Aluminum Macbook missing install disks. What to do?

I recently purchased a used 13" aluminum macbook, and it did not come with install/restore disks. I purchased a larger hard drive and want to install the OS.
I understand that I cannot use versions of Leopard older than what originally came with the computer (v10.5.5) to install/restore the OS.
My question is, if I purchase version 10.5.6 will it be "computer-specific" to my macbook? or do I need to find a 10.5.5 version of Leopard? Does apple sell additional restore disks?
Any help would be appreciated.

V.K. wrote:
you should demand the original install disks from the seller. they are useless to him/her and they should be bundled with the computer.
Whether asking nicely or demanding anything of the seller, consider that Apple binds the license to use the software on the system disk set to the Mac they came with. If the disks are separated from that Mac, in effect the license stays with the Mac, not the disks, so anyone using those disks with anything other than that Mac is in violation of the licensing terms.
This is why Apple will (usually) provide new system disks for a nominal fee for a specific Mac -- you aren't buying a new license but just a set of replacement disks.
Note that this applies to all the software on the system disks, not just the OS. Thus, buying a retail version of the OS installer disk is not equivalent to replacing the system disks because the retail disk does not include any of the bundled apps that come with the Mac on its system disks.

Similar Messages

  • Can I use macbook pro install Disk with macbook?

    Hi everyone,
    I have a macbook and macbook pro, I had to reinstall system after harddrive went on the macbook. I can't find my macbook restore disks/installation disks. Would I be able to use the macbook pro install disks with macbook?
    Much appreciate your help.
    Mo

    It might work but it's risky. The MBP installation disks may well not contain the right drivers for the MacBook. It would be better, if at all possible, if you contacted Apple tech support and asked for a new set of disks for your MacBook. They'll send you a set for a reasonable fee. If you can't wait, perhaps there's an Apple Store or other Apple dealer near you that would have a set you could borrow in-store to do the reinstallation.

  • In the second step of bootcamp, I am supposed to either check the box where it says create a windows install disk, what exactly is this? Do I need to do this?

    In the second step of bootcamp, I am supposed to either check the box where it says create a windows install disk, what exactly is this? Do I need to do this? I have a windows 7 install disk, but I don't know what this means.

    If you already have Windows on a DVD or USB drive, you don't have to tick that option. That's only for people who have Windows on a ISO file and have to burn it into a USB drive

  • Missing install disk on new MacBook Pro 15"

    I just received a new MacBook Pro 15" from CDW.  There were no install/operating system disk's with the computer.  In the past my other mac's have come with the install disks.
    Is this a new procedure for Apple?
    I searched for discussions and on the internet but can not find a concise answer for this.

    Look under the Apple menu for your OS X version, if it's 10.6.x then your missing your disks and you need to get them, either from CRW or Apple using your serial number.
    If it's 10.7 then it's Lion and it doesn't come with disks, a recovery partition that requires a strong reliable fast internet connection to download and reinstall it.
    https://support.apple.com/kb/HT4718
    https://support.apple.com/kb/dl1433
    https://discussions.apple.com/message/16276201#16276201

  • MacBook Pro Install Disks

    I recently purchased a 13.3" MacBook Pro running OS X Lion and it didn't come with an install disk.  How can I go about obtaining one in case somethings happens to where I need it?

    You can't as new Macs restore from the internet:
    OS X Lion- About Lion Recovery
    Computers that can be upgraded to use Lion Internet Recovery
    It is possible to create your own USB installer. This requires some effort on your part. Start with this article:
    Downloading Hardware Specific Lion Installers
    Once you have managed to capture the download:
    Make Your Own Lion Installer
    1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the InstallESD.dmg disc image file into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable Lion installer that  you can use without having to re-download Lion.

  • Missing Install Disks

    I need to perform a clean install, but I discovered that my install disks for Mac OSX v. 10.4 are missing. They might have gotten destroyed in a fire we had two years ago. I still have the software coupon that came in the box. Is there any way to get a copy of the disks I am missing?

    I think Apple will replace them for a $20 charge if you have your original receipt. They may also require the serial number of the machine but I am not sure about that.
    Give them a ring.

  • Simple question about missing install disk

    Trying to help a colleague with her laptop.
    She had 10.4 on the machine and mistakenly reinstalled 10.3. She seems to only have Install disk 1.
    Can a basic install be done with only that disk? No apps or anything, just the essential OS? Don't want to get half installed and be stuck.
    Thanks.

    Disc Two has mainly printer drivers and pre-bundled software. You can do a full install of OS X including some printer drivers without the need for Disc Two. You can order replacements by calling AppleCare (have the computer's serial number handy.)

