ALV button fails to work in PERSONAS 2.0

Hi,
I have an issue in IW32 where the table control which has a button in one of the columns fails to trigger the long text screen.
It works fine in the basic view, but not in my flavor.
The table I am referring to is under Components Tab. In my flavor we have dragged the table to the common area for user ease and hidden all the tabs in the page. See attached image.
Issue: Button does not work. It is supposed to launch the long text screen.
Anybody face this similar issue? Any ideas on what could be going wrong here?
Abraham

Hey 24Golfer,
You can request features added to the iPhone software online here:
http://www.apple.com/feedback/iphone.html
Jason

Similar Messages

Power button fails to work about 95% of the time

Hello,
I have a Toshiba P205-S6267 that is having a strange issue.
About 95% of the time the power button fails to work when on battery, and it fails 100% of the time when the AC adapter is plugged in.
I am getting pretty stumped on this one and starting to think I may need to replace the 7-button circuit under the power button. Before I spend the $55 to do that, I wanted to see if anyone had any advice for me.
Here are the things I have tried.
- the standard unplug the power / battery and wait a few minutes then plug it back in.
- tried this only on battery, same issue
- tried only on AC, won't power up at all
- checked AC adapter with multimeter and it was outputting the correct voltage (also it keeps the battery charged still)
- removed the keyboard and speaker cover then reseated the 7-button circuit
- cleaned the ribbon cable contacts and reseated the ribbon cable for the circuit
- removed RAM and tried each stick by itself, no change.
I'm kind of lost here. Again, I am probably at a point where I need to replace hardware but I don't want to drop the cash without some kind of verification that I'm not retarded.
Any assistance or advice is welcome. Thank you.

Ah, I've been playing around with this and it seems I was mistaken about the nature of the problem.
It is deterministic, for one. It seemed nondeterministic because the action that makes the glasspane paint() fail is the act of giving focus to the JInternalFrame that the glasspane belongs to.
Why does giving focus to a JInternalFrame disable that frame's GlassPane? I can take focus away from it, and the repaint() method starts working again.

Why does my home button fail to work

My home button on iphone 4 does not work unless I hold it for 15-20 sec, then voice control comes up.

why does my home button fail to work
maybe it's broken?
Restore the phone and set it up as a new phone to isolate a software issue.

Occasional MacBook Pro 8,1 / Feb 2011 trackpad button fails to work

Having this really annoying problem on occasion with a new 13" MBP (purchased a month ago in Toronto from the Apple Store Eaton) - every once in a while the trackpad button will fail to work. The trackpad will function just fine, but the button will not work no matter what you do. I also have a Magic Mouse; if the trackpad button won't work, neither will the MM.
It's a new MBP 8,1 running Lion, with 8gb RAM (1333mhz DDR3, 4gb per stick) and a new 1Tb drive. I will point out that this error preceded the RAM and HDD upgrade by some time, which suggests it's not due to the new components.
Being new, it doesn't run hot, nor is it due to a swollen battery. I spoke with a friend who suggested a PRAM reset. That didn't work; the behaviour started up again within 1 hour of resetting this.
I've noticed that it only seems to arise with Internet connectivity issues - if I turn WiFi off (on purpose as I want to save battery) and I leave a browser window open, chances are high that I won't even be able to log in using the trackpad button. In these cases I can usually use the keyboard with an Alt-Tab to switch out of hung applications, but it doesn't always work. If Safari is left open (say at a coffee shop) and I take the MBP home, and reconnect, it will frequently show this non-working button behaviour too.
Other 'remedies' or workarounds include re-enabling Wifi off and on again, but that doesn't always work; flipping the lid down, then reopening for another attempt at login doesn't always work either.
I took it back to the store 2 weeks ago, but they kept thinking it would be a hardware issue and wanted to replace the trackpad - without guaranteeing that this would solve the problem. And the fact that it does work again after a log off suggests to me it's not hardware, it's software.
Tonight after the coffee shop at lunch, the MBP button would not work after I returned home. Rebooting twice did not help.
Any ideas, anyone?
Cheers
Massimo Savino

Delete CleanMyMac2. You do not need it and may be a contributing reason for your problem.
Check Activity Monitor for applications that may be using a lot of CPU resources:
http://support.apple.com/en-us/HT203184
Run an Apple Hardware Test:
http://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
You also might test the MBP with the original RAM module in place of the 8GB module you installed. There may be compatibility issues.
Ciao.

