    Everytime my imac wakes from sleep I lose Wi-Fi connection.  I am using OS X Mountain Lion.  Please help

    You might try looking at these Apple support articles:
    http://support.apple.com/kb/PH11099
    http://support.apple.com/kb/PH10662 - very simple suggestions only
    Here is another thread with a suggestion:
    https://discussions.apple.com/message/18848093#18848093
    You also might want to consider filing a feedback report. A lot of people are having similiar problems:
    http://www.apple.com/feedback/
    If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.

  • IPhone 6 Plus no bluetooth connection to iMac or Bose Wave, IOS 8.1 last Version is installed

    After update to IOS 8.1 on iPhone 6 Plus and 5s I get no connection to my Bose Wave System or my iMac.
    When I start Bluetooth on iMac and iPhone I get the connection Number on both side. After pushing the connection button I get on the iMac the message "connected" for 5 to 10 seconds. On the iPhone "No connection". I test it 10 times with the same result.
    What can I do? Wait to the next IOS-Update?

    You can only connect your iphone to a Mac if you're using tethering.
    iOS: Supported Bluetooth profiles - Apple Support
    For issue with your Bose, refer to the manual on how to pair with an iphone.

  • Anyone else lose bluetooth connection with car radio since updating to IOS 6?

    I've lost consistent connection between my iPhone 4S and car radio (Kenwood) ever since I upgraded to IOS 6.  This is apparantly happening to lots of people. I use this bluetooth for hands-free calling on my phone so I'm hoping Apple will come out with IOS 6.1 soon to address this software patch.  Others experiencing this with their phones and car stereo systems?

    I'm having probems as well.  I can make calls and play music but I can only change songs on my iPhone 4S but not with the controls on the car.  I was able to do this before the upgrade.

Maybe you are looking for

  • Mapping of bkpf-belnr  with ekbe-belnr

    hi ,          we are mapping bkpf-belnr  with ekbe-belnr, but the field have different value in the tables . is it due to wrong entry in the database or they have different value it self. thanks and regards abaper.

  • Z68A-GD80 Lucidlogix Virtu upgrade from version 1.1.101 downgrades to Evaluation

    I am posting this because I have lost hours for searching for a solution and assume that other people may have this problem. I recently bought motherboard Z68A-GD80 mainly because of it's Virtu support. Upon installing Virtu from motherboard CD (vers

  • Wrong value in "Total of Storage Position Evaluations" in Rearrangement

    Dear Gurus, I am doing rearrangement through t code /n/SCWM/REAR. The value in "Total of Storage Position Evaluations" is appearing as 99999 irrespective of any value maintained in "Evaluate Whse Item" in customizing for storage type, storage section

  • Need help..... regarding ireport and netbeans 5.0

    while running jar file of netbeans5.0 and jasper report by name sales.jar If i run in netbeans project of sales ireport is opening , but when i create jar and run i m getting error message : net.sf.jasperreports.engine.JRException: Errors were encoun

  • MacBooks connecting via Airport Express cards

    Good morning. A colleague of mine thinks it's possible to get machines with AirPort Extreme cards to communicate without the use of a Base Station. Is this possible please? Brian Bowell.