ALV- Additional field.

Hi
I am using the ALV report to display Payment Run data.
In the offset it is displaying some fields. Now my requirement is to display an additional field cost center.
Can some one plz help....

ZRFZALI30...is this a standard program.
The program that i have to edit was initially done by some one else.
but it has ZRDZALI30 in the initial comments....so i figured its copied.
and the cost center field was not fetched anywhere in the output.
so my program ZRFZALI20 is the one. Do I have to make changes to this....or copy this and make changes????

Similar Messages

Add color to an Additional Field inside a SAP Query (Infoset) in ALV

I made an Infoset (transaction SQ02) out of table MARC. I created an Additional Field called "STATUS" which I coded to get a value of 1 or 2 depending on the value of another field in MARC.
How can I make this cell in the resulting Query to appear in different colors depending on the value? I found the command "FORMAT" but that doesn't work on SAP List Viewer (ALV) mode.
This is what I coded in the additional field called STATUS::
clear: STATUS.
if MARC-DISPO = 001.
format intensified color = 6.
move '1' to STATUS.
else.
format intensified color = 7.
move '2' to STATUS.
endif.
The coloring didn't work. What ABAP command should I add to this additional field to make the coloring of the STATUS cell work under ALV mode?

field catalog and layout are saved into database aqrdb
just before displaying the results into ALV table, they are retrieved by function RSAQRT_ALV_DISPLAY which does
concatenate rtmode-act_report sy-langu into l_srtfd_pattern.
import fieldcat = fieldcatalog
         layout   = layout
         sort     = sort
         from database aqrdb(lv) id l_srtfd_pattern.
so in order to display some cells with a different color, you have to
- add an additional field that will contain the color codes of cells
- set values in this field at record level (field is a table of type LVC_T_SCOL)
but also adapt the layout in order to set the field as containing the colors
- put the name of this field into layout (CTAB_FNAME)
- export layout to corresponding entry of aqrdb
this part I don't see exactly where to put it, I guess there is some place where it is possible to manage the layout - if not then you have to do it "manually" i.e. with a small report

How to add additional fields to zreport which contains standard report code

Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
     or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.

Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010       00 A1'
    %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
                             with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

How to add additional field to the existing report

hi,
report name is RHXPE_EXPIRED_QUALI
if u execute report alv list is genereted with like this.
object type, id of related object, object name, object type, id of related object,last name, first name like this
where can i get these field descriptios in the prigram becoz many perform ststements r there. i want to add additional field text.
program is:
CORRECTIONS
DATE       CORRECTION NOTE    AUTHOR DESCRIPTION
09.03.2001            0388404 XSC    Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud    Wrong keydate for search with
                                     Pchbegda and pchendda.
30.01.2002 S6BK000033 0491055 TS     Report: RHXPE_EXPIRED_QUALI
                                     doesn't provide a spool list.
REPORT rhpk_find_pers_with_expired_qu MESSAGE-ID pq.
TABLES : pchdy.
INCLUDES
INCLUDE rhxmacro.
INCLUDE rhpeini0.
TABLES
DATA: objects LIKE hrsobid    OCCURS 1 WITH HEADER LINE.
VARIABLES
DATA: subrc LIKE sy-subrc.
DATA: orgeh_text LIKE t777o-otext.
SELECTION SCREEN
objid
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
   pchplvar LIKE p1000-plvar NO-DISPLAY,    "plan version
   pchotype LIKE pchdy-otype NO-DISPLAY. "objecttype
Objid
rhx-f4-objid-data.
SELECT-OPTIONS: pchobjid FOR pchdy-objid_str NO INTERVALS.
Search
PARAMETERS:
pchseark LIKE pchdy-seark.           "matchcode object plom.
SELECTION-SCREEN END OF BLOCK b1.
Objecttime
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
PARAMETERS: se_begd LIKE p1000-begda DEFAULT sy-datum, "'19000101',
            se_endd LIKE p1000-endda DEFAULT high_date.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS:
   h_events LIKE dynp_rhpp-gen_train, "with training sugg
   h_qual LIKE dynp_rhpp-expired_qual. "with Qual
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN.
PERFORM check_plvar(rhxchk00) USING pchplvar.
PERFORM check_seark(rhxchk00) TABLES pchobjid
                                USING pchseark pchplvar pchotype.
INITIALIZATION
INITIALIZATION.
PERFORM read_t77s0_parameters_for_pe.
get user parameters/Planvariante und Beginndatum setzen:
pchotype = $orgeh.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
       EXPORTING
            fill_if_initial = 'X'
       IMPORTING
            plvar           = pchplvar
            begda           = se_begd
            endda           = se_endd
          with_key        =
          SUBSTITUTE      =
          ESSENTIAL       = only_essential
            org_unit        = pchobjid-low
      EXCEPTIONS
            OTHERS     = 0.
SE_BEGD = LOW_DATE.   "Correction AL0K023393 0410219
IF NOT pchobjid-low IS INITIAL.
    pchobjid-sign   = 'I'.
    pchobjid-option = 'EQ'.
    APPEND pchobjid.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
correction 0491055
correction was done for getting a spool list in background-processing.
CASE sy-batch.
    WHEN space.
      SUBMIT rhpe_expired_quali
           WITH pchplvar = pchplvar
           WITH pchotype = pchotype
           WITH pchobjid IN pchobjid
           WITH pchbegda = se_begd
           WITH pchendda = se_endd
           WITH h_qual = h_qual
           WITH h_events = h_events
                  AND RETURN.
    WHEN 'X'.
      SUBMIT rhpe_expired_quali
           WITH pchplvar = pchplvar
           WITH pchotype = pchotype
           WITH pchobjid IN pchobjid
           WITH pchbegda = se_begd
           WITH pchendda = se_endd
           WITH h_qual = h_qual
           WITH h_events = h_events
                  TO SAP-SPOOL.
ENDCASE.
END-OF-SELECTION
END-OF-SELECTION.