  • Intstall X11 from Macbook Pro Install disk 1

    Does anyone have experience with installing X11? I cannot find the installer for the X11.app. The X11SDK installer is there though
    MBP 15.4" 1.83 W8613   Mac OS X (10.4.7)   iMac DV G3 450, Color Classic, II+, IIe, IIc, IIgs, III+, Various PC's

    Hi Michael, Thanks for your reply, I found the Xcode tools.mpkg which is in the xcode tools folder. I launched this, selected customise, But are unable to see X11 at all. X11sdk is there though. I think I may be using the wrong installer.
    MBP 15.4" 1.83 W8613   Mac OS X (10.4.6)   iMac DV G3 450, Color Classic, II+, IIe, IIc, IIgs, III+, Various PC's

  • Whick MacBook Pro 15" install disk?

    I am going mad trying to figure out which install disk I need for my work assigned MacBook Pro. My office owns a lot of macs and all the install disks have just been kept together. I have found two MacBook Pro install disks, neither of which work, but I'm not even sure if they're the right disks for my model. Anyone know how to KNOW which disk I need?
    *MacBook Pro 15"*
    Model: MacBookPro1,1
    Intel Core Duo 2GHz
    *Disk 1*
    10.5
    AHT Version 3A137
    Disk Version 1.0
    2Z691-6150-A
    *Disk 2*
    10.4.9
    AHT Version 3A124
    Disk Version 1.0
    2Z691-5974-A

    Hi,
    according to this http://www.everymac.com/systems/apple/macbookpro/stats/macbook_pro2.0.html this MBP was released in February 2006 and according to this http://support.apple.com/kb/HT1159 was delivered with either OSX 10.4.5 or 10.4.6 depending on the date of purchase
    So neither of the install discs you mention is the right one.
    EveryMac maintains a good database of all Macs and it might be a good idea to do some inventory on the office Macs and the correct OSX discs.
    Regards
    Stefan

  • Extract Remote Disc Files From Install Disk

    Can the remote disk install files be extracted (maybe the wrong word) from the install disk or be downloaded from somewhere so that I can put them onto a USB drive instead of carrying around my Macbook Air install disks? I'd rather not carrying around my original disks.
    I tried to create a disk image of them, that worked out fine, but couldn't get them to fit onto the 4.7 gig DVD's that I have....
    TIA for any and all help.
    JW

    I know I sound Lazy but there must be someplace to Download the installs for the Remote Disc online somewhere? If not can someone please post it somewhere. It makes no sense to have to carry a DVD around. Pretty Please?

  • I just purchased a macbook pro and was wondering about an install disk.  It seems to be missing some of the applications that should be on it from a fresh install.  I was wondering if I would have to purchase a new OS and do a fresh install?

    I just purchased a macbook pro and was wondering about an install disk.  It seems to be missing some of the applications that should be on it from a fresh install.  I was wondering if I would have to purchase a new OS and do a fresh install?

    Ahhh, well  you never mentioned that before. You need to contact your friend from whom you purchased the computer. He/She should have any and all install discs for any third-party software included as well as for OS X and the original pre-installed software.
    Apple will gladly sell you replacements for any discs that did come with the computer originally, but they will not do anything for you because you purchased the computer used. If it's in warranty still, then you can get any warranty covered things taken care of through AppleCare:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site.

  • HT201257 Hi -- I have a late 2011 13" macbook pro that shipped with and runs Lion. Unfortunately, I do not have the install disks with me. Holding down D key does nothing. What can I do?

    How can I run the hardware test on a macbook pro that SHIPPED with lion (never had an earlier OS) without access to the install disks? I am away from them and home for several months. Holding down the D key does nothing.

    Press "Option" and "D" key together.
    "Restart your computer, holding down the “D” key while the computer restarts.After your computer restarts, you should see the Apple Hardware Test chooser screen. If you don’t, Apple Hardware Test may not be available on your computer. You may be able to start Apple Hardware Test from the Internet. Reconnect your computer to the network, and then restart your computer while holding down both the Option and “D” keys."
    http://support.apple.com/kb/PH4510
    Best.

  • Install Mavericks on Aluminum MacBook 5,1

    I am trying to install Mavericks on an Aluminum MacBook 5,1.  It was built supposedly early 2009.  It has 4 GB of RAM.  It is now running Snow Leopard.
    I have read the specs for Mavericks and Mountain Lion from different sites.
    This laptop should be support either operating system according to what I read.
    I keep getting an error message when I start to install, that Mavericks cannot be installed on this device.  I do not want to buy Mountain Lion, if it will give the same message.  The specs for Mountain Lion are the same as Mavericks.
    So what am I missing in the specs or the install that is stopping the install?
    Thanks in advance.
    Don

