ALV ERROR in Function Module Fieldcatlog Merge .
Hi
I have added 2 more fileds in internral table . this is alv report there is no syntax error .
i have user function module
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = w_repid
i_internal_tabname = 'T_BSIK'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = w_repid
i_bypassing_buffer = 'X'
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = T_FIELDCAT
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT t_fieldcat INTO wa_fieldcat.
CASE wa_fieldcat-fieldname.
WHEN 'ZFBDT'.
wa_fieldcat-key = ''.
wa_fieldcat-reptext_ddic = 'Net Due Dt.'.
wa_fieldcat-seltext_l = 'Net Due Dt.'.
wa_fieldcat-seltext_m = 'Net Due Dt.'.
wa_fieldcat-seltext_s = 'Net Due Dt.'.
WHEN 'KUNNR'.
IF p_kunnr IS INITIAL.
wa_fieldcat-no_out = 'X'.
ENDIF.
WHEN 'LIFNR'.
IF NOT p_kunnr IS INITIAL.
wa_fieldcat-no_out = 'X'.
ENDIF.
WHEN 'SHKZG'.
wa_fieldcat-no_out = 'X'.
WHEN 'ZBD1T'.
wa_fieldcat-no_out = 'X'.
WHEN 'BELNR'.
wa_fieldcat-key = 'X'.
WHEN OTHERS.
wa_fieldcat-key = ''.
ENDCASE.
MODIFY t_fieldcat FROM wa_fieldcat.
ENDLOOP.
I am getting error on that.
ERROR is :
The Internal table "\UNCTION= K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" IS 72 CHARACTERS Wide
.the program line is 79 characters wide.
Thanks
Chandra
Hi Chandra,
For ALV reports the length should not be greater than 72. (please change the same)
You can also achive the same
Goto SE38
Open your program in edit
Utilities --> Settings --> Set "Downwards-Comp Line Length" falg to X and save. (This wil auotmatically set ur code to 72 chars)
Hope this helps,
Nag
Similar Messages
-
ALV Tree using Function Modules
Hi,
I want a simple example of ALV Tree using Function Modules which can display multiple Columns in the Hierarchically arranged fashion along with nodes & icons.
Also should be able to handle the events.
Thanks in Advance..Hi Ramesh,
Here is a example of alv tree
*& Report BCALV_TREE_DEMO *
report bcalv_tree_demo.
class cl_gui_column_tree definition load.
class cl_gui_cfw definition load.
data tree1 type ref to cl_gui_alv_tree.
data mr_toolbar type ref to cl_gui_toolbar.
include <icon>.
include bcalv_toolbar_event_receiver.
include bcalv_tree_event_receiver.
data: toolbar_event_receiver type ref to lcl_toolbar_event_receiver.
data: gt_sflight type sflight occurs 0, "Output-Table
gt_fieldcatalog type lvc_t_fcat, "Fieldcatalog
ok_code like sy-ucomm. "OK-Code
start-of-selection.
end-of-selection.
call screen 100.
*& Module PBO OUTPUT
* process before output
module pbo output.
set pf-status 'MAIN100'.
if tree1 is initial.
perform init_tree.
endif.
call method cl_gui_cfw=>flush.
endmodule. " PBO OUTPUT
*& Module PAI INPUT
* process after input
module pai input.
case ok_code.
when 'EXIT' or 'BACK' or 'CANC'.
perform exit_program.
when others.
call method cl_gui_cfw=>dispatch.
endcase.
clear ok_code.
call method cl_gui_cfw=>flush.
endmodule. " PAI INPUT
*& Form build_fieldcatalog
* build fieldcatalog for structure sflight
form build_fieldcatalog.
* get fieldcatalog
call function 'LVC_FIELDCATALOG_MERGE'
exporting
i_structure_name = 'SFLIGHT'
changing
ct_fieldcat = gt_fieldcatalog.
* change fieldcatalog
data: ls_fieldcatalog type lvc_s_fcat.
loop at gt_fieldcatalog into ls_fieldcatalog.
case ls_fieldcatalog-fieldname.
when 'CARRID' or 'CONNID' or 'FLDATE'.
ls_fieldcatalog-no_out = 'X'.
ls_fieldcatalog-key = ''.
when 'PRICE' or 'SEATSOCC' or 'SEATSMAX' or 'PAYMENTSUM'.
ls_fieldcatalog-do_sum = 'X'.
endcase.
modify gt_fieldcatalog from ls_fieldcatalog.
endloop.
endform. " build_fieldcatalog
*& Form build_hierarchy_header
* build hierarchy-header-information
* -->P_L_HIERARCHY_HEADER strucxture for hierarchy-header
form build_hierarchy_header changing
p_hierarchy_header type treev_hhdr.
p_hierarchy_header-heading = 'Hierarchy Header'. "#EC NOTEXT
p_hierarchy_header-tooltip =
'This is the Hierarchy Header !'. "#EC NOTEXT
p_hierarchy_header-width = 30.
p_hierarchy_header-width_pix = ''.
endform. " build_hierarchy_header
*& Form exit_program
* free object and leave program
form exit_program.
call method tree1->free.
leave program.
endform. " exit_program
*& Form build_header
* build table for html_header
* --> p1 text
* <-- p2 text
form build_comment using
pt_list_commentary type slis_t_listheader
p_logo type sdydo_value.
data: ls_line type slis_listheader.
* LIST HEADING LINE: TYPE H
clear ls_line.
ls_line-typ = 'H'.
* LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'ALV-tree-demo: flight-overview'. "#EC NOTEXT
append ls_line to pt_list_commentary.
* STATUS LINE: TYPE S
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = 'valid until'. "#EC NOTEXT
ls_line-info = 'January 29 1999'. "#EC NOTEXT
append ls_line to pt_list_commentary.
ls_line-key = 'time'.
ls_line-info = '2.00 pm'. "#EC NOTEXT
append ls_line to pt_list_commentary.
* ACTION LINE: TYPE A
clear ls_line.
ls_line-typ = 'A'.
* LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'actual data'. "#EC NOTEXT
append ls_line to pt_list_commentary.
p_logo = 'ENJOYSAP_LOGO'.
endform.
*& Form create_hierarchy
* text
* --> p1 text
* <-- p2 text
form create_hierarchy.
data: ls_sflight type sflight,
lt_sflight type sflight occurs 0.
* get data
select * from sflight into table lt_sflight
UP TO 200 ROWS .
sort lt_sflight by carrid connid fldate.
* add data to tree
data: l_carrid_key type lvc_nkey,
l_connid_key type lvc_nkey,
l_last_key type lvc_nkey.
loop at lt_sflight into ls_sflight.
on change of ls_sflight-carrid.
perform add_carrid_line using ls_sflight
changing l_carrid_key.
endon.
on change of ls_sflight-connid.
perform add_connid_line using ls_sflight
l_carrid_key
changing l_connid_key.
endon.
perform add_complete_line using ls_sflight
l_connid_key
changing l_last_key.
endloop.
* calculate totals
call method tree1->update_calculations.
* this method must be called to send the data to the frontend
call method tree1->frontend_update.
endform. " create_hierarchy
*& Form add_carrid_line
* add hierarchy-level 1 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_carrid_line using ps_sflight type sflight
p_relat_key type lvc_nkey
changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
ls_sflight type sflight.
* set item-layout
data: lt_item_layout type lvc_t_layi,
ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3P@'.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-style =
cl_gui_column_tree=>style_intensifd_critical.
append ls_item_layout to lt_item_layout.
* add node
l_node_text = ps_sflight-carrid.
call method tree1->add_node
exporting
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_sflight
it_item_layout = lt_item_layout
importing
e_new_node_key = p_node_key.
endform. " add_carrid_line
*& Form add_connid_line
* add hierarchy-level 2 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_connid_line using ps_sflight type sflight
p_relat_key type lvc_nkey
changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
ls_sflight type sflight.
* set item-layout
data: lt_item_layout type lvc_t_layi,
ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3Y@'.
ls_item_layout-style =
cl_gui_column_tree=>style_intensified.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
append ls_item_layout to lt_item_layout.
* add node
l_node_text = ps_sflight-connid.
call method tree1->add_node
exporting
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_sflight
it_item_layout = lt_item_layout
importing
e_new_node_key = p_node_key.
endform. " add_connid_line
*& Form add_cmplete_line
* add hierarchy-level 3 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_complete_line using ps_sflight type sflight
p_relat_key type lvc_nkey
changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value.
