ALV - Excel download Date field sits in the last Column

Hi,
I have custom ALV grid report using OOp . From the report i am exporting the results to an EXCEL, but the date columns in the report sits as last column the exported excel.
Any idea ?
Thanks
aRs

That is the default functionality of the ALV grid, it collects all the similar data types together and then donwloads the data.
If you don't want that, you will have write code yourself and download the data
Regards,
Ravi
Note - Please mark all the helpful answers

Similar Messages

Default Carriage return in the last column when data is downloaded to Excel

Problem:
When you download data into Excel and if the last column of your excel is a numeric field, XMLP will add a carriage return (special character) to your numeric field. This feild will be considered as character field by excel.
Work Around:
When you build the template, create an empty column as your last column and leave E (or end-for-each) in that empty column.
Note:
If the last column is a character column then you do not have to do this.

I originally had that END:VCARD without any carriage return.
But I still get an extra carriage return at the end when the JSP renders to VCF
I'm using Tomcat running on Linux.
I found this, article which implies (but does not explicitly say) JSP in general adds a newline to the last line:
http://www.caucho.com/resin-3.0/jsp/faq.xtp (But its not tomcat either, so maybe this info is irrelevant).
Edited by: shogo2040 on Dec 22, 2008 3:31 PM - changed rendered to VCF from rendered to JSP

ALV Excel download problem

Hi,
I am trying to download ALV report to excel but the columns in the o/p is appearing in two rows.
THe ALV report has 82 columns in o/p.Is there any restriction on the no of columns that can be downloaded in excel.Please help.
Thanks,
Sutapa.

Hi Sutapa,
Kindly go through this link below for ALV Excel Download:
Re: how to view alv grid output in excel format(not downloading to pc)
Hope it helps
Regrds
Mansi

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms.
How can i do this?

Hi,
You can select the Payment Term at PO Header Level.
When you book an invoice, that Payment Term will automatically defaulted to Invoice.
You can define Payment Term in AP.
Payment terms have one or more payment terms lines, each of which creates one scheduled payment. Each payment terms line and each corresponding scheduled payment has a due date or a discount date based on either a specific day of a month, such as the 15th of the month, or a number of days added to your terms date, such as 14 days after the terms date.
Payment Terms (Oracle Payables Help)

I am trying to Download the free Maverick 10.9.1 and it's sitting there showing "downloading" but nothing indicates for the last 15 minutes that it is really doing it? Anyone out there has ideas to hare?

I am trying to Download the free Maverick 10.9.1 and it's sitting there showing "downloading" but nothing indicates for the last 15 minutes that it is really doing it? Anyone out there has ideas to share?

When I downloaded it, it appeared as if nothing was happening but it actually was being downloaded! It took quite some time to download. I suspect the internet speed affects how quickly it moves.

On deleting an item "Name" column of recycle bin is updating with data in one of the custom column instead of title field in SP 2013 Custom list

On deleting an item, "Name" column of recycle bin is updating with data in one of the custom column instead of title field in SP 2013 Custom list.
Thanks, Chinnu

Hi,
According to your post, my understanding is that you want to update title field in recycle bin with other field value of the item.
We can use the ItemDeleting Event Receiver to achieve it.
While item is deleting, replace title field value with other field value using ItemDeleting event receiver, then in the recycle bin, the title value will replace with other field value.
However, there is an issue while restore the item from the recycle bin, the item title would be replaced.
As an workaround, we can create a helper field in the list to store the title field value while deleting, then replace back while restoring using
ItemAdded Event Receiver.
I have made a simple code demo below to achieve this scenario, it works like a charm(the
Test2 field is the helper field, you can hide it in the list), you can refer to it.
public override void ItemDeleting(SPItemEventProperties properties)
properties.ListItem["Test2"]=properties.ListItem["Title"];
properties.ListItem["Title"]=properties.ListItem["Test1"];
properties.ListItem.Update();
base.ItemDeleting(properties);
/// <summary>
/// An item was added.
/// </summary>
public override void ItemAdded(SPItemEventProperties properties)
base.ItemAdded(properties);
properties.ListItem["Title"] = properties.ListItem["Test2"];
properties.ListItem.Update();
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How do I get the last COLUMN in an Excel Sheet using Report Generation toolkit in LV7.1?

I am trying to get the last column in an Excel sheet using the Report Generation toolkit. The function "Excel Get Last Row" does not give last column info. Is there a function that will do this?
Thanks

Hello –
I think the following example program might be helpful to get you started programming your application.
Get Excel Data from Specified Field.
Hope this helps!
SVences
Applications Engineer
National Instruments

I get my itunes 10 to download so far but at the last bit it freezes on the download and I cant get any further!! gggrrr anybody have an answer??

I get itunes 10 to download so far but at the last bit it freezes and I cant get it to finish!! grrr
this has happened 5 times now!!!! HELP PLEASE???