RED IPOD CHROMATIC 8GB BUTTONS FAIL TO WORK

Okay so, to my recollection:
1.I added a podcast to the iPod
2.I clicked the eject button on itunes after the little circle thing had 3.finished spinning and my ipod disapears from the itunes menu
4.I look at my iPod - it still says "synchronizing - do not disconnect"
5.The buttons on my iPod fail to work
6.I plug my iPod into speaker dock, and am able to use all the buttons including the click wheel to turn up the volume.
7.I take the ipod out - the buttons stop working again.
8.I return to my iPod a day later, and try to plug it into the speakers - now the buttons are either not working altogether or acting up (if I press >> to skip a song, it instead fast forwards the song)
9.I've reset the iPod several times (Menu & Select) and nothing is working
p.s. my computer still recognises the iPod on itunes!
Has anyone else experienced this? Really annoyed..this iPod was brand new at christmas. It is my 2nd ipod, my first one had the 'dreaded white screen'.
Do iPods have built in obsolescence?

I unfortunately have to join the group. This just happened to me 4 hours ago and I have had no luck at getting any reaction out of my laptop or the ipod. Do any of the IT people for Apple or any of the programers not have any suggestions?!

Tecra A7: Some keyboard buttons fail to work

Hi,
all of a sudden the following keys on my Tecra A7 fail to work:
8 9 i o k l , . and the arrows down and right.
The first 8 are in a straight line downwards. Now using a USB External keyboard, but that won't fit in my bag when visiting clients.
Anyone has any idea what might be wrong?
Thanks,
Marc

Hello Marc,
your problem can be something simple (the connector of your keyboard needs to be reseated as it got loose), or in the worse case, the connecting film got broken (cut) and does not allow the signals to be forwarded to the mainboard. If you are still on warranty, you should prefer consulting Toshiba for a quote rather than trying to fix this on your own.
If you feel confident to do it on your own, lift the plastic cover above the keyboard and remove the two screws that are securing the keyboard (the screws are hidden below the plastic cover). Then you can reseat the "negative film alike" connector into its place.
Here is an example image of a removed keyboard showing the location of the two screws (top side) and the film-a-like connector (bottom):
http://tinyurl.com/2cufxd
Good luck,
regards
electrochain

My earphones mic and volume buttons don't work ever since the iOS 8.1 update! Please help me. One discussion person says they bought a new pair and THEY don't work either. What do I do? I'm about to have a breakdown!

I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!

Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work.

My Droid DNA's home, back, and app buttons no longer work or react when pressed. This happened randomly when I was using the phone Saturday afternoon and have since no longer worked. Can anything be done?

This is the second major problem I have had with this phone (first was the SIM card issue where I had no service because the software of the phone wouldn't read the SIM card, has been fixed by an update I downloaded in December).
I really would like to know what my options are, and if I am eligible to get a new phone. This has been by far the worst phone I have ever experienced and am disappointed that I am forced into a two year contract with a phone that has consistently failed me. I am a college kid who is going through job/phone interviews and it is very important that I can rely on my personal phone.

callahan.214,
If the home and back buttons are not working it has to be difficult to use the phone. Let's get that device working. Back up your phone and complete a reset: http://vz.to/1uBz20R . Before installing any applications test out the phone for a day to ensure it is working properly. Let us know how it is working.
BrianP_VZW
Follow Us on Twitter @VZWSupport