* set item-layout
data: lt_item_layout type lvc_t_layi,
ls_item_layout type lvc_s_layi.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-class = cl_gui_column_tree=>item_class_checkbox.
ls_item_layout-editable = 'X'.
append ls_item_layout to lt_item_layout.
l_node_text = ps_sflight-fldate.
call method tree1->add_node
exporting
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
is_outtab_line = ps_sflight
i_node_text = l_node_text
it_item_layout = lt_item_layout
importing
e_new_node_key = p_node_key.
endform. " add_complete_line
*& Form register_events
* text
* --> p1 text
* <-- p2 text
form register_events.
* define the events which will be passed to the backend
data: lt_events type cntl_simple_events,
l_event type cntl_simple_event.
* define the events which will be passed to the backend
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_checkbox_change.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
append L_EVENT to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
append L_EVENT to lt_events.
call method tree1->set_registered_events
exporting
events = lt_events
exceptions
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
* set Handler
data: l_event_receiver type ref to lcl_tree_event_receiver.
create object l_event_receiver.
set handler l_event_receiver->handle_node_ctmenu_request
for tree1.
set handler l_event_receiver->handle_node_ctmenu_selected
for tree1.
set handler l_event_receiver->handle_item_ctmenu_request
for tree1.
set handler l_event_receiver->handle_item_ctmenu_selected
for tree1.
endform. " register_events
*& Form change_toolbar
* text
* --> p1 text
* <-- p2 text
form change_toolbar.
* get toolbar control
call method tree1->get_toolbar_object
importing
er_toolbar = mr_toolbar.
check not mr_toolbar is initial.
* add seperator to toolbar
call method mr_toolbar->add_button
exporting
fcode = ''
icon = ''
butn_type = cntb_btype_sep
text = ''
quickinfo = 'This is a Seperator'. "#EC NOTEXT
* add Standard Button to toolbar (for Delete Subtree)
call method mr_toolbar->add_button
exporting
fcode = 'DELETE'
icon = '@18@'
butn_type = cntb_btype_button
text = ''
quickinfo = 'Delete subtree'. "#EC NOTEXT
* add Dropdown Button to toolbar (for Insert Line)
call method mr_toolbar->add_button
exporting
fcode = 'INSERT_LC'
icon = '@17@'
butn_type = cntb_btype_dropdown
text = ''
quickinfo = 'Insert Line'. "#EC NOTEXT
* set event-handler for toolbar-control
create object toolbar_event_receiver.
set handler toolbar_event_receiver->on_function_selected
for mr_toolbar.
set handler toolbar_event_receiver->on_toolbar_dropdown
for mr_toolbar.
endform. " change_toolbar
*& Form init_tree
* text
* --> p1 text
* <-- p2 text
FORM init_tree.
* create fieldcatalog for structure sflight
perform build_fieldcatalog.
* create container for alv-tree
data: l_tree_container_name(30) type c,
l_custom_container type ref to cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
if sy-batch is initial.
create object l_custom_container
exporting
container_name = l_tree_container_name
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
endif.
* create tree control
create object tree1
exporting
parent = l_custom_container
node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
item_selection = 'X'
no_html_header = ''
no_toolbar = ''
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
* create Hierarchy-header
data l_hierarchy_header type treev_hhdr.
perform build_hierarchy_header changing l_hierarchy_header.
* create info-table for html-header
data: lt_list_commentary type slis_t_listheader,
l_logo type sdydo_value.
perform build_comment using
lt_list_commentary
l_logo.
* repid for saving variants
data: ls_variant type disvariant.
ls_variant-report = sy-repid.
* create emty tree-control
call method tree1->set_table_for_first_display
exporting
is_hierarchy_header = l_hierarchy_header
it_list_commentary = lt_list_commentary
i_logo = l_logo
i_background_id = 'ALV_BACKGROUND'
i_save = 'A'
is_variant = ls_variant
changing
it_outtab = gt_sflight "table must be emty !!
it_fieldcatalog = gt_fieldcatalog.
* create hierarchy
perform create_hierarchy.
* add own functioncodes to the toolbar
perform change_toolbar.
* register events
perform register_events.
* adjust column_width
call method tree1->COLUMN_OPTIMIZE.
ENDFORM. " init_tree
regards,
venu. -
Example of a Simple ALV Report using Function Modules (not OO)
Hi,
I am new to ABAP. Where can I get a proper Example of a Simple ALV Report using Function Modules? I searched the forum but did not find a proper solution. Kindly help.
Smruthi.
Edited by: Smruthi Acharya on Jan 29, 2009 7:13 PMHi,
Use this demo code:-
REPORT z_alv01 MESSAGE-ID zmsg.
* TABLES
TABLES : ekpo.
* TYPE POOLS
TYPE-POOLS : slis.
* TYPE DECLARATION
TYPES : BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
matnr TYPE ekpo-matnr,
werks TYPE ekpo-werks,
menge TYPE ekpo-menge,
END OF t_ekpo.
* PARAMETERS
PARAMETERS : s_var TYPE disvariant-variant.
* DATA DECLARATION
*VARIABLES
DATA : check(1),
rep_id TYPE sy-repid.
*INTERNAL TABLE TYPE OF ZEKPO
DATA : it_ekpo TYPE STANDARD TABLE OF t_ekpo WITH HEADER LINE.
*FIELD CATALOG
DATA : it_field TYPE slis_t_fieldcat_alv,
wa_field TYPE slis_fieldcat_alv.
*SORTING
DATA : it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
*FOR TOP OF THE PAGE
DATA : it_top TYPE slis_t_listheader,
wa_top TYPE slis_listheader.
*FOR END OF THE PAGE
DATA : it_end TYPE slis_t_listheader,
wa_end TYPE slis_listheader.
*TO CAPTURE EVENTS AND HANDLE
DATA : it_event TYPE slis_t_event,
wa_event TYPE slis_alv_event.
*FOR GRID TITLE
DATA : wa_title TYPE lvc_title.
*FOR LAYOUT
DATA : wa_layout TYPE slis_layout_alv.
*FOR EXCLUDING STANDARD BUTTON FROM ALV TOOLBAR
DATA : it_exclude TYPE slis_t_extab,
wa_exclude TYPE slis_extab.
*FOR VARIANT
DATA : wa_variant TYPE disvariant.
* INITIALIZATION
INITIALIZATION.
check = 'X'.
rep_id = sy-repid.
wa_variant-report = sy-repid.
*GET DEFUALT ON THE SELECTION SCREEN FOR DEFAULT DISPLAY
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc = 0. " IF DEFAULT VARIANT FOUND
s_var = wa_variant-variant. " PASS THE DEFAULT VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN ON VALUE REQUEST
* TO GET THE F4 HELP FOR VARIANT
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = wa_variant
* I_TABNAME_HEADER =
* I_TABNAME_ITEM =
* IT_DEFAULT_FIELDCAT =
i_save = 'A'
* I_DISPLAY_VIA_GRID = ' '
IMPORTING
* E_EXIT =
es_variant = wa_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
s_var = wa_variant-variant. " PASS THE SELECTED VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN
* TO CHECK THE EXISTENCE FOR VARIANT
AT SELECTION-SCREEN.
wa_variant-variant = s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE w001.
ENDIF.
* START OF SELECTION
START-OF-SELECTION.
SELECT ebeln
ebelp
matnr
werks
menge
FROM ekpo
INTO TABLE it_ekpo.
* FIELD CATALOG
wa_field-fieldname = 'EBELN'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'PO #'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'EBELP'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Line Item'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MATNR'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 15.
wa_field-seltext_l = 'Material'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'WERKS'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 6.
wa_field-seltext_l = 'Plant'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MENGE'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Qty.'.
* wa_field-input = check.
* wa_field-edit = check.
wa_field-do_sum = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
* SORT W.R.T. PURCHASE ORDER NUMBER
wa_sort-spos = 1.
wa_sort-fieldname = 'EBELN'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = check.
wa_sort-subtot = check.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
* FOR GRID TITLE
wa_title = 'Hello'.
* FOR LAYOUT
wa_layout-zebra = check.