Hi,
I think you need to show more programs.
you said, the report program is 'RHXPE_EXPIRED_QUALI', but you upload 'rhpk_find_pers_with_expired_qu' program.
usually, ALV field is modifyed in 'PERFORM fieldcatalog_modify', if you use Functional ALV.
Try to search 'fieldcatalog function', you will find easy.
Regard,
SY Kim

Additional field in report S_ALR_87011990 - Asset History Sheet

Hi
This is with reference to report S_ALR_87011990 - Asset History Sheet .
I want to add quantity, location etc in this report.
can anybody guide me how to add these additional field in this report as in configuration no such option available.
Regards
DD

Hi,
this is decribed explicitely and detailed in the WIKI entry Include additional fields in Standard Fixed Asset ALV reports.
That´s much faster then enhancing the report. Further more you would still operate on a standard report, not a copy based on the standard report.
Regards,
Markus

Additional field in CRM_DNO_MONITOR

Hi All,
I am working on Solman7.0 EHP and configured incident management for my service desk. Question is I want to add one additional field in Tr.CRM_DNO_MONITOR (eg.Location) let me know if need to use any badi.
Regards
Subbaraju

Hi as Jiamin said you can use Badi CRM_DNO_MONITOR (In TR SE19) but if you want to give to final users the right to filtrate result list based on this field you don t have any other choice than adding a field to selection screen of a copy of report crm_dno_service_monitor.
What you can do in CRM_DNO_MONITOR badi is adding columns to displayed ALV (prerequisite is a structure append of structure used for displa : CRMT_DNO_SERVICE_MONITOR) and reorganisation ta results before display (changing columns title...)
Regards
Khalil

Additional fields in ACACPSDOCITEMS

Hello
Is it possible to add additional fields in ALV of transaction ACACPSDOCITEMS?
We want to add the fields start account and target account in the result.
Best regards
Daniel

where do you expect to populate the data for "additional" charactersitics from ?
If you are going to make use of ABAP to derive values for the added characteristics, you should add the ABAP for update rules of the characteristics.
If you are expecting that the values should come from the info source / ODS, then mapping for the fields should be first maintained in the respective structures even before you activate the update rule.
Anil.

COOIS - Editable additional fields

I'm intending to extend COOIS structure IOOPCOMP to add in additional fields but what I'd also like to do is make these fields editable and perform functions with the field values when the user presses a push button. I have BADI WORKORDER_INFOSYSTEM but this won't let me play around with the ALV fields to make them editable. Can anyone recommend a way to do this?
Thanks

Hi,
have a look at badi WORKORDER_INFOSYSTEM.
method ORDER_TABLES_MODIFY.
and check this thread (pay attention to the oss notes):
Re: Urgent:Regarding COOIS transaction
Best regards.
Best regards.
Edited by: pablo casamayor on Mar 25, 2008 4:33 PM

Additional field in adhoc query

Hi all, I need to be able to report on the IT105 subtype 0001 system ID for employees who are withdrawn from the company, however, when someone leaves their IT105 record is delimited so adhoc query will not output anything. Has anyone coded an additional field that will look at the latest record regardless of the date?
If you have, please can you share the code with me!?
Many thanks!

