Aluminum Keyboard software won't update

Leopard notices that I need an "Aluminum Keyboard Firmware Update" 1.0
I click the box, then, install, and I get the following screens...
1) Updates were installed successfully.
2) Software Update is still Active... Quit Software Update and click continue.
Whatever I seam to do, the software does not update. Any suggestions would be VERY helpful!

I had the same problem. Actually, I did not know it had not updated properly until I ran the software update application again the next day and noticed that I still needed the Aluminum Keyboard Firmware Update. So, again, I selected install software. This time though I closed the software update installer application, as instructed. Then I pressed continue to install the update. The bar ran across my screen showing that the software was updating. It installed successfully.
After the install, I noticed immediately that I can now move my keyboard further away from my iMac. I love the smaller keyboard. It is perfect for working from my lap. I am glad Apple made a wireless keyboard without the 10-keypad for people like me who never use the 10-keypad anyway. Thanks Apple!

Similar Messages

The software won't update and don't display

My ipad1 won't update and doesn'tshow to update software

Hello 3512931312,
Welcome to the Apple Support Communities!
I understand that you have an iPad (1st generation) and would like to update the software on it. The latest supported iOS version available to the iPad (1st generation) is iOS 5.1.1. If your iOS version is lower than that and you would like to update, I would suggest attempting the update with your computer using the instructions located Update your device using iTunes section in the attached article.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
Have a great day,
Joe

MB702LL Software won't update 4.2.1

I have a iPhone 3GS mode MB702LL and the software will only update to version 4.2.1. iTunes says this is the latest version... but the latest version available is 4.3.3 Is anyone experiencing a similar problem?

Do you have the latest itunes version?

Ipod software won't update

I downloaded the new ipod updater and now when I go to update the ipod it won't allow me to click either update or restore. How can I update the ipod?

Is it showing your iPod and the serial number and software version when you open it and the iPod is connected?
btabz

Wireless aluminum keyboard Firmware 1.0 update: Command-accent keystroke.

Hi,
I applied firmware update (1.0) for the aluminum wireless keyboard several days ago and have lost my ability to move to the next/previous window using command-accent/tilde. Has anyone else encountered this?
All other keystrokes are functional and it affects both command keys.
Thanks!

Solution: I reset my Keyboard Shortcuts (preferences/keyboard & mouse) even there there were no conflicts present.

My Ipod software won't update

I can't get my software on my ipod to update from 1.1 to 1.2 everytime I try it just says something about an unknown error 1417 anyone have any ideas???
Windows XP Pro

some folks have been having some success getting past the 1417 by using eboncairn's technique:
eboncairn: iTunes7 & 5th gen iPod updating - is this possible solution? (winXP)

Ipad software won't update

I have just tried to update my ipad software from version 4.3.3 (very old & not been updated in yonks!) to the latest version but after 2 hours spent waiting whilst it downloaded the latest software it failed to update my ipad. There was no error message to say why it hadn't updated.

Try connecting your iPad to iTunes and Check for Updates (tap to enlarge image)

Software won't update on old phone

Trying to use my old iphone as an i-touch but having trouble syncing the apps that I want because they require a newer software version. Each time I try to update the software, the phone freezes up. I am concerned about putting my current sim card in the phone and then updating the software...will it erase any of my current data? Is this what I need to do to make the software update so I can download the apps?

It takes Mac OS X 10.5, a newer version of the operating system, to use iTunes 10.
Check out the software requirements at the bottom left of the download page:
http://www.apple.com/itunes/download/

Software won't update

This may be operator error but I'm new to this. My blackberry pearl 8100 was operating on a VERY outdated version (like version 4.2.0.73 or something of that nature). I downloaded the desktop software version 4.6, plugged in my blackberry and went to the blackberry website and hit the update button. It went through the entire download, then at the very end told me the digital signature wasn't valid and stopped the download. It has done this 3 times!!! What am I doing wrong? Help!!!!

Hello,
You should follow this procedure and reload your OS.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

OS X Server Software won't update to 2.2.1

Hey everybody,
since a few weeks we get a notification from the App Store on our Mac Mini Server, that there is an update available for the OS X Server (current version: 2.0.23).
The OS X Server software was purchased with the Mac Mini (which is a Mid 2011) and runs without any problems.
But as soon, as we want to update we get the message, that we don't have the "extended license" to update the software. Now that wouldn't be a big problem, if we would get the chance to actually BUY that extended license.
Now we tried most common things you try if something like that happens:
- restarted everthing
- tried different Apple-IDs
Do you guys have any clue, what we could try additionally to solve this "problem"?
Thanks up front!
Tim

I have an original day 1 phone. I am attempting to update to 2.1 and after downloading the software, when I connect to iTunes I first get an message "waiting for iPhone" and then after about 1 minute it gives me this message " The iPhone cannot be used with iTunes because the information required for activation could not be obtained from the iPhone." I have checked that the SIM is inserted correctly and it is not PIN - locked.
I have restarted the phone, computer and coffee pot.
Any help would be appreciated...phone in emergency only mode.

Adobe software won't update

Since getting a new computer I've never been able to run Adobe software updates. I just uninstalled and reinstalled in safe mode and am still getting the same error stating that the software (update) didn't download. What can I do to fix this?

Hi Kevin,
Im having a hard time getting a good answer but, Im upgraded from 5.5 to 6.0 and need to quickly add my custom mapkey setting from one to the other.
It was very frustrating to find out that from 5.0 to 5.5 that I had to recreate them all as a power editor and in Final Cut Pro we were able to export or find them very easily.
My biggest pet pee is that I have been told that I need to look for a .kys but, on my MacPro searching on SPOTLIGHT is doesnt exist anywhere.
I urgently need ADOBE to make this more evident because its is really a key root feature that needs to have some attention too.
Im a part of the Bay Area Professional Video Association in San Jose and this is a basic need to be able to export or find my custom mapkey file for PPRO5.5 for 6.0.

Help Software won't update

Ok so I am working on iMac and the software is wayyyy out of date! It is 10.5.8. So I got the Mac OS X Snow Leopard and every time I install it it starts to work then 15 20 mins later he restarts the computer saying it will continue to work after restart. Well it never finishes the installing.
I don't know what to do from here.

I suspect the 10.6.8 install is corrupt, please re-install 10.6.8.

Software won't update, just keeps timing out

I have been trying to do the update, I think it updates Itunes and Imovie, but not matter what I do it just times out and gives some error message. Have tried over WiFi and using an ethernet cable, but no luck so far. anyone have any ideas or fixes

Welcome to Apple Support Communities
http://support.apple.com/kb/DL1574
http://support.apple.com/kb/DL1576

Apple TV New software won't update

I have the newest update available. But it sits for a while and then tells me the update was unsuccessful and to try later. I am having the same problem trying to update a Iphone 4S from a Macbook. Are there issues with the servers. I was able to update my Iphone 4 from a windows computer.

Here's my responses to an earlier thread, that will solve your problem
https://discussions.apple.com/thread/3796337?tstart=0
1/restore using itune
2)change the DNS setting on router and ATV

HT3932 Wireless Aluminum Keyboard Firmware Update

I am trying to install the Aluminum keyboard software update. When I click on the file I downloaded from apple (Jan 25, 2010 - long file name) I get a message that says no aluminum keyboard is connected. The keyboard is on, paired and connected (I can type things; show up under bluetooth, etc). What am I doing wrong? The firmware version is way old (050 vs 321).
Thanks,
Justin

Hello:
Your profile simply says "iPad." What, exactly, are you trying to do?
Barry

Aluminum Keyboard software won't update

Similar Messages

Maybe you are looking for