Samsung R580 , can't change brightness, a few buttons don't work

Hi,
Spent over 6 hours trying to find a solution, yet it's always on the highest brightness mode.
Couldn't find the monitor with lspci (don't know if it's possible anyway), here's the vga controller :
02:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0a29] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c06a]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at cc000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at ce000000 (64-bit, prefetchable) [size=32M]
I/O ports at 2000 [size=128]
[virtual] Expansion ROM at cd000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
I tried changing /proc/acpi/video/NVID/LCD/brightness but it didn't work.
http://aur.archlinux.org/packages.php?ID=36238 did actually turn the display on and off, though. Modifying the script didn't help and I don't know anything about kernel programming so it's not an option either.
On top of that, some of my "special" buttons won't work. Touchpad enable button works flawlessly and a few of them actually worked before I removed KDE to install Xfce (like volume control) and I can see them using xev so I'll fix it later, but those that change the brightness and turn the wireless on and off aren't recognized at all.
Any suggestions ?
Last edited by felace (2010-04-11 08:52:52)

Here's more information about the issue, in case it might prove useful :
Output of Xorg.0.log :
II) Apr 12 17:47:24 NVIDIA(0): NVIDIA GPU GeForce GT 330M (GT216) at PCI:2:0:0 (GPU-0)
(--) Apr 12 17:47:24 NVIDIA(0): Memory: 1048576 kBytes
(--) Apr 12 17:47:24 NVIDIA(0): VideoBIOS: 70.16.3f.00.ff
(II) Apr 12 17:47:24 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Apr 12 17:47:24 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Apr 12 17:47:24 NVIDIA(0): Connected display device(s) on GeForce GT 330M at PCI:2:0:0:
(--) Apr 12 17:47:24 NVIDIA(0): Seiko (DFP-0)
(--) Apr 12 17:47:24 NVIDIA(0): Seiko (DFP-0): 330.0 MHz maximum pixel clock
(--) Apr 12 17:47:24 NVIDIA(0): Seiko (DFP-0): Internal Dual Link LVDS
(II) Apr 12 17:47:24 NVIDIA(0): Assigned Display Device: DFP-0
(==) Apr 12 17:47:24 NVIDIA(0):
(==) Apr 12 17:47:24 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Apr 12 17:47:24 NVIDIA(0): will be used as the requested mode.
(==) Apr 12 17:47:24 NVIDIA(0):
(II) Apr 12 17:47:24 NVIDIA(0): Validated modes:
(II) Apr 12 17:47:24 NVIDIA(0): "nvidia-auto-select"
(II) Apr 12 17:47:24 NVIDIA(0): Virtual screen size determined to be 1366 x 768
(--) Apr 12 17:47:25 NVIDIA(0): DPI set to (102, 102); computed from "UseEdidDpi" X config
(--) Apr 12 17:47:25 NVIDIA(0): option
(==) Apr 12 17:47:25 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Apr 12 17:47:25 NVIDIA: Using 768.00 MB of virtual memory for indirect framebuffer
(II) Apr 12 17:47:25 NVIDIA: access.
(II) Apr 12 17:47:25 NVIDIA(0): Initialized GPU GART.
(II) Apr 12 17:47:25 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Apr 12 17:47:25 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Apr 12 17:47:25 NVIDIA(0): configuration option may not be set correctly. When the
(II) Apr 12 17:47:25 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Apr 12 17:47:25 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Apr 12 17:47:25 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Apr 12 17:47:25 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Apr 12 17:47:25 NVIDIA(0): Config Options in the README.
(II) Apr 12 17:47:25 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Apr 12 17:47:25 NVIDIA(0): enough to receive ACPI hotkey events.
(II) Apr 12 17:47:25 NVIDIA(0): ACPI brightness change hotkey events enabled.
(II) Apr 12 17:47:25 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
Also, there's an option to decrease brightness automatically when ac adapter is unplugged (via BIOS) : It's dimmer than it usually is , but by the time I start booting, it reverts back to full brightness (somewhere between "triggering udev" and "loadling modules").
Last edited by felace (2010-04-12 15:37:01)

HT4527 I want to move all my iTunes from old PC to new PC but Home Sharing on both and it works. At Step 11, I clicked Home Sharing Import button doesn't work.