Hi Tanya ,
Please find the code below. It is designed for additional structure z105_last which is bassed on P0105 type.
data l_it_p0105 type standard table of p0105.
clear: l_it_p0105, z105_last.
call function 'HR_READ_SUBTYPE'
exporting
    tclas                 = 'A'
    pernr                 = peras-pernr
    infty                 = '0105'
    subty                 = '0001'
    begda                 = '18000101'
    endda                 = pn-endda
tables
    infty_tab             = l_it_p0105
exceptions
    others                = 1.
if sy-subrc = 0.
describe table l_it_p0105.
read table l_it_p0105 into z105_last index sy-tfill.
endif.
Regards,
Sergey

How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
Thanks for any suggestion

Additional field for Infoset in BI 7.0

Hi
I have created an Infoset with a cube and a masterdata object. Now my requirement is to have an additional field which i can not extend to cube or masterdata.
Is it possible by any chance to add an additionla field to Infoset and write an abap code ?

Any suggestions ?

How to get additional field from the second list base on lookup information column ?

Hi everyone,
Currently I created a SharePoint hosted Apps project and I need to know how can I get additional field from the second list base on lookup information column. example List1 Have 2 columns column1 and column2(Lookup Information from list2 (category)),
List2 have 3 columns title, and category, and color. so how can get the title and color from list2 base on this lookup information column (SharePoint Hosted apps and Javascript code)? that is possible?
Best regards,
------------------------------------------------------------ ---Tola---

You can build one custom lookup control. Refer to the following post
http://www.stuartroberts.net/index.php/2012/10/03/enhanced-lookup-field-part-1/
Alternatively, try the following solution from codeplex
http://sp2010filteredlookup.codeplex.com/
http://filteredlookup.codeplex.com/
--Cheers

Adding Additional field "Supplier name" & "Supplier No" in MB5B Report?

Can i add the above stated two additional fields in the standard report of MB5b, is there any implicit enhancement in the standard report which can help achieve my objective?

Hi,
The possibility to include additional fields in the report MB5B is
limited to MSEG, just as you can see in the text of the
report RM07MLBD_CUST_FIELDS itself:
This include contains the structure for additional fields for report
RM07MLBD ( transaction MB5B )
the following fields are not shown in the list of report
RM07MLBD
If you want to insert some of these fields in the list of the
hidden fields delete the '*' in the type definition.
>>* There are only fields from database table MSEG possible <<<<<<<<<<<
Please use only the following fields, because these fields
are considered during the creation of the field catalog;
plaese consider, that each active field will cost performance
If you need to add aditional information from other tables, like the
Reference Document Number you will need to build your own query.
Regards,
Mauro

Additional Field in standard maintenance view

Hi Experts,
I would like to add an additional field plant in maintenance view V_TKZU3_CO (SPRO PATH: Controlling --> Product cost controlling -->Product cost planning --> Basic settings for material costing -->Overhead -->Define costing sheets ).
What I'm planning to do is to modify the standard maintenance view V_TKZU3_CO and regenerate the table maintenance generator so that the new field will be added and populate a ztable a copy of table TKZU3 + plant...
However what I'm afraid of is when I regenerated the table maintenance generator using the standard function group OCOE, it might impact some other standard object included..
Do you have any idea on how can I add the additional field without modifying the standard? Or if I will apply the standard modification I'm planning.. what are the possible impacts?
Thanks in advance!

Hi
U can create a new table view like V_TKZU3_CO, insert your new fields and create the maintenance view program for it.
Max

Additional Fields for ESS-Business Card Not Working for Certain Countries

Dear Experts,
We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
Please help!

Hi Siddhart,
Thank you for the information. We are currently in EhP3 with below Support Components installed.
Software Component: SAP_HR
Release: 600
Level: 60
Highest Support Package: SAPKE60060
Software Component: EA-HR
Release: 603
Level: 34
Highest Support Package: SAPK-60334INEAHR
The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
Anymore hint? Anyone? Please...

ALV- Additional field.

Similar Messages

Maybe you are looking for