ALV display Variant
hi,
I wrote a code for allowing the user to choose a display variant in the selection screen. The user chooses the required variant in the selection screen and views the ALV grid accordingly. This code is working fine in the development server but as it was transported to the quality server, somehow it has stopped working.
Any new variants that are created are displayed in the selection screeN F4 help, but somehow the variants are not working.
Could anyone suggest where i am going wrong?
Thanks,
Aviroop
try to comment it and see./
it will work..
you are telling that alv Fm set the default variant.
if you don't want then comment it, then what ever you choose in selection screen will come in the output otherwise defaut variant overrides the selected one.
Regards
vijay
Similar Messages
-
ALV Display Variant copying between programs
There is a report program say PROGRAM1 whose ALV display variants we want to copy to the ALV display variants of another program say PROGRAM2.
Both these program share the same ALV output structure design. My questions are
1) Can the display variants of an ALV be copied into another program.?
2) Can this be managed programatically?Hi,
Try using LVC_VARIANT_SELECT and LVC_VARIANT_SAVE fms.
First call LVC_VARIANT_SELECT to read variant from the first program and then call LVC_VARIANT_SAVE to save it for the second program.
Take a look at report BCALV_GRID_11 for reference
Sri
Message was edited by: Srikanth Pinnamaneni -
Copying ALV Display Variants between different programs
Is there a way to copy the ALV Display Variants from one program to another? I am NOT referring to selection screen variants.
An SAP standard program was copied to a Z program. Some changes were made to the logic. The original SAP program has many (100+) ALV Display Variants. I do not want to manually re-create them. Is there a way to copy these from one program to another (without using a custom program to manipulate the tables)?
Thanks.
NormHi norman,
even i was thinking the same while you passing the alv parameter is_variant, give the the program which is having 100 variants.
is_variant-REPORT = 'STANDARDPRG'.
this will import all varaints from it, but when you save any new one it will save in the same standard program.
regards
vijay -
Copy User Specific ALV Display Variants
Does anyone know if it is possible to copy one user's ALV display variant (that has been saved as a user-specific variant) for a particular program (in this case VA05) to another user?
Hi Eric,
I'm a bit busy now and I cannot give you a complete solution, but sure can give you some c(l)ue. Just see if you have some success. If you do not, then i wuill get back to you later.
Refer to the follwoing SAP Tables and see if you have some luck.
==========================================================
LTDX --> Generic storage of display variants
LTDXD --> Default display variants
LTDXS --> SAP Default Display Variants
LTDXT --> Display variant texts
==========================================================
The idea is to try and manipulate the table entries for various users.
Regards,
Anand Mandalika. -
Problem in saving ALV display variant with filter
Hello,
I'm displaying an ALV grid with function 'REUSE_ALV_GRID_DISPLAY'. When I load a diplay variant and apply a filter, I could save new layout. But when I run the report without a display variant, then apply a filter to the result, I couldn't save filter option when saving display variant. In the "save" tab of save layout dialog, filter checkbox is not displayed. This happens in 4.6C version. Is it a bug or am i missing a point.
Thanks,
Mustafa.Slm Burak,
'IT_FILTER' parameter is empty. Users apply a filter but couldn't save filtered list variant. When they run the report with saved display variant, list is displayed without filters. -
Select OO ALV Display Variants in a Sel Screen.
Hi, Abapers.
I'm wondering whether is possible to make a selection (in a sel-screen) over a field of the display variants which are further managed in an OO ALV.
If it's possible, from where shoud I read them?
Best regards.what do you means with "managed"?
what do you think to do with the selected field? -
OOPs : SAVE and ALV Display Variant
Can you please send me the code for 'Save and Display Variant' in ALV OOPs.
DATA : l_layout TYPE disvariant.
l_layout-report = sy-repid.
l_layouth-zebra = 'X'.
CALL METHOD gr_alvgrid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
i_structure_name = 'ZQM01'
<b> is_variant = l_layout
i_save = 'A'</b>
I_DEFAULT = 'X'
is_layout = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_list[]
it_fieldcatalog = gt_fieldcat
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to transport display variants in alv
Hi,
Can any one please help me in transporting alv display variants?Actually I have transported the variants ,but only selection variants are getting transported.I want to transport ALV display variants accross the clients.