* FOR EXCLUDING STANDARD BUTTONS FROM ALV TOOLBAR
wa_exclude-fcode = '&OUP'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&ODN'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&OAD'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* wa_exclude-fcode = '&AVE'.
* APPEND wa_exclude TO it_exclude.
* CLEAR wa_exclude.
wa_exclude-fcode = '&INFO'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* POPULATE ALL EVENTS INTO INTERNAL TABLE
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_event
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE it_event INTO wa_event WITH KEY name = 'END_OF_LIST'.
wa_event-form = 'END'.
MODIFY it_event FROM wa_event INDEX sy-tabix.
CLEAR wa_event.
* DISPLAY RECORDS IN ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = rep_id
* i_callback_pf_status_set = 'PF'
i_callback_user_command = 'COMMAND'
i_callback_top_of_page = 'TOP'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
i_grid_title = wa_title
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_field
it_excluding = it_exclude
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
i_save = 'A'
is_variant = wa_variant
it_events = it_event
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form top
* TO WRITE THE HEADER
FORM top.
REFRESH it_top.
wa_top-typ = 'S'.
wa_top-key = text-001.
wa_top-info = rep_id.
APPEND wa_top TO it_top.
CLEAR wa_top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_top
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "top
*& Form end
* TO WRITE THE FOOTER
FORM end.
REFRESH it_end.
wa_end-typ = 'S'.
wa_end-key = text-001.
wa_end-info = rep_id.
APPEND wa_end TO it_end.
CLEAR wa_end.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_end
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "end
*& Form pf
* FOR PF-STATUS WITH USER DEFINED BUTTONS
* -->RT_EXTAB text
FORM pf USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTG_PF_ALV'.
ENDFORM. "pf
*& Form command
* TO HANDLE USER ACTIONS AGAINST PF-STATUS
* -->UCOMM text
* -->SELFIELD text
FORM command USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA : ok_code TYPE sy-ucomm.
ok_code = ucomm.
CASE ok_code.
WHEN 'T_DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL DOWN'.
WHEN 'DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'DOWN'.
WHEN 'UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'UP'.
WHEN 'T_UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL UP'.
ENDCASE.
ENDFORM. "command
Hope this helps you.
Thanks & Regards,
Tarun Gambhir -
Error in function module WWW_DISPATCH_REQUEST
Hi,
I am upgrading standalone ITS to integrated ITS.
In this process I refered to OSS notes number 979467. and i maintained all service files in WEBRFC service.
and when i am testing my services i am getting an error in the browser
saying:
'Error in function module WWW_DISPATCH_REQUEST'
Parameter Name Parameter value
sap-client 100
~USERAGENTTYPE M
~USERAGENTVERSION 6
~CALLED_FROM_ITS 6
~URLWGATE %_WEBRFC_HTTP_SERVICE
~SESSION SID:ANON:essap00_MIL_02:ByAZnf5VaI5DZcamNtjfwtDYdKZb5gkPV4oG3lBO-ATT
~URLIMAGEPATH C:\tmp\sapicons\
So i am not able to find an where i went wrong. Please suggest me or guide me to resolve the above error.
Thanks in advanceI am not sure this is an issue with getting the mime files for your webrfc service. If it is, please try the following:
From page 13 of the SAP document "Developing IACs with the SAP Integrated ITS"
MIME URL
MIME objects in the integrated ITS are accessed at runtime directly in the database. For this, a special ICF service mimes exists with the http request handler CL_HTTP_EXT_ITS_MIMES, which is stored in the ICF path defaulthost u2192 sap u2192 public u2192 bc u2192 its. It is used to fill parameter ~urlmime with the value /sap/public/bc/its/mimes. Also function mimeURL() returns this value as a result.
The ICF service mimes must be active if you want to execute an ITS service that accesses MIME objects.
Changes to the HTML templates are necessary only if the MIME URL in the ITS service does not contain the SAP default values.
Developing
Please also check out this OSS note 1076200 - WebReporting: Icon support for WebRFC Service
It may applies to your case.
The last parameter "~URLIMAGEPATH C:\tmp\sapicons\" may be the cause of the error.
Hope it helps.
Edited by: Danny Mak on Nov 23, 2009 8:03 PM -
SYNTAX ERROR in function module CACS_BUPA_PAI_SPECIAL_CACSB1
Hi experts,
I am trying to create business partner in SAP treasury module with role - general business partner and validity period 01/01/0001 - 12/31/9999. I am gettting syntax error in Function module CACS_BUPA_PAI_SPECIAL_CACSB1, it says
The key of internal table 'LT_BUT0BK' contains components of type 'X' or 'XSTRING'.
The "Read table LT_BUTOBK" statement is not permitted for such tables in a unicode context.
Please let me know if you have any solution for this.
Thanks in advance.
Edited by: Thanvi maraka on Apr 17, 2009 3:27 AMHello Thanvi
It seems that you need to apply the OSS note 1041283:
FUNCTION cacs_bupa_pai_special_cacsb1.
*"*"Lokale Schnittstelle:
DATA: lt_but0bk TYPE TABLE OF but0bk WITH HEADER LINE.
CALL FUNCTION 'BUP_BUPA_BUT0BK_GET'
TABLES
t_but0bk = lt_but0bk.
* einmal vorhanden -> nehmen; nicht vorhanden -> Feld muss leer sein
* mehrmals vorhanden -> Mussfeld
READ TABLE lt_but0bk INDEX 2.
IF sy-subrc NE 0.
* READ TABLE lt_but0bk. "NOTE 1041283 " <<<<<<<<<
READ TABLE lt_but0bk FROM lt_but0bk. " <<<<<<<<<
IF sy-subrc = 0.
cacs_s_bupaw-bank_id = lt_but0bk-bkvid.
ENDIF.
ELSE.
Regards
Uwe -
Error accessing function module: HELP
TO ADMINISTRATORS: PLEASE DO NOT DELETE. ADVISE WHICH FORUM TO POST.
Good Day to all SAP Gurus,
I need your help in resolving / understanding an error.
Envirornment - SAP IDES 4.7
While posting any document through FBCJ (Cash Journal), f.26 (incoming payment), f.22 etc., the below mentioned error is appearing.
Error accessing function module: FMFK_FIKRS_READ
Parameter: IP-FIKRS IP_FMA_OBJNR
When I click help (?), the following detailed message appears.
Diagnosis
The application has accessed a Funds Management or Cash Budget Management module with parameters missing or defective.
Can someone please help on this?
Points guaranteed.
Regards
Jamil1. Please do not offer points for replies. This is clearly mentioned in the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]. It is considered impolite and is the quickest way to have someone flag your message using the Abuse Button which usually means that the post will be deleted.
2. Per the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement], please title your subject appropriately. In particular, words such as "help" don't provide any insight into your message either when viewed directly or via search. This too is a possible Abuse violation and may be deleted by the other Moderators. A more appropriate title would be "posting Cash Journal document results in error XX-YYY (FMFK_FIKRS_READ)"... and it would help the others who would attempt to reply to your message if you provided the specific message number.
3. The financials forum is for functional questions. Since you are asking about a FM I'd recommend posting this question in one of the [ABAP Forums|/community [original link is broken];. Posting in the wrong forum won't lead to an abuse report but the message is likely to be locked to discourage other users to post in the correct forum.
Edited by: Nathan Genez on Oct 10, 2008 2:20 PM -
Internal error in functional module
Hi,
While the invoice is being posted in MIRO screen the system is giving the below error.
*Internal error in functional module*
*CKMW_CREATE_PO_HISTORY*
Message No. C+ 514
Thanks in advance to help me out from this problem.Hi,
Please check if the notes 1167399, 1015136, 1280056 and 1036588 help.
regards
Waman -
ERROR ACCESSING FUNCTION MODULE FMFK_FIKRS_READ
While crearting invoice or entering vendor invoice, the system gives me
following error.
ERROR ACCESSING FUNCTION MODULE FMFK_FIKRS_READ
PARAMETRE: IP_FIKRS IP_FMA_OBJNR
Can someone help!Actually I got the same error. I tried to debug abap not knowing what I was doing but just looking thru. I couldn't find anything. It won't allow me to post via f-02 or fb50.
I looked at this post and found someone else had the same problem via purhcase receipt. So I tried to do purchase receipt. The error message then changed slightly to " can not access the functional module" for FM etc.