Help! I want to move all my iTunes music, podcasts, etc. from an old PC to a new PC. I set up Home Sharing on both and it works. I followed the steps in http://support.apple.com/kb/HT4527 to the letter. At Step 11, I clicked on Home Sharing on my new PC, then Edit > Select All so I could then import everything to the new computer. No matter what I try, the Import button doesn't work. There are two buttons on the lower right hand side of the iTunes screen - one for Settings and one for Import. The Settings button is clickable but the Import button isn't even live. In other words, I can see it but not click on it. I have double-checked my firewall and it is not the problem. How can I get the Import button to work?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

I would like to use my work exchange email on my macbook pro. But I cannot insult it. I have not problem as on my iPhone or iPad. My work IT person does not know what is wrong.

I would like to use my work exchange email on my macbook pro. But I cannot install it. I have no problem my work email on my iPhone or iPad. My work IT person does not know what is wrong. Why I try to set up the email I get the message that it cannot connect to this server.

Try going into System Prefereces then Mail, Cintacts & Calendars then click on the Microsoft Exchange link on the right. Type in your email address and password and allow it to set it up automatically.
Make sure your Mac is updated to the newest version of Mail.
If that still fails then I suggest you switch email clients. I don't care for the built in mail program. IMHO it is very buggy.

Back button no longer works in some specific situations; also, it appears that clearing cache isn't working.

The "back" button no longer works in certain specific situations on certain specific websites -- especially on the very website on which I need to use it very frequently. This has been going on for a couple of weeks.
Also, I noticed today that the "clear cache now" command doesn't seem to be working. Formerly, when I cleared the cache, I had to re-login to those websites that normally "remember" my login (because clearing the cache erased that "memory") -- but today, after using the "clear cache now" command, those websites still "remember" my login, which leads me to believe the cache didn't get cleared. Is there any other way to check whether it got cleared?
I was attempting to clear the cache in the faint hope that this might help the above "back" button problem, as no one has yet given me a solution for this that has worked. One person suggested having Firefox re-create the possibly damaged "places.sqlite" and "places.sqlite-journal" files. I tried this, but there was no change to the problem.
I think this problem started around the time I had a few Firefox crashes while using YouTube and doing something else on the computer at the same time.
I just today learned about the "crash signature" -- how to look it up, and to include it in a forum question. However, the crash log did not show these recent crashes, only some others from a few months ago. So, I'm unable to show the crash signature for this.
I'm guessing there's a chance that upgrading to a newer version of Firefox might fix this problem -- but I hesitate to do that, because it occurs to me that it also may be possible that changing the program before fixing this might make it harder to fix. I don't have enough knowledge of this software to know which is more likely, and I don't like to try things at random, in ignorance of the possible results. Also, after reading today several other forum comments from people who are unhappy with their Firefox upgrades, I hesitate to upgrade for that reason, also.

Websites remembering you and automatically log you in is stored in a cookie.<br />
So you need to remove the cookies to make a website forget you.
* http://kb.mozillazine.org/Cookies

IChat video/audio fails to work

iChat video/audio fails to work 90% of the time. The error message says the other party failed to respond, or some other, similar, bogus "communication error" message.
Invitation to video or audio chat fails 100% of the time with certain buddies of mine, and anywhere from 50% to 90% of the time with others, regardless of whether they invite me or I invite them. Changing ISPs, Macs, locations, or static/dynamic IP settings has made no difference.
This problem surfaced with Tiger in the summer of 2007, and progressively became worse, especially since Leopard, to the point where iChat video/audio fails 100% of the time, unless the other user happens to be in the same [home] network.
All of a sudden the problem went away since the upgrade to 10.5.6, and I was able to again use iChat video to communicate with friends I have not been able to "see" in a year and a half! However, the problem started again today, with the same bogus "communication error" message every time a video connection attempt is made.
Screen Sharing also fails to work, 100% of the time, regardless of how it is invoked, through iChat or not, unless, again, it is attempted between 2 macs in the same home network.
In the meantime, Skype video works fine all the time.