Please reply soon.It is very urgent.Hi,
Please use the following :
First execute the report .
Then Menubar Settings> Layout> layout management>select your variant> menubar layout--> transport
This will work only when your variant management is activve in your ALV report. -
Hi,
I copied an existing Z report program to a new program to conform to the naming standards and deleted the old program. (I could do renaming as well but did it this way)
When copying the program, all object including the selection variants were copied but the ALV display variants were not copied to the target program. Any thoughts on this please?
I tried using a simple program to copy the LTDX (Generic storage of display variants) and LTDXT (Display Variant Texts) entries of the old program to the new program. I checked that all entries in LTDX of the old program now exist for the new program too. When I execute the program, only the global ALV display variants are available for selection i.e all display variants that start with u2018/u2019. The user specific variants are not available although all entries in LTDX and LTDXT for the user display are in the respective tables
Thanks for respondinding.Thanks Satyasuresh. I used a similar program that copies variant entries from tables ltdx and ltdxt for a source program to new entries in the same table for the target program.
parameters report like ltdx-report obligatory.
parameters report2 like ltdx-report obligatory.
select * into table lt_ltdx from ltdx
where report = report.
select * into table lt_ltdxt from ltdxt
where report = report.
loop at lt_ltdx.
lt_ltdx-report = report2.
modify ltdx from lt_ltdx..
endloop.
loop at lt_ltdxt.
lt_ltdxt-report = report2.
modify ltdxt from lt_ltdxt..
endloop. -
Hi ,
i have developed an interactive report in which form the first grid display i will move to the second grid display.
Problem:
For the first list there is an display variant. when i navigate to the second list it is using the same display variant form the first list ( this should not hapen ). so many of the fields are not be displayed in the second list.
Is there any way to differentiate the display variant from first and second list.
Please help me. sample code will be more helpful.
Patilhi santhosh
You can very well create 2 variants in your report for grid display...just restrict some fields n create 2 variants and while executing jus choose which variant you need to run..
REWARD IT IF USEFUl...!!!! -
ALV layout variant missing in background job.
hi guys,
Having problem on getting the default ALV layout variant when run the job in backgorund. Please advise any correction needed in the following code.
Thanks.
*& Include Z_MM_KBR_AGSUBCONINV_MOD2 *
MODULE status_0100 OUTPUT.
SET PF-STATUS '100'.
SET TITLEBAR '100'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module display_data OUTPUT
text
MODULE display_data OUTPUT.
IF sy-batch IS INITIAL. "Foreground
IF w_container IS INITIAL.
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
*Creating the container
CREATE OBJECT w_container
EXPORTING
container_name = c_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
*Creating the ALV GRID
CREATE OBJECT w_grid
EXPORTING
i_parent = w_container
i_appl_events = c_check
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
else.
exit.
ENDIF.
ELSE.
*Creating the ALV GRID
CREATE OBJECT w_grid
EXPORTING
i_parent = go_dock_container
i_appl_events = c_check
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
WRITE:/ 'Error in grid'.
ENDIF.
CREATE OBJECT w_grid
EXPORTING i_parent = go_dock_container.
ENDIF.
*getting the variant option
wa_variant-report = sy-repid.
wa_variant-username = sy-uname.
wa_layout-grid_title = sy-title.
wa_layout-cwidth_opt = c_check.
wa_layout-zebra = c_check.
wa_layout-no_f4 = c_check.
wa_layout-sel_mode = 'D'.
*Excluding the unwanted buttons
PERFORM exclude_toolbar_buttons.
build field catalog.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_buffer_active = c_check
i_structure_name = c_fcat_str
i_bypassing_buffer = c_check
CHANGING
ct_fieldcat = t_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
loop at t_fieldcat into w_fieldcat.
if w_fieldcat-FIELDNAME = 'AGING1'.
W_FIELDCAT-NO_ZERO = 'X'.
MODIFY t_fieldcat FROM W_FIELDCAT INDEX SY-TABIX.
ENDIF.
endloop.
Generate sort critria
PERFORM generate_sort.
Create object of class lcl_event_receiver.