It gave me a clue that the system is probably trying to access FM area. However it wasn't active in the global setting for the company.
Anyhow, I still created an FM area and assigned it to my company.
Then the error changed to FM update profile being missing. I fixed than and guess what >>>>> the error went away and I was able to post my document.
I am not sure what error it might cause in the future postings but I think it won't be unsolvable.
Hope this also works for you guys. -
Hi,
I get this error while posting a document -
Error accessing function module: FMFK_FKRS_READ parameter: IP_FIKRS IP_FMA_OBJNR
Same error apprears in GL/AR/AP.
Any suggestion?Hi,
Check the following notes 553048, 580494; it might solve your problem.
Regards,
Eli -
Alv grid using function module
hi all,
i am using editable alv grid. but i need to add a functionality by adding a button on toolbar on click on button a new blank row should be appended below where user can enter the new records. please suggest on this i am using alv grid using function module.Hi
check this program
BCALV_TEST_GRID_EDITABLE
when u execute the program, there is an alv which displays a set of records.
where we have a option to add new row to the alv.check it.
Hope this helps you. -
Display the long text in alv by using function modules
Hi all,
How to display the long text in alv by using function modules ?
Send me any sample code.
Thanks in advance
krupali.Hello KR,
Use READ_TEXT and concatenate the first lines of the text.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F01'
language = sy-langu
name = lv_name " purchase order with leading zeroes
object = 'EKKO'
TABLES
lines = t_lines
EXCEPTIONS
OTHERS = 8.
You can loop at t_lines and concatenate header in to some other field.
Best Regards,
Sasidhar Reddy Matli.
Edited by: Sasidhar Reddy Matli on Aug 13, 2008 12:25 PM -
One editable cell in alv grid using function module
Hello all,
Any one have an idea how to make a single editable cell in alv grid using function module, i mean to say
with out using object oriented programming.
Regards,
PrakashHi,
Using ALV List display it is possible.
Try this.
TYPE-POOLS:SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA:IT_EVENTS TYPE SLIS_T_EVENT.
data: begin of it_chg occurs 0,
index type sy-tabix,
end of it_chg.
DATA: X_EVENTS TYPE SLIS_ALV_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
NAME(10) TYPE C,
ZTERM TYPE C,
END OF ITAB.
PERFORM FILL_TABLE.
loop at itab where zterm = 'A'.
it_chg-index = sy-tabix + 3.
" addition 3 IS FOR FIELD LABELS
append it_chg.
clear it_chg.
endloop.
DATA:L_POS TYPE I VALUE 1.
CLEAR: L_POS.
L_POS = L_POS + 1.
**fieldcatalog
X_FIELDCAT-FIELDNAME = 'NAME'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '10'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-FIELDNAME = 'ZTERM'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '10'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
**events
REFRESH:IT_EVENTS.
CLEAR:X_EVENTS,IT_EVENTS.
X_EVENTS-NAME = SLIS_EV_END_OF_LIST.
X_EVENTS-FORM = 'MODIFY_LIST'.
APPEND X_EVENTS TO IT_EVENTS.
CLEAR X_EVENTS.
END-OF-SELECTION.
data lv_repid type sy-repid.
lv_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = lv_REPID
IT_FIELDCAT = IT_FIELDCAT
IT_EVENTS = IT_EVENTS
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form FILL_TABLE
text
FORM FILL_TABLE.
ITAB-NAME = 'AAA'.
ITAB-ZTERM = 'A'.
APPEND ITAB.
clear itab.
ITAB-NAME = 'ABC'.
ITAB-ZTERM = 'B'.
APPEND ITAB.
clear itab.
ITAB-NAME = 'TEST'.
ITAB-ZTERM = 'C'.
APPEND ITAB.
clear itab.
ITAB-NAME = 'BBB'.
ITAB-ZTERM = 'D'.
APPEND ITAB.
clear itab.
ITAB-NAME = '123'.
ITAB-ZTERM = 'E'.
APPEND ITAB.
clear itab.
ITAB-NAME = 'GEN'.
ITAB-ZTERM = 'A'.
APPEND ITAB.
clear itab.
ITAB-NAME = 'ALV'.
ITAB-ZTERM = 'F'.
APPEND ITAB.
clear itab.
ITAB-NAME = 'ALVTEST'.
ITAB-ZTERM = 'A'.
APPEND ITAB.
clear itab.
ENDFORM. "FILL_TABLE
*& Form MODIFY_LIST
text
FORM MODIFY_LIST.
data: l_lines type i.
describe table itab lines l_lines.
L_LINES = L_LINES + 3.
"because we have 3 lines extra occupied by lables.
"if we have header,i mean top of page add the no.of lines
"how many ever top of page have + 3 for labels.
DO L_LINES TIMES.
read table it_chg with key INDEX = sy-index.
if sy-subrc = 0.
**This code is for reading the out put line
**and modify accordinlg to our requiremnet.
**don't chnage this.
READ LINE SY-INDEX INDEX SY-LSIND.
IF SY-SUBRC = 0.
MODIFY LINE SY-INDEX INDEX SY-LSIND
FIELD FORMAT ITAB-NAME INPUT.
ENDIF.
ENDIF.
ENDDO.
ENDFORM. "MODIFY_LIST -
Adding a color to row of a alv grid using function modules
Can anybody clearly explains me how to add a color to a row to an alv grid using function module reuse_alv_grid_display.
thanks in advance
regards
anil.hi,
chk this ample pgm
report zxyz_0004
no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
matnr type mara-matnr,
mtart type mara-mtart,
maktx type makt-maktx,
color_line(4) type c,
tcolor type slis_t_specialcol_alv, "cell
end of imara.
data: xcolor type slis_specialcol_alv.
start-of-selection.
perform get_data.
perform write_report.
Get_Data
form get_data.
imara-matnr = 'ABC'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for ABC'.
append imara.
imara-matnr = 'DEF'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for DEF'.
append imara.
imara-matnr = 'GHI'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for GHI'.
append imara.
loop at imara.
if sy-tabix = 1.
imara-color_line = 'C410'. " color line
endif.
if sy-tabix = 2. "color CELL
clear xcolor.
xcolor-fieldname = 'MTART'.
xcolor-color-col = '3'.
xcolor-color-int = '1'. "Intensified on/off
xcolor-color-inv = '0'.
append xcolor to imara-tcolor.
endif.
modify imara.
endloop.
endform.
WRITE_REPORT
form write_report.
data: layout type slis_layout_alv.
layout-coltab_fieldname = 'TCOLOR'.
layout-info_fieldname = 'COLOR_LINE'.
perform build_field_catalog.
CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
is_layout = layout
it_fieldcat = fieldcat
tables
t_outtab = imara.
endform.
BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '18'.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Type'.
fc_tmp-fieldname = 'MTART'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '4'.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-emphasize = 'C610'. " color column
append fc_tmp to fieldcat.
endform.
<b>anil , pls chk this link also.
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm
very hlpful.</b>
rgds
anver
<b>pls mark points if ur issue solved</b>
Message was edited by: Anversha s
Message was edited by: Anversha s -
ALV Display by function modules
Hi,
I have data in internal table itab, Which having seven columns
I want to display all these data in gridlayout by using function modules.
Can you please guide me the logic how to do.
An also I want to display the headings for each column, then I have to display all data in internal table.HI,
Work on this....
TABLES:pernr.
TYPE-POOLS : slis.
INFOTYPES:
0001,
0002,
0008.
DATA : i_alv TYPE slis_fieldcat_alv OCCURS 0,
wa TYPE slis_fieldcat_alv.
DATA : i_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv,
i_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
i_event TYPE slis_t_event,
wa_event TYPE slis_alv_event,
v_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
DATA:v_line TYPE i.
DATA:BEGIN OF tab OCCURS 0,
pernr LIKE p0001-pernr, " Personalnumber
ename LIKE p0001-ename,
gbdat LIKE p0002-gbdat,
ansal LIKE p0008-ansal,
END OF tab.
START-OF-SELECTION.
GET pernr .
rp-provide-from-last p0001 space pn-begda pn-endda.
rp-provide-from-last p0002 space pn-begda pn-endda.
rp-provide-from-last p0008 space pn-begda pn-endda.
MOVE-CORRESPONDING p0001 TO tab.
MOVE-CORRESPONDING p0002 TO tab.
