Aluminum iMac + iPod Classic = Electrical Shock!

If I happen to touch the aluminum case of my iPod Classic and either the iMac's aluminum frame or the aluminum keyboard, I get a nice 110-volt AC shock. The iPod isn't generally connected to the iMac--it's connected only to a sound system through the headphone outlet. It's not connected to an AC power source.
Anyone have an idea what's happening? The iMac is grounded. Thanks in advance for any suggestions.
Racer Ralph

Your welcome!
The following outlet testers will only test grounded outlet circuits.
http://electrical.hardwarestore.com/15-62-circuit-voltage-testers/receptacle-tes ter-281667.aspx
To test polarized (ungrounded) circuits in an older home you really need a multi meter and a ground source or a Non-Contact tester to check for proper polarity.
http://electrical.hardwarestore.com/15-62-circuit-voltage-testers/non-contact-ci rcuit-alert-154716.aspx
Have a look at the following article, it shows the difference between a grounded and polarized (ungrounded) household circuits.
http://hyperphysics.phy-astr.gsu.edu/hbase/electric/hsehld.html
Also note: that for both grounded and polarized (ungrounded) outlets the 110v a/c power should be coming from the smaller of the two blade slots.
Dennis

Similar Messages

  • IPod Touch electric shock.

    I have an iPod Touch 4G. When I connect the usb to my computer and the 30-pin to my iTouch, it gives me electric shocks. As it is, the iPod Touch 4G has a metal back, and it really conducts the current. Fortunately, i have a rubber case for the back, so it won't hurt me. I removed thee 30-pin and the charge is at the two sides and the top of the pin. Ok, I tried to lick it, there is still the current. But there is no current when I connect the cable to the USB Wall Adapter. Does anyone know why there is so much current?

    Since no problem with a wall charger that suggests a problem with the USB port on your computer.

  • IPod gave electric shock!

    Three weeks ago i bought 30gb video iPod. And in these two weeks i got shocked by iPod two times. It occured when i connected ipod to my PowerMac G5. But i haven't got shocked at work (MacPro) where i connect and disconnect it more oftenly. Is this bad for iPod or is it my G5? I've noticed that after the shock my mac was giving a little electricity shock.
    Thanks for help!

    Even though you have checked the first obvious signs, there is something wrong in Denmark (a fish, as they say.) There has to be a grounding issue. I will go to an electrical specialist we have on staff, I do not see him here today, but will get back to this thread if he has a suggestion. A person in our audio department says "get it fixed, or get rid of it, that is dangerous." I tend to agree with him. We do want to see you back here posting in good health.
    Don't make us worry and please see if you can get someone to look at the situation. I also have questions: Are you the only one being shocked? Are there any atmospheric anomalies in your area right now (atmospheric, humidity etc.) Let me know.
    - Ken

  • 27" iMac electrical shock

    I'm getting an electrical shock on the outside aluminum case of my iMac- it is extremely strange and dangerous.  This iMac
    is a refurbrished one less than a year old. The mac is plugged into a grounded outlet as well.  The current is also translating to
    any usb device so when I made a move to unplug the hard drive it got shocked as well.  How is it that the current is getting translated
    to the thunderbolt port and/or any USB device attached.  How can the case become electrified??

    If it's still under warrany contact Apple immediately and take it back.  I'm sure they will replace it. That's not to be messed with.
    OT

  • How can I update my iPod classic that will not mount on iMac computer?

    I can't update my iPod classic from my iTunes on my iMac computer with OSX 10.9.  It will not mount or be recognized by iTunes version 12.1.
    I plug it into the USB port and it charges, gives the "Do not disconnect" symbol but the computer does not recognize or mount the iPod at all.  I haven't been able to update the music for years. I have four other devices associated with my Apple ID for automatic downloads. Is it too antiquated to upload any of my music from my computer to it anymore?

    Ahh! The plot thickens!
    I went thru the console and read the error logs. It appears that the .ipsw file does load.....I think. It's been years since I spoke computer....
    Here is what I got after double clicking the .ipsw file and iTunes opened:
    2014-12-28 11:05:02.430 AM syspolicyd[450]: assessment granted for iPod_13.1.3.ipsw by _XProtect com.apple.message.domain: com.apple.security.assessment.outcome2 com.apple.message.signature2: bundle:UNBUNDLED com.apple.message.signature3: iPod_13.1.3.ipsw com.apple.message.signature5: UNKNOWN com.apple.message.signature4: 3 com.apple.message.signature: granted:_XProtect SenderMachUUID: C6FC6A41-170C-3D84-BAAE-6983F164E903

  • How can i transfer my music from ipod classic to itunes on imac

    have an ipod classic, just switched from pc to imac.  would like to load my music from my ipod to my imac.  how can i do this?