CREATE OBJECT w_event.
Handler for events.
SET HANDLER w_event->handle_top_of_page FOR w_grid.
SET HANDLER w_event->handle_print_top_of_page FOR w_grid.
SET HANDLER w_event->handle_print_end_of_list FOR w_grid.
SET HANDLER w_event->handle_hotspot_click FOR w_grid.
*Displaying the alv
IF NOT sy-batch IS INITIAL.
PERFORM create_snp.
ENDIF.
t_data = i_final.
CALL METHOD w_grid->set_table_for_first_display
EXPORTING
i_save = 'A'
is_layout = wa_layout
is_variant = wa_variant
CHANGING
it_outtab = t_data
it_fieldcatalog = t_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
ENDMODULE. " display_data OUTPUT
*& Module user_command_0100 INPUT
text
MODULE user_command_0100 INPUT.
DATA: lt_rows TYPE lvc_t_row,
w_rows TYPE lvc_s_row.
CASE sy-ucomm.
WHEN c_back.
LEAVE TO SCREEN 0.
WHEN c_exit.
LEAVE TO SCREEN 0.
WHEN c_cancel.
LEAVE TO SCREEN 0.
WHEN 'BILDET'.
CALL METHOD w_grid->get_selected_rows
IMPORTING
et_index_rows = lt_rows.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc EQ 0.
READ TABLE lt_rows INTO w_rows INDEX 1.
READ TABLE i_vbfa INTO w_vbfa INDEX w_rows-index.
IF sy-subrc EQ 0.
CLEAR i_zbw_br_nf4.
LOOP AT i_zbw_br_nf3 INTO w_zbw_br_nf3 WHERE
refkey = w_vbfa-v_vbeln.
APPEND w_zbw_br_nf3 TO i_zbw_br_nf4.
ENDLOOP.
call dialog screen and display new alv control
CALL SCREEN 101 STARTING AT 10 5.
ENDIF.
ENDIF.
WHEN 'NOTAF'.
CALL METHOD w_grid->get_selected_rows
IMPORTING
et_index_rows = lt_rows.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc EQ 0.
READ TABLE lt_rows INTO w_rows INDEX 1.
READ TABLE i_zbw_br_nf3 INTO w_zbw_br_nf3 INDEX w_rows-index.
DATA docnum LIKE j_1bdydoc-docnum.
docnum = w_zbw_br_nf3-docnum.
SET PARAMETER ID 'JEF' FIELD docnum.
CALL TRANSACTION 'J1B3N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDMODULE. " user_command_0100 INPUT
*& Form modify_col_name
text
-->P_<FCAT> text
-->P_TEXT_H01 text
FORM modify_col_name USING pwa_fcat TYPE lvc_s_fcat
value(pw_text) TYPE any.
pwa_fcat-coltext = pw_text.
pwa_fcat-scrtext_l = pw_text.
pwa_fcat-scrtext_m = pw_text.
pwa_fcat-scrtext_s = pw_text.
ENDFORM. " modify_col_name
FORM display_hotspot *
FORM display_hotspot USING pw_row_id TYPE lvc_s_row
pw_column_id TYPE lvc_s_col.
FIELD-SYMBOLS <l_data> TYPE zbrforecast.
READ TABLE t_br_nf_acum ASSIGNING <l_data> INDEX pw_row_id-index.
CHECK sy-subrc = 0.
IF pw_column_id = ' '.
ENDIF.
ENDFORM. "display_hotspot
*& Form generate_sort
Genereate Sort criteria
FORM generate_sort.
Local variables
DATA: wal_sort TYPE lvc_s_sort,
wl_pos TYPE numc2.
wl_pos = 01.
sort ORDER
wal_sort-spos = wl_pos.
wal_sort-fieldname = c_aufnr.
wal_sort-up = c_check.
APPEND wal_sort TO t_sort.
ENDFORM. "generate_sort
*& Form f4_variant
text
<--PW_VARI text
FORM f4_variant CHANGING pw_vari TYPE disvariant-variant.
wa_variant-report = sy-cprog.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = wa_variant
i_save = c_u
IMPORTING
es_variant = wa_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc IS INITIAL.
pw_vari = wa_variant-variant.