MOVE-CORRESPONDING p0008 TO tab.
APPEND tab.
END-OF-SELECTION.
DESCRIBE TABLE tab LINES v_line.
Check for output internal table
IF v_line = 0.
MESSAGE 'NO RECORDS FOUND' TYPE 'I'.
ELSE.
PERFORM zf_commentbuild.
PERFORM zf_event.
PERFORM zf_display.
ENDIF.
*& Form zf_display
text
FORM zf_display.
CLEAR wa.
wa-fieldname = 'PERNR'.
wa-tabname = 'TAB'.
wa-ref_fieldname = 'PERNR'.
wa-ref_tabname = 'PERNR'.
APPEND wa TO i_alv.
CLEAR wa.
wa-fieldname = 'ENAME'.
wa-tabname = 'TAB'.
wa-ref_fieldname = 'ENAME'.
wa-ref_tabname = 'P0001'.
wa-seltext_m = 'NAME OF EMPLOYEE'.
APPEND wa TO i_alv.
CLEAR wa.
wa-fieldname = 'GBDAT'.
wa-tabname = 'TAB'.
wa-ref_fieldname = 'GBDAT'.
wa-ref_tabname = 'P0002'.
wa-seltext_m = 'BIRTH DATE OF EMPLOYEE'.
APPEND wa TO i_alv.
CLEAR wa.
wa-fieldname = 'ANSAL'.
wa-tabname = 'TAB'.
wa-ref_fieldname = 'ANSAL'.
wa-ref_tabname = 'P0009'.
wa-seltext_m = 'ANNUAL SALARY OF EMPLOYEE'.
APPEND wa TO i_alv.
CLEAR wa.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZHRTEMPLATE'
i_structure_name = 'TAB'
i_background_id = 'ALV_BACKGROUND'
it_fieldcat = i_alv
it_sort = i_sort
i_save = 'X'
it_events = i_event
TABLES
t_outtab = tab
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE 'Error in ALV FM Parameters' TYPE 'I'.
ENDIF.
ENDFORM. "zf_display
*& Form zf_commentbuild
text
--> p1 text
<-- p2 text
FORM zf_commentbuild .
wa_header-typ = 'H'.
wa_header-info = 'SAMPLE REPORT'.
APPEND wa_header TO i_header.
CLEAR wa_header.
ENDFORM. " zf_commentbuild
*& Form zf_event
text
--> p1 text
<-- p2 text
FORM zf_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = i_event
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
READ TABLE i_event WITH KEY name = slis_ev_top_of_page INTO wa_event.
IF sy-subrc EQ 0.
MOVE v_top_of_page TO wa_event-form.
APPEND wa_event TO i_event.
ENDIF.
ENDFORM. "zf_event
*& Form top_of_page
text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'INBEV_LOGO'
it_list_commentary = i_header.
ENDFORM. "top_of_page
Reward me if useflu...or any doubts,let me know
sankar -
hi,
in alv's using fuction modules how to add pushbuttons in application tool bar?Hi Ganapathi,
Check out the list of Function Modules
ABAP_DOCU_DOWNLOAD Download ABAP documentation in HTML format.
APPL_LOG_DELETE With this function module you delete logs in the database according to specified selection conditions
APPL_LOG_DISPLAY With this function module you can analyze logs in the database.
APPL_LOG_DISPLAY_INTERN With this function module you can analyze logs in local memory, e.g. when you have only collected log records at runtime and do not want to write to the database.
APPL_LOG_INIT This function module checks whether the specified object or sub-object exists and deletes all existing associated data in local memory.
APPL_LOG_READ_DB With this function module you read the log data in the database for an object or sub-object according to specified selection conditions.
APPL_LOG_READ_INTERN With this function module you read all log data whose log class has at least the specified value, from local memory, for the specified object or sub-object.
APPL_LOG_SET_OBJECT With this function module, you create a new object or sub-object for writing in local memory. With a flag you can control whether the APPL_LOG_WRITE_... messages are written in local memory or are output on the screen.
APPL_LOG_WRITE_DB With this function module you write all data for the specified object or sub-object in local memory to the database. If the log for the object or sub-object in question is new, the log number is returned to the calling program.
APPL_LOG_WRITE_HEADER With this function module, you write the log header data in local memory.
APPL_LOG_WRITE_LOG_PARAMETERS With this function module, you write the name of the log parameters and the associated values for the specified object or sub-object in local memory. If this function module is called repeatedly for the same object or sub-object, the existing parameters are updated accordingly. If you do not specify an object or sub-object with the call, the most recently used is assumed.
APPL_LOG_WRITE_MESSAGE_PARAMS With this function module you write a single message, with parameters, in local memory. Otherwise the function module works like APPL_LOG_WRITE_SINGLE_MESSAGE.
APPL_LOG_WRITE_MESSAGES With this function module you write one or more messages, without parameters, in local memory.
APPL_LOG_WRITE_SINGLE_MESSAGE With this function module you write a single message, without parameters, in local memory. If no header entry has yet been written for the object or sub-object, it is created. If you do not specify an object or sub-object with the call, the most recently used is assumed.
ARFC_GET_TID will return the IP address of the terminal in hex.
BAL_CNTL_CREATE Create Control for log display
BAL_CNTL_FREE Release Control
BAL_CNTL_REFRESH Put new data in log display
BAL_DB_DELETE Delete logs from the database
BAL_DB_DEQUEUE Unlock log
BAL_DB_ENQUEUE Lock log
BAL_DB_LOAD Load logs from the database
BAL_DB_LOAD Load log(s)
BAL_DB_SAVE Save logs in the database
BAL_DB_SAVE Save log(s)
BAL_DB_SAVE_PREPARE Prepare save
BAL_DB_SEARCH Find logs in the database
BAL_DSP_LOG_DISPLAY Display messages in memory
BAL_DSP_LOG_DISPLAY Display Log
BAL_DSP_LOG_PARAMETERS Either output extended long text or call a callback routine (based on the data in BAL_S_LOG-PARAMS)
BAL_DSP_LOG_TECHNICAL_DATA Output all log header data
BAL_DSP_MSG_LONGTEXT Display message long text
BAL_DSP_MSG_PARAMETERS Either output extended long text or call a callback routine (based on the data in BAL_S_MSG-PARAMS)
BAL_DSP_MSG_TECHNICAL_DATA Output technical data of a message such as work area, error number, etc.
BAL_DSP_OUTPUT_FREE End output
BAL_DSP_OUTPUT_INIT Initialize output
BAL_DSP_OUTPUT_SET_DATA Set dataset to be displayed
BAL_DSP_PROFILE_DETLEVEL_GET Message hierarchy in DETLEVEL
BAL_DSP_PROFILE_NO_TREE_GET Display without tree (fullscreen)
BAL_DSP_PROFILE_POPUP_GET Display without tree (popup)
BAL_DSP_PROFILE_SINGLE_LOG_GET Standard profile (SLG1) for one log
BAL_DSP_PROFILE_STANDARD_GET Standard profile (SLG1) for a lot of logs
BAL_GLB_AUTHORIZATION_GET Assign authorization
BAL_GLB_AUTHORIZATION_RESET Reset authorization
BAL_GLB_CONFIG_GET Read configuration
BAL_GLB_CONFIG_SET Set configuration
BAL_GLB_MEMORY_EXPORT Put function group memory in ABAP-MEMORY
BAL_GLB_MEMORY_IMPORT Get function group memory from ABAP-MEMORY
BAL_GLB_MEMORY_REFRESH (Partially) reset global memory
BAL_GLB_MEMORY_REFRESH (Partially) initialize memory
BAL_GLB_MSG_CURRENT_HANDLE_GET Get current message handle
BAL_GLB_MSG_DEFAULTS_GET Get message defaults
BAL_GLB_SEARCH_LOG Find logs in memory
BAL_GLB_SEARCH_MSG Find messages in memory
BAL_LOG_CREATE Create log with header data
BAL_LOG_CREATE Create log with header data
BAL_LOG_DELETE Delete log (from database also at Save)
BAL_LOG_EXIST Check existence of a log in memory
BAL_LOG_HDR_CHANGE Change log header
BAL_LOG_HDR_CHECK Check log header data for consistency
BAL_LOG_HDR_READ Read log header and other data
BAL_LOG_MSG_ADD Put message in log
BAL_LOG_MSG_ADD Put message in log
BAL_LOG_MSG_CHANGE Change message
BAL_LOG_MSG_CHANGE Change message
BAL_LOG_MSG_CHECK Check message data for consistency
BAL_LOG_MSG_CUMULATE Add message cumulated
BAL_LOG_MSG_DELETE Delete message
BAL_LOG_MSG_DELETE Delete message
BAL_LOG_MSG_EXIST Check existence of a message in memory
BAL_LOG_MSG_READ Read message and other data
BAL_LOG_MSG_REPLACE Replace last message
BAL_LOG_REFRESH Delete log from memory
BAL_LOG_REFRESH Delete log from memory
BAL_MSG_DISPLAY_ABAP Output message as ABAP-MESSAGE
BAL_OBJECT_SELECT Read Application Log objects table record
BAL_OBJECT_SUBOBJECT Check whether object and subobject exist and the combination is allowed
BAL_SUBOBJECT_SELECT Read subobject table record
BP_EVENT_RAISE Trigger an event from ABAP/4 program
BP_JOBLOG_READ Fetch job log executions
CHANGEDOCUMENT_READ_HEADERS Get the change document header for a sales document, and put the results in an internal table.