Hi,
Thomson-Alcatel by default do what is called Binding of SIP to port 5060
This means ANY SIP data is forced to that port. iChat 4 no longer uses this port for SIP. It caused problems in iChat 2 and 3 which could be resolved when the firmware was Version 4 or earlier.
How do I know ?
Personal Experience from a Speedtouch 510v4 (running version 4.2.5 firmware)
Hence the web page I linked you to.
Built up from comments on the iChat 3 forum and the iChat 2 forum since 2004
Search Results for iChat 3 (it will only go back to about Nov 14th 2005 when the software Apple Uses to run the forums changed - some active threads did cross over this date so occasional ones are older)
Smaller results from iChat 2
The work by iBoise in this forum and the ADSLGuide's Apple Forum
Known issues for the BT HOME HUB in Britain as it is a Thomson-Alcatel inside.
Because the fix on Page 4a in the orignal link I gave, worked until Version 5 firmware came out.
As I clearly said the results can be intermittent.
With non Speedtouches it tends to be a 10:10:30 split out of 50 Buddies
10 you can get all the time.
10 now and then Buddies and
30 Never successful.
The Original Version 4 Telnet command would make this 100% successful to non Speedtouch devices
In Version 5 it becomes about 15:10:25 which only marginally better.
Later versions of the firmware do not even seem to reach these figures.
Speedtouch to Speedtouch connections are better but still not 100%
I would guess you live some where where Speedtouch's are popular and have many Speedtouch to Speedtouch connections that fair slightly better than average.
Last time I had contact with iBoise on this the Firmware was at version 7 and he was in the process of evaluating it for any changes.
There has been no announcement. In this case I don't think No News is Good News.
I hope this helps.
10:42 PM Wednesday; January 21, 2009

How to control volume during call when hard buttons don't work?

I was wondering if there is another way to increase the volume during a call when the hard + volume button does not work. Only the - volume button works. Is there possibly an on screen volume button or another screen I can go to for in call volume control. While on a call using the speaker, the volume is so low I can barely hear the person I'm talking to but I can't increase the volume anywhere. Please help! It's so frustrating when you're using the speaker phone and you can't hear anything. What's the point?? I also decreased the volume on a regular call while testing the buttons and now that's so low I can't hear that way either. Help!

Double-click the Home button, swipe the icons at the bottom of the screen to the right twice and it should show a volume slider. Adjust the volume then press the Home button.

My screen brightness control buttons don't work windows 8

my screen brightness control buttons don't work?
the light in the mute button is always on when NOT on mute?
Have set up Win8 3 TIMES but get always same bug agan
Hope someone can help

Hello smarisig. I understand you are not able to control screen brightness from the keyboard on Windows 8. By chance, did you upgrade to Windows 8 from Windows 7? I have located an online forum that contains troubleshooting on this issue: http://thedailybuggle.com/forum/unable-control-screen-brightness-windows-8-a-200.html
The person who posted the issue on this forum had upgraded from Windows 7 to Windows 8, and then this issue occurred. That is the reason I asked if this Windows 8 was upgraded. Regardless, follow the troubleshooting presented and it could resolve the issue for you. If not, let me know and I will continue to research the issue in the meantime. I'm only here to help!
Mario
I worked on behalf of HP.

ALV button fails to work in PERSONAS 2.0

Similar Messages

Maybe you are looking for