ELSE.
MESSAGE s208(00) WITH text-t04.
ENDIF.
ENDFORM. " f4_variant
*& Form validate_layout
*This subroutine is to validate the layout
No parameters are passed to this subroutine
FORM validate_layout.
IF NOT p_layout IS INITIAL.
Check Layout
wa_variant-report = sy-repid.
wa_variant-username = sy-uname.
wa_variant-variant = p_layout.
CALL FUNCTION 'LVC_VARIANT_EXISTENCE_CHECK'
EXPORTING
i_save = c_u
CHANGING
cs_variant = wa_variant
EXCEPTIONS
OTHERS = 01.
IF NOT sy-subrc IS INITIAL.
SET CURSOR FIELD 'P_LAYOUT'.
MESSAGE s001(00) WITH text-t06 p_layout.
STOP.
ENDIF.
ELSE.
clear wa_variant.
ENDIF.
ENDFORM. " validate_layout
*& Form validate_data
text
FORM validate_data .
PERFORM validate_layout.
ENDFORM. " validate_dataHi,
Before the call to method set_table_for_first_display, populate
wa_variant-report = sy-repid.
Best regards,
Prashant -
Page-break in alv background job for alv output variant not coming correctl
Hi,
I have created an ALV grid report. When i run the report in background i get the output with correct page-break on FIELD1. Now when i run the report in background with an "ALV output variant" (its the ALV variant that controls the fields display in the output; this is not the program variant), i do not get the page-break on FIELD1. I have already build the sort criteria and using:
gs_sort-group = '* '. "New-Page
Please let me know what could be reason for not getting the page-break in background when i am using the alv output variant and how do i correct this problem.
Regards,
RakeshHello Everyone,
I have solved the problem. While running the program in background, we get the page-breaks when we use the below part of code in the sort catalogue with the condition that the program variant should not use any ALV layout variant.
gs_sort-group = '* '. "New-Page
If you are using the ALV layout variant in the program variant then we can check the ROWPOS, COLPOS, and NO_OUT for that ALV layout variant and pass them along in the fieldcatalog table. You should be careful with not to pass the layout variant in the DISVARIANT. You can notice that i have cleared it and simply passing the program name into that.
*C-- Process separately for jobs running in Background. Actually
*C-- sortcat-group solves the problem only in Foreground. In background
*C-- when ALV layout variant is not selected then it works otherwise it
*C-- fails. So for background jobs we are reading the fieldcat and then
*C-- passing the same in the display FM.
IF sy-batch = 'X'.
CALL FUNCTION 'REUSE_ALV_VARIANT_SELECT'
EXPORTING
i_dialog = ' '
i_user_specific = ' '
i_default = ' '
* I_TABNAME_HEADER =
* I_TABNAME_ITEM =
it_default_fieldcat = gt_fieldcat
i_layout = gs_layout
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
IMPORTING
* E_EXIT =
et_fieldcat = lt_fieldcat
* et_sort = gt_sort[]
* ET_FILTER =
* es_layout = gs_layout
CHANGING
cs_variant = gs_disvariant
EXCEPTIONS
wrong_input = 1
fc_not_complete = 2
not_found = 3
program_error = 4
OTHERS = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR gs_fieldcat.
LOOP AT gt_fieldcat INTO gs_fieldcat.
*C-- Transfer all position changes to gt_fieldcat from lt_fieldcat
CLEAR ls_fieldcat.
READ TABLE lt_fieldcat
INTO ls_fieldcat
WITH KEY fieldname = gs_fieldcat-fieldname.
IF sy-subrc = 0.
gs_fieldcat-row_pos = ls_fieldcat-row_pos.
gs_fieldcat-col_pos = ls_fieldcat-col_pos.
gs_fieldcat-no_out = ls_fieldcat-no_out.
MODIFY gt_fieldcat FROM gs_fieldcat INDEX sy-tabix.
CLEAR gs_fieldcat.
ENDIF.
ENDLOOP.
*C-- Clear the disvariant for the background job as it contains the ALV
*C-- layout varinat
CLEAR gs_disvariant.
gs_disvariant-report = 'ZGPPMP0001'.