Example:
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
objectclass = 'EINKBELEG'
objectid = l_objectid
username = space
TABLES
i_cdhdr = lt_cdhdr.
LOOP AT lt_cdhdr WHERE udate IN s_aedat.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = lt_cdhdr-changenr
TABLES
editpos = lt_editpos.
LOOP AT lt_editpos WHERE fname = 'LOEKZ'
AND f_new = 'L'.
p_desc = text-r01. " Cancel Contract
ENDLOOP.
ENDLOOP.
CHANGEDOCUMENT_READ_POSITIONS Get the details of a change document, and store them in an internal table. This will tell you whether a field was changed, deleted, or updated.
Example:
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
objectclass = 'EINKBELEG'
objectid = l_objectid
username = space
TABLES
i_cdhdr = lt_cdhdr.
LOOP AT lt_cdhdr WHERE udate IN s_aedat.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = lt_cdhdr-changenr
TABLES
editpos = lt_editpos.
LOOP AT lt_editpos WHERE fname = 'LOEKZ'
AND f_new = 'L'.
p_desc = text-r01. " Cancel Contract
ENDLOOP.
ENDLOOP.
CLAF_CLASSIFICATION_OF_OBJECTS Return all of the characteristics for a material
CLOI_PUT_SIGN_IN_FRONT Move the negative sign from the left hand side of a number, to the right hand side of the number. Note that The result will be left justified (like all character fields), not right justified as numbers normally are.
CLPB_EXPORT Export a text table to the clipboard (on presentation server)
CLPB_IMPORT Import a Text Table from the Clipboard (on presentation server)
COMMIT_TEXT To load long text into SAP
CONVERSION_EXIT_ALPHA_INPUT converts any number into a string fill with zeroes, with the number at the extreme right
Example:
input = 123
output = 0000000000000...000000000000123
CONVERSION_EXIT_ALPHA_OUTPUT converts any number with zeroes right into a simple integer
Example:
input = 00000000000123
output = 123
CONVERT_ABAPSPOOLJOB_2_PDF convert abap spool output to PDF
CONVERT_OTF Convert SAP documents (SAPScript) to other types.
Example:
CALL FUNCTION "CONVERT_OTF"
EXPORTING FORMAT = "PDF"
IMPORTING BIN_FILESIZE = FILE_LEN
TABLES OTF = OTFDATA
LINES = PDFDATA
EXCEPTIONS ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
CONVERT_OTFSPOOLJOB_2_PDF converts a OTF spool to PDF (i.e. Sapscript document)
CONVERT_TO_FOREIGN_CURRENCY Convert local currency to foreign currency.
CONVERT_TO_LOCAL_CURRENCY Convert from foreign currency to local currency
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_GET_WEEK will return the week that a date is in.
DATE_IN_FUTURE Calculate a date N days in the future.
DAY_ATTRIBUTES_GET Return useful information about a day. Will tell you the day of the week as a word (Tuesday), the day of the week (2 would be Tuesday), whether the day is a holiday, and more.(provided by Francois Henrotte)
DOWNLOAD download a file to the presentation server (PC)
DYNP_VALUES_READ Read the values from a dynpro. This function can be used to read the values from a report's selection screen too (Another example).
DYNP_VALUES_UPDATE Similar to DYNP_VALUES_READ, this function will allow the updating of fields on a dynpro. Very useful when you want to change a field based on the value entered for another field.
ENQUE_SLEEP Wait a specified period of time before continuing processing.
ENQUEUE_ESFUNCTION Lock an abap program so that it cannot be executed.
Example:
Set the parameters as follows:
RELID = 'ZZ'
SRTF2 = 0
SRTF = (your report name)
Please note that you should not use SY-REPID to pass your report name to the function. The value of SY-REPID will change as it is being passed to the function module, and will no longer hold the value of the calling report.
EPS_GET_DIRECTORY_LISTING return a list of filenames from a local or network drive
EPS_GET_FILE_ATTRIBUTES Pass in a filename and a path, and will return attributes for the file
F4_DATE displays a calendar in a popup window and allows user to choose a date, or it can be displayed read only.
F4_IF_FIELD_VALUE_REQUEST Use values from a DDIC table to provide a list of possible values. TABNAME and FIELDNAME are required fields, and when MULTIPLE_CHOICE is selected, more than one value can be returned.
F4IF_INT_TABLE_VALUE_REQUEST F4 help that returns the values selected in an internal table. Very handy when programming your very own F4 help for a field.
Example:
data:
begin of t_values occurs 2,
value like kna1-begru,
end of t_values,
t_return like ddshretval occurs 0 with header line.
t_values = 'PAR*'.
append t_values.
t_values = 'UGG'.
append t_values.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'BEGRU'
value_org = 'S'
tables
value_tab = t_values
return_tab = t_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
read table t_return index 1.
o_begru-low = t_return-fieldval.
if o_begru-low = 'PAR*'.
o_begru-option = 'CP'.
else.
o_begru-option = 'EQ'.
endif.
o_begru-sign = 'I'.
append o_begru to s_begru.
else.
o_begru = i_begru.
endif.
F4IF_SHLP_EXIT_EXAMPLE documents the different reasons to use a search help exit, and shows how it is done.
F4IP_INT_TABLE_VALUE_REQUEST This function does not exist in 4.6 and above. Use F4IF_INT_TABLE_VALUE_REQUEST instead.
FILENAME_GET popup to get a filename from a user, returns blank filename if user selects cancel
FORMAT_MESSAGE Takes a message id and number, and puts it into a variable. Works better than WRITE_MESSAGE, since some messages use $ as a place holder, and WRITE_MESSAGE does not accommodate that, it only replaces the ampersands (&) in the message.
FTP_COMMAND Execute a command on the FTP server
FTP_CONNECT Open a connection (and log in) to an FTP server
FTP_DISCONNECT Close the connection (and log off) the FTP server
FU CSAP_MAT_BOM_READ You can use this function module to display simple material BOMs. You cannot display BOM groups (for example, all variants of a variant BOM). as in transaction CS03. Current restrictions: You cannot display long texts. You cannot display sub-items. You cannot display classification data of BOM items for batches. You can only display one alternative or variant. You cannot enter an alternative for module CSAP_MAT_BOM_READ, so you always see alternative 01. The following example came from a posting on the SAP-R3-L mailing list.
Example:
data: begin of tstk2 occurs 0.
include structure stko_api02.
data: end of tstk2.
data: begin of tstp2 occurs 0.
include structure stpo_api02.
data: end of tstp2.
data: begin of tdep_data occurs 0.
include structure csdep_data.
data: end of tdep_data.
data: begin of tdep_descr occurs 0.
include structure csdep_descr.
data: end of tdep_descr.
data: begin of tdep_source occurs 0.
include structure csdep_source.
data: end of tdep_source.
data: begin of tdep_order occurs 0.
include structure csdep_order.
data: end of tdep_order.
data: begin of tdep_doc occurs 0.
include structure csdep_doc.
data: end of tdep_doc.
data: flg_warning like capiflag-flwarning.
call function 'CSAP_MAT_BOM_READ'
exporting
material = 'MAT100'
plant = '0001'
bom_usage = '1'
valid_from = '20.12.1996'
valid_to
importing
fl_warning = flg_warning
tables
t_stko = tstk2
t_stpo = tstp2
t_dep_data = tdep_data
t_dep_descr = tdep_descr
t_dep_source = tdep_source
t_dep_order = tdep_order
t_dep_doc = tdep_doc
exceptions
error = 1.