    Hello kilgore1trout,
    See this article on how to manually copy the content from your iPod to your Mac.
    http://macs.about.com/od/backupsarchives/ss/ipodcopy.htm
    Or use a 3rd party software such as Senuti.
    http://www.fadingred.com/senuti/
    B-rock

  • I have an iphone 4 connected to my imac/itunes using a designated email address.  However, I also have an 80gb ipod classic which is connected to my general email account. How can I transfer my ipod to the same account as the iphone

    I have an iphone 4 connected to my imac/itunes account using its own designated email address. However, I also have an 80gb ipod classic which is connected to my general email address. How can I delete this and transfer the ipod to the same account as the iphone 4. Thankyou

    iPods, iPhones, and iPads aren't tied to one particular iTunes accout/Apple ID.  So there are no special instructions to follow to allow you to sync it with your newer account.  Simply sync it as you would your iPhone 4. 
    B-rock

  • Ipod Classic 160 6th g. doesn't sync w/Imac g5 non intel OS 10.4.11. This is a replacement for same ipod which was stolen recently. That pod worked fine with Itunes 9! Now this pod says it only works with Itunes 10.7. ***!!!! Why has Apple screwed up?

    My ipod classic 160 6th gen. was recently stolen. It had 3000 tunes on it and it synced perfectly with Itunes 9 on my Imac G5 non intel OS 10.4.11. So I recently bought same model and guess what, it doesn't sync at all. Now message says it only works with Itunes 10.7 and up. I certainly cant afford to buy a new intel based Mac and I really dont need a new pc. It feels like Apple has dropped the ball on its long time users and tough luck to you and all the $$$$$$$ spent on downloading songs and buying ipods over the years! I AM SO ANGRY THAT I CANNOT BRING MY MUSIC WITH ME ANYMORE. I dont know if there is any solution to this except being extorted to upgrade to new tech! I have been trying to get answers to this issue but nothing seems to work. Any help would be greatly appreciated. I am not a tech genius so extremely techy solutions will be in vane.

    one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file.  Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing  even though I have the auto sync feature turned off.
    This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer.   Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar.     Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
    Then if I try and play the music I just transfered, the iPod says there is no music loaded.
    Ideas?

  • I can't sync my iPod classic any longer to itunes on my iMac because it tells me I no longer have the priviledge to make changes? does anyone have a solution to this?

    I can no longer sync my iPod classic to my itunes on my iMac because I'm told I no longer have the priviledge to make changes? any ideas?

    Hello Zabagon,
    I was looking through our resources for information based on what you are describing here. I found an article that may just get you back up and running, called iTunes: Missing folder or incorrect permissions may prevent authorization found here http://support.apple.com/kb/TS1277.
    Symptoms
    With Mac OS X, the Shared folder is required to authorize your iTunes Store purchases. With Windows the iTunes folder is also required. If either of these folders are missing or have incorrect folder permissions, you may notice one of the following symptoms:
    You are unable to complete a purchase from the iTunes Store.
    You are told that you do not have permission to modify your iTunes Media folder when downloading from the iTunes Store.
    You cannot play content you purchased from the iTunes Store.
    An alert appears with the following text:"There was an error storing your authorization information on this computer. The required directory was not found or has a permission error."
    Resolution
    Collapse All | Expand All
    Mac OS X
    Log in to your computer using an administrator account.
    In the Finder, choose Go to Folder from the Go menu.
    Type: "/Users" (without quotes) and click Go.
    Take care,
    Sterling

  • ELeCtrIc SHOCK!!! from connecting my ipod to tv

    I bought my Ipod-5th generation (80Gb)about 6 months ago and didn't buy the AV connection kit until a month ago. Just recently, I found that everytime I plug in the AV cable to my TV, there is an elEcTriC SHOCK whenever I touch the back (metal) cover of my Ipod (I hold my ipod on one hand while plugging in the cable). I immediately unplug the cable just in case it will damage my Ipod. However, I didn't give up and I tried a couple of times, ended up having the same problem (getting shocked a couple of times too).
    I wonder what's wrong with my Ipod or is it a problem of the AV cable? Should I keep trying until I get immuned by the current shock.
    Is anyone having the same problem or knowing what the problem or solution is?
    Help is much appreciated.
    Thanks
    Let me know if there is any further information required.

    It's not the iPod and it's not the cable. It's your TV.
    In Malaysia, does your AC mains power plug fit in the receptacle one and only one way? If it fits only one way, then the problem that I'm thinking of can not happen. However, *IF you are able to rotate the plug* and insert it differently, try that and see if it helps.
    If it's not the power plug, your TV has a serious problem.
    +*By the way, DON'T try to use your iPod with the TV until this is resolved!*+
    Message was edited by: PhillyPhan

  • Ipod classic connection to imac

    I have a 20g ipod wheel. My imac has no fire wire connection as does the ipod. The computer won't recognize or charge the ipod when i use a cable from an iphone,iphone 3gs,ipod mini. it will charge fine from its firewire on its charger. I need itunes to recognize this device, any ideas?