Then pass gt_fieldcat to 'REUSE_ALV_GRID_DISPLAY'.
The reason i'm doing it this way is that when we pass the layout variant name, the contents in gt_fieldcat were getting modified.
One more thing i'd like to point out is that that, i tried to delete the fields with no_out = 'x'. Now when i ran the program in background with all the fields in sort catalog (suppose there are 2 fields field1 and field2) also in fieldcatalog it ran fine. In the next run in background i removed one of the fields in sort catalog from the fieldcatalog (delete the fields with no_out = 'x') and i got dump. Basically i had hidden field1 and so the code which was deleting fields with no_out = 'x' deleted this field from gt_fieldcat. So basically we should not delete fields with no_out = 'x'.
I was getting ABAP runtime errors MESSAGE_TYPE_X in the following part of the standard code.
000310 LOOP AT CT_SORT INTO LS_SORT.
000320
000330 READ TABLE IT_FIELDCAT ASSIGNING <LS_FIELDCAT>
000340 WITH KEY FIELDNAME = LS_SORT-FIELDNAME BINARY SEARCH.
000350 IF SY-SUBRC NE 0.
> MESSAGE X000(0K).
000370 ENDIF.
000380
000390 LS_SORT-SELTEXT = <LS_FIELDCAT>-SELTEXT.
i have just mentioned this part because when i checked the forum many people were getting such errors "MESSAGE_TYPE_X". This could also be one of the reasons. -
How to get the fields in a display variant
Hello gurus,
I have created variants for an ALV display that I can select on my selection. This works fine.
Now I need to know during the execution of the program what are the fields that have been selected in the display variant so that I can export the selected fields in an excel sheet that I send by mail. The file is currently being sent with all the possible fields .
Is there a module function that allows the program to know which field is present in the display variant?
Thanks,
ParvezHi,
Try these: REUSE_ALV_VARIANT_DEFAULT_GET.
REUSE_ALV_VARIANT_F4.
.also see the link for more Details:
http://www.abapcode.info/2008/09/selecting-variants-for-initial-alv-list.html.
Hope it helps.
Regards,
Rahul -
ALV display for row s and columns in this format.have ur full points..
Hi ALL
I have to dispalay data in the ALV format as :
Basic
DA
HRA
PF
VPF
20000
500
5000
| 1500 | 600 | |
Details : Basic HRA in one Row and PF , VPF in second Row.
The Amount regarding htese fields are also displayed in the next rows for all emp. numbers.
its urgent for me and need helpful answers...
Regards
Lakhansee the attached code it will display the hierarchial display as per your need
change the internal tables with dat of your own orgn structure and pass it to the fun module.
Description : Pick Status Report
This is an ALV report using the heirarchical ALV list display. The
report selects all deliveries that fulfil the selection criteria
and displays a summary of all items in that delivery with reference
to certain statuses: overall status, goods issue status, transfer
order status, load to pallet status, pallet count status, loaded to
van status, van manifest printed status and end of day manifest
printed status. These statuses have been defined by the business.
There is extra functionality required to trigger printing of the van
and end of day manifests from this report, and to set the loading
end status of a shipment if the last handling unit of a particular
shipment has been loaded onto a van for which the van manifest has
been triggered.
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
*{ INSERT UKMK900355 4
zhu_to_link, "AS03
*} INSERT
zpallettr,
vttk, "MB01
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel, "RM050906
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor, "MB01
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route, "MB01+
zzexproute LIKE likp-zzexproute, "MB01+
zzroute2 LIKE likp-zzroute2, "MB01+
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE, "ANV SR#11523
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03
ELSE. "AS03
t_data_tab-lvsta = 'C'. "AS03
ENDIF. "AS03
ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
INTO (t_data_tab-zpallet_no, "Jvdm01-
t_data_tab-zcount_check) "Jvdm01-
WHERE exidv EQ w_vekp-exidv. "Jvdm01-
PERFORM read_pallet. "MB01+
SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
FROM zpallettr "Jvdm01+
INTO (t_data_tab-zpallet_no, "Jvdm01+
t_data_tab-zcount_check, "Jvdm01+
t_data_tab-zdep_point) "Jvdm01+
WHERE exidv EQ w_vekp-exidv. "Jvdm01+
WHERE exidv EQ w_vekp-exidv "MB01-+
AND zpallet_id = t_data_tab-lgtor."MB01+
MB01 - INSERT START
If pallet number specified and
we are in the global route scenario & both doors fall within the
selection criteria, we need to copy the one that is currently in a
specified pallet
IF NOT s_palno IS INITIAL AND not t_data_tab-zpallet_no in s_palno
AND w_routetype = '3' .