I don't know of a definite answer for this.
Things you could try:
Restart your PC.
Try a different browser.
Failing that, get a friend to download the installer for you and put it on a USB memory stick for you.

Emacs is displaying the first column of the line on the last column of the previous line

The first column of my lines are being displayed on the last column of the previous line. This a very irritating glitch that I have no clue how to fix or even troubleshoot. (red bars were added using preview to hide personal info)
I've downloaded MacPorts and reinstalled emacs:
GNU Emacs 24.4.1
Copyright (C) 2014 Free Software Foundation, Inc.
GNU Emacs comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of Emacs
under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING.
I'm open to any suggestions on how to fix this graphical glitch.
Much thanks
Message was edited by: Conner_36

Given that the Emacs for OS X works ok and the Emacs shipped with OS X works it would seem to be some issue with MacPorts and their version.
Totally unfamiliar with MacPorts so have no idea how the program gets compiled,what libraries it is using and what if any config settings are needs or set so I'm afraid I won;t be much help there. That you are on a MBP with a retina display may be part of the problem.
So with the setup you have now, hardware and software including OS, it was working and then just like that it stopped? Something much have changed around the time it stop working if you can think back to then it might help you resolve the problem.
As you are doing programming can i assume you have Xcode and the command line tools installed? If not how do you compile your code? The reason I ask is compiling Emacs from there GNU source is not all that difficult. It might be worth trying that.
One last thing given that the two other versions of Emacs displayed the file OK this strongly suggests the problem is not in your .emacs file or your environment however as I wrote I am not familiar with MacPorts so it is possible there is another config file messing you up. As a test for this create a new user or log in as the Guest user (this is best as you;re guaranteed the environment is clean) and look at the file in question in MacPorts Emacs. If it displays OK then there is something in your environment causing this, If it messes up even in the new user then I'd say ditch MacPorts..
regards
<edit>
Just to rule out init files if you start emacs with the -q(minus que) flag the .emacs file is not read in, if you use --no-site-file it will not load the site file if it exists.
I'd try running the MacPorts emacs with those two flags to see f anything changes.

Know the Last column of the table

Hello
i use vb.net with excel
I have a table
with a spreadsheet, I want to know the Last
column of the table
please help me ??

i have a table in Excel file and i want to add the last column of this table in datagridview
i want to set ShtRange to give me the last column
i use this but don't give me a result
With Form1.xlWorkSheet
Dim ShtRange As Range
Dim dt As New System.Data.DataTable
ShtRange = Form1.xlWorkSheet.Cells(1, Form1.xlWorkSheet.Columns.Count).End(XlDirection.xlToLeft)
For Cnum As Integer = 1 To ShtRange.Columns.Count
dt.Columns.Add(New DataColumn(TryCast(ShtRange.Cells(1, Cnum), Excel.Range).Value.ToString()))
Next
dt.AcceptChanges()
Dim columnNames As String() = New String(dt.Columns.Count - 1) {}
For i As Integer = 0 To dt.Columns.Count - 1
columnNames(0) = dt.Columns(i).ColumnName
Next
For Rnum As Integer = 2 To ShtRange.Rows.Count
Dim dr As DataRow = dt.NewRow()
For Cnum As Integer = 1 To ShtRange.Columns.Count
If TryCast(ShtRange.Cells(Rnum, Cnum), Excel.Range).Value2 IsNot Nothing Then
dr(Cnum - 1) = TryCast(ShtRange.Cells(Rnum, Cnum), Excel.Range).Value2.ToString()
End If
Next
dt.Rows.Add(dr)
dt.AcceptChanges()
Next
Me.DataGridView1.DataSource = dt
End With
this is my table :

How to get the last column info of the given table

Hi All,
I want to get the last column information like :
column name, datatype of the last column in the given
table use PL statement. Please help.
Thanks,
JP

SCOTT@orcl SQL> desc emp
Name                                                  Null?    Type
EMPNO                                                 NOT NULL NUMBER(4)
ENAME                                                          VARCHAR2(10)
JOB                                                            VARCHAR2(9)
MGR                                                            NUMBER(4)
HIREDATE                                                       DATE
SAL                                                            NUMBER(7,2)
COMM                                                           NUMBER(7,2)
DEPTNO                                                         NUMBER(2)
SCOTT@orcl SQL> select column_name, data_type from user_tab_columns
2 where table_name = 'EMP'
3 and column_id = (select max(column_id) from user_tab_columns
4 where table_name = 'EMP');
COLUMN_NAME                    DATA_TYPE
DEPTNO                         NUMBER
SCOTT@orcl SQL>

Unable to filter the report by clicking the last column's name

Hi,
I have interactive report page having lots of column. All columns were not fitting in the screen so I added a code in the region--- header and footer section---
<div style="overflow: auto; width: 1220px; height: 700px;">
I got a scroll bar at the bottom. But a new problem arised. When I am trying to filter the report by clicking the column name in the report page , a popup is opening for the first column but the pop up is not opening for the last column. For the middle columns, the popup is opening but not below its name. This pop is for filtering the report based on that columns.
Please give some idea to fix this bug.
Thanks,
Chandra Bhanu