    Your iPod is not an iPod classic. Check out this link to determine which iPod you have.
    http://support.apple.com/kb/HT1353
    Some older iPods cannot charge via a USB connection, only via firewire.

  • IPod Classic to iMac photo transfer

    Laptop died, lost everything. However, my old iPod Classic (click wheel 120GB) still had all of my old photos on it. I have an iMac now and am trying to transfer the photos over. Any good (hopefully free, although not opposed to buying) transfer software? Tried two already and they don't seem to work, or can't "find" my iPod.

    See Putting iPod into Disk Mode.
    If you ticked the option to include the original images these should be visible in the file system on the device, otherwise the iPod will only have low resolution copies. Some of the third party recovery tools are able to extract these but I don't have a recommendation for you.
    tt2

  • Electric shock fom iPod touch....

    Hi
    Okay so I plugged my iPod into the wall to charge whilst doing so I went on to the Internet to check something out. Then I received a massive electric shock when I locked my iPod. Is there anything I can do to prevent this as it has happened lots before???
    Many thanks,
    Anna.

    Could be a problem with the charger or iPod.  Does it happen with another wall charger
    With your computer?
    If it is the iiPod, then I would make an appointment at the Genius Bar of an Apple store.

  • Electric shock while charging IPod Nano 3rd Gen

    Hello.
    I bought a new IPod Nano 3rd Generation (4 gigabytes) and I noticed that, if I touch it while it's connected to my PC, it gives me an electrical shock. It's not a hard shock, but you can feel your finger shake and your arm weakens (it's kinda funny. xD)
    To experience this, you mustn't have shoes, obviously.
    I'd like to know if this is natural or if I should change it for a new one.
    I believe it's something bad because the IPod runs out of battery quickly, but I play Solitaire a lot, so I don't know if it's my fault. :s
    Thanks, in advance, for your answer.
    Pedro Tomé

    BTW this same problem came up back in August and then I suggested to the poster that a bad line cord might be the issue. Turns out that is exactly what it was...
    http://discussions.apple.com/thread.jspa?messageID=5200739
    Patrick

  • My iPod Classic 6th gen won't charge on wall charger and it's not even recognized on iMac or Windows

    Hi! I hope someone can help me with this. I have had this 160 Gigs iPod Classic for a couple of years now and never had this problem before. I have tried to connect my iPod with several cables (which work fine with my iPod Touch and iPhone, by the way), two wall chargers, 2 windows computers  and an iMac and none of them recognize my iPod anymore, it doesn't even appear in Disk Mode.  I have also reseted it several times and still nothing.
    It's was working fine but it ran out of battery now so it just says "Connect to Power" when I try to turn it on. What else can I do?

    The iPod itself has bent pins or the cable?
    If the connection on the doc connection inside the iPod is bent you'll need to get that part replaced.
    Indeed that problem would lead to a false indication and give you the problems you just mentioned above.
    Can you take a picture of the connector and upload it here?
    I've repaired many iPod classics so, I think I can help you out. !!!

Maybe you are looking for

  • How to call structure in Smartforms

    Hi, For single table in Smartforms,we will do... 1)In form Interface, Parameter_name    Type_assignment   Associated_type itab               like             vbak 2)In Main window ->Table->Data Loop... Operand....itab  into  itab... 3)In Main Area->R

  • [875P Neo Series] Replacing the NB cooler with a Titan TTC-CUV 2AB/LD2

    I want to replace my (failing) NB cooler with that Titan cooler. But the problem are the hooks used on P4 board and I have to bend my own clip. So does anyone know if 0.5mm steel wire (spring steel) is enough? Pic of the cooler.

  • How to call a RFC-enabled function module

    Hi All, We have 2 systems; system 1 (client 420) and system 2 (client 600). I just want to know that how can a RFC-enabled function module be called from one system (420) whereas the RFC-enabled functio nmodule exists in the other system (600). Also,

  • My User Interface is super small~ (high dpi screen)

    Hi, so I've got an answer to the problem which surfaced in Photoshop as well as a few others, ~ in the Photoshop settings, _>experimental... UI to 200%. But Fireworks is still super tiny~ Simply can't see it. Working on a Dell Precision M3800, Win8.1

  • Oracle table limitation

    with regard to oracle limiting 1000 column per table I did split the table into two tables but I want to create a view that join the two tables but the view also is limited to 1000 columns , so I have to change all the SQL statements that referenced