Switch doors & get 2nd shipment
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
Read subsequent leg shipment
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
IF sy-subrc = 0.
MOVE w_vttp-tknum TO t_data_tab-tknum.
ENDIF.
PERFORM read_pallet. "MB01+
ENDIF.
MB01 - INSERT END
IF NOT t_data_tab-zpallet_no IN s_palno. "TR01+
CONTINUE. "TR01+
ENDIF. "TR01+
IF sy-subrc = 0. "mb01+
perform read_van. "MB01+
SELECT SINGLE zvan_no zvan_print zeod_print FROM zvantr
INTO (t_data_tab-zvan_no,
t_data_tab-zvan_print,
t_data_tab-zeod_print)
WHERE zpallet_no EQ t_data_tab-zpallet_no.
MB01 - INSERT START
If van number specified and
we are in the global route scenario & both doors fall within the
selection criteria, we need to copy the one that is currently on a
specified van
IF NOT s_vanno IS INITIAL AND not t_data_tab-zvan_no in s_vanno AND
w_routetype = '3' .
Switch doors & get 2nd shipment
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
Read subsequent leg shipment
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
IF sy-subrc = 0.
MOVE w_vttp-tknum TO t_data_tab-tknum.
ENDIF.
PERFORM read_pallet. "MB01+
perform read_van.
ENDIF. "mb01-
MB01 - INSERT END
IF NOT t_data_tab-zvan_no IN s_vanno. "TR01+
CONTINUE. "TR01+
ENDIF. "TR01+
ENDIF.
APPEND t_data_tab.
ENDLOOP.
*-----> TR01+ start
If the delivery has yet to be packed, then need to include in report
Thus delete t_lips here and if any entries left after looping through
t_vepo, these will also need to be added to t_data_tab
if the selection is by handling unit though we do not want
these"TR03+
IF s_exidv IS INITIAL. "TR03+
*{ REPLACE UKMK900355 1
*\ LOOP AT it_vepo.
*\ READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
*\ posnr = it_vepo-posnr
*\ BINARY SEARCH. "SUM
*\ IF sy-subrc = 0.
*\ DELETE it_lips INDEX sy-tabix.
*\ ENDIF.
*\ ENDLOOP.
Higher-level HUs can contain more than one delivery item " AS01
LOOP AT it_lips. " AS01
READ TABLE t_vepo_low WITH KEY vbeln = it_lips-vbeln " AS01
posnr = it_lips-posnr. " AS01
CHECK sy-subrc EQ 0. " AS01
DELETE it_lips. " AS01
ENDLOOP. " AS01
*} REPLACE
IF NOT it_lips[] IS INITIAL.
move any unpacked items to the data table
PERFORM move_lips_to_table.
ENDIF.
ENDIF. "TR03+
*<---- TR01+ End
get relevant status icons
PERFORM select_icons.
prepare ALV data
PERFORM prepare_alv.
ENDFORM. " select_data
*& Form select_icons
select icons for display and move data to display table
FORM select_icons.
DATA: w_disp_tab LIKE zpickdisp,
w_disp_head LIKE zpickhead,
w_color LIKE zpickdisp-color,
ov_icon LIKE zpickdisp-ov_icon,
gi_icon LIKE zpickdisp-gi_icon,
to_icon LIKE zpickdisp-to_icon,
lp_icon LIKE zpickdisp-lp_icon,
pc_icon LIKE zpickdisp-pc_icon,
lv_icon LIKE zpickdisp-lv_icon,
vm_icon LIKE zpickdisp-vm_icon,
em_icon LIKE zpickdisp-em_icon,
sp_icon LIKE zpickdisp-sp_icon, " ANV SR#11523
t_ovst_tab LIKE t_disp_tab WITH HEADER LINE.