Function Group GRAP is now obsolete. SAP recommends using functions in function group SFES instead. Below is an overview of the changes.
G_SET_GET_ALL_VALUES Fetch values from a set.
GET_CURRENT_YEAR Get the current fiscal year.
Example:
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
BUKRS = '1000' " Company Code
DATE = SY-DATUM " Date to find fiscal year for
IMPORTING
CURRM = w_currm " Current Fiscal Month
CURRY = w_curry " Current Fiscal Year
PREVM = w_prevm " Previous Fiscal Month
PREVY = w_prevy. " Previous Fiscal Year
GET_GLOBAL_SYMBOLS Returns a list of all tables, select options, texts, etc for a program. Even includes the text definitions for the selection screen
GET_INCLUDETAB Returns a list of all INCLUDES in a program
GET_JOB_RUNTIME_INFO Get the current job number from a program. Also returns other useful info about the current job.
GUI_CREATE_DIRECTORY Create a directory on the presentation server
GUI_DELETE_FILE Replaces WS_FILE_DELETE. Delete a file on the presentation server
GUI_DOWNLOAD Replaces WS_DOWNLOAD. Download table from the app server to presentation server
GUI_EXEC Replaces WS_EXECUTE. Start a File or Program Asynchronously with WinExec
GUI_GET_DESKTOP_INFO Replaces WS_QUERY. Delivers Information About the Desktop (client)
GUI_REMOVE_DIRECTORY Delete a directory on the presentation server
GUI_RUN Start a File or Program Asynchronously with Shell Execute
GUI_UPLOAD Replaces WS_UPLOAD. Upload file from presentation server to the app server
HELP_START Display help for a field. Useful for doing AT SELECTION SCREEN ON VALUE REQUEST for those fields that do not provide F4 help at the DDIC level.
HELP_VALUES_GET_WITH_TABLE Show a list of possible values for F4 popup help on selection screens. This function module pops up a screen that is just like all the other F4 helps, so it looks like the rest of the SAP system. Very useful for providing dropdowns on fields that do not have them predefined.
Example:
tables: t001w.
DATA: lc_werks LIKE t001w-werks,
ltab_fields LIKE help_value OCCURS 0 with header line,
BEGIN OF ltab_values OCCURS 0,
feld(40) TYPE c,
END OF ltab_values.
*-- Set up fields to retrieve data
ltab_fields-tabname = 'T001W'.
ltab_fields-fieldname = 'WERKS'.
ltab_fields-selectflag = 'X'.
APPEND ltab_fields.
ltab_fields-tabname = 'T001W'.
ltab_fields-fieldname = 'NAME1'.
ltab_fields-selectflag = space.
APPEND ltab_fields.
*-- Fill values
select * from t001w.
ltab_values-feld = t001w-werks.
append ltab_values.
ltab_values-feld = t001w-name1.
append ltab_values.
endselect.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
EXPORTING
fieldname = 'WERKS'
tabname = 'T001W'
title_in_values_list = 'Select a value'
IMPORTING
select_value = lc_werks
TABLES
fields = ltab_fields
valuetab = ltab_values
EXCEPTIONS
field_not_in_ddic = 01
more_then_one_selectfield = 02
no_selectfield = 03.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the date is a holiday by checking the parameter HOLIDAY_FOUND.
Example:
data: ld_date like scal-datum default sy-datum,
lc_holiday_cal_id like scal-hcalid default 'CA',
ltab_holiday_attributes like thol occurs 0 with header line,
lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
date = ld_date
holiday_calendar_id = lc_holiday_cal_id
WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
HOLIDAY_FOUND = lc_holiday_found
tables
holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
CALENDAR_BUFFER_NOT_LOADABLE = 1
DATE_AFTER_RANGE = 2
DATE_BEFORE_RANGE = 3
DATE_INVALID = 4
HOLIDAY_CALENDAR_ID_MISSING = 5
HOLIDAY_CALENDAR_NOT_FOUND = 6
OTHERS = 7.
if sy-subrc = 0 and
lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HR_DISPLAY_BASIC_LIST is an HR function, but can be used for any data. You pass it data, and column headers, and it provides a table control with the ability to manipulate the data, and send it to Word or Excel. Also see the additional documentation here.
HR_GET_LEAVE_DATA Get all leave information (includes leave entitlement, used holidays/paid out holidays)
HR_IE_NUM_PRSI_WEEKS Return the number of weeks between two dates.
HR_PAYROLL_PERIODS_GET Get the payroll period for a particular date. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
EXPORTING
get_begda = w_begda
TABLES
get_periods = it_t549q
EXCEPTIONS
no_period_found = 1
no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
EXPORTING
get_pernr = w_pernr
get_pabrj = it_t549q-pabrj
get_pabrp = it_t549q-pabrp
TABLES
get_zl = it_zl
EXCEPTIONS
no_period_specified = 1
wrong_cluster_version = 2
no_read_authority = 3
cluster_archived = 4
technical_error = 5.
NOTE: it_zl-iftyp = 'A' absence
it_zl-iftyp = 'S' at work
HR_TIME_RESULTS_GET Get the time results for a payroll period. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
EXPORTING
get_begda = w_begda
TABLES
get_periods = it_t549q
EXCEPTIONS
no_period_found = 1
no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
EXPORTING
get_pernr = w_pernr
get_pabrj = it_t549q-pabrj
get_pabrp = it_t549q-pabrp
TABLES
get_zl = it_zl
EXCEPTIONS
no_period_specified = 1
wrong_cluster_version = 2
no_read_authority = 3
cluster_archived = 4
technical_error = 5.
NOTE: it_zl-iftyp = 'A' absence
it_zl-iftyp = 'S' at work
INIT_TEXT To load long text into SAP
K_WERKS_OF_BUKRS_FIND Return a list of all plants for a given company code.
LIST_FROM_MEMORY Retrieves the output of a report from memory when the report was executed using SUBMIT... EXPORTING LIST TO MEMORY. See also WRITE_LIST.
LIST_TO_ASCII convert an ABAP report (displayed on screen) from OTF to ASCII format
MBEW_EXTEND Get the stock position for the previous month. This displays the same info that you see in MM03.
MONTH_NAMES_GET It returns all the month and names in respective language.
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
Example:
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
MS_EXCEL_OLE_STANDARD_OLE will build a file, and automatically start Excel
OTF_CONVERT wraps several other function modules. Will convert OTF to ASCII or PDF
POPUP_TO_CONFIRM_LOSS_OF_DATA Create a dialog box in which you make a question whether the user wishes to perform a processing step with loss of data.
POPUP_TO_CONFIRM_STEP Create a dialog box in which you make a question whether the user wishes to perform the step.
POPUP_TO_CONFIRM_WITH_MESSAGE Create a dialog box in which you inform the user about a specific decision point during an action.
POPUP_TO_CONFIRM_WITH_VALUE Create a dialog box in which you make a question whether the user wishes to perform a processing step with a particular object.
POPUP_TO_DECIDE Provide user with several choices as radio buttons
POPUP_TO_DECIDE_WITH_MESSAGE Create a dialog box in which you inform the user about a specific decision point via a diagnosis text.
POPUP_TO_DISPLAY_TEXT Create a dialog box in which you display a two line message
POPUP_TO_SELECT_MONTH Popup to choose a month
POPUP_WITH_TABLE_DISPLAY Provide a display of a table for user to select one, with the value of the table line returned when selected.
PRICING Return pricing conditions in an internal table. Use structure TCOMK for parameter COMM_HEAD_1, and structure TCOMP for parameter COMM_ITEM_1, and set CALCULATION_TYPE to B. The pricing conditions will be returned in XOMV. You must fill TCOMP, and TCOMK with the appropriate values before callling the function in order for it to work.