You could try to display as many columns as fit your screen, and put the rest of your columns as form fields in a detail view, somewhat like this:
http://apex.oracle.com/pls/apex/f?p=vincentdeelen:report_details_in_iframe_v1
Please tell the steps how to do it.
Thanks,
Chandra Bhanu

A special character in the last column in my external table

Hello,
I'v made a external table that looks like this :
CREATE
TABLE "REC_XLS"
"FINANCE_DATE" VARCHAR2(50 BYTE),
"CREATION_DATE" VARCHAR2(50 BYTE),
"SENT_DATE" VARCHAR2(50 BYTE),
"REMARKS" VARCHAR2(200 BYTE),
"REMAINING_QUANTITY" VARCHAR2(30 BYTE),
"CODE" VARCHAR2(30 BYTE)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER DEFAULT DIRECTORY "LOADER" ACCESS PARAMETERS (
RECORDS DELIMITED BY newline LOAD WHEN CODE!=BLANKS Skip 1 FIELDS
TERMINATED BY 0X'09' MISSING FIELD VALUES ARE NULL REJECT ROWS
WITH
ALL NULL FIELDS ( Finance_date,
creation_date, sent_date, Remarks,
remaining_quantity, code) location ( 'Finance.tsv' )
I exported the result in xls file and I saw in the last column a special character. The result of a copy and paste is prenseted here : "ABE
You should notice that the last quote is in the upper line instead of at the end of ABE. This means, I think, that there is a carriage return at the end. And the 0X'09' is the tab separator. How can I get rid of this character ?

my guess is that you run the load on unix server which uses default LF end-of-line character and the file has dos CRLF end-of-line, the easiest option is to change records delimiter in the DDL and replace "RECORDS DELIMITED BY newline" with code below
RECORDS DELIMITED BY '\r\n'in general end-of-line can be really any character, sample above shows CRLF but it can be TAB, space, | or any other character or set of characters. I have samples of special characters on my blog http://jiri.wordpress.com/2009/01/29/oracle-external-tables-by-examples-part-1/
hope this helps
jiri

How do I create a new row on tab out of the last column, last row?

JDev 11.1.2.1.0.
I've seen a few topics on this but none that I think were really very good solutions.
Use Case:
On tab out of the last column in the last row, a new row should be added to the end of the table. Bonus points for setting the focus to the first <af:inputText> of the newly created row.
Complications:
1. I'm having a heck of a time trying to find a function that returns the column's displayed index. Sadly, <column binding>.getDisplayIndex() returns -1 unless the user has manually re-ordered the column.
2. Value Change Listeners only fire if there is a value change. Guess that means I need to do client/server listeners to check each and every <af:inputText> for a tab press?
3. I'm not even going to get into setting the focus. With all the templates, regions, etc. going on, it's dang near impossible.
Any ideas on how to attack this one?
Will

Hi,
You will need to use the Run Engine Installation Wizard found on the Tools menu. In addition you need to create a installation set for the operator interface.
Look at Chapter 16 Distrubuting TestStand ( chapter 17 for version 2).
Once you have created your installation, install is on your new system.
The serial number etc is part of the process model. When you run the entry point 'Test UUTs' the PreUUT callback is executed which asks the user for the serial number.
Hope this helps
Ray Farmer
Regards
Ray Farmer

Finder in column view has no expander divider on the last column

I deal with a lot of graphics on my computer and I have a lot of subfolders. While in finder in column view there is no expanding divider for the last column when it is showing a graphic. When I first open a photo or graphic in finder the last column shows the graphic smaller than regular size. In SL there was a column divider to expand only that last column so I could make the graphic larger to see it better. Now in Lion there is no divider on the right side of that last column to expand the last column where the grahic is showing. In order for it to finally expand I have to drag the right side of the Finder window all the way across my display until the bottom slider bar disappears and then that last column will expand. This is frustrating having to have my Finder all across my display just to get the graphic larger.
Is there a way to get an expander divider to show up for the last column when viewing a graphic in column view? I know I can click on the "eye" icon to see it, but the column view will expand the graphic larger than 100% so I can see more details.
Thanks for any and all help.
Connie

Yes, that is how my whole finder window expands across my display until the bottom slider bar disappears....then and only then does the last column expand. I have to have open as many as 8 columns to get to my graphic. Keeping the Finder window to a smaller size and using the bottom slide bar to navigate to the far right column is nice, but all I want is that far right column where my graphic is showing to expand so I can see it better.
Thanks but what you suggest only resizes the whole Finder window until it can expand no further, then the last column expands the graphic. But then my whole display is a huge Finder window.

ALV - Excel download Date field sits in the last Column

Similar Messages

Maybe you are looking for