CONSTANTS: c_col1(3) VALUE 'C10',
c_col2(3) VALUE 'C20'.
SORT t_data_tab BY lgtor vbeln.
w_color = c_col2.
LOOP AT t_data_tab.
AT NEW lgtor.
fill ALV header table
CLEAR w_disp_head.
w_disp_head-lgtor = t_data_tab-lgtor.
APPEND w_disp_head TO t_disp_head.
ENDAT.
goods issue status & overall amber/green only
CASE t_data_tab-wbstk.
WHEN c_c.
MOVE icon_green_light TO gi_icon.
MOVE icon_green_light TO ov_icon.
WHEN OTHERS.
MOVE icon_red_light TO gi_icon.
MOVE icon_yellow_light TO ov_icon.
ENDCASE.
transfer order status
CASE t_data_tab-lvsta.
WHEN c_a.
MOVE icon_red_light TO to_icon.
WHEN c_b.
MOVE icon_yellow_light TO to_icon.
WHEN c_c.
MOVE icon_green_light TO to_icon.
WHEN space.
write N/A
to_icon = 'N/A'.
ENDCASE.
loaded to pallet status
IF NOT t_data_tab-zpallet_no IS INITIAL.
MOVE icon_green_light TO lp_icon.
ELSE.
MOVE icon_red_light TO lp_icon.
ENDIF.
pallet count status
IF NOT t_data_tab-zcount_check IS INITIAL.
MOVE icon_green_light TO pc_icon.
ELSE.
MOVE icon_red_light TO pc_icon.
ENDIF.
loaded to van status
IF NOT t_data_tab-zvan_no IS INITIAL.
MOVE icon_green_light TO lv_icon.
ELSE.
MOVE icon_red_light TO lv_icon.
ENDIF.
van manifest status
IF NOT t_data_tab-zvan_print IS INITIAL.
MOVE icon_green_light TO vm_icon.
ELSE.
MOVE icon_red_light TO vm_icon.
ENDIF.
Start of changes by ANV SR#11523
Shipment status
IF NOT t_data_tab-tknum IS INITIAL.
MOVE icon_green_light TO sp_icon.
ELSE.
MOVE icon_red_light TO sp_icon.
ENDIF.
End of changes by ANV SR#11523
end of day manifest status
IF NOT t_data_tab-zeod_print IS INITIAL.
MOVE icon_green_light TO em_icon.
ELSE.
MOVE icon_red_light TO em_icon.
ENDIF.
move working data table to display table
MOVE-CORRESPONDING t_data_tab TO w_disp_tab.
w_disp_tab-ov_icon = ov_icon.
w_disp_tab-gi_icon = gi_icon.
w_disp_tab-to_icon = to_icon.
w_disp_tab-lp_icon = lp_icon.
w_disp_tab-pc_icon = pc_icon.
w_disp_tab-lv_icon = lv_icon.
w_disp_tab-vm_icon = vm_icon.
w_disp_tab-em_icon = em_icon.
w_disp_tab-sp_icon = sp_icon. "ANV SR#11523
w_disp_tab-color = w_color.
fill N/A values for initial fields for display
IF w_disp_tab-packvorschr IS INITIAL.
w_disp_tab-packvorschr = 'N/A'.
ENDIF.
IF w_disp_tab-exidv IS INITIAL.
w_disp_tab-exidv = 'N/A'.
ENDIF.
IF w_disp_tab-zpallet_no IS INITIAL.
WRITE 'N/A' TO w_disp_tab-zpallet_no.
ENDIF.
IF w_disp_tab-zvan_no IS INITIAL.
WRITE 'N/A' TO w_disp_tab-zvan_no.
ENDIF.
display different color for new doc number
AT END OF vbeln.
IF w_color = c_col1.
w_color = c_col2.
ELSEIF w_color = c_col2.
w_color = c_col1.
ENDIF.
ENDAT.
APPEND w_disp_tab TO t_disp_tab.
CLEAR w_disp_tab.
ENDLOOP.
we have all the icons in display but need to check the overall status
as this refers to the line items
green and amber statuses already set and use the same criteria as the
goods issue status unless detected as red here
DATA: ov_stat_red(1).