PROFILE_GET Read an Entry in an INI File on the frontend
PROFILE_SET Write an Entry in an INI File on the frontend
READ_TEXT To load long text into SAP
REGISTRY_GET Read an Entry from the Registry
REGISTRY_SET Set an entry in the Registry
RFC_ABAP_INSTALL_AND_RUN Runs an ABAP program that is stored in the table PROGRAM when the MODE = 'F'. Table WRITES contains the ouput of the program. Allows you to run a program without having the source code in the target system.
RH_GET_ACTIVE_WF_PLVAR Return the active HR Plan
RH_GET_DATE_DAYNAME return the day based on the date provied
RH_START_EXCEL_WITH_DATA starts Excel with the contents of an internal table. This function finds Excel in the desktop registry. It also uses a local PC working directory to save the file (that's what the 'W' value for data path flag does). Very transparent to user!
RH_STRUC_GET Returns all related org info
RHP0_POPUP_F4_SEARK is a matchcode for any type of HR Planning object, including the possibility to fill the field that you want
Example:
Examples: search for any organizational structure
F4 = 'X'
PLVAR = '01'
OTYPE = 'O '
search for any persons
F4 = 'X'
PLVAR = '01'
OTYPE = 'P '
MULTI_SELECT = 'X' to allow multiple selection
EASY = 'X' for user-dependent matchcode
Unfortunately, the use of table BASE_OBJIDS is disabled, so you can't specify
a root for the hierarchy you display
RKD_WORD_WRAP Convert a long string or phrase into several lines.
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
RP_LAST_DAY_OF_MONTHS Determine last day of month
RPY_DYNPRO_READ Read dynpro, including screen flow
RPY_TRANSACTION_READ Given a transaction, return the program and screen or given a program and screen, return the transactions that use the program and screen.
RS_COVERPAGE_SELECTIONS Returns an internal table that contains a formatted list of all the selection parameters entered for a report. Table is ready to print out.
RS_REFRESH_FROM_SELECTOPTIONS Get the current contents of selection screen
RS_SEND_MAIL_FOR_SPOOLLIST Send message from ABAP/4 program to SAPoffice.
RS_VARIANT_CONTENTS Returns the contents of the specified variant in a table.
RSPO_DOWNLOAD_SPOOLJOB Download the spool from a program to a file. Requires spool number.
RSPO_RETURN_ABAP_SPOOLJOB Fetch printer spool according to the spool number informed.
RZL_READ_DIR If the server name is left blank, it reads a directory from local presentation server, otherwise it reads the directory of the remote server
RZL_READ_DIR_LOCAL Read a directory on the Application Server
RZL_READ_FILE Read a file from the presentation server if no server name is given, or read file from remote server. Very useful to avoid authority checks that occur doing an OPEN DATASET. This function using a SAP C program to read the data.
RZL_SLEEP Hang the current application from 1 to 5 seconds.
RZL_SUBMIT Submit a remote report.
RZL_WRITE_FILE_LOCAL Saves table to the presentation server (not PC). Does not use OPEN DATASET, so it does not suffer from authority checks!
SAP_CONVERT_TO_XLS_FORMAT Convert data to Microsoft Excel format.
SAPGUI_PROGRESS_INDICATOR Display a progress bar on the SAP GUI, and give the user some idea of what is happening
SAVE_TEXT To load long text into SAP
SCROLLING_IN_TABLE If you are coding a module pool and using a table control, you can use this function SCROLLING_IN_TABLE to handle any scrolling. (provided by Paul Kjaer)
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
SO_NEW_DOCUMENT_ATT_SEND_API1 Send a document as part of an email. The documentation is better than normal for this function, so please read it.
SO_SPLIT_FILE_AND_PATH Split a fully pathed filename into a filename and a path.
SO_SPOOL_READ Fetch printer spool according to the spool number informed. See also RSPO_RETURN_ABAP_SPOOLJOB
SO_WIND_SPOOL_LIST Browse printer spool numbers according to user informed.
SWD_HELP_F4_ORG_OBJECTS HR Matchcode tailored for organizational units. Includes a button so that you can browse the hierarchy too.
SX_OBJECT_CONVERT_OTF_PDF Conversion From OTF to PDF (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_PRT Conversion From OTF to Printer Format (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_RAW Conversion From OTF to ASCII (SAPScript conversion)
SXPG_CALL_SYSTEM you can check the user's authorization for the specified command and run the command. The command runs on the host system on which the function module is executed. The function module is RFC capable. It can therefore be run on the host system at which a user happens to be active or on another designated host system at which an R/3 server is active.
SXPG_COMMAND_CHECK Check whether the user is authorized to execute the specified command on the target host system with the specified arguments.
SXPG_COMMAND_DEFINITION_GET Read the definition of a single external OS command from the R/3 System's database.
SXPG_COMMAND_EXECUTE Check a user's authorization to use a command, as in SXPG_COMMAND_CHECK. If the authorization check is successful, then execute the command on the target host system.
SXPG_COMMAND_LIST_GET Select a list of external OS command definitions.
TERMINAL_ID_GET Return the terminal id
TH_DELETE_USER Logoff a user. Similar results to using SM04.
TH_ENVIRONMENT Get the UNIX environment
TH_POPUP Display a popup system message on a specific users screen.
TH_REMOTE_TRANSACTION Run a transaction on a remote server. Optionally provide BDC data to be used in the transaction
TH_USER_INFO Give information about the current user (sessions, workstation logged in from, etc)
TH_USER_LIST Show which users are logged into an app server
TMP_GUI_DIRECTORY_LIST_FILES Retrieve all of the files and subdirectories on the Presentation Server (PC) for a given directory.
When a value other than * or . is used for the filter, you will not get any directories, unless they match your wildcard filter. For example, if you entered *.png, then only files and directories that end in png will be returned by the function.
Example:
data: lc_directory like bdschko16-target_dir value 'C:\TEMP\',
lc_filter(20) type c default '.'.
li_file_count type i,
li_dir_count type i,
ltab_dir_table like sdokpath occurs 0 with header line,
ltab_file_file_table like sdokpath occurs 0 with header line.
call function 'TMP_GUI_DIRECTORY_LIST_FILES'
exporting
directory = lc_directory
filter = lc_filter importing
file_count = li_file_count
dir_count = li_dir_count
tables
file_table = ltab_file_table
dir_table = ltab_dir_table
exceptions
cntl_error = 1
others = 2.
UNIT_CONVERSION_SIMPLE convert weights from one UOM to another.
UPLOAD upload a file to the presentation server (PC)
UPLOAD_FILES Will load one or more files from app or presentation server
WEEK_GET_FIRST_DAY For a given week (YYYYMM format), this function returns the date of the Monday of that week.
WRITE_LIST Useful for writing out the list contents that result from the function LIST_FROM_MEMORY.
WS_DOWNLOAD Save Internal Table as File on the Presentation Server
WS_EXCEL Start EXCEL on the PC
WS_EXECUTE execute a program on a windows PC
WS_FILE_DELETE Delete File at the Frontend
WS_FILENAME_GET Call File Selector
WS_MSG Create a dialog box in which you display an one line message
WS_UPLOAD Load Files from the Presentation Server to Internal ABAP Tables
WS_VOLUME_GET Get the label from a frontend device.
WWW_LIST_TO_HTML After running a report, call this function to convert the list output to HTML.
I don't think there is any function module for ALV.
Even for more info Checkout the links
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
Regards,
Chandru
Maybe you are looking for
-
Need to add Message variant field in BD87 selection option
Hi Friends, We have a requirement to add "Message variant" field in BD87 selction screen. Our technical team is doing analysis from there end. Mean time we came to know that the field can be added through report variant in customiziting. If anyone kn
-
Toggling panels with tab key in lightroom
my tab key in lightroom 3 is not toggling one panel at a time rather it simply hides all side panels at the same time. What is happening?
-
Does anyone know what the accountsd process is?
Does anyone know what the accountsd process is? I see this running in Activity Monitor.
-
Unable to launch Premiere Elements 11
I can not launch Premiere Elements 11 anymore. I have used this software without any troubles for some months.Today, I got a Windows error message two seconds after launching the software (program stopped working correctly). I have rebooted/reinstall
-
How to call SKYPE from Flex application ?
The basic idea is this. I've got Flex application, to simplify the problem, let's say it's phonebook. Data in this phone book is pulled from SQL server and telephone numers are changing daily. I'm choosing a person, and I have button - CALL CONTACT .