    Is the Snow Leopard system updated to the last step of 10.6(.8) because if not, it won't upgrade past SL.
    From what I can tell, looking into database information I have access to, the MacBook 5.1 is a Late 2008 aluminum model; however both the 5.2 model (Early 2009) and 5.1 both are said to support the latest OS X.
    You can 'identify your Mac by serial number' online at one of several different sites, some appear better than others or offer more information. Then, there's the Mactracker.ca download of a good database.
    How full is your MacBook's hard disk drive? If it is near the limits of capacity, that may affect an upgrade. Some users of Snow Leopard held off on an upgrade due to some of their applications being older and not supported past that system; others found issues in their upgrade that were not well suited for an older computer model.
    It is suggested you backup your computer data to an off-computer archive if you want to revert to Snow Leopard, after an eventual upgrade to any later system. Not sure if you'd have to buy a later system in order to try Mavericks. Some users had different paths, depending on the hardware build. And others were happier with Mt Lion than Mavericks in older supported Macs.
    Sorry to not be of much help.
    Good luck & happy computing!

  • System Preferences corrupt  ! install disk missing

    For some reason my System Preferences stopped working saying its corrupt or missing and having just moved i now realise i have lost my system install disks.
    What can i do i cannot believe i left the disks have rang to people were i live and whatever was left was thrown out ! how stupid can you get to leave vital disks behind.

    Ok this is what happened i had been using a USB CF card reader HY-01001 no problem yesterday i had company and the llid was closed and i will still online. I took the card reader out when i turn it back on i got a security message about startup and a file called pace--something ! i took no notice really. Then i tried the card reader and that no longer works i know i never installed any software for it in the first place. I rebooted a few time but every time i got the message saying cant start up system preferences so i tried to start from the application folder but it was report not working, so i went to the directory and deleted it (after all its only an app) there was something above it called pacexxx (cant remember full name) so i deleted that. I have had this happen once before but reinstalled from my disks. Then i realised that i have lost the two disks. I had to move in a bit of a hurry and yes i forgot to pack the disks yes its my problem.
    Now the Macbook 6.1 (late 2009 the serial trace says) is running the card reader will still not work yet my internet dongle works so the USB seems ok and i cannot find a download for the app system preferences. I have no idea if the Macbook as screwed the card reader up or somehow blanked card readers. sorry rambling on a bit
    Apple, well to be honest i could not see why i could not find a download for the system preferences app as it seems to have problems. Its not just Apple but every company seems to use high cost phone lines and you get through to a computer designed to get as much time and money out of you as possible. Having said that i love my Macbook and iPhone so love Apple products i never registered the Macbook but signed up with Apple using the serial number so its my original bought and paid for Macbook 6.1.
    Sorry once again about rabbling any advice
    Why the card reader no longer works .
    Can i make it work again ?
    Can i find a download for the missing app ?
    Peter

  • Installed apps from Macbook Pro Tiger disk to a Powerbook G4

    I bought a used powerbook G4 that came with Tiger installed, but no tiger disk included in the sale (so i'll have to buy my own copy of it if i want to reinstall anything). Everything on the machine worked perfect... until one day.... okay here's the dumb thing i did: My friend has a new Macbook Pro (with Intel) and i hoped i could install programs from his Tiger disk that i didn't have on my computer (like Garage Band). So i put in his Tiger disk that came with his Macbook Pro (even though someone had advised me that it wouldn't work on a G4!) and in it i found a package of optional applications. I couldn't find and select Garage Band separately on the disk so i decided to just install all optional apps from that package. I figured my computer wouldn't let me even start all this if the Tiger disk was incompatible with my G4. Well, it did proceed along and I watched as it installed a bunch of standard programs i already had on my computer. But oh well i figured it wouldn't hurt anything to reinstall apps like that. Then, I just couldn't find a way to list and select individual programs to install, so i just gave up on the whole idea of getting my friend's Garage Band.
    The next day some of my apps were acting funny. Had problems with Mail, Safari and Itunes. Fortunately, doing an update online fixed mail and safari. But itunes continues to not act right and it's always crashing and i have to force quit. Also my netzero software has become corrupted 2 times since the messing with the Macbook Pro tiger disk, and i've had to reinstall the ISP software. If i buy my own Tiger disk for G4 then i can reinstall itunes completely and hopefully that would solve it's problems. But i'm worried that when i messed with the Intel tiger disk i may have put some code on my hard disk that's harmful and useless to a G4 and could cause further problems down the road.
    So my question is: Has anyone heard of this happening before and what would be the best thing for me to do? And i hope that if i must reinstall the whole OSX tiger, that i can use the "archive and install" mode so i won't lose any 3rd party software on my powerbook.
    Thankyou for reading.
    powerbook G4   Mac OS X (10.4.7)   10.4.6 installed then updated to 10.4.7

    I would not advise an Archive and Install because it will preserve components of the old system such as your users folder (unless you opt not to do that) which may contain items that are now not compatible. Archive and Install also keeps applications that now are incompatible.
    I would recommend the following:
    1. Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button, then select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    After formatting has completed quit DU and return to the installer. Now proceed with OS X installation.

Maybe you are looking for