CLEAR w_disp_tab.
SORT t_disp_tab BY vbeln.
LOOP AT t_disp_tab INTO w_disp_tab.
AT NEW vbeln.
check all line items for delivery
LOOP AT t_data_tab WHERE vbeln = w_disp_tab-vbeln.
IF t_data_tab-lvsta = c_a.
set overall status to red
ov_stat_red = c_yes.
EXIT.
ELSE.
leave green/amber status icon as previosly determined
ENDIF.
ENDLOOP.
IF ov_stat_red = c_yes.
set overall status to red for all items in that delivery
CLEAR ov_stat_red.
MOVE icon_red_light TO w_disp_tab-ov_icon.
MODIFY t_disp_tab FROM w_disp_tab TRANSPORTING ov_icon
WHERE vbeln = w_disp_tab-vbeln.
ENDIF.
ENDAT.
ENDLOOP.
ENDFORM. " select_icons
*& Form fill_layout
fill ALV layout parameters
FORM fill_layout.
CLEAR g_layout.
g_layout-colwidth_optimize = c_yes. " column width optimisation
g_layout-zebra = space. " alternate line colors
g_layout-box_fieldname = 'MARK'. " checkbox fieldname
g_layout-info_fieldname = 'COLOR'. " highlight row indicator
g_layout-no_vline = space. " vertical line
g_layout-key_hotspot = space. " hotspot field
g_layout-f2code = 'PICK'. " F2 ok_code
g_layout-numc_sum = c_yes. " sum numc fields
g_layout-box_tabname = 't_disp_head'. " checkbox table name
g_layout-expand_fieldname = 'EXPAND'. " expand field name
ENDFORM. " fill_layout
*& Form fill_sort
fill ALV sort table
FORM fill_sort.
DATA: w_g_sort TYPE slis_sortinfo_alv.
w_g_sort-spos = 1.
w_g_sort-fieldname = 'LGTOR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
w_g_sort-spos = 2.
w_g_sort-fieldname = 'VBELN'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
w_g_sort-spos = 3.
w_g_sort-fieldname = 'POSNR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort. -
Hi ,
I am making ALV Report. I am displaying 4 similar ALV grids in a screen.
I would like to know how to give them some names so that they can be distinguished from each other by there name.
Pls help .Hi Jaison,
the easiest way to achive this, is to do the subtotaling with or without detailed lines by changing the ALV variant when in display.
When you save the ALV layout(variant), in the popup you have a "Save with" tab. There is "Breakdwn to totals lvl:" entry. You ca select the level of sum displayed.
After saving layout variant, you can pass it depending on users input in structured parameter IS_VARIANT. Yo need to fill report field with report name and variant with layout name.
Best is, to have a layout selection parameter. In Initialization, fill it using FM REUSE_ALV_VARIANT_DEFAULT_GET, AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_layout, use REUSE_ALV_VARIANT_F4.
This makes your report far more flexible.
Regards,
Clemens
Maybe you are looking for
-
Best approach for setting up iCloud for a child
Hi, I have bought my son an iPad Air for his birthday. We already have an iMac in the house which is shared by us all, with each person having their own login. My original question was going to be how I can create an iCloud login for him. I tried cre
-
Hi One & All While we are working on Delegate(provider) for JAXWS client handler in Weblogic10 , we have some technical issues and need some assistance. Problem Description In OUTBound of a provider, how can we stop the provider invoking its endpoint
-
Cursor move event dicrease frequency
Hello! A long time ago I remember I saw a forum post or a community doc, where it was explained how to decrease a certain Event to be triggered too frequently. I have a graph with a cursor, and when the user starts to move the cursor, I do some minor
-
I've created a menu module as normal at forms 9i once i ran it , I got the follwoing error : Error opening Oracle*Terminal file fmrweb. Any idea to overcome this error? Thanks in advance
-
Best way to upgrade from FCS2 to FCS3?
I will assume others may ask this, so hopefully this can help others. I will be purchasing FCS3 when it is available, and currently have FCS2 installed. I will not erase my drive and start over fresh just to install the software. I think for me the b